TD1003 Bollard Style Grips
2
Bollard Style Tensile Grips Bulletin TD-1003 Grip Reference HT56 Grip Reference HT33 Grip Reference HT34 Description: Elastic filament grip. Fitted with rubber faced jaws, spring loaded to retain the specimen prior to applying the final gripping pressure via a knurled thumb wheel. Used On: Benchtop materials testing machines Applications: Elastic and nylon filaments, threads and yarns Specifications: Max. Capacity 1.5 kN/300 lbf Min Loadcell 50 N/10 lbf Max Specimen Width 5 mm/0.2 in Max Specimen Thickness 2.5 mm/0.1 in Length Each 80 mm/3.15 in Weight Each 170 g/0.37 lb Temperature Limits -30 to 70 °C Description: Single bollard grip. The free end of the test specimen is held in a vise clamp. The specimen is then wrapped around a single friction bollard; this friction bollard reduces the concentration of stress at the clamping point and prevents premature breakage of the specimen. Used On: Benchtop materials testing machines Applications: Yarn, threads, wool, cables, fishing line Specifications: Max. Capacity 2 kN/400 lbf Min Loadcell 50 N/10 lbf Max Specimen Diameter 5 mm/0.2 in Length Each 70 mm/2.75 in Weight Each 350 g/0.77 lb Temperature Limits -30 to 70 °C Description: Soft wire grip. The clamping force on the wire is exerted between two aluminum discs. Used On: Benchtop materials testing machines Applications: Fine ductile wire Specifications: Max. Capacity 2 kN/400 lbf Min Loadcell 20 N/4 lbf Max Specimen Diameter 1.5mm/0.06 in Length Each 80 mm/3.14 in Weight Each 140 g/0.31 lb Temperature Limits -30 to 70 °C
-
Upload
marcelo-sanchez -
Category
Documents
-
view
15 -
download
6
Transcript of TD1003 Bollard Style Grips
Bollard Style Tensile Grips
Bulletin TD-1003
Grip Reference HT56 Grip Reference HT33 Grip Reference HT34
Description: Elastic filament grip.Fitted with rubber faced jaws, springloaded to retain the specimen prior toapplying the final gripping pressure viaa knurled thumb wheel.
Used On: Benchtop materials testingmachines
Applications: Elastic and nylon filaments, threads and yarns
Specifications:Max. Capacity 1.5 kN/300 lbfMin Loadcell 50 N/10 lbfMax Specimen Width 5 mm/0.2 inMax Specimen Thickness 2.5 mm/0.1 inLength Each 80 mm/3.15 inWeight Each 170 g/0.37 lbTemperature Limits -30 to 70 °C
Description: Single bollard grip. Thefree end of the test specimen is held ina vise clamp. The specimen is thenwrapped around a single friction bollard; this friction bollard reduces theconcentration of stress at the clampingpoint and prevents premature breakageof the specimen.
Used On: Benchtop materials testingmachines
Applications: Yarn, threads, wool,cables, fishing line
Specifications:Max. Capacity 2 kN/400 lbfMin Loadcell 50 N/10 lbfMax Specimen Diameter 5 mm/0.2 inLength Each 70 mm/2.75 inWeight Each 350 g/0.77 lbTemperature Limits -30 to 70 °C
Description: Soft wire grip. Theclamping force on the wire is exertedbetween two aluminum discs.
Used On: Benchtop materials testingmachines
Applications: Fine ductile wire
Specifications:Max. Capacity 2 kN/400 lbfMin Loadcell 20 N/4 lbfMax Specimen Diameter 1.5mm/0.06 in Length Each 80 mm/3.14 inWeight Each 140 g/0.31 lbTemperature Limits -30 to 70 °C
© 2004, Tinius Olsen 8/04 1M 04-69 Printed in U.S.A.
Contact Your Local Representative:
Description: Double bollard grip. A vise clamp holds the free end of thespecimen, the specimen is thenwrapped around two bollards in a figure 8 configuration. Friction on thebollards reduces the stress at theclamp point, preventing premature failure of the specimen.
Used On: Benchtop materials testingmachines
Applications: Light rope, ductile wireand cord
Specifications:Max. Capacity 20kN/4,000 lbfMin Loadcell 50 N/10 lbfMax Specimen Diameter 6 mm/0.23 inLength Each 135 mm/5.3 inWeight Each 850 g/1.87 lbTemperature Limits -30 to 70 °C
High and low temperature options available for use in temperature chambers.
Specifications subject to change without notice.
Grip Reference HT29 Grip Reference HT43 Grip Reference HT32
1065 Easton RoadHorsham, PA 19044 USA(215) 675-7100Fax (215) [email protected]
6 Perrywood Business ParkHoneycrock Lane, SalfordsRedhill, Surrey RH1 5DZ England+44 (0) 1737 765001Fax +44 (0) 1737 764768
Description: Single bollard self tighten-ing grip. The specimen is wrappedaround the split bollard and retainedbetween two serrated jaw faces. The large circumference of the bollardreduces the concentration of stresswithin the specimen at the point of clamping thereby preventing breaks occurring between the jaw faces.
Used On: Benchtop materials testingmachines
Applications: Light ropes, cords cablesflexible tubing, flexible tape, fishing line
Specifications:Max. Capacity 10 kN/2,000lbfMin Loadcell 100 N/20 lbfMax Specimen Width 30 mm/1.2 inMax Specimen Thickness 15 mm/0.6 inLength Each 130 mm/5.1 inWeight Each 1 kg/2.2 lbTemperature Limits -30 to 70 °C
Description: Designed for testing fabric, webbing, strapping, and similarmaterials. The specimen is wrappedaround the 2“ (50 mm) diametersmooth spools with its end securelyheld between the serrated faces of thesplit spools.
Used On: LoCaps, benchtop testers,Super L hydraulic testers machines andElectomatic materials testing machineswith closed crossheads
Applications: Fabric, webbing, strapping, and other similar flexible flatmaterial
Specifications:Maximum Capacity 11kN/5,000 lbfMax. Width 23mm/0.9 inMax. Thickness 7.6 mm/0.3 inLength Each 40 mm/1.6 inWeight Each1 50 g/0.33 lbTemperature Limits -30 to 70 °C
