TCORD_TL16US22
Transcript of TCORD_TL16US22
7/28/2019 TCORD_TL16US22
http://slidepdf.com/reader/full/tcordtl16us22 1/2
Tensioned rubber panel,Trellex T-Cord Trellex T-Cord is the all-round rubber screen cloth with vir-tually unlimited potential.q Can be designed for all types of applications.q Just as effective in quarries and gravel pits as in mines
and steelworks.q Easy to install,has a long service life.
Trellex T-Cord is manufactured in thickness of 5,7,10,15,20,25,35 and 50 mm with hole sizes as required.The holescan be square,round or slotted,or any shape required and
they can be punched in optimal patterns for each indivi-dual installation.
S c r e eni n
gM e d i a
www.m et s om
i n er al s . c om
Trellex T-Cord TensionedRubber Panels
Unique wear strength and service life Trellex T-Cord is made of Trellex high-strength wear resi-
stant rubber,which has been specifically designed for themineral processing industry.
The screen cloth comprised of a thin bottom layer of hot
stretched cord and a top-heavy duty wear surface of Trellexrubber.
The specially treated cord gives the screen cloth unique
resistance to deformation during operation,which is yourguarantee for truly efficient screening.
Reduced Service Costs Trellex T-Cord enables higher profits to be achieved byreducing service costs.Long service life means lower wearcost per ton of screened material. The screen cloth does
not have to be replaced so frequently, which means lessdown time.Production volume can be increased, so personnel can
spend more time on other important tasks. There is no need for continuous adjustment of the cloth,
because Trellex T-Cord maintains its form.
TCO rubber panel
Cost
Pay Off Year
Steel
7/28/2019 TCORD_TL16US22
http://slidepdf.com/reader/full/tcordtl16us22 2/2
Standards:q All panels 5 mm,7 mm and 10 mm thick include wear
strips for bucker bar protection and premature wear.
q All panels over 5 feet wide require either a center holddown bar or a staggered hold down bar.
q Maximum panel length is 60”.
q
If drop height is over 3 feet on to the panel, either animpact pad or thicker screen panel should be used at theimpact point.
q To avoid pegging and blinding,screen panel thickness
should not exceed hole size.For maximum efficiency,thehole size should be at least 1.25 times the screen panelthickness.
Environment benefitWith the use of rubber screen cloths,a noise reduction isvery noticeable, reducing complaints from the neighbors
and creating a better working environment for your per-sonnel.
Application of Trellex T-Cord tension panels
Trellex T-Cord panels are the most widely found in mediumcoarse to medium fine screening applications.The multiplethickness range allows the customer to use the same type
of media though out his plant.
S c r e e n i n g M e d i a
w w w . m e t s o m i n e r a l s . c o m
Metso Minerals Screening Media (TL16US22)1402 East Old Hwy 40,Warrenton,MO 63383,USA
Tel +1 800 325 4975 Fax +1 636 456 4416The above inform atio n is a general description on ly,i t is not guaranteed and contains no w arrant ies of any kind
Minimum thickness Maximum lump size(mm) (inch)
5 3/4
7 110 11/2
15 21/2
20 31/2
25 435 6
50 8
Trellex T-Cord thickness guidelines