TC 13-26 3 July 2013

Commonwealth of Australia Gazette

No. TC 13/26, Wednesday, 3 July 2013 Published by the Commonwealth of Australia

TARIFF CONCESSIONS

CONTENTS

TCO Applications ....................................................................................................... 2

TCO Applications Reworded..................................................................................... 7

TCO Applications Refused ........................................................................................ 8

TCOs Made.................................................................................................................. 9

Local Manufacturer Initiated - TCO Revocation Requests .................................. 11

Local Manufacturer Initiated - TCOs Revoked ...................................................... 12

TCOs Revoked - Unused for over 2 years ............................................................. 14

TCOs Revoked and Re-Issued - Classification Change ....................................... 15

Section 273 Determinations Made .......................................................................... 17

By-Laws Made .......................................................................................................... 21

Cheese Quota Allocation ......................................................................................... 22

Cheese Quota Transfers .......................................................................................... 24

The Australian Customs and Border Protection Service (Customs and Border Protection) publishes the Commonwealth of Australia Tariff Concessions Gazette (the Tariff Concessions Gazette) free of charge on the Customs internet site at: http://www.customs.gov.au

Please select “tariff”, then “tariff concessions gazette”. The gazettes are listed in date order and may be selected from the list of Adobe (PDF) file

General Inquiries: ..............................................................(02) 6275 6404 Facsimile: ...........................................................................(02) 6275 6376

Cat. No.

ISSN 0813-8389

©Commonwealth of Australia, 2013

http://www.customs.gov.au/

2 TCO Applications Commonwealth of Australia Gazette

No TC 13/26, Wednesday, 03 Jul 2013

TCO Applications

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS

Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.

Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described

are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days

of the date of publication of this Notice.

The operative date (Op.) and TC reference number follow the description of goods.

To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.

Objections to the making of TCO submission forms are available at hyperlink

http://www.customs.gov.au/webdata/resources/files/TYPABLEB4442001.pdf.

For guidance on the required description style, phone 02 6275 6404, fax 02 6275 6376 or email

[email protected].

THE TABLE

Description of Goods including the Schedule 4 Item Number

Customs Tariff Classification General Duty Rate

3908.90.00 POLYAMIDE, in granular form, having ALL of the following:

(a) melting temperature NOT less than 250 degrees C;

(b) density NOT greater than 1.03 g/cm3;

(c) refractive index (nD) at 589 nm of 1.516

Op. 27.05.13 - TC 1317194

Stated Use:

Injection moulded articles such as optical lens, lamp lens,

sight glass, inspection plate, medical device, CPAP mask

components

Applicant: DUROMER PRODUCTS PTY LTD

50

5%

3923.90.00 HOLDERS, LIPSTICK, plastic

Op. 07.06.13 - TC 1319209

Stated Use:

For storage and carriage of lipstick

Applicant: QUADPACK AUSTRALIA PTY LTD

50

5%

4016.99.00 ANNULAR PACKING SUBASSEMBLIES, BLOWOUT PREVENTER, OIL AND/OR

GAS PRODUCTION, consisting of nitrile rubber packer AND donut on

a steel frame

Op. 03.06.13 - TC 1318098

Stated Use:

Provides high pressure seals in several locations on the blow

out preventer in offshore oil and gas production

Applicant: SEDCO FOREX INTERNATIONAL INC

50

5%

4803.00.90 TABLE NAPKIN STOCK, wood cellulose, single ply OR multi-ply, in

rolls having a width NOT less than 400 mm and NOT greater than

475 mm

Op. 30.05.13 - TC 1317649

Stated Use:

Rolls are converted into finished paper napkins (table linen)

Applicant: THE CASTAWAY PAPER PRODUCTS CO PTY LTD

50

5%

http://www.customs.gov.au/webdata/resources/files/TYPABLEB4442001.pdf

mailto:[email protected]





4818.30.00 TABLE NAPKIN STOCK, wood cellulose, single ply OR multi-ply, in

rolls having a width NOT less than 230 mm and NOT greater than

310 mm

Op. 30.05.13 - TC 1317650

Stated Use:

Rolls are converted into finished paper napkins (table linen)

Applicant: THE CASTAWAY PAPER PRODUCTS CO PTY LTD

50

5%

7210.49.00 STEEL, flat rolled, non alloy, hot dipped galvannealed zinc

coated, in coils, in ANY of the following sizes:

(a) thickness 0.75 mm and width 1 535 mm;

(b) thickness 0.80 mm and width 1 640 mm;

(c) thickness 0.90 mm and width 1 530 mm

For the purposes of this order, tolerances allowable for

specification (a) - (c) are:

(a) thickness +/- 10%

(b) width +/- 1%

Op. 04.06.13 - TC 1318527

Stated Use:

Production of replacement parts motor vehicles

Applicant: WRIGHT STEEL (SALES) PTY LTD

Importer: CITIC AUSTRALIA COMMODITY TRADING PTY LTD

50

5%

7214.20.00 REINFORCING BARS, CRYOGENIC, LIQUID NATURAL GAS STORAGE TANK,

having ALL of the following:

(a) un-notched bar uniform elongation at maximum force

("Agt") NOT less than 3% at cryogenic temperature

minus 168 degrees Celsius;

(b) un-notched bar yield strength NOT less 575 MPa;

(c) transverse rib surface geometry

Op. 05.06.13 - TC 1318643

Stated Use:

Cryogenic reinforcing bars are required in the construction of

liquid natural gas tanks for the very low temperature

requirements

Applicant: LAING O'ROURKE AUSTRALIA CONSTRUCTION PTY LTD

50

5%

7228.30.90 REINFORCING BARS, CRYOGENIC, LIQUID NATURAL GAS STORAGE TANK,


(a) un-notched bar uniform elongation at maximum force

("Agt") NOT less than 3% at cryogenic temperature minus

168 degrees Celsius;

(b) un-notched bar yield strength NOT less 575 MPa;

(c) transverse rib surface geometry

Op. 05.06.13 - TC 1318642

Stated Use:

Cryogenic reinforcing bars are used in the construction of

liquid natural gas tanks for the very low temperature

requirements

Applicant: LAING O'ROURKE AUSTRALIA CONSTRUCTION PTY LTD

50

5%





7301.10.00 SHEET PILES, hot rolled, combined wall system, conforming to

European Standard 10248 Part 1 (EN 10248 Part 1) having ALL of

the following:

(a) tensile strength exceeding 340 N/mm2;

(b) steel grade S355 (355 MPa);

(c) wall thickness NOT less than 9 mm and NOT greater than

13.2 mm

Op. 27.05.13 - TC 1317196

Stated Use:

Various applications such as river control/flood defence, ports

and harbours, bridges, retaining walls, basements/car parks,

load bearing foundations and temporary works where maximum

strength and durability at lowest possible weight is required

Applicant: N.V. BESIX S.A. & THIESS PTY LTD

50

5%

7308.90.00 TEMPLATES, ANCHOR BOLT, TECHNICAL AMMONIUM NITRATE (TAN)

PLANT

Op. 30.05.13 - TC 1317818

Stated Use:

To provide precise location of fixing anchor bolts etc during

construction of towers

Applicant: YARA PILBARA NITRATES PTY LTD

50

5%

7318.15.00 KITS, PURLIN ASSEMBLY, mild steel OR high tensile steel, zinc

plated and galvanised, with OR without washers, being EITHER of

the following:

(a) hex bolts and nuts;

(b) hex flanged bolts and flanged nuts

Op. 28.05.13 - TC 1317230

Stated Use:

To connect and erect steel purlins

Applicant: HOBSON ENGINEERING CO PTY LTD

50

5%

8302.50.00 BRACKETS, TOILET PAN AND CISTERN WALL FIXTURE, zinc coated steel

Op. 28.05.13 - TC 1317286

Stated Use:

To securely hold toilet pans and cisterns

Applicant: CAROMA INDUSTRIES LTD

50

5%

8309.90.00 CLOSURES, tinplate, having ALL of the following:

(a) outside body diameter NOT greater than 51 mm;

(b) vacuum button;

(c) retortable to 121 degrees C for 60 minutes

Op. 31.05.13 - TC 1317848

Stated Use:

Caps are fitted as closures on infant food 110 g and 170 g

glass jars

Applicant: H.J. HEINZ COMPANY AUSTRALIA LTD

50

5%





8418.69.00 COMPRESSION REFRIGERATORS, with OR without cup warmer AND/OR

water tank, having a storage capacity NOT greater than 15 L

Op. 30.05.13 - TC 1317634

Stated Use:

For keeping milk refrigerated, storage and heating of coffee

cups, also used with commercial automatic coffee dispensing

machine

Applicant: CANTARELLA BROS PTY LTD

50

5%

8418.69.00 BLAST CHILLERS AND/OR FREEZERS, having a maximum capacity of NOT

less than 40 trays

Op. 03.06.13 - TC 1318396

Stated Use:

For blast chilling or freezing bakery products

Applicant: LA CUCINA DI PAPA

50

5%

8422.19.00 DISHWASHERS, flight type, programmable logic controlled, having

a capacity of NOT less than 4 000 plates per hour

Op. 06.06.13 - TC 1318809

Stated Use:

Washing of dishes, trays and the like in airline flight kitchens

Applicant: MOFFAT PTY LTD

50

5%

8427.10.00 STACKER TRUCKS, electric, pedestrian operated, having ALL of the

following:

(a) load capacity NOT less than 2 550 kg and NOT greater than

3 000 kg;

(b) AC motors;

(c) wheelbase NOT greater than 1 350 mm;

(d) tiller steering arm 90 degrees

Op. 03.06.13 - TC 1318397

Stated Use:

For lifting pallets in warehouses where pedestrian aisle space

is limited

Applicant: NICHIYU FORKLIFTS AUSTRALIA PTY LTD

50

5%

8479.89.90 HYDRAULIC HAMMER STATIONS, CARBON ANODE CLEANING, single hammer

OR twin hammer, programmable logic controlled, including ALL of

the following:

(a) steel mounting frames AND bases;

(b) hammer mount steel rails;

(c) greasers with reservoirs AND valves;

(d) hydraulic power modules with air-to-oil coolers

Op. 29.05.13 - TC 1317554

Stated Use:

For the removal of the crust formed on carbon anodes during the

aluminium smelting process

Applicant: BOYNE SMELTERS LTD

50

5%





8481.80.90 KITS, TOILET CISTERN, with OR without stopcock, including ALL of

the following:

(a) bracket;

(b) flexible hose;

(c) plug set, consisting of ALL of the following:

(i) stepped flange;

(ii) nut;

(iii) plastic stop plug,

(d) inlet valve bayonet

Op. 28.05.13 - TC 1317401

Stated Use:

For repairing or manufacturing toilet cisterns

Applicant: CAROMA INDUSTRIES LTD

50

5%

8705.90.00 SWEEPERS, VEHICLE, ROAD RAIL, having ALL of the following:

(a) length NOT greater than 6 900 mm with front boom;

(b) width NOT greater than 1 910 mm;

(c) height NOT greater than 2 800 mm;

(d) water tank capacity NOT less than 810 litres and NOT

greater than 1 810 litres;

(e) hopper capacity NOT greater than 4 m3;

(f) minimum curve radius 25 m;

(g) 2 sweeping levels

Op. 27.05.13 - TC 1317161

Stated Use:

Enables sweeping and vacuuming of platforms

Applicant: BOMBARDIER TRANSPORTATION AUSTRALIA PTY LTD

50

5%

9406.00.00 BUILDINGS, prefabricated, with OR without windows OR built-in

furniture, being containerised modules having ALL of the

following:

(a) steel walls having a thickness of NOT less than 2 mm;

(b) steel-plated under floor;

(c) non-opening windows, when supplied, having a thickness of

NOT less than 12 mm

Op. 06.06.13 - TC 1318913

Stated Use:

Office and working accommodation, blast resistant, for the

petrochemical, oil and gas industries

Applicant: ROYAL WOLF TRADING AUSTRALIA PTY LTD

50

5%

7 TCO Applications Reworded Commonwealth of Australia Gazette


TCO Applications R ewor ded

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION PARAGRAPH 269L(4B)(b) - PROPOSAL TO AMEND DESCRIPTION OF GOODS FOLLOWING AN

OBJECTION SUBMISSION

Amended description has been proposed for the Tariff Concession Order application shown in the following

TABLE.

Australian manufacturers who consider that there are reasons why the Tariff Concession Order as proposed to be

amended should not be made are invited to lodge a submission. Submissions must be lodged no later than 14

days after the publication of this Notice.

The operative date (Op.) and TC reference number follow the description of goods.

To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.

THE TABLE


Customs Tariff Classification

8474.90.00 PARTS, CONE AND/OR GYRATORY AND/OR JAW CRUSHER, being ANY of the

following:

(a) wear segments AND/OR plates;

(b) shields;

(c) ring dust seals;

(d) shells;

(e) hydraulic crusher axles;

(f) cylinders;

(g) frames;

(h) wedges;

(i) bowls;

(j) crusher heads;

(k) pitman assemblies, consisting of ALL of the following:

(i) shell;

(ii) wear plates;

(iii) shields;

(iv) shaft;

(v) ring dust seals

Op. 26.03.13 - TC 1310637

Stated Use:

For the manufacture and/or repair of ore crushers and/or grinders

Applicant: METSO MINERALS (AUSTRALIA) LTD

50

8 TCO Applications Refused Commonwealth of Australia Gazette


TCO Applications R efused

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269R(1) - APPLICATIONS FOR TARIFF CONCESSION ORDERS REFUSED

The application for the Tariff Concession Order for the goods described in the following TABLE has been

refused.

THE TABLE


Customs Tariff Classification

8428.90.00 SURGE BIN AND SAMPLE PLANT, COAL, having ALL of the following:

(a) length NOT less than 30 metres and NOT greater than

40 metres;

(b) width NOT less than 20 metres and NOT greater than

30 metres;

(c) height NOT less than 40 metres and NOT greater than

50 metres;

(d) weight NOT less than 2 000 tonnes and NOT greater

than 3 000 tonnes;

(e) surge bin weight NOT less than 300 tonnes and NOT greater

than 400 tonnes;

(f) surge bin capacity feed-in rate NOT greater than 11 000

tonnes per hour;

(g) surge bin capacity discharge rate NOT greater than 8 000

tonnes per hour;

(h) bearing grease lines;

(i) belt cleaner;

(j) detectors;

(k) bins AND hoppers;

(l) conveyor idlers;

(m) chutes;

(n) encoders;

(o) feeders;

(p) frames;

(q) gantries;

(r) hoists;

(s) hydraulic power packs;

(t) liners;

(u) magnets;

(v) motor control centres;

(w) pulleys;

(x) control and distribution panels;

(y) pipes;

(z) risers;

(aa) roll crushers;

(ab) samplers;

(ac) skirts;

(ad) switches;

(ae) transmitters;

(af) valves

Op. 04.02.13 - TC 1304210

Reason for refusal:

Substitutable goods produced in Australia in the ordinary course

of business by Pacific Coast Engineering, Bohle, Qld

50

9 TCOs Made Commonwealth of Australia Gazette


TCOs M ade

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE

Tariff Concession Orders have been made for the goods described in the following TABLE.

The operative date (Op.) and TC reference No. follow the description of goods.

Local manufacturers of substitutable goods may request the revocation of TCOs at any time.

THE TABLE


Customs Tariff Classification Last Date of Effect

3925.30.00 PARTS, VERTICAL BLIND, being slat travellers

Op. 11.04.13 Dec. date 01.07.13 - TC 1312402

50

3926.90.90 SCREEN PROTECTORS, PHONE AND/OR TABLET AND/OR MOBILE MUSIC AND

VIDEO PLAYER, thermoplastic polyurethane

Op. 18.02.13 Dec. date 01.07.13 - TC 1306220

50

3926.90.90 MIRRORS, BABY, having a fabric OR plastic frame, with OR without

ANY of the following:

(a) lever lock suction cups;

(b) visor clips;

(c) remote control;

(d) light AND/OR sound emitting

Op. 15.04.13 Dec. date 01.07.13 - TC 1312680

50

5407.81.00 FABRIC, wide width woven, bleached, having ALL of the following:

(a) NOT less than 35% and NOT greater than 50% polyester,

remainder cotton;

(b) thread count NOT less than 70 x 60 picks and NOT greater

than 200 x 100 picks;

(c) width NOT less than 290 cm and NOT greater than 310 cm;

(d) yarn gauge NOT less than 16/16 and NOT greater than 40/40

Op. 15.04.13 Dec. date 01.07.13 - TC 1312643

50

5407.82.00 FABRIC, wide width woven, dyed, having ALL of the following:

(a) NOT less than 35% and NOT greater than 50% polyester,

remainder cotton;

(b) thread count NOT less than 70 x 60 picks and NOT greater

than 200 x 100 picks;

(c) width NOT less than 290 cm and NOT greater than 310 cm;

(d) yarn gauge NOT less than 16/16 and NOT greater than 40/40

Op. 15.04.13 Dec. date 01.07.13 - TC 1312642

50

6307.90.99 BASKETS, BATH TOY, having EITHER OR BOTH of the following:

(a) suction cups;

(b) hooks

Op. 04.04.13 Dec. date 01.07.13 - TC 1311722

50

8205.59.00 TIERS, CONCRETE REINFORCING BAR

Op. 05.04.13 Dec. date 01.07.13 - TC 1311878

50

8207.50.00 TUBES, DRILL BIT, having a length NOT greater than 2 metres

Op. 22.03.13 Dec. date 25.06.13 - TC 1310247

50

8441.10.10 SLITTER REWINDERS, PAPER AND FILM, whether OR not assembled,


(a) roller width NOT less than 1 080 mm and NOT greater than

1 980 mm;

(b) unwind diameter NOT less than 450 mm and NOT greater than

1 430 mm;

(c) rewind diameter NOT less than 270 mm and NOT greater than

1 100 mm;

(d) slit width NOT less than 45 mm;

(Continued on next page)

50

10 TCOs Made Commonwealth of Australia Gazette




(Continued from previous page)

(e) shaftless unwind stand;

(f) auto edge guider;

(g) vacuum splicing table

Op. 05.04.13 Dec. date 01.07.13 - TC 1311879

8716.80.00 JACKS, VEHICLE POSITIONER, hydraulic

Op. 12.04.13 Dec. date 01.07.13 - TC 1312525

50

9405.40.00 LIGHTS, AQUARIUM, non-ceramic with OR without ceramic bulb

holder, with integrated controller AND timer, with OR without

stand

Op. 03.04.13 Dec. date 01.07.13 - TC 1311710

50

9405.40.00 KITS, LIGHT, light emitting diode, having a power output NOT

greater than 12 W, non-ceramic with OR without ceramic bulb

holder, having ALL of the following:

(a) light fittings;

(b) transformers;

(c) supply cables,

being ANY of the following:

(i) down lights;

(ii) spot lights;

(iii) circular lights having a diameter NOT greater than

7.6 cm;

(iv) square lights having a side measurement NOT greater

than 10 cm;

(v) rectangular lights having a width NOT greater than

9 cm and length NOT greater than 22 cm

Op. 10.04.13 Dec. date 01.07.13 - TC 1312376

50

11 Local Manufacturer Initiated - TCO Revocation Requests Commonwealth of Australia Gazette


Local M anufac tur er Initiated - TC O R evocation R equests

NOTIFICATION OF AN AUSTRALIAN INDUSTRY REVOCATION REQUEST - SECTION 269SC(1A) CUSTOMS ACT

An application has been lodged for revocation of the Tariff Concession Order set out in the following TABLE.

The Lodgement Request Date shown in the table below is the intended revocation date for the Tariff Concession

Order which will take effect should the application for revocation be successful.

Importations not covered by in-transit provisions may be subject to post action as any decision to revoke an

order is backdated to the date of request for revocation.

THE TABLE


Customs Tariff Classification Lodgement Request Date

7210.49.00 COILS, non-alloy steel, hot rolled, zinc coated, complying with

American Society for Testing and Materials Standard ASTM A 653/A

653M - 05a, having ALL of the following:

(a) coil thickness NOT less than 1.48 mm and NOT greater than

6.0 mm;

(b) coil width NOT less than 784 mm and NOT greater than

1 263 mm;

(c) minimum yield strength NOT less than 360 Mpa;

(d) minimum tensile strength NOT less than 460 Mpa;

(e) coil inside diameter NOT less than 711 mm and NOT greater

than 813 mm;

(f) zinc coating mass NOT less than 0.080 kg/m2 per side;

(g) each coil weighing NOT less than 14 metric tonnes;

(h) chemical composition by weight of ALL of the following:

(i) carbon content NOT greater than 0.20%;

(ii) manganese content NOT less than 0.50% and

NOT greater than 1.00%;

(iii) phosphorus content NOT greater than 0.03%;

(iv) sulphur content NOT greater than 0.03%;

(v) chromium content less than 0.30%;

(vi) molybdenum content less than 0.08%;

(vii) aluminium content NOT greater than 0.10%;

(viii) copper content NOT greater than 0.25%;

(ix) nickel content NOT greater than 0.25%;

(x) titanium content NOT greater than 0.04%;

(xi) vanadium content less than 0.1%;

(xii) silicon content NOT greater than 0.45%,

Op. 13.11.12 Dec. date 30.05.13 - TC 1317796

50

27.06.13

12 Local Manufacturer Initiated - TCOs Revoked Commonwealth of Australia Gazette


Local M anufac tur er Initiated - TC Os R evoked

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(1) - AUSTRALIAN INDUSTRY INITIATED - TARIFF CONCESSION

ORDERS REVOKED

The Tariff Concession Orders for the goods described in the following TABLE have been revoked.

THE TABLE



4016.91.00 MATS, CAR, nitrile butadiene rubber, injection moulded

Op. 19.10.06 Dec. date 29.12.06 - TC 0617788

Substitutable goods produced in Australia in the ordinary

course of business by TST Carpet Manufacturers Pty Ltd, Hoppers

Crossing, Victoria. In transit provisions apply.

50

02.05.13

4016.91.00 MATS, CAR BOOT

Op. 14.11.06 Dec. date 09.02.07 - TC 0618515




50

02.05.13

4016.91.00 MATS, CAR, rubber

Op. 17.11.06 Dec. date 09.02.07 - TC 0618622




50

02.05.13

4016.91.00 MATS, AUTOMOTIVE, rubber

Op. 17.11.06 Dec. date 09.02.07 - TC 0618628




50

02.05.13

5703.20.00 CARPETS, VEHICLE, TUFTED NYLON, having ALL of the following:

(a) primary backcoating of polyethylene;

(b) secondary backcoating of acrylic/latex;

(c) primary and secondary foundation of spunbonded polyester

Op. 23.08.06 Dec. date 10.11.06 - TC 0613955




50

29.04.13

5703.20.00 MATS, CAR, cut loop pile AND/OR hi-low loop pile, spiked back,

comprising BOTH of the following:

(a) tufted graphics design face fabric of nylon yarn;

(b) styrene-butadiene-rubber latex and/or styrene-butadiene-

styrene copolymer backing coat

Op. 26.11.07 Dec. date 29.02.08 - TC 0720078




50

29.04.13

5703.20.00 SETS, CAR MAT, cut loop pile AND/OR hi-low loop pile, tufted

graphics design face fabric of nylon, styrene-butadiene-rubber

latex and styrene-butadiene-styrene copolymer backing coat,

spiked backing, consisting of one or more of the following:

(a) two front floor car mats;

(b) two rear floor car mats

Op. 26.11.07 Dec. date 29.02.08 - TC 0720222




50

29.04.13

13 Local Manufacturer Initiated - TCOs Revoked Commonwealth of Australia Gazette




5703.20.00 MATS, nylon, unprinted, having nitrile rubber backing

Op. 01.11.10 Dec. date 11.03.11 - TC 1048555




50

30.04.13

5704.90.10 CARPETING, mouldable AND/OR non-mouldable, having ALL of the

following:

(a) multi-layered;

(b) high AND low melt polypropylene and polyethylene mix,

needle punched;

(c) acrylic liquid compound (dry glue) binding

Op. 13.05.10 Dec. date 09.08.10 - TC 1021566




50

29.04.13

14 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette


TCOs R evoked - U nused for over 2 years

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269SE(2) - TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF CUSTOMS

The Tariff Concession Orders listed in THE TABLE below have not been used for at least 2 years and have been

revoked under Section 269SD(1A). In transit provisions apply.

The intention to revoke these orders was notified in Gazette TC13/21 dated 29 May 2013.

Contact: Phone 02 6122 5540, fax 02 6275 6376 or email [email protected].

THE TABLE



7304.51.00 BARS, HOLLOW, cold drawn, alloy steel, to specification BS6258

OR ISO2938

Op. 19.11.99 Dec. date 31.01.00 - TC 9908853

Revoked: 2 years non-use. In transit provisions apply.

50

30.06.13

8307.10.00 EXPANSION JOINTS, single, bellows mechanism, having ALL of

the following:

(a) bore diameter NOT less than 400 mm;

(b) standard working pressure NOT less than 600 kPa;

(c) seamless polytetrafluoroethylene (PTFE) liner

Op. 03.09.02 Dec. date 03.12.02 - TC 0208093


50

30.06.13

8428.50.00 UNLOADERS, TRAIN, comprising ALL of the following:

(a) tipplers;

(b) indexers;

(c) train holders;

(d) controllers

Op. 09.11.06 Dec. date 09.02.07 - TC 0701950


50

30.06.13

8428.90.00 MATERIALS, CONVEYING, UNLOADING AND STACKING SYSTEM, comprising

ALL of the following:

(a) fixed bollards containing either a powered traction wheel

OR a slave wheel;

(b) chain driven transfer stations;

(c) table stackers;

(d) elevators;

(e) cranes

Op. 02.02.04 Dec. date 30.04.04 - TC 0400899


50

30.06.13

mailto:[email protected]

15 TCOs Revoked and Re-Issued - Classification Change Commonwealth of Australia Gazette


TCOs R evoked and Re-Issued - Classification C hange

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(2)

TARIFF CONCESSION ORDER REVOKED AND NEW TARIFF CONCESSION ORDERS MADE IN ACCORDANCE WITH 269SD(2) OF THE

CUSTOMS ACT.

Tariff Concession Orders for the goods described in the following TABLE have been revoked and new Tariff

Concession Orders made in respect of the goods described below.

The operative date (Op.), decision date (Dec. date) and TC reference number follow the description of goods.

THE TABLE



TCO REVOKED

8536.30.00 FUSE SWITCH DISCONNECTORS, three phase switching, having BOTH

of the following:

(a) operational voltage NOT greater than 690 V;

(b) rated operational current NOT less than 160 A and NOT

greater than 1 250 A

Op. 27.10.11 Dec. date 23.01.12 - TC 1136054

TCO 1136054 revoked and re-issued as 1319682 due to a tariff

classification change to 8536.50.99.

50

30.05.13

TCO REISSUED

8536.50.99 FUSE SWITCH DISCONNECTORS, three phase switching, having BOTH

of the following:

(a) operational voltage NOT greater than 690 V;

(b) rated operational current NOT less than 160 A and NOT

greater than 1 250 A

Op. 31.05.13 Dec. date 01.07.13 - TC 1319682

50

TCO REVOKED

8536.30.00 FUSE SWITCH DISCONNECTORS, operational voltage 660 V AC, having


(a) capable of single phase operation;

(b) AC23 rating for load switching;

(c) dependant manual operation;

(d) IP20 isolation;

(e) suitable for 210 mm phase centres;

(f) an integral current transformer option with the capability

Of remaining in the open circuit position under load

conditions

Op. 19.05.93 Dec. date 30.08.93 - TC 9304919



50

30.05.13

TCO REISSUED

8536.50.99 FUSE SWITCH DISCONNECTORS, operational voltage 660 V AC, having


(a) capable of single phase operation;



(d) IP20 isolation;

(e) suitable for 210 mm phase centres;

(f) an integral current transformer option with the

capability of remaining in the open circuit position

under load conditions

Op. 31.05.13 Dec. date 01.07.13 - TC 1319679

50

16 TCOs Revoked and Re-Issued - Classification Change Commonwealth of Australia Gazette




TCO REVOKED

8536.30.00 DISCONNECTORS, FUSE SWITCH, operational voltage 660 V AC, having


(a) capable of single or three phase switching;


(c) IP20 isolation;

(d) suitable for 100 mm or 185 mm phase centres;

(e) an integral current transformer option with the capability

of remaining in the open circuit position under load

conditions

Op. 15.02.94 Dec. date 27.05.94 - TC 9402279



50

30.05.13

TCO REISSUED

8536.50.99 DISCONNECTORS, FUSE SWITCH, operational voltage 660 V AC, having




(c) IP20 isolation;

(d) suitable for 100 mm or 185 mm phase centres;

(e) an integral current transformer option with the capability

of remaining in the open circuit position under load

conditions

Op. 31.05.13 Dec. date 01.07.13 - TC 1319680

50

TCO REVOKED

8536.30.00 FUSE SWITCH DISCONNECTORS, having an operational voltage NOT

exceeding 690 V AC, having ALL of the following:


(b) AC 23 rating for load switching;


(d) IP20 isolation

Op. 14.03.94 Dec. date 17.06.94 - TC 9403651



50

30.05.13

TCO REISSUED

8536.50.99 FUSE SWITCH DISCONNECTORS, having an operational voltage NOT

exceeding 690 V AC, having ALL of the following:


(b) AC 23 rating for load switching;


(d) IP20 isolation

Op. 31.05.13 Dec. date 01.07.13 - TC 1319681

50

17 Section 273 Determinations Made Commonwealth of Australia Gazette


Section 273 D eter minati ons Made

NOTICE OF DETERMINATIONS MADE UNDER PART XVI OF THE CUSTOMS ACT 1901

Under subsection 273B(2) of the Customs Act 1901, notice is hereby given of the making of determinations

applying to goods of a kind specified in the table below.

In the table:

(i) the first column specifies the kind of goods to which the determination applies, any conditions specified

in the determination, the commencement and cessation dates of the determination and the Determination

reference number;

(ii) the second column specifies the item in Schedule 4 to the Customs Tariff Act 1995 that applies to the

specified goods.

Goods ancillary to an EPBS project, including office equipment, buildings, office/personnel accommodation and

goods used in activities such as land preparation, road construction and maintenance, transportation (other

than pipes, pipelines, conveyors, power transmission lines, flexible flow lines, etc integral to the project

and used to convey gas liquids, minerals, electricity or other materials or goods) and the provision of

telecommunications and other general services are excluded. Materials, consumables and construction and

servicing equipment, including all fuels, oils lubricants, adhesives, filters, protective garments, tools,

ladders (other than articles auxiliary to and designed to be permanently attached to eligible goods under

EPBS, such as pylons, supporting structures, staircases, ladders, railings, etc) paint, varnish and the like

are ineligible under EPBS, as are spare parts used for on-going maintenance beyond the commissioning of the

project.

EPBS Determinations also apply to all goods listed in the Determination when they are imported in multiple

shipments, which may be from different locations at different times.

Where a number of EPBS Determinations are issued for a particular eligible good, all associated Determinations

must not exceed the quantity of goods approved by the Delegate in the EPBS Project Eligible Goods List.

THE TABLE

Importer

Project Proponent

Project Name

Description of Goods

Dates of Effect

Exclusions

Schedule 4

Item Number

Goods, imported by AUSTRALIA PACIFIC LNG PROCESSING PTY LTD (ABN 43141937948), for use in the

Australia Pacific LNG Pty Ltd (ABN

68001646331), Australia Pacific LNG (Downstream), as follows:

(a) two (2) only Flare/Vent System, consisting of ALL of the

following components:

(i) flares (wet, dry, marine);

(ii) flare pilots;

(iii) pumps;

(iv) valves;

(v) columns and vessels;

(vi) thermal oxidiser;

(vii) vapourisers;

(viii) instrumentation;

(ix) structural steel, piping and fittings;

(x) piping Racks; and

(xi) hoses, Couplings.

(b) components of the goods specified in (a) above, including

commissioning spare parts integral to the project.

(c) but specifically excluding:

(i) items peripheral to the process of function performed

by the flare/vent system, including fittings, conveyors

or pipelines connecting functional units to each other

or to other parts of the project; and

(ii) auxiliary articles including structural steel and

piping racks external to the flare/vent modules.

1.02.13 to 28.02.2013 inclusive AD 01003708

71



Importer

Project Proponent

Project Name


Dates of Effect

Exclusions

Schedule 4

Item Number

Goods, imported by AUSTRALIA PACIFIC LNG PROCESSING PTY LTD (ABN 43141937948),

for use in the Australia Pacific LNG Pty Ltd (ABN


(a) two (2) only Flare/Vent System, consisting of ALL of the

following:

(i) flares (wet, dry, marine);

(ii) flare pilots;

(iii) pumps;

(iv) valves;

(v) columns and vessels;

(vi) thermal oxidiser;

(vii) vapourisers;


(ix) structural steel, piping and fittings;

(x) piping Racks; and

(xi) hoses, Couplings.





by the flare/vent system, including fittings, conveyors



(ii) auxiliary articles including structural steel and

piping racks external to the flare/vent modules.

1.03.13 to 31.01.2015 inclusive AD 01003709




(a) two (2) only Fuel Gas Systems, consisting of ALL of the

following:

(i) heat exchangers (heaters/coolers);

(ii) filters and gas separators;

(iii) fuel gas compressor;

(iv) columns and vessels;

(v) valves;

(vi) metering skid;

(vii) analyser systems;

(viii) instrumentation

(ix) structural steel and piping;

(x) piping racks;

(xi) spill pads; and

(xii) hoses, couplings.





by the fuel gas system, including fittings, conveyors



(ii) auxiliary articles such as support structures, structural

steel and piping racks external to the fuel gas modules.

1.02.13 to 28.02.13 AD 01003710




(a) two (2) only Fuel Gas Systems, consisting of ALL of the

following:

(i) heat exchangers (heaters/coolers);

(ii) filters and gas separators;

(iii) fuel gas compressor;

71

71

71



Importer

Project Proponent

Project Name


Dates of Effect

Exclusions

Schedule 4

Item Number

(iv) columns and vessels;

(v) valves;

(vi) metering skid;

(vii) analyser systems;


(ix) structural steel and piping;

(x) piping racks;

(xi) spill pads; and

(xii) hoses, couplings.





by the fuel gas system, including fittings, conveyors



(ii) auxiliary articles such as support structures, structural

steel and piping racks external to the fuel gas modules.

1.03.13 to 31.01.15 AD 01003711



68001646331), Australia Pacific LNG Project (Upstream), as follows:

(a) seven (7) only Gas processing facilities consisting of ALL

of the following:

(i) air coolers;

(ii) centrifugal compression train;

(iii) high pressure compressor and after-cooler;

(iv) low pressure compressor and after-cooler;

(v) filter coalescers;

(vi) gas metering units;

(vii) flare system;

(viii) pipes, valves and fittings;

(ix) instrumentation;

(x) pumps and motors;

(xi) sales meter;

(xii) scrubbers;

(xiii) switchrooms;

(xiv) transformers;

(xv) inlet separators; and

(xvi) oil flooded compressors.





by the gas processing facility, including fittings, conveyors


or to other parts of the project.

20.12.12 to 28.02.13 AD 01003600


for use in the Australia Pacific LNG Pty Ltd (ABN 68001646331),

Australia Pacific LNG Project (Upstream), as follows:

(a) two (2) only Water Treatment Facilities consisting of ALL of

the following:

(i) air compressors;

(ii) analyser units;

(iii) boilers;

(iv) boiler feedwater systems;

(v) chemical dosing & transfer package;

(vi) control systems;

(vii) cooling towers;

(viii) disk filtration package;

(ix) electrical systems;

(x) fuel gas conditioning systems;

71

71



Importer

Project Proponent

Project Name


Dates of Effect

Exclusions

Schedule 4

Item Number

(xi) ion exchange/silca removal package;

(xii) ion exchange/ silica removal pressure vessels;

(xiii) ion exchange resin/ silica removal activated alumina;

(xiv) HDPE pond liners;

(xv) membrane filtration package;

(xvi) multi effect distillation package;

(xvii) pipes, valves and fittings;

(xviii) process instrumentation & actuation;

(xix) pumps and motors;

(xx) reverse osmosis membrane package;

(xxi) steam transformers;

(xxii) structural steel; and

(xxiii) tanks.




(i) items peripheral to the function performed

by the water treatment facility, including fittings,

pipes, or pipelines connecting functional units to each other


(ii) structural steel external to the water treatment facility.

20.03.2013 to 19.03.2015 inclusive AD 01003705



68001646331), Australia Pacific LNG Project (Upstream), as follows:

(a) seven (7) only Gas processing facilities consisting of ALL

of the following:

(i) air coolers;

(ii) centrifugal compression train;

(iii) high pressure compressor and after-cooler;

(iv) low pressure compressor and after-cooler;

(v) filter coalescers;

(vi) gas metering units;

(vii) flare system;

(viii) pipes, valves and fittings;

(ix) instrumentation;

(x) pumps and motors;

(xi) sales meter;

(xii) scrubbers;

(xiii) switchrooms;

(xiv) transformers;

(xv) inlet separators; and

(xvi) oil flooded compressors.





by the gas processing facility, including fittings, conveyors


or to other parts of the project.

1.03.2013 to 19.12.2014 inclusive AD 01003714

71

21 By-Laws Made Commonwealth of Australia Gazette


By-Laws M ade

Customs Act 1901

PART I of Schedule 4 to the Customs Tariff Act 1995

By-law No. 0176871

I, Geoff Johannes, under section 271 of the Customs Act 1901, make the by-law set out

in the Schedule below for the purposes of item 17 in PART I of Schedule 4 to the

Customs Tariff.

In the by-law set out in the Schedule below, "security" means security required from

the importer to the satisfaction of the Collector under section 42 of the Customs Act

1901.

THE SCHEDULE

1. This by-law may be cited as Customs By-law No. 0176871.

2. This by-law shall take effect on and from 1 July 2013.

3. For the purposes of item 17 of Schedule 4 to the

Customs Tariff Act 1995, goods that:

(a) are produced in Australia; or

(b) duties of the Commonwealth were paid when first

imported into Australia;

that have been exported from Australia and returned in an

unaltered condition, being goods that have not been subject to

treatment, repair, renovation, alteration or any other process,

are prescribed.

4. For the purposes of paragraph 3, repair does not

include repairs undertaken for the preservation or maintenance

of the goods.

5. The application of item 17 to the goods in paragraph 3

does not include goods in respect of which:

(a) that, at a time before they were exported, were

excisable goods (within the meaning of the Excise Act 1901) in

respect of which excise duty (payable under the Excise Tariff

Act 1921) has not been paid;

(b) any duties of the Commonwealth were payable at or

prior to the date of exportation but which have not been paid;

(c) a drawback or refund of any duties of the Commonwealth

was paid and an amount equal to such drawback or refund has not

been paid to the Commonwealth.

6. For the purposes of this by-law, the Customs Tariff

Act 1995 means the Customs Tariff Act 1995, as amended or

proposed to be altered.

Dated this eighteenth day of June 2013.

(signed)

Geoff Johannes

Delegate of the Chief Executive Officer

22 Cheese Quota Allocation Commonwealth of Australia Gazette


Cheese Quota Allocati on

AUSTRALIAN CUSTOMS AND BORDER PROTECTION SERVICE

TARIFF QUOTAS – CHEESE & CURD QUOTA ALLOCATIONS - TARIFF QUOTA HOLDERS 01 Jul 2013 to 30 Jun 2014

GENERAL INFORMATION

This Gazette contains a table in Part 1 specifying details of quota categories relevant to quota entitlements

outlined in Part 2.

Enquiries concerning any information published within this Gazette should be directed to Trade Branch,

Australian Customs and Border Protection Service, Customs House, 5 Constitution Avenue, Canberra City, ACT,

2601.

PART 1

NOTICE OF MAKING A DETERMINATION UNDER PART XVI OF THE CUSTOMS ACT 1901

In pursuance of Section 273B of the Customs Act 1901, notice is hereby given that Determination Number

01000618 was made in relation to Item 55 in Part III of Schedule 4 to the Customs Tariff Act 1995, and subject

to any conditions set out hereunder, that Determination applies to goods that are:

(1) specified in the Table hereunder;

(2) classified under a subheading of Schedule 3 to the Customs Tariff Act 1995, specified in Item 55 in

Part III of Schedule 4 to the Customs Tariff Act 1995;

(3) entered for home consumption not earlier than 01 Jul 2013 and not later than 30 Jun 2014 by the person

specified in that Determination, as shown in Part 2; and

(4) in total, not in excess of such quantity or such value as is specified in that Determination, as shown

in Part 2.

Condition

The application of item 55 in Part III of Schedule 4 to the Customs Tariff Act 1995 is subject to the

condition that the Treatment Code that identifies item 55 is included in the entry for home consumption at the

time at which the goods to which item 55 applies (as set out in this determination) are entered for home

consumption.

THE TABLE - BASE QUOTA ALLOCATIONS - CATEGORY INFORMATION

QUOTA

CATEGORY

QUOTA

CEILING

QUANTITY

(KG)

ALLOCATED

FINAL

FACTOR

%

NUMBER

OF QUOTA

HOLDERS

UNIT

QUANTITY

QUOTA

ITEM

NUMBER

QUOTA

DESCRIPTION

311 11,500,000 11,500,000 0.500973

2463

43 Kilograms 61A Cheese & Curd

PART 2

CAT

CODE

QUOTA HOLDERS LEGAL NAME QUOTA HOLDERS ADDRESS QUANTITY KG

311 A NASRALLA & E NASRALLA & F NASRALLA GREENVALE VIC 3059 900

311 ARQUILLA BULK TRADING CO PTY LTD CAMPERDOWN NSW 1450 17,717

311 BON FOOD PTY LTD NORTHLAND VIC 3072 95,566

311 CALENDAR CHEESE CO. PTY. LTD. PORT MELBOURNE VIC 3207 318,163

311 CAMPANIA OLIVE OIL CO. PTY. LTD. THOMASTOWN VIC 3074 25,823

23 Cheese Quota Allocation Commonwealth of Australia Gazette


CAT

CODE

QUOTA HOLDERS LEGAL NAME QUOTA HOLDERS ADDRESS QUANTITY KG

311 CANTARELLA BROS PTY LTD SILVERWATER NSW 1811 1,827,861

311 DCG ENTERPRISES PTY LTD KEMPS CREEK NSW 2178 6,280

311 DEL RE NOMINEES PTY. LTD. DONCASTER EAST VIC 3109 1,062,977

311 DELTA SALES PTY. LIMITED BRUNSWICK VIC 3056 653,886

311 EUROPEAN FOODS WHOLESALERS PTY LTD NORTHBRIDGE WA 6865 134,879

311 F. MAYER (IMPORTS) PTY LTD MASCOT NSW 1460 1,368,369

311 FESTIVAL CITY WINES & SPIRITS PTY. LTD. ALBERT PARK SA 5014 9,426

311 FULBECK PTY. LIMITED GUILDFORD NSW 2161 47,220

311 GAGANIS BROS. IMPORTED FOOD WHOLESALERS PTY. LTD. HINDMARSH SA 5007 162,981

311 GENOBILE BROTHERS FOOD DISTRIBUTORS PTY. LTD. COBURG NORTH VIC 3058 85

311 GLOBAL FOODS (N.S.W.) PTY. LIMITED VILLAWOOD NSW 2163 4,779

311 GLOBAL FOODS GROUP PTY. LTD. VILLAWOOD NSW 2163 677,805

311 HEIJO OSCAR & DELIA WARRAWONG NSW 2502 2,435

311 JOHN KOTIS FAMILY SETTLEMENT TRADING AS ELCO FOOD CLAYTON VIC 3168 759,384

311 KAYA FAMILY TRUST & THE TRACAS FAMILY TRUST BRUNSWICK VIC 3056 16,018

311 KEBIA IMPORTEX PTY LIMITED MARRICKVILLE NSW 2204 695,984

311 KIRK FOOD ASSOCIATES PTY LTD MASCOT NSW 1460 14,111

311 KORERO PTY LTD RIVERWOOD NSW 2210 62,671

311 L. DI SANTO PTY. LTD. CARLTON NORTH VIC 3054 437

311 LEMNOS FOODS PTY LTD DANDENONG VIC 3175 12,233

311 LEO'S IMPORTS AND DISTRIBUTORS PTY. LTD. CAMPBELLFIELD VIC 3061 49,035

311 MANASSEN FOODS AUSTRALIA PTY LIMITED WETHERILL PARK NSW 2164 1,732,570

311 MARCO POLO FOODS PTY LTD CAMPSIE NSW 2194 16,032

311 MENORA GOURMET PRODUCTS UNIT TRUST SPRINGVALE VIC 3171 36,942

311 MR SHAWKY EL HGAR PADSTOW NSW 2211 2,559

311 MR WILLIAM ADAM STUDD PORT MELBOURNE VIC 3207 6,936

311 OMEGA FOODS UNIT TRUST HINDMARSH SA 5007 11,895

311 P. & T. BASILE PTY. LIMITED BAYSWATER VIC 3153 347,471

311 QUALITY CENTRE FOOD SERVICES PTY LIMITED AUBURN NSW 2144 70,579

311 RODINI NOMINEES PTY. LTD. CAMPBELLFIELD VIC 3061 50,217

311 THE TRUSTEE FOR CORECO AUST UNIT TRUST SOMERTON VIC 3062 19,056

311 THE TRUSTEE FOR DIPTRON UNIT TRUST BLACKTOWN NSW 2148 2,519

311 THE TRUSTEE FOR THE CAZZOLATO FAMILY TRUST FORTITUDE VALLEY QLD 4006 589

311 THE TRUSTEE FOR THE CONGA TRUST NORTHLAND CENTRE VIC 3072 1,105,343

311 THE TRUSTEE FOR THE JOSS FOOD TRUST NOBLE PARK VIC 3174 67

311 VISCO SELECTED FINE FOODS PTY LTD PADDINGTON QLD 4064 4,034

311 WASHED RIND PTY LTD ADELAIDE SA 5000 318

311 ZINTIX PTY LTD LIDCOMBE NSW 2141 65,848

24 Cheese Quota Transfers Commonwealth of Australia Gazette


Cheese Quota Tr ans fers

AUSTRALIAN CUSTOMS AND BORDER PROTECTION SERVICE

TARIFF QUOTAS - QUOTA TRANSACTIONS PROCESSED IN THE PERIOD 25 Jun 2013 to 02 Jul 2013.

GENERAL INFORMATION

This Gazette contains details of quota transactions processed in the period 25 Jun 2013 to 02 Jul 2013

inclusive.

Part 1 contains a Table specifying quota category details.

Part 2, Section A, lists quota holders who received quota allocations via transfer transactions.

Part 2, Section B, lists all adjustments to previous allocations which have been caused by transfer

transactions.

NB.- In Section B, transactions represent changes to individual tariff quotas and do not necessarily represent

the entire holdings in that category for the quota holder.

- The "AS WAS" and "AS IS" columns indicate the quota levels for that particular tariff quota only at

the time of that transaction.

- The amount of the transaction can be deduced by subtracting the "AS WAS" column from the "AS IS"

column.

Inquiries concerning any information published within this Gazette should be directed to the Trade Branch,

Australian Customs and Border Protection Service, Customs House, 5 Constitution Avenue, Canberra City, ACT,

2601.

PART 1

NOTICE OF MAKING A DETERMINATION UNDER PART XVI OF THE CUSTOMS ACT 1901

In pursuance of Section 273B of the Customs Act 1901, notice is hereby given that a Determination specified in

Section A of Part 2 was made in relation to Item 62 in Part III of Schedule 4 to the Customs Tariff Act1995

and subject to any conditions set out hereunder, that Determination applies to goods that are:

(1) specified in the Table hereunder;

(2) classified under a subheading of Schedule 3 to the Customs Tariff Act 1995, specified in Item 62 in Part

III of Schedule 4 to the Customs Tariff Act 1995;

(3) entered for home consumption not earlier than the start date, and not later than the finish date, by the

person specified in that Determination, as shown in Part 2; and

(4) in total, not in excess of such quantity as is specified in that Determination, as shown in Part 2.

In pursuance of Section 273B of the Customs Act 1901, notice is hereby given that a Determination specified in

Section B of Part 2 amended a previous Determination by deleting the figures in the column headed QUANTITY AS

WAS" and inserting the figures in the column headed "QUANTITY AS IS".

THE TABLE

CATEGORY

CODE

UNIT

QUANTITY

QUOTA

ITEM

NUMBER

QUOTA

DESCRIPTION

311 Kilograms 61A Cheese & Curd

25 Cheese Quota Transfers Commonwealth of Australia Gazette


PART 2

SECTION A – QUOTA ALLOCATIONS

CAT

CODE

QUOTA HOLDERS LEGAL NAME POST

CODE

QUANTITY (KG) DETERMINATION

NUMBER

PART 2

SECTION B – AMENDED ALLOCATIONS

CAT

CODE

QUOTA HOLDERS LEGAL NAME POST

CODE

QUANTITY (KG)

AS WAS

QUANTITY (KG)

AS IS

DETERMINATION

NUMBER

311 MENORA GOURMET PRODUCTS UNIT TRUST 3171 25,760.00 16,950.00 000619

311 A.Q.M.S. PTY. LTD. 3078 0.00 8,810.00 000619

311 A.Q.M.S. PTY. LTD. 3078 8,810.00 0.00 000620

311 F. MAYER (IMPORTS) PTY LTD 1460 1,357,465.00 1,366,275.00 000620

TC 13-26 3 July 2013

Documents

Transcript of TC 13-26 3 July 2013