Tata Steel Cold Formed Sections Product RAnge
-
Upload
sudhansu777 -
Category
Documents
-
view
130 -
download
8
description
Transcript of Tata Steel Cold Formed Sections Product RAnge
Cold Formed Sections
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:05 Page 1
Contents
Contents page
Introduction 3
Manufacturing Capabilities 4
Lipped Channels 6
Plain Channels 11
Angle Sections 19
Slotted Channels 23
Service Duct Sections 25
Structural, Fence and Miscellaneous Sections 27
Cold Formed Sections Introduction
2
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:05 Page 2
We offer a vast range of high quality, precision engineered, cold-formedsections backed by unrivalled experience in design and manufacture withfirst class technical support. Our highly trained and experienced engineerscan provide full design guidance and technical support to ensure we fullymeet your requirements.
INTRODUCTION
We can provide the following: • Design and technical support• Standard and bespoke products• In-line piercing • In-house tooling manufacture• Flexible, responsive delivery service• Cost effective solutions• Customised packaging for bespoke sections• Full traceability through the supply chain• First class service and support from a global
manufacturer
The cold rolling process offers many unique features:• Extremely accurate, consistent shapes• Metal formed into a wide variety of profiles
and lengths• High strength to weight ratio• Properties of metal often improved• Improved stress distribution• Highly cost effective
3
Tata Steel Europe is Europe's second largest steelproducer with main steelmaking operations in theUK and the Netherlands.
The company supplies steel and related services tothe construction, automotive, packaging, materialhandling and other demanding markets worldwide.
It is a subsidiary of Tata Steel, one of the world’s top ten steel producers. The combined Group has an aggregate crude steel capacity of more than 28 million tonnes and approximately 80,000 employees across four continents.
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:05 Page 3
4
MANUFACTURINGCAPABILITIES
Technical information Bespoke products can be supplied within the following limits:
• 1325mm coil width and up to 1.5mm thick• 650mm coil width and up to 7.5mm thick• Tolerance on profile dimensions are generally +/-0.4mm; custom
tolerances can be agreed for certain requirements• There are virtually no length restrictions• Tata Steel cold formed sections are quality assured to ISO 9002• Sections can be 100% recycled
Tolerance Specification• All dimensions in mm.• Tolerance (unless otherwise stated):
Profile ±2 Angular ±2° Straightness Length/600 Twist 1° per metre length Internal radii - typically 1.5t ±0.5 Where t = material gauge thickness (mm)
• All angles 90°• The profile dimensions and angular accuracy shall be measured at a
point not less than 150mm from the end of the section.• As a general rule, gross (unreduced) section properties are shown for
the major (X) axis only as shown in the illustration below. Othersection properties are available on request.
X
X
With over 150 in-house roll sets, we can produce a wide range of standard profiles.
Cold Formed Sections Manufacturing Capabilities
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:05 Page 4
5
Standard Product rangeCold rolled, or cold-formed sections have a wide range of applications,including use in construction, transport and manufacturing industries:
• Construction sections• Modular housing• Flat duct for use in post tensioning• Conductor rail• Slotted channel• Heating and ventilating products• Manhole cover framing• Solar panel frame work• Cycle rack section
Manufacturing CapabilityMost C type or Z type sections can be manufactured in a range ofcoated or uncoated steel grades to suit your application. If batchgalvanising is required, we can undertake this on your behalf inaccordance with BS EN 1461. Take a look at the line drawings and theManufacturing Capabilities table below for an indication of the sectionsthat can be manufactured.
Our roll forming machines can produce the following sections:
TolerancesHoles cut within 0.5mmCut to length up to 0.5mmDimensions 1/1000
90º
(75mm to 250mm)
(50mm to
55mm)
(11.5mm)
(78mm to 253mm)
(50mm)
(80º to 150º)
Gauge(0.5mm to 2mm)
R (2.5mm)
(20mm to
75mm)
(20mm to 75mm)
(80º to 150º)
R (2.5mm)
Gauge(0.5mm to 2mm)
Gauge(0.5mm to 2mm)
R (2.5mm)
Lipped Channels Minimum/maximum dimensions
Plain Channels Minimum/maximum dimensions
Angle Sections Minimum/maximum dimensions
Manufacturing Capabilities
Machine Gauge Range Max Width Line SpeedsLine (mm) (mm) Average MaxRF15 2 to 6 400 10m/min 30m/minRF16 0.8 to 2.5 450 18m/min 30m/minRF6 0.4 to 1.2 250 25m/min 40m/min20std 1.6 to 8 680 15m/min 28m/minDecker 0.6 to 1.8 1450 40m/min 60m/min
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:05 Page 5
Lipped Channels
6
Cold Formed Sections Lipped Channels
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:05 Page 6
7
Section No. A3642
Gauge Range (mm) 1.6
Steel Grade S350GD+Z
Finish Galvanised 275g/m2
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø50
Holing Options (Side) Ø5 – Ø27.5
Section Modulus (Cm3) Zxx 11.8
Moment of Inertia (Cm4) Ixx 59.03
Weight (kg/m) 2.79
Section No. A3688
Gauge Range (mm) 1.8
Steel Grade S350GD+Z
Finish Galvanised 275g/m2
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø37.5
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 8.14
Moment of Inertia (Cm4) Ixx 30.54
Weight (kg/m) 2.5
Section No. A3694
Gauge Range (mm) 2.5
Steel Grade S450GD+Z
Finish Galvanised 600g/m2
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø50
Holing Options (Side) Ø5 – Ø27.5
Section Modulus (Cm3) Zxx 17.45
Moment of Inertia (Cm4) Ixx 87.25
Weight (kg/m) 4.22
Section No. A3682
Gauge Range (mm) 1.8
Steel Grade S350GD+Z
Finish Galvanised 275g/m2
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø55
Holing Options (Side) Ø5 – Ø27.5
Section Modulus (Cm3) Zxx 14.39
Moment of Inertia (Cm4) Ixx 84.56
Weight (kg/m) 3.0
Lipped Channels
55
117.5
R2.5
11.5
55
100
R2
1.6
12
55
75
R2.5
11.5
55
100
R2.5
11
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:05 Page 7
8
Section No. A3698
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø50
Holing Options (Side) Ø5 – Ø27.5
Section Modulus (Cm3) Zxx 15.12
Moment of Inertia (Cm4) Ixx 113.40
Weight (kg/m) 2.57
Section No. A3704
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø50
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 8.35
Moment of Inertia (Cm4) Ixx 41.75
Weight (kg/m) 2.0
Lipped Channels
Section No. A3706
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø100
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 21.1
Moment of Inertia (Cm4) Ixx 211.04
Weight (kg/m) 2.94
Section No. A3707
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø125
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 29.01
Moment of Inertia (Cm4) Ixx 362.65
Weight (kg/m) 3.41
55
150
R2.5
11.5
50
100
R2.5
11.5
11.5
11.5
50
200
R2.5
50
250
R2.5
Cold Formed Sections Lipped Channels
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:06 Page 8
9
Section No. A3708
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø50
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 8.93
Moment of Inertia (Cm4) Ixx 44.68
Weight (kg/m) 2.1
Section No. A3709
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø100
Holing Options (Side) Ø5 – Ø27.5
Section Modulus (Cm3) Zxx 81.05
Moment of Inertia (Cm4) Ixx 222.89
Weight (kg/m) 3.03
Lipped Channels
Section No. A3710
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø125
Holing Options (Side) Ø5 – Ø27.5
Section Modulus (Cm3) Zxx 30.49
Moment of Inertia (Cm4) Ixx 381.22
Weight (kg/m) 3.5
Section No. A3677
Gauge Range (mm) 1.6
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø80
Holing Options (Side) Ø5 – Ø30
Section Modulus (Cm3) Zxx 25.73
Moment of Inertia (Cm4) Ixx 212.30
Weight (kg/m) 3.91
55
100
R2.5
11.5
55
200
R2.5
11.5
11.5
55
250
R2.5
65
165
R2.5
14
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:06 Page 9
10
Section No. A3732
Gauge Range (mm) 1.6
Finish Galvanised 275g/m2
Steel Grade S280GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø90
Holing Options (Side) Ø5 – Ø32.5
Section Modulus (Cm3) Zxx 31.68
Moment of Inertia (Cm4) Ixx 307.30
Weight (kg/m) 4.23
Lipped Channels
65
13
1.6
194
Cold Formed Sections Lipped Channels
R2
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:06 Page 10
Plain Channels
11
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:06 Page 11
12
Section No. A3683
Gauge Range (mm) 2.0
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø80
Holing Options (Side) Ø5 – Ø16
Section Modulus (Cm3) Zxx 16.51
Moment of Inertia (Cm4) Ixx 136.22
Weight (kg/m) 3.14
Section No. A3684
Gauge Range (mm) 3.0
Finish Hot Rolled
Steel Grade S275
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø60
Holing Options (Side) Ø5 – Ø28
Section Modulus (Cm3) Zxx 24.65
Moment of Inertia (Cm4) Ixx 147.95
Weight (kg/m) 5.22
Plain Channels
Section No. A3686
Gauge Range (mm) 3.0
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø80
Holing Options (Side) Ø5 – Ø28
Section Modulus (Cm3) Zxx 39.56
Moment of Inertia (Cm4) Ixx 336.05
Weight (kg/m) 6.4
Section No. A3687
Gauge Range (mm) 1.8
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø38
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 1 7.96
Moment of Inertia (Cm4) Ixx 31.25
Weight (kg/m) 2.42
32
165
R2.5
56
120
R3
56
170
R3
50
78.5
73
R2.5
Cold Formed Sections Plain Channels
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:06 Page 12
13
Section No. A3699
Gauge Range (mm) 1.6
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø75
Holing Options (Side) Ø5 – Ø20
Section Modulus (Cm3) Zxx 15.34
Moment of Inertia (Cm4) Ixx 118.1
Weight (kg/m) 2.87
Section No. A3643
Gauge Range (mm) 1.5
Finish Galvanised 275g/m2
Steel Grade Z S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø75
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 16.44
Moment of Inertia (Cm4) Ixx 125.82
Weight (kg/m) 2.91
Plain Channels
Section No. A3679
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø35
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 5.38
Moment of Inertia (Cm4) Ixx 20.95
Weight (kg/m) 1.622
Section No. A3680
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø35
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 5.21
Moment of Inertia (Cm4) Ixx 19.42
Weight (kg/m) 1.59
50
74.5
R2.5
40
154
R2.5
50
78
R2.5
50
153
R2.5
75
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:06 Page 13
14
Section No. A3700
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø75
Holing Options (Side) Ø5 – Ø35
Section Modulus (Cm3) Zxx 17.01
Moment of Inertia (Cm4) Ixx 131.01
Weight (kg/m) 2.71
Section No. A3703
Gauge Range (mm) 2.0
Finish Galvanised 600g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø50
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 7.14
Moment of Inertia (Cm4) Ixx 38.93
Weight (kg/m) 2.18
Plain Channels
Section No. A3711
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø50
Holing Options (Side) Ø5 – Ø20
Section Modulus (Cm3) Zxx 6.72
Moment of Inertia (Cm4) Ixx 34.98
Weight (kg/m) 1.67
Section No. A3712
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø100
Holing Options (Side) Ø5 – Ø20
Section Modulus (Cm3) Zxx 17.38
Moment of Inertia (Cm4) Ixx 177.32
Weight (kg/m) 2.62
40
104
R2.5
70
154
R2.5
18109
R2.5
40
204
R2.5
Cold Formed Sections Plain Channels
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:06 Page 14
15
Section No. A3713
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø125
Holing Options (Side) Ø5 – Ø20
Section Modulus (Cm3) Zxx 24.21
Moment of Inertia (Cm4) Ixx 307.50
Weight (kg/m) 3.09
Section No. A3714
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø52
Holing Options (Side) Ø5 – Ø35
Section Modulus (Cm3) Zxx 10.38
Moment of Inertia (Cm4) Ixx 54.01
Weight (kg/m) 2.24
Plain Channels
Section No. A3716
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø100
Holing Options (Side) Ø5 – Ø35
Section Modulus (Cm3) Zxx 24.64
Moment of Inertia (Cm4) Ixx 251.35
Weight (kg/m) 3.18
70
104
R2.5
70
204
R2.5
40254
R2.5
Section No. A3717
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø102
Holing Options (Side) Ø5 – Ø35
Section Modulus (Cm3) Zxx 33.27
Moment of Inertia (Cm4) Ixx 422.53
Weight (kg/m) 3.65
70
254
R2.5
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:06 Page 15
16
Section No. A3719
Gauge Range (mm) 6.0
Finish Hot Rolled
Steel Grade S355
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø45
Holing Options (Side) Ø5 – Ø35
Section Modulus (Cm3) Zxx 41.5
Moment of Inertia (Cm4) Ixx 197.12
Weight (kg/m) 10.6
Plain Channels
Section No. A3721
Gauge Range (mm) 2.0
Finish Galvanised 600g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø55
Holing Options (Side) Ø5 – Ø7
Section Modulus (Cm3) Zxx 7.12
Moment of Inertia (Cm4) Ixx 40.33
Weight (kg/m) 2.18
Section No. A3641
Gauge Range (mm) 1.6
Finish Galvanised 275g/m2
Steel Grade S280
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø50
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 10.4
Moment of Inertia (Cm4) Ixx 54.03
Weight (kg/m) 2.48
75
95
R616
113
R2.5
Section No. A3737
Gauge Range (mm) 2.0
Finish Galvanised 600g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø55
Holing Options (Side) Ø5 – Ø12
Section Modulus (Cm3) Zxx 9.34
Moment of Inertia (Cm4) Ixx 54.19
Weight (kg/m) 2.49
50
104
R2.5
1.6
Cold Formed Sections Plain Channels
25116
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:06 Page 16
17
Section No. A3678
Gauge Range (mm) 2.0
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø100
Holing Options (Side) Ø5 – Ø50
Section Modulus (Cm3) Zxx 63.89
Moment of Inertia (Cm4) Ixx 629.37
Weight (kg/m) 7.5
Plain Channels
Section No. A3728
Gauge Range (mm) 2.5
Finish Galvanised 275g/m2
Steel Grade S280GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø50
Holing Options (Side) Ø5 – Ø40
Section Modulus (Cm3) Zxx 23.44
Moment of Inertia (Cm4) Ixx 124.23
Weight (kg/m) 4.97
Section No. A3729
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S280GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø40
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 6.01
Moment of Inertia (Cm4) Ixx 25.01
Weight (kg/m) 1.67
135
197
R3
1810
Section No. A3730
Gauge Range (mm) 1.6
Finish Galvanised 275g/m2
Steel Grade S280GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø40
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx 7.50
Moment of Inertia (Cm4) Ixx 30.02
Weight (kg/m) 2.19
80
106
R6
50
83.5
R2.5
1.2
2.5
50
80
R2
1.6
105
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:06 Page 17
18
Section No. A3731
Gauge Range (mm) 2.5
Finish Galvanised 275g/m2
Steel Grade S390GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø100
Holing Options (Side) Ø5 – Ø40
Section Modulus (Cm3) Zxx 52.89
Moment of Inertia (Cm4) Ixx 528.99
Weight (kg/m) 6.8
Plain Channels
Section No. A3734
Gauge Range (mm) 1.6
Finish Galvanised 275g/m2
Steel Grade S280GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø2
Holing Options (Side) Ø5 – Ø17
Section Modulus (Cm3) Zxx 3.05
Moment of Inertia (Cm4) Ixx 7.64
Weight (kg/m) 1.43
Section No. A3735
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade S280GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Ø5 – Ø25
Holing Options (Side) Ø5 – Ø17
Section Modulus (Cm3) Zxx 2.47
Moment of Inertia (Cm4) Ixx 6.61
Weight (kg/m) 1.11
80
200
R6
2.5
35
53.5
R2.5
1.2
35
50
R2.5
1.6
Cold Formed Sections Plain Channels
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:07 Page 18
19
Angle Sections
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:07 Page 19
20
Section No. A3589 Flange
Gauge Range (mm) 0.8
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) On Request
Holing Options (Side) On Request
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 0.57
Section No. A3590 Flange
Gauge Range (mm) 0.8
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) On Request
Holing Options (Side) On Request
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m)
Angle Sections
Section No. A3602 Flange
Gauge Range (mm) 0.8
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) On Request
Holing Options (Side) On Request
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m)
Section No. A3312 Angle Stiffener
Gauge Range (mm) 2.5
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Ø5 – Ø20
Holing Options (Side) Ø5 – Ø20
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 1.48
40
40
R2.5
27
188
34
279.5
36
38 10
1.2
2.5
Cold Formed Sections Angle Sections
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:07 Page 20
21
Section No. A3336 Angle Stiffener
Gauge Range (mm) 2.0
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Ø5 – Ø20
Holing Options (Side) Ø5 – Ø20
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 1.48
Section No.A3583 Angle Stiffener
Gauge Range (mm) 2.5
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Ø5 – Ø40
Holing Options (Side) Ø5 – Ø10
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 1.93
Angle Sections
Section No. A3555 Angle Stiffener
Gauge Range (mm) 1.6
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Ø5 – Ø20
Holing Options (Side) Ø5 – Ø20
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 1.09
40
20
30
2083
R2.5
2.5
Section No.A3742 Angle Stiffener
Gauge Range (mm) 1.5
Finish Galvanised 275g/m2
Steel Grade S350GD+Z
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Ø5 – Ø25
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 1.14
1.6
40
40
R2.5
2
50
50
1.5
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:07 Page 21
22
Section No. A3496 Angle Channel
Gauge Range (mm) 4.0
Finish As Rolled
Steel Grade HR4
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Ø5 – Ø60
Holing Options (Side) On Request
Section Modulus (Cm3) Zxx 9.39
Moment of Inertia (Cm4) Ixx 122.60
Weight (kg/m) 5.31
Angle Sections
40
130.5
12
4
2
Cold Formed Sections Angle Sections
Section No. A3645 Angle Stiffener
Gauge Range (mm) 2.0
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Ø5 – Ø20
Holing Options (Side) Ø5 – Ø25
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 1.75
50
25
40
6
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:07 Page 22
23
Slotted Channels
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:07 Page 23
24
Section No. A3630 Slotted Channel
Gauge Range (mm) 2.5
Finish Galvanised 275g/m2
Steel Grade S280GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Slotted
Holing Options (Side) N/A
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 1.14
Section No. A3631 Slotted Channel
Gauge Range (mm) 2.5
Finish Galvanised 275g/m2
Steel Grade S280GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Slotted
Holing Options (Side) N/A
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 2.62
Slotted Channels
Section No. A3632 Slotted Channel
Gauge Range (mm) 1.5
Finish Galvanised 275g/m2
Steel Grade S280GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Slotted
Holing Options (Side) N/A
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 1.15
Section No. A3633 Slotted Channel
Gauge Range (mm) 1.5
Finish Galvanised 275g/m2
Steel Grade S280GD+Z
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Slotted
Holing Options (Side) N/A
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 1.63
21
41
22
7.5
41
41
2.5
7.5
21
41
1.5
7.5
41
41
22
1.5
7.5
Cold Formed Sections Slotted Channels
Images shown are plain channels, Slotted Channels can also be manufactured.
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:08 Page 24
25
Service Duct Sections
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:08 Page 25
26
Section No. A3689 Oval Duct
Gauge Range (mm) 0.45
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) On Request
Holing Options (Side) On Request
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 0.45
Service Duct Sections
Section No. A3655 Oval Duct
Gauge Range (mm) 0.45
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) On Request
Holing Options (Side) On Request
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 0.85
21
43
Seam Interlock
1.5
21
71
Seam Interlock
1.5
Cold Formed Sections Service Duct Sections
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:08 Page 26
27
Structural, Fence,and Miscellaneous Sections
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:08 Page 27
28
U
Structural Eaves Beams
Steel Gauge Range (Z)Grade X 1.3 1.5 1.8 2.0 2.5 Aº Y US450GD+Z 100 4 4 4 4 65/60 18/17
S450GD+Z 125 4 4 4 4 3º 65/60 18/17
S450GD+Z 150 4 4 4 4 6º 65/60 18/17
S450GD+Z 200 4 4 4 4 10º 65/60 18/17
S450GD+Z 250 4 4 4 4 15º 65/60 18/17
S450GD+Z 300 4 4 4 4 90/82 18/17
Structural Z Sections
Steel Gauge Range (mm)Grade X 1.3 1.5 1.8 2.0 2.5 Y US450GD+Z 100 4 4 4 4 65/60 18/17
S450GD+Z 125 4 4 4 4 65/60 18/17
S450GD+Z 150 4 4 4 4 65/60 18/17
S450GD+Z 200 4 4 4 4 65/60 18/17
S450GD+Z 250 4 4 4 4 65/60 18/17
S450GD+Z 300 4 4 4 4 90/82 18/17
Structural Z Sections
Structural Eaves Beams
Lipped Structural C Sections
Steel Gauge Range (mm)Grade X 1.3 1.5 1.8 2.0 2.5 Y US450GD+Z 100 4 4 4 4 50,55,60,65 15
S450GD+Z 125 4 4 4 4 50,55,60,65 15
S450GD+Z 150 4 4 4 4 50,55,60,65 15
S450GD+Z 200 4 4 4 4 60,65 15
S450GD+Z 250 4 4 4 4 60,65 15
S450GD+Z 300 4 4 4 4 90 15
Lipped Structural C Sections
Tata Steel has a range of structural sections to suit most constructionapplications. Accessories such as tie bars and cleats are available for allof our structural sections. Please call us for more details.
Structural Sections
Y
X
Z
Z
X
Y
Y
Z
Aº
U
YU
Cold Formed Sections Structural, Fence and Miscellaneous Sections
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:08 Page 28
29
Section No. A3520 Paling Fence Rail
Gauge Range (mm) 2.0
Finish As Rolled/Galvanised
Steel Grade DD11
Length (Min/Max) 0.3m - 15m
Holing Options (Base) N/A
Holing Options (Side) N/A
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 1.59
24
65
Fence Sections
Fence Post
Gauge Range (mm) 4.0
Finish Hot Rolled
Steel Grade Various
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Call For Details
Holing Options (Side) Call For Details
Section Modulus (Cm3) Zxx 24.02
Moment of Inertia (Cm4) Ixx 132.16
Weight (kg/m) 6.24
49
110
R10.5
Angle
Gauge Range (mm) 6
Finish Hot Rolled
Steel Grade Various
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Ø5 – Ø20
Holing Options (Side) Ø5 – Ø20
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 4.71
50
50
6
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:08 Page 29
30
Section No. A3701 210x49 Z Profile
Gauge Range (mm) 5.0
Finish Hot Rolled
Steel Grade Various
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Call For Details
Holing Options (Side) Call For Details
Section Modulus (Cm3) Zxx 71.66
Moment of Inertia (Cm4) Ixx 788.27
Weight (kg/m) 11.26
Section No. A3685 160x49 Z Profile
Gauge Range (mm) 5.0
Finish Hot Rolled Steel
Grade Various
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Call For Details
Holing Options (Side) Call For Detail
Section Modulus (Cm3) Zxx 51.20
Moment of Inertia (Cm4) Ixx 409.63
Weight (kg/m) 9.60
Miscellaneous Sections
Section No. A3646 110 x 49 Z Profile
Gauge Range (mm) 5.0
Finish Hot Rolled
Steel Grade Various
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Call For Details
Holing Options (Side) Call For Details
Section Modulus (Cm3) Zxx 30.05
Moment of Inertia (Cm4) Ixx 165.32
Weight (kg/m) 9.60
Section No. A3647 125 x 90 Z Profile
Gauge Range (mm) 6.0
Finish Hot Rolled
Steel Grade Various
Length (Min/Max) 0.3m – 15m
Holing Options (Base) Call for Details
Holing Options (Side) Call for Details
Section Modulus (Cm3) Zxx 69.8
Moment of Inertia (Cm4) Ixx 436.28
Weight (kg/m) 14.9
49
210
R1049
160
R10
49
110
R10
90
125
Cold Formed Sections Structural, Fence and Miscellaneous Sections
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:08 Page 30
31
Section No. A3613 Cleat
Gauge Range (mm) 2.0
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) On Request
Holing Options (Side) On Request
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 0.31
Section No. A3300 Aerofoil Section
Gauge Range (mm) 0.4
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Call For Details
Holing Options (Side) Call For Details
Section Modulus (Cm3) Zxx N/A
Moment of Inertia (Cm4) Ixx N/A
Weight (kg/m) Call For Details
Miscellaneous Sections
Section No. A1401 Cycle Rack
Gauge Range (mm) 2.35
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Call For Details
Holing Options (Side) Call For Details
Section Modulus (Cm3) Zxx N/A
Moment of Inertia (Cm4) Ixx N/A
Weight (kg/m) 2.0
Section No. A3612 Cleat
Gauge Range (mm) 2.0
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) On Request
Holing Options (Side) On Request
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 0.29
21
29
39
2
2.35
21
29
47
2
68.5
R50
90º
46
43
R13
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:08 Page 31
32
Section No. A2547 Wearing Strip
Gauge Range (mm) 1.2
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Call For Details
Holing Options (Side) Call For Details
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 1.84
Miscellaneous Sections
Section No. A3652 W Stiffener
Gauge Range (mm) 1.6
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Call For Details
Holing Options (Side) Call For Details
Section Modulus (Cm3) Zxx 1.54
Moment of Inertia (Cm4) Ixx 2.58
Weight (kg/m) 1.72
Section No. A3407 Kickstrap Section
Gauge Range (mm) 1.6
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) On Request
Holing Options (Side) On Request
Section Modulus (Cm3) Zxx 0.23
Moment of Inertia (Cm4) Ixx 0.06
Weight (kg/m) 2.47
8310
1.2
33.5
34
1901976
3065
R6.3
6
Cold Formed Sections Structural, Fence and Miscellaneous Sections
Section No. A2456 Channel
Gauge Range (mm) 2.0
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) Call For Details
Holing Options (Side) Call For Details
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 1.51
R7
R1.5
2521
53
2
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:08 Page 32
33
Section No. A3541 Side Wall Post Section
Gauge Range (mm) 1.5
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) On Request
Holing Options (Side) On Request
Section Modulus (Cm3) Zxx 2.37
Moment of Inertia (Cm4) Ixx 2.55
Weight (kg/m) 3.17
Section No. A3582 Kick Strip
Gauge Range (mm) 1.5
Finish Galvanised 275g/m2
Steel Grade DX51
Length (Min/Max) 0.3m – 6m
Holing Options (Base) On Request
Holing Options (Side) On Request
Section Modulus (Cm3) Zxx 0.60
Moment of Inertia (Cm4) Ixx 0.181
Weight (kg/m) 3.40
Miscellaneous Sections
Section No. A3266 Half Tubular Section
Gauge Range (mm) 4.0
Finish Hot Rolled Steel
Grade DD11
Length (Min/Max) 0.3m - 6m
Holing Options (Base) N/A
Holing Options (Side) N/A
Section Modulus (Cm3) Zxx 2.18
Moment of Inertia (Cm4) Ixx 5.16
Weight (kg/m) 1.88
20
141.5
21.5208
2601.5
1.5
R25
60º
Section No. A3492 Outward Lipped Channel
Gauge Range (mm) 5.0
Finish Hot Rolled
Steel Grade DD11
Length (Min/Max) 0.3m - 6m
Holing Options (Base) Ø5 – Ø40
Holing Options (Side) Ø5 – Ø20
Section Modulus (Cm3) Zxx 79.20
Moment of Inertia (Cm4) Ixx 245.52
Weight (kg/m) 9.65
62
28
96.586.5
152.5
R10 R9
5
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:08 Page 33
9
12
34
Section No. A3562 Side Member
Gauge Range (mm) 0.25
Finish As Rolled (Stainless)
Steel Grade 316/316L
Length (Min/Max) 0.3m - 2m
Holing Options (Base) N/A
Holing Options (Side) N/A
Section Modulus (Cm3) Zxx On Request
Moment of Inertia (Cm4) Ixx On Request
Weight (kg/m) 0.159
Miscellaneous Sections
Cold Formed Sections Structural, Fence and Miscellaneous Sections
Section No. A3743 Heavy Plain Channel
Gauge Range (mm) 5.0
Finish Hot Rolled
Steel Grade S275
Length (Min/Max) 0.3m - 6m
Holing Options (Base) Ø5 – Ø55
Holing Options (Side) Ø5 – Ø30
Section Modulus (Cm3) Zxx 43.20
Moment of Inertia (Cm4) Ixx 248.41
Weight (kg/m) 9.30
Section No. A3744 Heavy Plain Channel
Gauge Range (mm) 5.0
Finish Hot Rolled
Steel Grade S275
Length (Min/Max) 0.3m - 6m
Holing Options (Base) Ø5 – Ø65
Holing Options (Side) Ø5 – Ø30
Section Modulus (Cm3) Zxx 50.85
Moment of Inertia (Cm4) Ixx 330.56
Weight (kg/m) 9.9
70
115
70
130
75
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:09 Page 34
35
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:09 Page 35
www.tatasteel.com
TSCSS01: 02/2011 English
Care has been taken to ensure that thecontents of this publication are accurate, butTata Steel Europe Limited and its subsidiaries,which includes Tata Steel UK Limited, do notaccept responsibility or liability for errorsor information that is found to be misleading.Suggestions for, or descriptions of, the end useor application of products or methods of workingare for information only and Tata Steel EuropeLimited and its subsidiaries accept no liability inrespect thereof.
Before using products or services supplied ormanufactured by Tata Steel Europe Limitedand its subsidiaries, customers should satisfythemselves as to their suitability.
Copyright 2011 Tata Steel UK Limited
Tata SteelLlanwern WorksNewportSouth Wales, NP19 4QZUnited KingdomT: +44 (0) 1633 290011F: +44 (0) 1633 464508E: [email protected] www.tatasteelcp.com
TATA Cold Steel Sections finalfinalfinal_Corus SRD brochure FINAL 10/02/2011 15:09 Page 36