Color Body Porcelain Floor & Wall Tile - Florida Tile - Enrich
TANGRAM - by Turf · TANGRAM carved wall tile PATENT PENDING Tangram is the right triangle for your...
Transcript of TANGRAM - by Turf · TANGRAM carved wall tile PATENT PENDING Tangram is the right triangle for your...
PAGE 1
TANGRAMcarved wall tile
PATENT PENDING
Tangram is the right triangle for your space. Tessellations of the wall tile offer endless possibilities—and address the acoustics of a space in a bold, graphic way. Made from sound-absorbing PET felt, the carved wall tile is available in TURF’s 9 mm felt colors.
[email protected] turf.design 844 TURF OMG TANGRAM PATENT PENDING 05.19 PAGE 2
SPECSPRODUCTTangram carved wall tile
CONTENTpolyester (PET) felt60% pre-consumer recycled
9MM TILEDIMENSIONS11.75" W x 11.75" H x 9 mm T
FELT THICKNESS9 mm
BEVELED EDGEcarved at a 45˚ angle4.5 mm from the bottom
FRONT VIEW
H
W
LAYOUTTangram’s triangular tiles may be configured in a variety of ways.
T
SIDE VIEWenlarged edge
[email protected] turf.design 844 TURF OMG TANGRAM PATENT PENDING 05.19 PAGE 3
01 CREAM 04 LIGHT GREY 05 WHITE 06 CHARCOAL 07 BLACK
14 GREEN 16 RED 20 MANGO 25 LIGHT BLUE 29 DARK BLUE
32 BROWN 38 MATTE GREY 39 LAVENDER 42 ORANGE 45 YELLOW
47 LIME 48 LIGHT BROWN
9MM FELTTURF’s Tangram carved wall tile is made with 9 mm recycled PET felt board.
The felting process used to create PET felt often results in a heathered effect where multiple tones are present. Slight and consistent variations in color should be expected when using this sustainable material.
Felt thickness may vary by up to 1/32" between 9 mm felt board colors.
Monitors and printers vary. Please request a material sample to verify felt colors.
[email protected] turf.design 844 TURF OMG TANGRAM PATENT PENDING 05.19 PAGE 4
ASTM C423-17: Type A Mounting. Carved wall tile NRC varies depending on field conditions and arrangement. Contact TURF for testing details.
TECHACOUSTICSASTM C423-17: Type A Mounting
FIRE RATINGASTM E-84 – Class A
VOCASTM D5116 Compliant
1.08
0.96
0.84
0.72
0.60
0.48
0.36
0.12
0.24
4000 Hz2000 Hz1000 Hz500 Hz250 Hz125 Hz
FREQUENCY
SO
UN
D A
BS
OR
BT
ION
CO
EF
FIC
IEN
T
9MM TILE: NRC = 0.25
DETAILS
LEAD TIMEships in four (4) weeks
INSTALLATIONTangram is available with or without an adhesive backing. More information is available in the carved wall tile installation instructions.
WARRANTYthree (3) years
MAINTENANCEVacuum occasionally to remove any particulate matter and air-borne debris or dust. Compressed air can be used to dust the material in difficult to reach areas for large assemblies. Use standard household cleaners for spot cleaning.
CUSTOMTangram carved wall tiles may be customized with additional layers and colors. Contact your rep for details.
A manufacturer-applied adhesive backing is available. The pressure-activated backing instantly adheres to a variety of wall surfaces.
Carved wall tiles without an adhesive backing should be installed with a construction-grade adhesive specified by the contractor.
ADHESIVE BACKING CONSTRUCTION ADHESIVE