TAMM Review - AAER MSTA 11/2015 28 - 30 Oct 2015 1.
-
Upload
lee-garrett -
Category
Documents
-
view
218 -
download
0
Transcript of TAMM Review - AAER MSTA 11/2015 28 - 30 Oct 2015 1.
TAMM Review - AAER
MSTA 11/2015
28 - 30 Oct 2015
1
INTRODUCTION
Streamline the understanding
Suit our current environment
Re-organise the order
Clarity - simple sentences, correct terminology & words
Ensure it is compliable/implementable
No major insertion
2
AFFECTED CHAPTERS
3
PART CHAPTER TITLE
1
2Overview of The State Technical Airworthiness Regulatory for Design-Related Engineering
5The Application of the Regulations to Designs Not Affecting Technical Airworthiness
2
1Regulation 1 : Application of Regulation and Procedural Rules
2Regulation 2 : Type Certification, Service Release and Design Acceptance
3Regulation 3 : Authorised Engineering Organisation (AEO)
3All
Chapters
SOME IMPORTANT CHANGES
4
Overview (Pt 1 Chap 2)
1. The word ‘Service’ replaced with ‘SAO’.
2. Design Acceptance Representative (DAR)
Requirement for aircraft acquisition offices to have DAR is withdrawn.
Emphasize on ‘Experience’ (QTE)
For non-SAO employee - restricted to commercial AEO which is also an aircraft OEM only
3. Emphasize SAO’s responsibility to obtain AEO certification (scope 'Configuration Management‘)
5
Regulation 1Application of Regulation and Procedural Rules
Regulation highlights:
1. Application of Regulations
2. Rulemaking : process to issue, amend or repeal a regulation
3. Authoritative Airworthiness Advise
4. Design Acceptance Representative (DAR)
5. Airworthiness Standards Representative (ASR)
6
Regulation 1
7
Title Changes1 Application of
Regulations(1.1.3 c)
‘Aeronautical product' and ‘Aircraft-related equipment' were added, apart from 'aircraft'.
2 Rulemaking -
3 Authoritative Airworthiness Advise(1.1.5)
Removed.‘Technical Airworthiness Directive (TAD) and Technical Airworthiness Advisory Circular (TAAC)’. ‘TAAC’ briefly defined.
4 DAR(1.2.2 a)
A person appointed to a designated DAR or ASR positions shall ‘notify’ the TAR for a delegation, replacing the previous requirement of ‘applying’ to the TAR.
5 ASR(1.3.2 a)
Regulation 2 - Highlights
1. Aircraft & certification Type Certificate (TC) Supplemental Type Certificate (STC) Certificate of Airworthiness (CoA ) Special Flight Permit (SFP) Service Release
2. Design Acceptance (modification) Classification of changes Statement of Requirement (SOR) Statement of Operating Intent (SOI) Airworthiness Standards
3. Civil Leased Aircraft
4. Unmanned Aircraft System (UAS)8
Regulation 2 - Changes
1. ‘Type Certification, Service Release and Design Acceptance’ to ‘Aircraft Certification, Design Acceptance and Service Release’.
2. Re-organise the order of regulations for ease of understanding
3. Create regulation on the requirements for new aircraft to obtain MSTC certification
4. Segregate regulations between new aircraft and aircraft undergoing major design change 9
Regulation 2 - Changes
Title Changes
a. Airworthiness Standards(2.5)
Review recognised standards that can be used as reference.
b. Special Flight Permit(2.6)
Include circumstances eligible for issuance of SFP.
c. Minor Design Change(2.8.1, 2.8.2)
Review ‘Design Acceptance’ and ‘Statement of Requirement’ (SOR).
d. Certificate of Airworthiness(2.9.1 b, 2.9.2)
Introduce:
1.DAR’s responsibilities
2.Requirement for annual review.
10
5. Improvements on the following Regulations:
Regulation 2 - Changes
Title Changes
e. Civil Leased Aircraft(2.11)
Requirements for DGTA to issue MSTC and CoA were withdrawn.
f. Unmanned Aerial System(2.12)
1. Initial requirement to submit Statement of Operating Intent (SOI)
2. Above 20 kg : treated the same as aircraft
3. 20 kg & below: registration not required
4. Flying operations under SAO OAA.
11
Regulation 3 - Changes
Regulation
Changes
1 3.2.3 a Sponsor AEO. Head of SAO Aviation Engineering Organisation.
2 3.2.7 c Duration. EAC issued to commercial AEO without formal instrument is limited to 12 months (or until revoked).
3 3.4.1 a Design. Definition of “Design” to include aviation software and aviation system containing software.
4 3.4.7 Inclusion of Regulation on Software Integrity management
5 3.5.1 CI Management. Includes aviation software Configuration Items 12
Thank you
13