Take a fresh breath with us.....

Nikhil Medico Equipments

Introduction

21 years of legacy in Healthcare industry…..

Our business area incorporates all the health care equipment solutions like

1. Modular Operation Theatre

2. Central Gas Management System

3. Liquid Oxygen Tank Installation

4. Ceiling units

5. Bed Head Panels

6. Control Panels

7. Other Accessories

´Nikhil Medico Equipments´ established at Nasik, Maharashtra has a

business legacy of about 21 years in the field of Healthcare Industry.

The company has made it to success at this stage with the

Engineering indignity of Mr. Anil Shete (B.E Chemical)

The company has grown its market hold all over these years in the

following Business Areas-

1. Supply and installation of Central Gas Pipeline System.

2. Installation of Modular Operation Theatres.

3. Complete trunkey solutions for hospitals including ceiling

mounted pendants, digital control panels, bed head panels, trunking

systems for ICUs, HVAC systems & epoxy/vinyl flooring.

Over the years these business areas have been quite developed and

leading to continuous improvement in the best possible way.

The Central Gas Management System

include-

1. Central Oxygen System.

2. Central Nitrous Oxide System.

3. Central Compressed Air System-Surgical Air.

4. Central Compressed Air System-Medical Air.

5. Central Carbon Dioxide System.

6. Central Vacuum/Suction System.

7. AGSS- Anesthetic Gas Scavenging System.

8. Liquid Medical Oxygen Tank Installation.

The company has done installation of

central gas management system in

various government medical colleges

and government institutions such as-

1. Dr. V. M. Govt. Medical College, Solapur.

2. Govt. Medical College, Aurangabad.

3. Govt. Medical College, Miraj.

4. Govt. Medical College, Dhule.

5. Civil Hospital, Nandurbar.

6. Govt. Medical College, Nagpur.

7. Nashik Municipal Corporation-Bytco

Hospital, Nashik.

8. Nashik Municipal Corporation-Zhakhir

Hussein Hospital, Nashik.

9. Indian Security Press Hospital, Nashik.

Similarly, some of the important

installations of the Central Gas

Management System in the private

sector include-

1.Yash Birla Group-Sujata Birla Memorial

Hospital, Nashik.

2.Deenanath Mangeshkar Hospital, Pune.

3.Manipal Group of Hospitals-Manipal

Hospital, Goa.

4.Sahyadri Group of Hospitals-Sahyadri

Hospital, Nashik.

5.KLE Society-KLE Hospital & Medical

College, Belgaum.

6.MVP Samaj-Dr. Vasantrao Pawar Medical

College, Nashik.

7.S.S.Hospital, Bangalore.

8.BLDE University Hospital,Bijapur.

9.KLE Society Hospital, Belgaum.

10.Nijlingappa Hospital, Bagalkot.

Many more in line with classes as more

than 500 bedded hospitals, 300 bedded &

100 bedded hospitals. Some installations

include turnkey projects of installation of

Liquid Medical Oxygen Tank along with

supply of Liquid Medical Oxygen on contract

basis for a period of 10 years.

Nikhil Medico Company Profile

Nikhil Medico Gases is been in the installation of Medical Gas Pipeline system

from last 21 years and they have completed Installations in 11 Government as

well as Private Medical College which includes Government Medical College at

Solapur, Aurangabad, Latur , Miraj and recently in Nagpur.

Nikhil Medico Gases not only have worked in Government field but also in

Private Hospitals like Wockhardt Hospital, Sahyadri Hospital, Manipal Hospital

and many more.

Nikhil Medico has completed installations in the range on 50 bedded hospitals

to 1000 bedded hospitals with the help of their trained and disciplined staff.

Nikhil Medico has recently joined hands with GCE, India where we will work

together and complete all the Medical Gas Pipeline Installations under their

supervision.

Healthcare is at the heart of what we do at the GCE Group. We are committed

to the manufacturing of high quality and innovative medical gas equipment and

associated accessories.

Our teams of experts are dedicated to providing leading solutions for our

customers. We work closely with healthcare professionals around the world,

supporting them to care for the patients.

GCE Healthcare products range from medical gas regulators, oxygen

concentrators to resuscitation and hospital ward equipment used in emergency,

hospital and homecare environments.

GCE products are manufactured and they comply with HTM 02-01 Standard and

with European Pharmacopeia and also all the products are CE Certified.

GCE Healthcare products range from medical gas regulators, oxygen

concentrators to resuscitation and hospital ward equipment used in emergency,

hospital and homecare environments

Nikhil Medico’s Product Range: Centralized Medical Gas Pipeline System (MGPS) –

Standards for Copper Fittings– Designed to meet the requirements of

EN 1254: Specification for Capillary Copper Fittings.

BS 684: Specification for Copper Fittings used with Copper Tubes

ASTM B280: Cleanliness Testing

HTM 02-01: NHS Health Technical Memorandum

BS EN 7396:Medical Gas Pipelines for Compressed Medical Gases and Vacuum

BS EN 740: Active Anesthetic Gas Scavenging Pipeline System

Standards for Medical Copper Tube –

All copper tubes from size 12 mm through 108 mm are engraved/ ink marked with te

following information EN 13348, nominal dimensions, manufacturer details, part NoBS EN

13348.

All Copper Pipes are Lloyd Certified with necessary Lloyd Certifications.

We Offer Provision for All Medical Gases with High Efficiency Medical Gas Pipeline System.

MGPS Used For Various Medical Gases like Oxygen, Medical Vacuum, Medical Air (4bar),

Surgical Air (7 Bar), Nitrous Oxide, CO2 & AGSS. This Medical Gas Pipeline Transfers All

Medical Gases From The Source To End Use At Hospitals. We Use High Quality Medical

Grade Copper Pipes & Fittings for the MGPS.

1. Isolation Valve:

To meet safety requirements, the gas supply to operating rooms etc must be fitted with a

device to allow instant shut off. To allow maintenance the gas supply must be controlled by

section. To achieve the demands of safety and maintenance, shut-off valves should be fitted

in every main line, riser and branch line in the pipe work system. The valves are degreased

and blown clean. They can be equipped with unions to be soldered to the copper piping.

Before delivery each valve is individually leak tested. The ball is sealed with washer of PTFE.

The stem is sealed with two silicon O–rings or PTFE washer. The valve housings are sealed

with an EPDM quality O–ring.

Technical Data –

Designed to meet the requirement of –

Complies with Medical Devices Directive 93/42/EEC

Complies with EN ISO 7396-1 (Central Gas Supply System)

Complies with EN 331 (Manually operated ball valves)

HTM 02-01: Health Technical Memorandum Medical Gas Pipeline Systems

2. Gas Outlets

Standards for Gas outlets: BAM, BSI, Norske Veritas, US Dot, UL, CEN, DIN, SIS

Medical terminal units provide quick and easy connection of hospital ward gas

equipment to the hospital gas source. The type of medical gasoutlets is decided by national

standards in each country and sometimes from local requests in each hospital. GCE complies

with ISO 7396 and national installation standards with secure products where every product

is fully tested in production. Our Medical gas outlets are in accordance with ISO EN 9170-1,

ISO EN 9170-2 international standards.

• Wall housing is compatible with all GCE MediUnit standards like DIN, BSI, SS, CZ

• All functional components are from brass

• Simple installation

• Fast connection and disconnection

• Designed for medical environment, Small size and Easy to clean

• Complies with colour coding and description by standard

Technical Specifications -

Standards –

Complies with Medical Devices Directive 93/42/EEC (CE0086) Class IIb

Complies with EN ISO 7396-1 (Central Gas Supply Systems)

Complies with EN ISO 9170-1 (Terminal units)

Complies with EN ISO 9170-2 (Terminal units for AGSS)

Complies with DIN 13260-2 Part 2: Dimensions and allocations of Probes and Gas

specific connection points for Terminal Units.

3. Area Valve Service Unit:

For safety and service reasons a central gas system must be equipped with shut off

valves placed so that the gas supply can easily be interrupted. The valves are

mounted in a box. The emergency shut-off valve box is delivered with connection

tubes and each box has been test pressurized and leakage tested. The emergency

shut-off valve has large ergonomical handles. If mounted in a recessed way, the

emergency shut-off valve box fits walls with 70 mm beam. With a 90 mm beam there

is extra space (23,5 mm) behind the valve box usable for e.g. fire isolation. All

models, also with four or five gases, fits between the beams in a CC-60 wall. The

box is gas-tight which prevents gas accumulation inside the wall. The product is CE–

marked according to EN ISO 7396-1.It is important that the boxes are placed so that

they are easily available for authorized personnel.

Technical details:

Standards –

Complies with Medical Devices Directive 93/42/EEC

Complies with EN ISO 7396-1 – Fully Compliant

present SIS HB 370 and HTM 02-01

4. Area Alarm

The alarms are summation alarms for both high and low pressure. In addition to this,

a failure in the computer communication system, or a damaged signal cable (for

example: cut off ) is also indicated. The loudness of the sound can be adjusted by

using the potentiometer placed behind the covering lid. At delivery the sound is set

at medium. The gas alarm G4 is available in two different designs, for recessed

mounting and for exposed mounting. The display will show any of eight languages

chosen from stickers enclosed. The alarm is equipped with are chargeable battery

in case of power failure.

Technical Data –

Standards –

Complies with Medical Devices Directive 93/42/EEC

Complies with EN ISO 7396-1 (Central Gas Supply Systems)

EMC tested in accordance EN 60601-1-2 (Emission and immunity)

5. Medical and Surgical Compressed Air Plant

We Supply High efficiency Medical Air 4bar and Surgical Air 7 bar with Medical

Grade Air Compressors – It consists of 4 Parts –

Air Pump with motor Automatic Switch Assembly

Air Reservoir with Auto Drain

Inter Connection Piping

Air Dryer, Desiccant Dryers, Filters

Compressed Air created is stored in the Airs Reservoir which is connected to the

piping network. All the time Air is maintained around 6 kg/cm2 to 9 kg/cm2. Now

depending on the requirement in the hospital when the air pressure comes down to

the lower Limit, the Air Pump automatically starts and when the higher limit

attained in the air reservoir the motor automatically disconnects.

Specific benefit Includes –

Fully complies to HTM 02-01, HTM 2022, C11, BS EN 7396, CE 0086 Class IIb

CE Marked under Medical Device Directive 93/42/EEC

Control and highly visible indication panel

Anti vibration mounts on all compressors.

6. Medical Vacuum Plant

We provide the vacuum needs of the hospital with the help of high quality medical

Vacuum Pumps.

It consists of following parts-

Air Cooled Vacuum Pump with motor

Vacuum Storage Vessel

Interconnecting Pipeline

Bacterial Filters

Vacuum Tank is maintained around 450 to 600 mm of HG. Automatic on off System

is used for Vacuum Pump. After certain set value of Vacuum in the storage tank

vacuum pump is automatically cut off.

Specific benefits include-

Fully complies to HTM 02-01, HTM 2022, C11, BSEN 7396

CE Marked under Medical Device Directive 93/42/EEC

Anti Vibration mounts on all pumps

All interconnecting pipe work is included.

7. AGSS Plant

AGSS System provides centralized and dedicated source for the safe removal of

exhaled anaesthetic gases from within the theatre, available in simplex and duplex

pump configurations dependant on individual requirement.

Specific benefit include –

Accessible easy installation

Digital control Panel indicates pipeline pressure

Adjustable from outside and can be placed on either side of unit

Easy to read digital display indicates pipeline pressure

Designed with minimal pressure drop for better plant performance

Easy to maintain and prevents large dust particles from entering the pump.

Designed to meet the requirement of –

HTM 02-01: Medical Gas Pipeline Systems

BS EN 6834 : Specification for Active Anesthetic Gas Scavenging Systems

ISO 7396-2: Anaesthetic Gas Scavenging Disposal Systems

8. Medical Gas Manifold:

All accessories are designed and manufactured according to the relevant

standard for high pressure systems.

The high pressure pipe components are manufactured in the following

materials: stainless steel AISI 316 L and brass CuZn39Pb3, and they are tested

at 360 bar. Cylinder holders for cylinders and connecting pipes are

manufactured in AISI 316.

Designed to meet the requirement of –

Complies with Medical Devices Directive 93/42/EEC

Complies with EN ISO 7396-1 (Central Gas Supply Systems)

Complies with EN ISO 21969 (High Pressure Flexible Connection)

9. Control Panel

The MC80 gas manifold is suitable for medium to large sized hospital.

It has a flow capacity up to 200 m3/h and is conveniently designed in modules.

The MC80 reduces the gas pressure in two steps to a constant distribution

pressure.

Service and tests can be carried out with no disturbance in the supply of gas

to the gas distribution system.

Fully Automatic Control Panel Semi Automatic Control Panel

Designed to meet the requirement of –

Complies with Medical Devices Directive 93/42/EEC

Complies with EN ISO 7396-1 (Central Gas Supply Systems)

Complies with EN 60601-1-2 (Electromagnetic compatibility)

present SIS HB 370 and HTM 02-01

10. BPC Flow meter with Humidifier Bottle:

• Flat surface float allows easy and safe reading of flow values by the users

• Ergonomic design , easy for cleaning

• Soft closing mechanism

• Resistant float against impact

• New scale - better reading of flow values.

Compatible with following standards –

Complies with medical devices directive 93/42/EEC.

Complies with EN 15 002

11. Vacuum Jar with Regulator:

• The suction level of the MediEvac+ is regulated via an easy accessible, front

mounted control knob

• A special feature of the MediEvac+ on-off valve is easy resumption of the

selected de-pressure value, whenthe treatment is interrupted

• The MediEvac+ gauge can easily be rotated, allowing the vacuum pressure

to be clearly viewed by theoperator

• The gauge scale is colour coded in sections to display a clear indication of

suction level

• Three versions of adjustable pressures are available to cover all therapy

needs (-250, -600 and –1000 mbar)

Compatible with following standards –

Complies with Medical Devices Directive 93/42/EEC.

Complies with EN ISO 10079-3 (Medical suction Equipment

Part 3: Suction equipment powered from a vacuum or pressure source).

12. Master Alarm

The purpose with alarm systems is to inform hospital personal about none standard

pressure deviation in the hospital medical gas systems.

It ensures that downtime, pressure changes, etc. will be indicated and personal are

informed in order to act according to hospital instructions.

The gas alarm GCE TOUCH is an alarm that has all necessary functions for an early

detection of these problems.GCE TOUCH is very easy to operate with its clear and

straight forward menu layout. It is a user-friendly alarmbased on a 7" LCD touch

screen display with graphic buttons, simple control and with lots of extra

functionality.

Technical Data –

Compatible with following Standards –

Complies with Medical Devices Directive 93/42/EEC.

13. Theatre Suction Unit –

This suction unit system allows to connect to the terminal units fitted on the

trolley head one or two vacuum regulators, preferably completed with the relative

safety jar. The slide bracket system on the stand allows accommodating up to 4

supports for the collection containers of suctioned fluids, disposable or not.

The trolley head fits also the catheter container support rings, one for each

suction circuit. This to allow the operator to safely store the patient tube after

use.

The trolley unit fits five antistatic rotating castors, two of which with locking

pedal, this to get always an easy, safe and rational positioning.

Compatible with following standards –

Complies with Medical Devices Directive 93/42/EEC.

Complies with EN ISO 10079-3 (Medical suction Equipment

Part 3: Suction equipment powered from a vacuum or pressure source).

14. Bed Head Panel

We Offer Various Types Of Bad Head Panels As Per Hospital Standards Includes

Vertical Bed Head Panels As Well As Horizontal Bed Head Panels. We Provide

Bed Head Panels In Aluminum With Duly Powder Coated With Various Colors

As Per Customers Choice.

Bed Head Panels Has Provision Of Gas Outlets, Electrical Sockets, & Nurse Call

System. We Also Provide Railing To The Bed Head Panels To Attach Accessories

Like Infusion Pump, I.V Bottle, Basket, and Examination Lamp.

Compatible with Standards –

EN ISO 11197:2009 Medical Supply Units

EN 737-1:1998 Medical gas pipeline Systems

EN ISO 7396_1:2007 Medical gas pipeline systems

HTM 2022 Medical gas pipeline systems

HTM 02-01 Medical gas pipeline systems

15. Medical Pendants

Ceiling Mounted Pendants Used For The Icu's & Operation Theaters. It Has Various

Types Types Like Vertical Fixed Pendants, Single Arm Pendants & Double Arm

Pendants. Gas Outlets Of Pendants Are Connected To The Gas Pipeline By The Hose

Pipe. Pendants Are Available In Aluminum Extrusion With Duly Powder Coated.

Pendants Has Facility For Gas Outlets, Monitor Tray, I.v. Stand, Electrical Switches

& Basket.

Liquid Oxygen Tank installation

LMOX tank installation with vaporiser and complete spool system

Liquid Medical Oxygen supply as Tri-party agreement solutions.

2

Introduction

18 years of legacy in Healthcare industry…..

Our business area incorporates all the health care equipment solutions like

1. Modular Operation Theatre

2. Central Gas Management System

3. Liquid Oxygen Tank Installation

4. Ceiling units

5. Bed Head Panels

7. Control Panels

6. Other Accessories

´Nikhil Medico Gases´ established at Nashik, Maharashtra has a business legacy of about 18 years in the

field of Healthcare Industry. The company has made it to success at this stage with the Engineering indignity of Mr.

Anil Shete (B.E. Chemical)

.

The company has grown its market hold all over these years in the following Business Areas-

1. Supply and installation of Central Gas Pipeline System.

2. Installation of Modular Operation Theatres.

3. Complete trunkey solutions for hospitals including ceiling mounted pendants, digital control pa nels, bed head

panels, trunking systems for ICUs, HVAC systems & epoxy/vinyl flooring.

Over the years these business areas have been quite developed and leading to continuous

improvement in the best possible way.

Area Valve Service Unit

(valve Box) Bpc Flow Meter

With Humidifier Bottle.

Isolation Ball Valves

Ward Vacuum Units. Plastic Saddle Suction Trolley. Pigtails.

Hose Pipe F A Valve

B. Accessories:-

1) Area Valve Service Unit (valve Box) 6) Suction Trolley.

2) BPC Flow Meter With Humidifier Bottle. 7) Pigtails.

3) Isolation Ball Valves 8) Hose Pipe

4) Ward Vacuum Units. 9) Copper Fittings.

5) Plastic Saddle 10) F A Valv

The Central Gas Management System

include-

1. Central Oxygen System.

2. Central Nitrous Oxide System.

3. Central Compressed Air System-Surgical Air. 3 4. Central Compressed Air System-Medical Air.

5. Central Carbon Dioxide System.

6. Central Vacuum/Suction System.

7. AGSS- Anesthetic Gas Scavenging System. Similarly, some of the important installations of the

8. Liquid Medical Oxygen Tank Installation. Central Gas Management System in the private

sector include- The company has done installation of central gas

1. Yash Birla Group-Sujata Birla Memorial Hospital,

management system in various government Nashik.

medical colleges and government institutions 2. Deenanath Mangeshkar Hospital, Pune.

such as-

3. Manipal Group of Hospitals-Manipal Hospital, Goa. 1. Dr. V. M. Govt. Medical College, Solapur.

4. Sahyadri Group of Hospitals-Sahyadri Hospital,

2. Govt. Medical College, Aurangabad. Nashik.

3. Govt. Medical College, Miraj.

5. KLE Society-KLE Hospital & Medical College,

4. Govt. Medical College, Dhule. Belgaum.

5. Civil Hospital, Nandurbar.

6. MVP Samaj-Dr. Vasantrao Pawar Medical College,

6. Govt. Medical College, Nagpur. Nashik.

7. Nashik Municipal Corporation-Bytco Hospital,

7. S.S.Hospital, Bangalore.

Nashik. 8. BLDE University Hospital,Bijapur.

8. Nashik Municipal Corporation-Zhakhir Hussein 9. KLE Society Hospital, Belgaum.

Hospital, Nashik.

10. Nijlingappa Hospital, Bagalkot. 9. Indian Security Press Hospital, Nashik.

Many more in line with classes as more than 500

bedded hospitals, 300 bedded & 100 bedded hospitals.

Some installations include trunkey projects of installation

of Liquid Medical Oxygen Tank along with supply of

Liquid Medical Oxygen on contract basis for a period of

10 years.

Our references….. and many more….still counting.

Our strategic partners & suppliers….

Standards that we are associated with…..

NIKHIL MEDICO EQUIPMENTS

Regd. Office : 6, Hill-Top, Apt., Mahatma Nagar, Nashik, Maharashtra. (India) Works: B-254, Malegaon M.I.D.C., Sinnar, Nashik. Maharashtra. (India)

Tel.: + 91 - 253 -2355703

Email : sales@nikhilmedico.com Website : www.nikhilmedico.com