Take the trouble out of troubleshooting. - RS Components...accordance with DIN 47100 • Cores...

Maintenance MattersSupporting the fast-paced world of a maintenance engineer

www.rs-online.com

Take the trouble out of troubleshooting.

¢ Automatic CT recognition

¢ Automatic connection verification

¢ On-board data analysis

¢ SD card and USB stick support

¢ 1000 V ac and dc range

¢ Scope and DMM modes

¢ CATIV @ 600 V

¢ IEC61000-4-30 Class A compliant

MPQ1000Power Quality Analyzer

The Megger MPQ1000 Power Quality Analyzer is Class A compliant and rated CAT IV at 600V. It can be used for a wide variety of applications including substation monitoring, equipment and breaker tripping, load studies and balancing as well as for switchgear and component failure.

Some of its features include:

Power on with Megger.

3

Leading Suppliers

Modern MaintenanceRS understands the latest technologies and products, allowing us to provide everything a modern maintenance engineer needs.

SINGAPORE +65 6865 3400 [email protected] sg.rs-online.com

MALAYSIA +603 5021 [email protected]

PHILIPPINES +632 888 [email protected]

THAILAND +66 2 648 [email protected]

INDONESIA, VIETNAM, CAMBODIA, BRUNEI, MYANMAR & LAOS +852 2610 6426 / +852 9738 [email protected]

Need a quote?Enjoy super savings with our quotation services. Contact us today to see how much you could save.

Terms & ConditionsTo view our latest prices, charges and full terms see RS Conditions of Sale as set out online at www.rs-online.com.

RS Components Ltd. 2018

Join the conversation

ContentsUnplanned maintenance and the resulting production downtime is the bane of most organisations. Deloitte reports that such downtime costs industrial manufacturers £37 billion [US$50 billion], and that 42% downtime is caused by equipment failure.The combination of connected technology (the Industrial Internet of Things) becoming available at lower costs and greater data analytics makes it possible to monitor almost any machine and predict failure before it happens. This makes it possible for organisations to identify problems and plan downtime to suit their own schedule.

However, access to a range of sensors is only part of the overall picture.

“Intelligent maintenance is more than just technology and products, it's actually a way of thinking,”

says Richard Jeffers, Technical Director Northern Europe at RS. “It’s about anticipating potential failure and taking the right action to prevent or reduce the impact of that failure on your operations. Technology is what you use to enable and make predicting failure easier.”

The first step for organisations looking to reduce their unplanned maintenance, according to Jeffers, is to recognise the value of a predictive approach. Deloitte has found that predictive maintenance can“reduce the time required to plan maintenance by 20% to 50%, increase equipment uptime and availability by 10% to 20%, and reduce overall maintenance costs by 5% to 10%”. For many organisations, and their maintenance teams, the big question around smarter maintenance is where to start. For a lot of businesses, the test and learn approach works best as individuals and the organisation as a whole establish the best solutions for their needs.

“I visited a customer’s logistics site recently and they have taken a very sensible approach to introducing maintenance intelligence into the business,” recalls Jeffers. “They had around 800 motors in their building but had identified 13 that were crucial to their operations, so they have put temperature and vibration sensors on those motors to alert the maintenance team if they start to fail. This is a trial, but the business will start to roll out the technology to other motors over the next year as the technology proves itself.”

For many organisations, there is a need for expert help and access to knowledge that will help them adopt new technology. Recent research by RS and the Chartered Institute of Procurement and Supply showed that 54% of procurement and supply professionals in the maintenance, repair and operations function want access to knowledge services from suppliers, not just the products.

“RS provides a range of sensors for customers looking to adopt and enable their smart maintenance strategy,” says Jeffers. “But we also have expertise within the business to help customers understand and make the most of IIoT. We are using this technology in our own warehouse in Nuneaton, so we have first-hand knowledge of the technology in practice.”

Why

it's

tim

e to

re

-thin

k yo

ur a

ppro

ach

to

Mai

nten

ance

03 PROCUREMENT FOCUS ON MRO

04 CASE STUDY

06 CABLE, WIRE & ACCESSORIES

07 HVAC & LIGHTING

08 ELECTRICAL TEST & MEASUREMENT

09 POWER CONNECTORS

10 SAFETY SIGNS & LABELS

11WHY IS PLANNED MAINTENANCE IMPORTANT?

12 CIRCUIT PROTECTION & CIRCUIT BREAKERS

13 CONTACTORS

14 CONVEYOR COMPONENTS

15 INDUSTRIAL SWITCHES

16 RS PRO IN PRODUCTION LINES

17 WORK SMARTER, NOT HARDER

18 TOOL KITS

20 CASTORS & WHEELS

21 CONNECTORS

22 FASTENERS & FIXINGS

23 ENERGY EFFICIENCY RANGE

54

Cutting the MRO costsof a confectionary giantRS has helped a leading confectionery manufacturer achieve significant cost savings in the indirect procurement process through its Purchasing Manager™ system.End inefficient, costly procurement processes Procurement teams and engineers face a number of challenges when it comes to the maintenance, repair and operation of their organisation’s assets and facilities. The supply chain for indirect materials is complex due to the number of stakeholders involved, a fragmented supply base and the sheer number of products split across multiple categories. In addition, there is constant pressure from senior management to reduce costs.

As one of the largest suppliers of industrial supplies, RS is in a unique position to understand the complex needs of its customers and to help these businesses improve their processes and make efficiencies.

The crucial statistic for organisations to understand is that with indirect procurement, process costs can be twice as much as the amount spent on the products themselves. So if your organisation spends £100,000 on purchasing products over the course of a year, you will spend a further £200,000 on processing or ‘soft costs’.

2:1Indirect (MRO)process costs

Indirect (MRO)product costs

As such, there is significant value in reducing process costs, rather than focusing purely on the purchase price of individual items.

The challenge

An example of how RS has been able to help a customer take better control of its process costs is our work with a well-known confectionery manufacturer, a market leader within its category with a turnover in excess of £100 million.

RS has worked with this company for a number of years, supplying a wide variety of products. This includes electrical and automation products, PPE equipment, tools and test equipment, which are used by maintenance engineers to help keep operations running.

As a large organisation, the confectionary manufacturer had a long-term plan to streamline their purchasing process, which included reviewing all indirect spend. The procurement department was challenged to reduce admin and bureaucracy around the purchasing process so that it would be quicker and require less input from multiple stakeholders across the business.

Typically, the customer was spending significant time locating suppliers who had the products they needed and then comparing quotes; raising POs with a finance team; and arranging for delivery to be achieved in a time that didn’t impact the day- day business.

They also felt there was a great deal of duplication and manual entry of information during purchasing. In short, the process was delaying procurement of low-value products, while taking valuable time away from employees’ core responsibilities.

The solutionThe first step was to process map the company’s current procure-to-pay process. This was led by RS’s dedicated team of eCommerce specialists and the customer’s key stakeholders then, using a process cost calculator (produced in collaboration with Chartered Institute of Procurement & Supply), it was possible to calculate the time taken for each process step in order to produce the total cost to the company for every order they place.

By doing this, it was identified that each PO raised, took 88 minutes from end to end, costing £74 per order. For RS alone, they were placing over 200 orders annually, with a similar number of orders being placed with multiple suppliers.

RS found that the simplest way to remove many of the issues (and additional cost) in the process was to introduce PurchasingManager™ to the customer. PurchasingManager™ is a web-based, order management system used alongside the RS website. Buyers can create account structures across their organisation, assign spend controls, cost centres and approval limits to help manage all RS Online purchasing.

The system allows the end user, usually an engineer, to go onto the RS website, choose the product they need, order it and see when the delivery will be made. Behind the scenes a confirmation request is sent to a senior colleague who can quickly approve the cost and the order is processed.

PurchasingManager™ addressed the authorisation process and became the only authorisation required to approve an order from RS. Once an order is approved, it is sent directly to RS without procurement being involved. The confectionery customer was able to use a single monthly blanket order rather than individual POs, meaning that the only PO processing now takes place at the end of the month.

The existing process was unnecessarily complicated:

• An engineer would choose a basket of goods, raise a paper requisition and send it to their superior for authorisation

• Once this authorisation was granted the requisition was sent to procurement. Procurement would then check the price online before raising a purchase order

• The purchase order would need to be signed off by the head of procurement before the PO was emailed to RS for fulfilment

• Once the goods were delivered, a three-way match was needed between the email request, the PO on their system and the individual invoices

The outcome The customer now has a simplified workflow with empowered end users, which has significantly reduced processing costs, enabling all functions involved in the indirect purchasing process to focus on value added activities in their respective roles. The customer has moved from an average cost per order of £74 before PurchasingManager™ was introduced, to £46 now. The number of orders also increased to 1,089 annually as they consolidated more orders with RS, reducing their supplier base. Based on the new cost per order, this equated to a £30,492 savings annually compared to their old process.

The entire purchasing process has been greatly speeded up, more employees are ordering from trusted suppliers (rather than using local or online purchases), which improves contract compliance, and parts are being successfully delivered when engineers want them, which means there is far less downtime.

The result is that the customer has gone from an inefficient, costly process with too much duplication of tasks and a lack of clarity to becoming highly efficient with real transparency throughout the purchase-to-pay process.

£30,492 (3.7 weeks) Savings per year Time per year

7

HVAC & LIGHTING

Visit www.rs-online.com to order today!

6

CABLE, WIRE & ACCESSORIES


383-709 2 Core 0.34mm² CSA

383-715 3 Core 0.34mm² CSA

383-721 4 Core 0.34mm² CSA

RS Pro Industrial Cable• Fine-strand copper wire with PVC insulation• Colour and strand coding in

accordance with DIN 47100• Cores stranded in layers

NA

491-879 3 Core 0.75mm² Black Polyvinyl Chloride PVC Sheath 50m, 6A 300V, 2183Y H03VV-F

491-885 3 Core 0.75mm² White Polyvinyl Chloride PVC Sheath 50m, 6A 300V, 2183Y H03VV-F

491-881 3 Core 1mm² Black Polyvinyl Chloride PVC Sheath 100m, 10A 500V, 3183Y H05VV-F

RS Pro Mains Power Cable• Flexible copper conductors PVC

sheath and insulation • For use in dry or wet conditions

NA

522-452 8 Core, 1.5mm², 50m, Unscreened



RS Pro YY Control Cable• Suitable for dry or moist conditions indoors • Can be used outdoors when protected • >500 MΩ*Km Min. insulation

DC resistance at 20°C

NA

673-3245 5 Core, 0.35mm² CSA, (LSZH) Sheath, 30m Reel

MPN: 1175L SL005


MPN: 1176L SL005


MPN: 1178L SL005

Alpha Wire Unshielded Multi-Conductor Industrial Cable• Tinned copper conductors

that resist corrosion • Stranded conductors for

installation flexibility

NA

510-2123 RG59 Coaxial Cable, (LSZH) Sheath 100m, 75Ω

MPN: 443945.00100

510-2139 RG59 Coaxial Cable, (FRNC) Sheath 100m, 75Ω

MPN: 449945.00100

Belden RG59/U Coaxial Cable• Solid conductor• 93% braid coverage• Rated CMG

NA

NA

389-583 PG9 Grey Polyamide MPN: 53015010+53019010

389-599 PG11 Grey Polyamide MPN: 53015020+53019020

389-606 PG13.5 Grey Polyamide MPN: 53015030+53019030

Lapp Skintop IP68 PG Nylon Gland• High oil resistance• Permanent vibration protection• Variable clamping ranges• Optimum strain relief

918-2530 3L water tank, 20L/day extraction

RS Pro Dehumidifier• 20 L/day dehumidification capacity• 3 L water collection tank• 500 W Power consumption (peak)• Reciprocating compressor

NA

NA

471-7342 265 x 200mm MPN: SK3286300

471-7358 344 x 268mm MPN: SK3286400

Rittal HVAC Air Filter• Range of Top Therm air conditioning units from 300 → 1500W• Air conditioning units are fitted on cabinets

with a degree of sealing of at least IP54• They allow heat to be

evacuated from electrical equipment cabinets, while maintaining IP54 status

730-2883 G4 Grade, 292 x 594 x 95mm

730-2892 G4 Grade, 292 x 594 x 45mm

730-2895 G4 Grade, 292 x 292 x 45mm

RS Pro Standard Pleated Panel Filters• Filter Type: Pleated Panel • Filter MERV Rating: 8• Filter Grade: G4

NA

813-806 TT911/10K3A1, Interior Room

813-828 TT531/10K3A1, Outside Air

813-834 TT-341-A, Pipe

RS Pro Temperature Sensor• Maximum Temperature Sensed: +40°C • Minimum Temperature Sensed: -10°C • Range of Temperatures Sensed: -10°C to +40°C

NA

157-5628 T6360B1028, SPDT 10A, 2A, 3A, 6A MPN: T6360B1028

Honeywell HVAC Thermostat• Dual diaphragm temperature sensing element• Suitable for surface or switch box mounting• Contact rating: 10(3) A (SPCO)

NA

494-7880 Twin Spot 2 x 21 W Halogen

RS Pro Emergency Spotlights• Optional - Switch for testing emergency mode• Powered by 2 x 6V 12Ah batteries (not supplied)• Battery cut-off prevents deep discharge

NA

9

POWER CONNECTORS


8

ELECTRICAL TEST & MEASUREMENT


123-3252 Max Current 300A AC, 300A DC CAT III 300V

RS Pro ICM30R AC-DC Current Clamp Multimeter• True-RMS reading• 4000 Count digital display• Auto-ranging

NA

NA

765-3658 CAT III 600V, CAT IV 300V MPN: FLUKE 323

765-3660 Max Current 400A AC/DC, CAT III 600V, CAT IV 300V

MPN: FLUKE 325

Fluke 320 Series True RMS Clampmeters• True RMS AC voltage and current for accurate

measurements on non-linear signals• The 325 also supports DC current measurement and min / max • Ergonomic and slender design

763-9267 MIT515, 10TΩ CAT IV MPN: 1001-935 (UK) 1001-937 (EU)

Megger Insulation Tester• 10 TΩ (5 kV) / 20 TΩ (10 kV) max.

insulation resistance• Timed IR plus PI and DAR diagnostic tests• Operate with dead battery when

on line power/mains

NA

123-1933 CAT IV 300V 400Hz 690Vac

RS Pro Phase Rotation Indicator LCD• Nominal Voltage: 40 V to 690 V ac• Frequency Range: 15 Hz to 400 Hz• Current Pickup: 1 mA

NA

719-0885 13A 200 → 250Vac CAT II 300V, Model CP-501 MPN: RSCP501

719-0891 13A 230Vac CAT IV 300V, Model BZ101 MPN: RSBZ101

Martindale Mains Socket Tester• Ideal for testing 13A sockets • Three bright LED's show wiring status• Flame retardant ABS casing

NA

NA

136-7891 Depth 2m CAT III 300V, Voltage 400V

RS1012 Cable Locator Kit• Automatic or manual adjustment of receiving signal sensitivity • Acoustical receiving signal switchable • Auto Power Off

881-3668 Male C20, 20A, 250 Vac, 50/60Hz MPN: 6609007-8

161-5068 Male C20, 20A, 250 Vac, 50/60Hz MPN: 6609007-8

881-3674 Male C14, 15A, 250 Vac, 50/60Hz MPN: 6609987-7

TE Connectivity IEC Filter• Superior EMI filter with IEC 60320-1 inlet• Up to 15A with IEC 60320-1 C14 inlet• 20A rating with IEC 60320-1 C20 inlet

NA

500-660 9.5A, 600 Vac/dc MPN: 172328-1

500-569 9A, 600 Vac MPN: 794939-1

500-654 9.5A, 600 Vac MPN: 172336-1

TE Connectivity Wire to Wire Connector Socket• Suitable for mounting directly to a free

cable or panel allowing wire to wire and wire to panel connections

• Accepts male or female contacts• Fully polarised housings

NA

300-3103 Male, 16 Way, 16A, 250 V MPN: 1-1103416-1

416-622 Male, 11 Way, 16A, 250 V MPN: 7-1103414-1

164-8440 HA Inserts MPN: 1-1103402-1

TE Connectivity HA inserts• Each insert has a separate earth contact• Sequential numbering for high

density applications• Twist locked

NA

718-3727 9A, 250 Vac, 2-way pin MPN: 2-640497-4

718-3391 9A, 250 Vac, 36-way pin MPN: 2-640506-4

TE Connectivity Through Hole Industrial Power Plug• These receptacle style headers are PCB

through hole vertical mounting and have UL94V-0 brick red nylon housings.

• Current Rating: 9A • Plug/Socket: Plug

NA

NA

870-2274 V-Lock IEC Power Cords MPN: 6051.2001

295-8759 C19 Cable Mount IEC Socket MPN: 4795.0000

539-2067 C14 Panel Mount IEC Plug MPN: 6100.3100

SCHURTER Power Supply CableThe V-Lock range of IEC power cords offer an extensive variety of IEC connections and are available with various sockets to choose from depending on the required country of use.

NA

708-5610 1A, 250 V ac MPN: 5120.2000.0

708-5663 8A, 250 V ac MPN: DD12.8321.111

878-4513 Panel Mount 6A @ 40°C 250V AC MPN: 5500.2029

SCHURTER Filtered inlet 5120 series• Compact high performance filter• Optimal shielding due to filter case closed completely• Designed for standard and medical applications

11

RS PRO SAFETY SIGNS & LABELS


10

SAFETY SIGNS & LABELS


Basically, for a cost of £1,375 any company can access two key tools for a 12 month period.

In fact across many industries unplanned downtime can often be up to six times more expensive than planned maintenance and also ensures that valuable time and resources are wasted during repair.

Just think of the cost when you call an emergency plumber if you have a leak in your bathroom at home, it’s very much the same concept. The shorter the notice and the higher the urgency, the more you will have to pay. Add in to that equation that these things rarely happen at a convenient time, planning and prevention are certainly the way forward.

That is why it is so important to implement a planned maintenance programme in industry, to take place when all of the required resources are readily available and at a time that will cause the least disruption to operations and customers. This then allows key decisions to also be made in advance, such as whether it should be carried out by an internal maintenance team or out-sourced to contractors. You can also factor in the time, budget, equipment and expertise required for each job. Those luxuries are not afforded when something goes unexpectedly wrong.

Often the best guidance for regular maintenance timings and requirements comes from the manufacturer’s own recommendations, and whilst in an ideal world they would be consulted or even assist with each organisation’s maintenance plan, in real life that is rarely possible or cost effective.

It is for this reason that the recently partnership between RS Components and Schneider Electric drew my interest, as it could signal the ability to enable just that scenario for organisations across the UK.

They have recently launched an off the shelf ‘Service in a Box’ package, which is designed to complement the planned maintenance programme of any company, no matter how big or small for a fixed price.

The first is a dedicated 24/7 telephone technical support line, which is available 365 days per year. In other words you would have a direct telephone number to speak with an application based product expert from the manufacturer at any time of the day or night. This even comes with a guarantee that you will receive fast and efficient service during the busiest call periods.

However, in truth it was the second part that really caught my attention. Included in the ‘Service in a Box’ is one full engineer day on your plant or site for a Schneider Electric engineer. That is eight hours with the manufacturer’s own engineer on site. What’s more, there is a choice of services that they are able to carry out during the visit, providing it is previously agreed in a scope of work and fits within the allotted time.

Maybe you have recently ordered Schneider Electric products from RS Components, but need them installed or commissioned? The Schneider engineer could complete this for a number of automation applications, including panels, motors or PLC-based applications.

Alternatively they can compile a complete Health Check of your Schneider application covering product and system visual inspection, diagnostics and interrogation. Once complete they will then send a thorough Health Check report outlining findings, advising on obsolescence, optional upgrade paths and any possible cautions or warnings to help reduce downtime. After receiving this report, you can then organise a free of charge follow up visit from an RS Account Manager to discuss any ongoing requirements if necessary.

Or maybe your business would benefit more from training for your maintenance employees? Again this could be utilized as part of the one engineer day.

It certainly seems like it could be a great asset for companies big and small who have Schneider products installed.

Robbie Dunion DesignSpark Communications Executive

I know of manufacturers who have paid six figure sums or emergency maintenance and had specific parts delivered cross-country in a taxi, just because the consequences of downtime on their production line can be millions of pounds per hour to them.

Why Is Planned Maintenance Important?

776-0932 60 x 20mm

RS Pro Hazard and Warning Labels• Vinyl self adhesive labels• ISO7010• Text Message: Danger Disconnect the

mains supply before removing this cover

NA

NA

776-0939 12.5 x 12.5mm

RS Pro Hazard and Warning Labels• Vinyl self adhesive labels.• ISO7010 • Text Message: Symbol

776-0967 50 x 50mm

RS Pro Electric flash symbol sign• Self-adhesive vinyl safety sign• ISO7010• Hazard Signs

NA

813-4514 100 x 100mm

RS Pro ISO 7010 Vinyl Pictogram Signs• Sign Description: Fire Extinguisher • Self-Adhesive: Yes • Material: Vinyl

NA

763-2033 210 x 148mm

RS Pro Fire Action Noices• Environmentally friendly and durable• 1.2mm Polypropolene• SAV = Self Adhesive Vinyl -easy to peel and apply

NA

795-9763 4W, Ceiling Mount

795-9744 8W, Ceiling/Wall Mount

RS Pro Recessed LED Maintained Emergency Exit Sign• 3 hour emergency exit sign• Maintained (M3)• 4.8V 800mAh

Ni-Cd batteries

NA

13

CONTACTORS


12

CIRCUIT PROTECTION & CIRCUIT BREAKERS


711-6896 1P, 3A, 5kA, Curve C MPN: MGN61503




Schneider C60H-DC Circuit Breakers• Range: Multi 9 • Series: MGN • Number of Poles: 1• C curve - Overcurrent protection

for any type of application• Compatible with C60 auxiliaries

and accessories

NA

612-5335 Analogue Output, 27Vdc max, 93mA max

MPN: MTL7787+/RS

MTL 7700 Series Safety Barrier• Standard DIN rail mount• Removable, colour-coded terminals• Bussed power feed to other modules

NA

132-071 S200 MCB 10A 2 Pole Type C 10kA MPN: 2CDS272001R0104


132-093 S200 MCB 6A 2 Pole Type B 10kA MPN: 2CDS272001R0065


ABB System M Pro S200 MCB• Range: System M Pro • Series: S200 • Number of Poles: 2

NA

829-4571 BS Din Rail Mounting Modular Socket MPN: 2CSM259343R0721

ABB DIN Rail Mount Electrical Sockets• Available in various world socket standards• Quickly connected• Colour Grey• Power loss 0.6W per pole

NA

NA

533-0003 5Vdc in, 100kHz MPN: 2964270

533-0019 24Vdc in, 100kHz MPN: 2964283

533-0025 24Vdc in/24Vdc out MPN: 2941374

Phoenix Contact Optocoupler• DC in/DC out, DC in/AC out and AC in/DC out versions available• Versions with switching speeds up to 100kHz available• 2.5kVac input to output isolation• LED status indication• Module width 6.2mm• Operating temperature range:

-20°C to +60°C

124-7725 16A 1+N-pole 10mA 230V 2mW MPN: 5SV3111-6




Siemens 5SV3 RCCBs• Silicone Free• 2 or 4 pole• Instant tripping, surge current

withstand capability >1kA• DIN rail mounting• Equipment life span: >10 000 Switching cycles• Enclosure: IP20• Ambient temperature: -25°C to 45°C

NA

187-302 25A, 3NO, 240V, 50/60Hz MPN: LC1D25U7

187-324 12A 1NO+1NC 240V 50/60Hz MPN: LC1D12U7

187-661 32A 1NO+INC 240V 50/60/Hz MPN: LC1D32U7

Schneider Tesys D LC1D 3 Pole Contactor• Utilisation category AC3• 415 Vac switching voltage• Pole Contact Composition: 3 NO

NA

758-939 0.8-1.2A FLC range MPN: LR2K0306




Schneider Thermal Overload Relays• Phase failure sensitive• Test Button• Trip-Fault Indication

NA

394-9346 9-13A FLC range MPN: LRD16


394-9368 5.5-8A FLC range MPN: LRD12


Schneider 3-pole Thermal Overload Relays• Adjustable relay setting dial• Test button• Stop button

NA

243-6631 4kW 9A 24Vdc coil S00, 1NO MPN: 3RT10161BB41

243-6647 4kW 9A 24Vdc coil S00, 1NC MPN: 3RT10161BB42

Siemens Contactors – 3RT10 Range• Various NO/NC models available• Maximum switching voltage: 690V• Mechanical life: 3 x 107 operations

NA

246-5055 1 NO 1 NC cross mount auxiliary contact MPN: 3RV19011E

Siemens Auxiliary Contacts• Current rating 2A• UL, CSA, VDE approved• IP20

NA

818-277 1 NO 1 NC side fitting auxiliary contact MPN: NHI11-PKZ0

Eaton Auxiliary Contacts• For fitting to front or right hand

side of MPCB - PKZM0• Standard versions operate when

unit is 'ON' or 'OFF'• Trip indicating versions identify overload

and short-circuit conditions

NA

15

INDUSTRIAL SWITCHES


14

CONVEYOR COMPONENTS


687-865 3-Hole Flange 19mm MPN: 300615

687-944 2-Hole Flange 25.4mm MPN: 100615

Alwayse Flange Fitting Ball Transfer Unit• Low friction movement of loads• 3-5% of load force required to start motion• 2% of load force required to maintain motion

NA

331-5759 Bolt, 25.4mm MPN: 7128

331-5765 Bolt 38.1mm MPN: 7153

Alwayse Bolt Fitting Ball Transfer Units• Pattern Heviload 1• Bolt fixing• Two spanner flats for

fixing and removing

NA

NA

223-5517 20 x 100mm MPN: 11AYS20C03

223-5539 20 x 300mm MPN: 11AYS20C03

223-5545 20 x 350mm MPN: 11AYS20C03

223-5573 20 x 450mm MPN: 11AYS20C03

Interroll PVC Round Spring Loaded Conveyor Roller• Round spindles• Stainless steel roller bearings and springs• Spindle material colour coded

(steel - yellow end caps; stainless steel - grey end caps)

665-7255 Dia 40 x L225 MPN: 3 842 525 737

665-7264 Dia 40 x L325 MPN: 3 842 525 738

665-7270 Dia 40 x L225 MPN: 3 842 525 740

Bosch Rexroth Steel Round Conveyor Roller• Roller diameter 40mm and

spindle diameter 8mm• Can be used with roller

carrier or roller mounts• Steel rollers combined with

conductive conveyor track components are suitable for use in ESD-conductive systems

NA

408-558 2V, pitch 75mm MPN: 2PJ282

Hutchinson Poly V Belts• Style Poly 2V• Can be used with EC200 Poly V motorised

rollers and 3500 slave rollers• Only one belt is needed up to 600kW

NA

352-0743 2 row steel balls MPN: DA8/1R/D

352-0759 2 row SS40 balls MPN: DA8/2Y/D

BNL Acetal Skate Wheels• Wheel Diameter: 48.5mm • Wheel Width: 15.8mm • Load Capacity: 25kg

NA

339-291 10 A, 0°C to +150°C MPN: 2455R 82-196 L40C

339-308 15 A, 0°C to +150°C MPN: 2455R 82-195 L70C

339-314 10 A, 0°C to +150°C MPN: 2455R 82-191 L100C

Honeywell Bi-Metallic Thermostat• Phenolic body with stainless steel end cap.• ¼in tab termination• Contacts are rated to 250 Vac

10A with a maximum contact resistance of 50 mΩ

NA

818-429 3-pole IP65 switch disconnector, 25A Ie MPN: P1-25/EA/SVB




Eaton Panel Door Mounted Switch Disconnector• Padlockable in OFF position, up to 3 padlocks

and non-locking versions• Rating up to IP65• 2 and 3 pole versions have built in

neutral and earth connections

NA

360-8427 NO+NC M20 MPN: ZCKJ1H29

360-8455 NO+NC Pg13 MPN: ZCKJ1

Telemecanique Standard Limit Switch Body / LED• Snap action contacts with

positive opening operation• Operating temperature

range: -25°C to +70°C• IP66• Robust metal body

NA

257-3601 20A Ie MPN: VCCF01

257-3617 25A Ie MPN: VCCF0

257-3623 32A Ie MPN: VCCF1

Schneider Base Mounting Switch Disconnectors• Suitable for main• 690V nominal voltage• IP55

NA

NA

357-7840 SPST 16 A, +20°C to +500°C MPN: 602021/0005-046-000-50-1000-20-10-00-00-000-00-8

Jumo Temperature Limiter Thermostat• Temperature ranges from 0 to 500°C• 1 x SPST switching contact• Switching differential 2.5% (4% for RS stock No. 357-7840)

466-138 63A 3P Panel Mount




RS Pro Isolator Switch• All switch ratings at AC22• RoHS compliant• Maximum panel thickness: 3mm

NA

16

RS PRO IN PRODUCTION LINES


466-2236 24V 0-10V/0-10V

466-2264 24Vdc 4-20mA/4-20mA

466-2393 115/230V 4-20mA/4-20mA

RS Pro Isolating Signal Converter• 24Vdc supply• Fully isolated – Input/Supply/Output• Signals conditioned before being

fed through opto-isolating circuit• Red LED power ON indicator

NA

121-6849 MS32-1, 6 Motor Protection Switch

121-6850 MS32-2, 5 Motor Protection Switch

121-6851 MS32, 4 Motor Protection Switch

RS Pro Motor Protection Switch• 35mm DIN Rail• Vertical or Horizontal mount• Thermal and Magnetic release

NA

235-6204 S/steel horizontal mount float switch, 50W

312-7164 S/steel vertical mount float switch, 50W

RS Pro Vertical Float Switch• Horizontal mount with right angled stem• SPST output• Internal vessel mounting

NA

763-7909 24V Red

763-7918 24V Green

763-7949 230V Green

RS Pro LED Indicators• Brighter than standard incandescent bulbs• Very low power consumption• Operating temperature range: -25°C to 55°C

NA

239-6763 Rope kit 2 for safety switches, 10m

RS Pro Rope Kits for All Rope Pull Switches• Accessory Type: Rope Pull Kit • For Use With: All Rope Pull Switches • Size: 10m • Grab Wire Clamp Type: Collar

NA

NA

285-920 44°C to 62°C

285-936 65°C to 93°C

285-942 99°C to 127°C

285-958 135°C to 160°C

RS Pro Temperature Sensitive Label• Minimum Temperature Sensitivity: 44°C • Maximum Temperature Sensitivity: 62°C • Number of Temperature Levels: 6 • Orientation: Horizontal

17

Benefits come from using products which are designed to be ‘smarter’ and have additional intelligence or ability to communicate built into them. Other products embrace new materials and designs which provide a longer working life in the same application. Whatever the type of environment you are maintaining there are opportunities to consider new products or solutions to improve the way you maintain, manage your energy and improve the working life of your building.

Work smarter, not harderMost of us will have heard or even used this phrase but now, more so than ever, it is possible to reduce reactive maintenance and overall maintenance costs by implementing products with ‘smart’ capabilities or changing your approach to maintenance – truly working smarter.

Get connected and know more• Embrace IOT - For building owners, the IoT will dramatically reduce operational and maintenance costs because of its’ ability

to collect and support analysis of previously unattainable data. Sensors placed on building equipment will monitor operation and automatically schedule maintenance tasks based on usage rather than time-based intervals. This makes truly predictive maintenance a reality for many, and it saves costs as reactive maintenance is 3 to 9 times more costly than scheduled.

• Release trapped data – Many buildings already use BMS, lighting control systems and energy sub-metering to help control and monitor day-to-day operation. Unfortunately this data is often trapped and can only be accessed locally inside a control or distribution panel. Using data gateways, serial to Ethernet access points and other devices which help release legacy data onto Ethernet can allow centralised monitoring of large complex buildings to aid operational teams in running the building more effectively.

Longer life means less maintenance• Friction is the enemy – Wear is a function of friction, so by reducing friction you have the dual benefit

of reducing wear and wasted energy. One solution is to use low friction bearings, such as the E2 series from SKF which reduce the friction moment by 30% compared to standard bearings extending operational life. Another option is to consider different bearing or bush materials such as Drylin® from Igus, which offers a lubrication-free, corrosion resistant solution for dirty or wet environments.

• Make the switch - LED lighting technology is no longer new, but continues to improve and drop in price with every passing year. The advantages in commercial and industrial buildings are two-fold; energy saving and reduced maintenance. With certain areas of lighting such as high bay, exterior security, and lighting in production environments often challenging to access, moving to a lighting technology which lasts up to 10x longer than florescent or metal halide saves valuable maintenance and downtime.

A healthy building is a happy building• Hot under the collar – Temperature in the work environment is one of the most often complained

about topics. Many heating and ventilation systems are controlled by out-dated bi-metallic switches with no intelligence and even less accuracy. There are now options to use intelligent thermostats which can both control & learn the optimum temperature, and wireless IoT connected temperature sensors which can be quickly installed to obtain accurate temperature data on an environment.

• Clear the air – Air quality within the building can sometimes be an area which is overlooked.However it is often just as important as temperature for a comfortable, healthy and productive working environment. There are now inexpensive handheld devices which can quickly monitor air quality - including particulates and CO2 levels – indicating that ventilation is may be insufficient and action needs to be taken.

NA

19

TOOL KITS


18

TOOL KITS


734-8889 94pc Mechanics Tool Kit

RS Pro 94 Piece Mechanics Tool Kit• Large tool kit for automotive

work comprising of a comprehensive socket and bit, spanner and precision screwdriver sets

• Chrome Vanadium construction with Chrome Molybdenum Steel sockets

NA

829-6568 78pc ¼" Dr & ½" socket set

RS Pro Socket & Tool Set• ½in & ¼in socket components• Chrome Vanadium steel construction

NA

300-7464 HSS tap & die set,¼-½ UNC

RS Pro Workshop Range Tap & Die Sets• HSS set with bar type wrench

and ratchet wrench for small tap size

• Metal storage cases with hardwood partition trays

• Sets available for metric, UNC & UNF threads

NA

388-3690 26 piece metric combination wrench set

RS Pro Combination Spanner Set• Manufactured from high-quality,

chrome-vanadium steel • Hardened and tempered• General purpose, twin ended

spanner set

NA

NA

487-1389 Type G - British 3-pin, 230V ac

RS Pro RC230 Rotary Tool Kit• Kit Type: Rotary Tool Kit • Chuck Type: Collet • Speed: 8,000 → 25,000rpm

734-8885 88pc ½in. Socket & VDE/1000

RS Pro 88 Piece VDE Electricians Tool Kit• Ergonomic multi-component handles• Optimum balance of

torque and control• High quality

NA

NA

707-3487 Type G - British 3-pin 65 Accessory MPN: F0134000JR

Dremel 4000 Rotary Tool• Dremel 4000• 65 high quality Dremel accessories in Mini Accessory Case

(including EZ SpeedClic starter set)• Flexshaft attachment

612-9573 24 piece HSS Milling set

RS Pro RC9004 HSS Carving & Milling Kit• High Speed Steel mini carving and milling burrs• Shafts: up to 3.2mm• Includes various shapes: round, cone, taper and cylinder

732-4738 40 piece Bearing fitting tool kit MPN: TMFT 36

SKF Bearing Fitting Tool Kit TMFT series• Facilitates correct mounting on shaft,

housing and blind applications• The diameter of the

impact ring fits the inner and outer diameter of the bearing

• Small diameter of the impact area on top of the sleeve allows effective transmission of mounting force

NA

NA

890-3326 Type G - British 3-pin (with 2 x 2.0Ah batteries)

MPN: F.013.820.0JK

Dremel 8200 Cordless Rotary Tool• Dremel 8200• 20 high quality

Dremel accessories• 2x 10.8V 2.0 Ah Li-Ion

Battery pack (875)

499-9134 400 Piece

RS Pro PMC9400 Accessory KitA comprehensive set of mini rotary tool accessories for drilling, cutting, grinding, sanding, shaping, engraving, polishing, cleaning and de-rusting.

NA

NA

612-9595 60 piece cut/grinding set

RS Pro RC9005 Cutting & Grinding Set• Shafts: 2.35mm and 3.2mm diameter• Includes grinding stones and wheels,

reinforced cutting discs, carborundum slitting discs, mini steel circular saw blades and diamond cutting blades

21

CONNECTORS


20

CASTORS & WHEELS


227-0419 Medium duty fixed castor, 80mm 150kg

MPN: 17177

227-0425 Medium duty SW castor w/TP, 80mm 150kg

MPN: 17127

227-0447 Medium duty SW castor w/TP&BR, 80mm 150kg

MPN: 17127 FR

LAG Fixed Castor Wheels• Plate fixing castor made from

hygienic materials• Resistant to corrosion,

abrasion and shock• Easy running under heavy loads

NA

694-8721 Steel hub fixed castor, 80mm 60kg

MPN: 12454

694-8753 Steel hub swivel castor braked, 80mm 60kg

MPN: 12254 FR

694-8759 Steel hub swivel castor, 200mm 230kg

MPN: 12286

LAG Fixed Castor Wheel• Black, non-marking rubber tyre• Electro-zinc plated white

passivate pressed steel frame• RoHS compliant

NA

837-1322 Castor Wheel, 110mm diameter MPN: 39018CC

848-9899 Castor Wheel, 150mm Dia, Ball Bearing

MPN: 35020

LAG Aluminium Grey Castor Wheels• Aluminium industrial castor wheels

fitted with ball bearing hubs• Suitable for high temperature

applications and heavy loads

NA

449-0126 L/duty cap bolt fix SW castor w/BR, 100mm

MPN: 2477PJO100P30CHC10X90

449-0132 L/duty cap bolt fix SW castor, 125mm, 100kg


449-0148 L/duty cap bolt fix SW castor w/BR, 125mm


Tente Swivel Castor• Swivels on 2 rows of hardened steel balls

(greased), with head seal• Super-elastic tyre gives

quiet operation• Roller hub bearing

NA

NA

454-1139 Blue elastic tyre SWcastor w/TP&BR, 100mm, 150kg

MPN: 902197

Industrial Castor, Blue & Grey Elastic, Series 3470• Swivels on 2 rows of hardened steel balls

(greased), with head seal• Super-elastic tyre gives quiet operation• Roller hub bearing

196-4933 FX castor, 75mm 90kg

196-4999 SWcastor, 100mm, 150kg

196-5009 FXcastor, 100mm, 150kg

196-5015 SW castor w/BR, 100mm

RS Pro Super Elastic Blue Rubber Tyre Castor• Zinc plated body• Blue, non-marking tyre• Medium Duty Range with

bright zinc finish

NA

458-689 8mm Pin Length, 1.3mm Pin Diameter, White

458-746 0.5mm2 wire

458-718 1.5mm2 wire

458-774 1.5mm2

RS Pro DIN Replacement Ferrules• Insulation: Insulated • Insulation Material: Nylon • Number of Entries: 1

NA

534-216 Red M4 crimp ring terminal, 0.5-1.5mm2

534-581 Blue M4 crimp ring terminal, 1.5-2.5mm2

534-575 Blue M5 crimp ring terminal, 1.5-2.5mm2

534-200 Red M5 crimp ring terminal, 1.5-2.5mm2

RS Pro Insulated Crimp Ring Terminals• Wire sizes:• Red 0.5-1.5mm²• Blue 1.5-2.5mm²• Yellow 4-6mm²

NA

NA

533-279 Minimum 0.5mm², Maximum 6.0mm²

RS Pro Ratchet Crimping Tool• Non-slip main handle and low friction moving handle

ensure a comfortable hand grip• Provides two-hand grip in the final phase of

crimping, increasing comfort and productivity• Full cycle crimp

624-1285 Minimum 10mm², Maximum 185mm²

RS Pro Hydraulic Crimper• 180° rotational head• Supplied with Die Sets• Built-in safety valve

NA

707-4881 6-IN-1, 190mm, Alloy Steel

RS Pro Supercutters• Shear M3.5 patress screws• Precision cutting edges• Strip 1.5mm cable• Strip 2.5mm cable

NA

464-9744 12 Way/Pole, Screw Down Terminals, 2.5 mm² Through Hole

RS Pro Nylon 6.6 Terminal Block With Wire Protection Leaf• 12-way terminal blocks• Natural Colour• Screw Terminals

NA

23

ENERGY EFFICIENCY RANGE


22

FASTENERS & FIXINGS


529-911 Steel grub screw, M3x6mm

RS Pro Metric Thread Socket Set Screws• Thread Size: M3 • Length: 6mm • Thread Pitch: 0.5mm

NA

483-0041 M2.5x6mm

RS Pro Nickel Plated Brass Screws• Length: 6mm• Thread Size Metric: M2.5 • Thread Pitch: 0.45

NA

797-6213 A2 S/Steel cross pan head screw, M5x10mm

RS Pro Plain Stainless Screws• Pan head screws with cross recess, metric thread• A2 grade 18/8 stainless steel (Type 304 S15)• Can be used up to 800 °C

NA

428-638 Stainless steel crinkle washer, M3

RS Pro Anti-Vibration Washer• For Screw/Bolt Size: M3 • Washer Type: Crinkle • Inside Diameter: 3.26mm

NA

767-854 A4 stainless steel self locking nut, M10

RS Pro Nylon Insert Lock Nut• Self-locking nuts with glass-filled nylon

inserts. These are designed to remain secure despite conditions of severe vibration.

• Self locking nuts, metric thread• To DIN985

NA

222-402 Brass tapped hole hex spacer, M3x12mm

RS Pro Nonn-Insulating Spacers• Metric threaded non-insulating spacers• Nickel plated brass• Body Length: 12mm

NA

786-9180 LED 4W gold lamp G50 E27 3000k

RS Essentials G50 E27 GLS Lamps• 4W LED lamp, equivalent to 25W GLS replacement• E27 base• Input voltage: 220-240V

NA

841-1388 LIGHTIFY CLASSIC A60 RGBW MPN: 4052899926097

Osram LIGHTIFY Classic A60, RGBW, Wireless Controlled LED Lamp• Convenient, simple operation

via smart phone or tablet PC• Complete LIGHTIFY function• Easy to install

NA

786-9077 LED 6W GLS lamp P55 B22 3000k

RS Essentials P55 B22 GLS Lamps• 5.5W LED lamp as 35W

GLS replacement• Base: B22• Input voltage: 100-240V

NA

123-5858 ADV CL A 100 14, 5W/827 E27 FR MPN: 4052899960909

Ledvance Parathom Advanced Classic A E27• Short payback period thanks

to low energy consumption and maintenance costs

• Energy-saving lighting solution thanks to automatic switch off at daylight

• Safety through automatic switch-on at darkness

NA

123-5920 Retrofit CL B 40, 4W/827 E14 GL FR MPN: 4052899959194

Ledvance Parathom Retrofit Classic B E14• Professional LED lamps for line voltage• Beam angle: up to 300°• Not dimmable

NA

786-9137 5W(40W) 6500K, Day White

RS Pro Essentials LED Retrofit MR16 GU5.3• 5W LED lamp as 40W MR16 replacement• Base: GU5.3• Input voltage: AC/DC 12V

NA

25



24



500-3666 MOTOR FAN Q MPN: M4Q45-CA03-75.V230X34

Q motor fansThese axial fans comprise a helix with 5 blades with a diameter ranging from 154 to 300 mm depending on model and an IP42 protection AC motor (230 V - 50 Hz)

NA

328-9098 Fan speed controller 230 VAC 5 AMP MPN: REE 50

Stepless Electronic Fan Speed Controllers• General purpose high-power

fan speed controller• Separate on/off switch and

variable speed control• Internal adjustable preset

for minimum speed (factory pre-set to 20%)

NA

376-1512 Speed controller for in-line duct fan MPN: 21867AW

Centrifugal In-Line Duct Fan• Compact design for use in confined spaces• Outlet guide vanes straighten air flow• Maintenance free motor, totally

enclosed with thermal protection

NA

733-5369 Remote control MPN: REB - 1 R

Remote Control for Window or Wall Standard Extract Fans• Remote control to manage speed

and airflow direction for the standard window or wall extract fans

• Maximum Current: 1A• Supply Voltage: 220V to 240V

NA

NA

667-0406 DC fan controller, 12V relay alarm MPN: CDC122055UR-R

DC Fan Controllers• Speed control for two or three wire

ebm-papst DC compact fans• 71.1 x 72.4 x 19.6 (max height) mm,

with 4 holes each 3.5mm diameter• Selectable control temperature range:

+20°C to +40°C / +35°C to +55°C

250-864 DC Radial blower 12Vdc, 24m³/H MPN: RV40-18/12H

ebm-papst DC Radial Blowers• DC radial blower with electronically

commutated external rotor motor• Electronic protection against reverse

polarity, locked rotor and overloading• Radial direction of flow

NA

146-2607 T6-600 Electrical Tester, 600V MPN: T6-600

146-2605 T6-1000 Electrical Tester, 1000V MPN: T6-1000

Fluke T6-600 Electrical Tester• FieldSense technology• Easy to read display with backlight• HOLD button

temporarily freezes the reading for easy viewing

NA

123-4543 Fluke 369 Leakage Current Clamp Meter

MPN: FLUKE-369

123-4545 Fluke 369 FC Leakage Current Clamp Meter

MPN: FLUKE-369 FC

Fluke 360 Series True-RMS Clamp Meters• Forward facing work light,

plus backlit display• Highest resolution of 1 μA• True RMS for accurate measurements

of complex signals

NA

123-1938 10A ac 600V ac, 10A dc 600V dc

RS Pro Handheld Digital Multimeter• 2000 Counts LCD backlit display

with function indication• Voltage: 600 V ac/dc• Current: 10 A ac/dc

NA

123-3222 RS Pro ICM136R Clampmeter, 600A

RS Pro ICM136R True RMS Clampmeter• Backlit 4000 Count LCD display

with analogue bargraph• True RMS Reading on ac mode• 600A ac/dc current measurement

NA

765-3658 Fluke 323 400A AC RMS Clamp meter MPN: FLUKE 323

765-3660 Fluke 325 40/400A AC/DC RMS Clamp meter MPN: FLUKE 325

Fluke 320 Series True RMS Clampmeters• True RMS AC voltage and current for accurate

measurements on non-linear signals • The 325 also supports

DC current measurement and min / max

NA

669-3493 FLUKE 773, mA PROCESS LOOP CLAMP METER

MPN: Fluke 773

772 & 773 Milliamp Process Clamp Meters• Best in class 0.2% accuracy• 0.01 mA resolution and sensitivity• Measure 4 to 20 mA signals

without “breaking the loop”

NA

27



26



136-8286 FLIR ONE PRO Android micro-USB Connector

MPN: 435-0011-03

136-8285 FLIR ONE PRO for Android USB-C Connector

MPN: 435-0007-03

136-8284 FLIR ONE PRO for iOS Lightning Connector

MPN: 435-0006-03

FLIR ONE® Pro Android micro-USB Connector• MSX™ (adds visible spectrum detail to

thermal images and enhances resolution) • Rugged Design • OneFit™ Adjustable Connector

NA

910-7068 Cold chain data logger for fridge MPN: EL-CC-1-001

910-7062 Cold chain data logger for freezer MPN: EL-CC-1-002

910-7071 Cold chain data logger for ripening MPN: EL-CC-1-003

Lascar EL-CC-1 Cold Chain Data Loggers• No set-up required - start logging

with one press of a button• Pre-configured with appropriate

sample rates and alarm thresholds for each application

• Measurement range: -30°C to +60°C

NA

NA

123-2217 IR Thermometer and Socket MPN: TES-1327K

RS Pro Remote Temperature Measurement (Non Contact) Infrared/K Thermometer• IR mode measuring range:

-35°C to +500°C• Type K measuring range:

-150°C to +1350°C• Pocket sized pistol grip

848-1331 TG165 Imaging IR thermometer MPN: TG165

FLIR TG165 Imaging IR Thermometer• Frame Rate: 9Hz• Image Resolution: 4,800 pixels

(80 x 60)• Spot size ratio: 24:1

NA

848-1371 E8 Thermal Imaging Camera MPN: FLIR E8

FLIR E8 Infrared Thermal Imaging Camera• Display: 3in color LCD• IR resolution: 320 × 240 pixels• Field of view (FOV): 45° × 34°

NA

866-8124 C2 pocket-sized thermal imaging camera MPN: 72001-0101

FLIR C2 Compact Thermal Imaging System• Easily affordable• Light, slim profile• Contains a built-in LED spotlight

that can be used as a flashlight and for photo illumination

NA

124-1959 RS Pro IPM242 Power Clampmeter, 600A MPN: IPM242

RS Pro IPM242 Power Clampmeter• 10,000 Count digital display• Active display backlight and

analogue bargraph• VoltSense (Non-contact

Voltage measurement)

NA

437-6159 MAVOWATT 4 INSTRUMENT MPN: GTM3033000R0001

Power Meter Mavowatt 4• Direct power measurement for direct

current and active power measurements for single-phase AC current and balanced three-phase rotating current

• Reactive power detection• Also measures mesh voltage(s)

NA

123-2207 IPM6200

RS Pro IPM 6200 Power Quality Analyser• Power quality analysis of single

and balanced 3-phase systems• Graphical display of voltage

and current waveforms• 128 x 64 Dot matrix LCD with backlight

NA

144-8195 Power Analyzer, up to 600V w/GPIB MPN: HMC8015-G

Rohde & Schwarz Power Analyser HMC8015• Clear display of all measured parameters• Measurement accuracy• Everyday measurement functions

NA

123-2244 Power Quality Tester MPN: TES-3600A

RS Pro IPM3600 Power Quality Tester• Absolute Maximum Current

Measurement: 999.9A• Absolute Maximum Power

Measurement: 999.9kW• Number of Phases: 3

NA

550-243 POWER /QUALITY ANALYSER CA8230 MPN: P01160630B

C.A 8220 and C.A 8230 Power Analysers• Single-phase or balanced three-

phase power analyser designed for tradesmen and installers in the public or private construction industry and in maintenance departments

NA

Maintenance MattersSupporting the fast-paced world of a maintenance engineer

www.rs-online.com

Take the trouble out of troubleshooting.

¢ Automatic CT recognition

¢ Automatic connection verification

¢ On-board data analysis

¢ SD card and USB stick support

¢ 1000 V ac and dc range

¢ Scope and DMM modes

¢ CATIV @ 600 V

¢ IEC61000-4-30 Class A compliant

MPQ1000Power Quality Analyzer

The Megger MPQ1000 Power Quality Analyzer is Class A compliant and rated CAT IV at 600V. It can be used for a wide variety of applications including substation monitoring, equipment and breaker tripping, load studies and balancing as well as for switchgear and component failure.

Some of its features include:

Power on with Megger.

Take the trouble out of troubleshooting. - RS Components...accordance with DIN 47100 • Cores...

Documents

Transcript of Take the trouble out of troubleshooting. - RS Components...accordance with DIN 47100 • Cores...