Platinum QualityThe Taipan ‘Platinum’ status is reserved for only the

very best abrasive products, offering unbeatableperformance and wear life.

Extra Fine... EXTREMELY FAST!The extra-fine cutting disc Razor-Cut AS 60with a thickness of 1.0mm (.035’) or1.2mm (.045”) is the right choice for cuttingthin-walled profiles and pipes, thin sheetsand ropes. The extra-smooth cutting disc ischaracterized by its fast and smooth cutting

with low contact pressure.

Extra Fine... EXTREMELY FAST!Look for our RED LIFETIME-PLUS freshness seal!

• Discs come packaged in 25s in convenient, stackable, durable steel tins

• Sizes 4-1/2” and 5” discs only

• Over 30% * more service-life (number of cuts)

• Stops the natural aging process of synthetic resin-bonded discs

• Keeps cutting discs fresh until the pack is opened for the first time

TO-6550 5” x .045” x 7/8” Depressed 12,250 1-TCPRD125X12A 25

PART# SIZE IN. TYPE RPM ARTICLE# QTY

Aluminum Cutting Discs • Razor Cut • Platinum

TP-6002 4-1/2” x .035” x 7/8” Flat 13,280 1-TCPRF115X10 25

TP-6004 5” x .035” x 7/8” Flat 12,200 1-TCPRF125X10 25

TP-6006 4-1/2” x .045” x 7/8” Flat 13,280 1-TCPRF115X12 25

TP-6008 5” x .045” x 7/8” Flat 12,200 1-TCPRF125X12 25

TP-6010 6” x .045” x 7/8” Flat 10,200 1-TCPRF150X12 25

TP-6012 4-1/2” x .045” x 7/8” Depressed 13,280 1-TCPRD115X12 25

TP-6014 5” x .045”x 7/8” Depressed 12,200 1-TCPRD125X12 25

TP-6016 6” x .045” x 7/8” Depressed 10,200 1-TCPRD150X12 25

TP-6018 7” x .062” x 7/8” Depressed 8,600 1-TCPRD180X12 25

PART# SIZE IN. TYPE RPM ARTICLE# QTY

Cutting Discs • Razor Cut • PlatinumAS60-T-INOX

ALUMINUMSTAINLESSSTEEL

ALUMINUM

Features: This best-seller has a brilliant price/performance ratio and has proven itselftime and again. The Original line shows best results on every angle grinder. Professionaluse in every application demands the right disc, thereforeabrasive grits and bonds exactly match the material.This increases performance and minimizesworking time.

Notching/Grinding Discs Original A60-QBF

TO-6100 4” x 3/32” x 5/8” 15,300 25TO-6102 4-1/2” x 3/32” x 7/8” 13,300 25TO-6104 5” x 3/32” x 7/8” 12,250 25TO-6106 6” x 3/32” x 7/8” 10,200 25TO-6108 7” x 3/32” x 7/8” 8,500 25TO-6110 4” x 1/8” x 5/8” 15,300 25TO-6112 4-1/2” x 1/8” x 7/8” 13,300 25TO-6114 5” x 1/8” x 7/8” 12,250 25TO-6116 6” x 1/8” x 7/8” 10,200 25TO-6118 7” x 1/8” x 7/8” 8,500 25TO-6120 4” x 1/4” x 5/8” 15,300 25TO-6122 4-1/2” x 1/4” x 7/8” 13,300 25TO-6124 5” x 1/4” x 7/8” 12,250 25TO-6126 6” x 1/4” x 7/8” 10,200 25TO-6128 7” x 1/4” x 7/8” 8,500 25

PART# SIZE IN. RPM QTY

STAINLESSSTEEL

• Resin bonded

• Reinforced with glass fibre

• Good lifetime

• Good removal rate

• Good for steel and stainless steel

• Contaminant-free

Original Quality:The Taipan Original series is abase range of industrialabrasives delivering safe,reliable, quality and goodvalue. Our everydayworkhorse product line.

• Flexible grinding

• Consistant finish

• Cooler grinding

• Longer lasting Ceramic material

• Trimable backing means longer life and product usage

TP-5200 5” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #40 12,250 10

TP-5202 5” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #60 12,250 10

TP-5204 5” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #80 12,250 10

TP-5206 5” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #120 12,250 10

TP-5208 6” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #40 10,200 10

TP-5210 6” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #60 10,200 10

TP-5212 6” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #80 10,200 10

TP-5214 6” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #120 10,200 10

TP-5216 7” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #40 8,500 10

TP-5218 7” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #60 8,500 10

TP-5220 7” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #80 8,500 10

TP-5222 7” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #120 8,500 10

PART# SIZE IN. DESCRIPTION GRIT RPM QTY

Ceramic Razor Flap Discs • PlatinumSTEEL STAINLESS ALUMINUM

• Easy and fast mounting of disc by special made 5/8 -11center • Threaded plastic hub –5/8-11” • The best quality paper material

• Easy and fast mounting of disc by special made 5/8 -11center

• Comfortable application due to flexible structure

• 2 different process applications using the same disc

• 2 different grit sizes on the same disc

• Multi-choice possibility of different grits on the same disc

• Economical: lower price than buying two separate discs

• Various operation abilities on different work pieces and materials because of the various combinations possible

Visit our website to see a videodemonstration of the

EXCLUSIVE TwinFlap Disc!

STEEL STAINLESS ALUMINUM

Twin-Flap Discs • Platinum

TP-5830 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/40 10 TP-5832 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/60 10TP-5834 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/80 10TP-5836 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/120 10TP-5838 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 60/60 10TP-5840 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 60/80 10TP-5844 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 80/80 10TP-5846 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 80/120 10TP-5848 4-1/2” x 5/8”-11 QUICKSPIN - ZIRCONIA 120/120 10TP-5850 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/40 10TP-5852 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/60 10TP-5854 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/80 10TP-5856 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 40/120 10TP-5858 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 60/60 10TP-5860 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 60/80 10TP-5862 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 60/120 10TP-5864 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 80/80 10TP-5866 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 80/120 10TP-5868 5” x 5/8”-11 QUICKSPIN - ZIRCONIA 120/120 10

PART# SIZE IN. TYPE GRIT QTY

Features:

These stringer bead wire wheelbrushes for angle grinders are

made from quality wirethat is knotted, and

each tuft ispreciselypositioned andset for perfectbalance andvibration-freeoperation. Improved construction

ensures maximum operator safety andfast material removal.

• Fast removal

• Perfect balance

• Vibration-free

• Best quality wire

• Ideal for pipeline weld/bead cleaning

TO-3602 Stringer Bead 5” 5/8-11” Thread Twist-Knot Stainless Steel 12,500 10TO-3604 Stringer Bead 6” 5/8-11” Thread Twist-Knot Stainless Steel 12,500 10

PART# DESCRIPTION SIZE TYPE RPM QTYStainless Steel String Bead Brushes - 1/4” Face Width

STAINLESS

TO-3002 Stringer Bead 5” - 1/4” Face 5/8-11”Thread Twist-Knot Steel 12,500 10TO-3004 Stringer Bead 6” - 1/4” Face 5/8-11” Thread Twist-Knot Steel 12,500 10TO-3012 Knot Wheel 6” - 1/2” Face HD 5/8-11” Thread Twist-Knot Steel 12,500 10TO-3008 Knot Wheel 5” - 1/2” Face 5/8-11” Thread Twist-Knot Steel 12,500 10 TO-3006 Knot Wheel 6” - 1/2” Face 5/8-11” Thread Twist-Knot Steel 12,500 10TO-3010 Knot Wheel 6”- 7/8” - 1/2” Face HD 5/8-11” Thread Twist-Knot Steel 12,500 10TO-3024 Cup Brush 2 - 3/4” 5/8-11” Thread Crimped Brass-Coated Steel 14,000 10TO-3022 Cup Brush 2 - 3/4” 5/8-11” Thread Twist-Knot Steel 14,000 10TO-3020 Cup Brush 3 - 1/2” 5/8-11” Thread Twist-Knot Steel 9,000 10TO-3018 Cup Brush 5” 5/8-11” Thread Twist-Knot Steel 9,000 10TO-3016 Cup Brush 6” 5/8-11” Thread Twist-Knot Steel 6,000 10

PART# DESCRIPTION SIZE TYPE RPM QTY

Stringer Bead Brushes, Knot Twist Wheels & Cup BrushesSTEEL

TO-3028 Bevel/Saucer 4-1/2” - 45º Working Angle 5/8-11” Thread Twist-Knot Steel 12,500 1TO-3614 Bevel/Saucer 4-1/2” - 45º Working Angle 5/8-11” Thread Twist-Knot Stainless Steel 12,500 1TO-3014 Knot End 1-1/8” 1/4” Shaft Twist-Knot Steel 20,000 1TO-3606 Knot End 1-1/8” 1/4” Shaft Twist-Knot Stainless Steel 20,000 1

PART# DESCRIPTION SIZE TYPE RPM QTY

Bevel/Saucer & Knot End Brushes

TO-3206 4-Row Yellow Handle Carbon Steel - Straight 0.35mm 12 120TO-3208 4-Row Yellow Handle Stainless Steel - Straight 0.35mm 12 120

PART# ROW HANDLE COLOUR WIRE TYPEHand Brushes

CARTONQTY

BOXQTY

STAINLESSSTEEL

STAINLESSSTEEL

Date: __________________ P.O. #: ___________________

Distributor Sales Contact: ____________________________

SOLD TO: SHIP TO:

CUSTOMER CONTACT: DELIVERY BY:

TEL: FAX:

ETA:

TERMS:

QTY PART# DESCRIPTION UNIT AMOUNT

SUBTOTALS&HSUBTOTALG.S.T.TOTAL

SHIPPING INFO:

THANK YOU FOR YOUR ORDER!

TO-8058 DRILL BIT - “Original” - HSS - M2 HIGH SPEED STEEL - 29 PIECE SET - 1/16” thru 1/2” $119.00

PLEASE QUOTE PROMO CODE TC1301