Tài liệu Hướng dẫn giả lập ASA trên GNS3
-
Upload
ly-hoang-dong -
Category
Documents
-
view
399 -
download
11
Transcript of Tài liệu Hướng dẫn giả lập ASA trên GNS3
12/01/2014 Tài liệu Hướng dẫn giả lập ASA trên GNS3
forum.bkacad.com/showthread.php?46290-Hướng-dẫn-giả-lập-ASA-trên-GNS3 1/5
Diễn đàn Mạng máy tính CCNA Security [TÀI LIỆU] Hướng dẫn giả lập ASA trên GNS3
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
Chủ đề: Hướng dẫn giả lập ASA trên GNS3
Chào mừng đến với Diễn đàn Học Viện CNTT Bách Khoa. Đăng Ký Login: Tên tài khoản Mật Khẩu Ghi nhớ?
Có gì mới?
Bài gửi hôm nay Hỏi - Đáp Lịch Cộng đồng Thiết lập nhanh Liên kết Nhanh Tìm kiếm nâng cao
Kết quả 1 đến 5 của 5
Công cụ Chủ đề Tìm Chủ đề Hiển thị
31-07-2012, 10:55 AM
Hướng dẫn giả lập ASA trên GNS3
Link download GNS3 : http://www.gns3.net/dynamips/Link download ASA : http://www.mediafire.com/?vpbmfxfr36chv0r
#1
Ngày tham gia:
Bài viết:
Sep 2011
16
ChuongNguyen
Instructor
Đã có chứng chỉ tin học văn phòng...
Trả lời kèm Trích dẫn
31-07-2012, 07:43 PM
Step 1 : Vào GNS-> Preference -> Test qemu : Chọn đường dẫn hợp lý -> test qemuwrapper.exe +qemu.exe + qemu-img.exe Successfully là okie
ce3fa0e5c935c3405f538ccc75b8f6bc_47721830.step1.jpg
#2
Ngày tham gia:
Bài viết:
Sep 2011
16
ChuongNguyen
Instructor
Lần sửa cuối bởi ChuongNguyen, ngày 01-08-2012 lúc 01:43 AM.
Đã có chứng chỉ tin học văn phòng...
Trả lời kèm Trích dẫn
Diễn đàn
12/01/2014 Tài liệu Hướng dẫn giả lập ASA trên GNS3
forum.bkacad.com/showthread.php?46290-Hướng-dẫn-giả-lập-ASA-trên-GNS3 2/5
01-08-2012, 01:57 AM
Step 2 :
Từ menu Qemu rồi vào tab ASA. Lựa chọn đường dẫn cho Initrd và Kernel (link toi phan ASA vua down ve)
#3
Ngày tham gia:
Bài viết:
Sep 2011
16
ChuongNguyen
Instructor
Đã có chứng chỉ tin học văn phòng...
Trả lời kèm Trích dẫn
01-08-2012, 02:03 AM
Step 3 :
Kéo ASA ra màn hình-> start ->giao diện QEMU hiện ra không được tắtTiếp theo Console vào ASA -> hiển thị ra dấu # -> copy đoạn này vào
Kết quả :->
#4
Ngày tham gia:
Bài viết:
Sep 2011
16
ChuongNguyen
Instructor
cd /mnt/disk0/mnt/disk0/lina_monitor
## cd /mnt/disk0# /mnt/disk0/lina_monitor
Processor memory 132849664, Reserved memory: 20971520 (DSOs: 0 + kernel: 20971520)Guest RAM start: 0xd6c00080Guest RAM end: 0xdd400000LINA unit number: 1Guest RAM brk: 0xd6c01000
MKDIR failed No such file or directory for /var/log/Welcome to LINA - ( F1-on-Linux platform ) desktop version!
************************************************** ******************* WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING ** ** This product is for Cisco internal use ONLY!!! ** ** WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING *************************************************** ******************
i2c_read_byte_w_wait() error, slot = 0x4, device = 0xb0, address = 0 byte count = 1. Reason:I2C_SMBUS_UNSUPPORT
Total SSMs found: 0Ignoring PCI card in slot:0 (vendor:0x0 deviceid:0x0)Ignoring PCI card in slot:1 (vendor:0x0 deviceid:0x0)Ignoring PCI card in slot:2 (vendor:0x0 deviceid:0x0)Ignoring PCI card in slot:3 (vendor:0x0 deviceid:0x0)Ignoring PCI card in slot:4 (vendor:0x0 deviceid:0x0)Ignoring PCI card in slot:5 (vendor:0x0 deviceid:0x0)Ignoring PCI card in slot:6 (vendor:0x0 deviceid:0x0)
Total NICs found: 6eth0 mappingInterrupt: 0 Base address:0xc040Memory: f2020000-f2040000ifr.ifr_ifindex 4ioctl (SIOCGIFADDR): Cannot assign requested address
12/01/2014 Tài liệu Hướng dẫn giả lập ASA trên GNS3
forum.bkacad.com/showthread.php?46290-Hướng-dẫn-giả-lập-ASA-trên-GNS3 3/5
le_open: got the fd: 8, name: eth0LINA guest interface 0: Linux host ethdev: eth0linaeth Ethernet at irq 0 MAC: 0000.ab49.da00eth1 mappingInterrupt: 0 Base address:0xc080Memory: f2040000-f2060000ifr.ifr_ifindex 5ioctl (SIOCGIFADDR): Cannot assign requested addressle_open: got the fd: 9, name: eth1LINA guest interface 1: Linux host ethdev: eth1linaeth Ethernet at irq 0 MAC: 0000.abcd.fc01eth2 mappingInterrupt: 0 Base address:0xc0c0Memory: f2060000-f2080000ifr.ifr_ifindex 6ioctl (SIOCGIFADDR): Cannot assign requested addressle_open: got the fd: 10, name: eth2LINA guest interface 2: Linux host ethdev: eth2linaeth Ethernet at irq 0 MAC: 0000.abd0.9502eth3 mappingInterrupt: 0 Base address:0xc100Memory: f2080000-f20a0000ifr.ifr_ifindex 7ioctl (SIOCGIFADDR): Cannot assign requested addressle_open: got the fd: 11, name: eth3LINA guest interface 3: Linux host ethdev: eth3linaeth Ethernet at irq 0 MAC: 0000.abf4.a403eth4 mappingInterrupt: 0 Base address:0xc140Memory: f20a0000-f20c0000ifr.ifr_ifindex 8ioctl (SIOCGIFADDR): Cannot assign requested addressle_open: got the fd: 12, name: eth4LINA guest interface 4: Linux host ethdev: eth4linaeth Ethernet at irq 0 MAC: 0000.ab5f.fb04eth5 mappingInterrupt: 0 Base address:0xc180Memory: f20c0000-f20e0000ifr.ifr_ifindex 9ioctl (SIOCGIFADDR): Cannot assign requested addressle_open: got the fd: 13, name: eth5LINA guest interface 5: Linux host ethdev: eth5linaeth Ethernet at irq 0 MAC: 0000.abbe.2b05
INFO: Unable to read firewall mode from flashWriting default firewall mode (single) to flashWARNING: Unable to write firewall mode to flash, this is normal if flash isnot formatted.--------------------------------------------------------------------------. . | | ||| ||| .|| ||. .|| ||.
. || | |||:.. || | |||:. C i s c o S y s t e m s --------------------------------------------------------------------------
Cisco Adaptive Security Appliance Software Version 8.0(2)
****************************** Warning *******************************This product contains cryptographic features and issubject to United States and local country lawsgoverning, import, export, transfer, and use.Delivery of Cisco cryptographic products does notimply third-party authority to import, export,distribute, or use encryption. Importers, exporters,distributors and users are responsible for compliancewith U.S. and local country laws. By using thisproduct you agree to comply with applicable laws andregulations. If you are unable to comply with U.S.and local laws, return the enclosed items immediately.
A summary of U.S. laws governing Cisco cryptographicproducts may be found at:http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us bysending email to [email protected].******************************* Warning *******************************
Copyright (c) 1996-2007 by Cisco Systems, Inc.
12/01/2014 Tài liệu Hướng dẫn giả lập ASA trên GNS3
forum.bkacad.com/showthread.php?46290-Hướng-dẫn-giả-lập-ASA-trên-GNS3 4/5
« Chủ đề trước | Chủ đề Tiếp theo »
-> vào cấu hình thôi
Restricted Rights Legend
Use, duplication, or disclosure by the Government issubject to restrictions as set forth in subparagraph(c) of the Commercial Computer Software - RestrictedRights clause at FAR sec. 52.227-19 and subparagraph(c) (1) (ii) of the Rights in Technical Data and ComputerSoftware clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.170 West Tasman DriveSan Jose, California 95134-1706
open or write(ffsdev/2/write/32) failedCould not initialize system files in flash.i2c_read_byte_w_suspend() error, slot = 0x4, device = 0xb0, address = 0 byte count = 1. Reason:I2C_SMBUS_UNSUPPORTi2c_read_byte_w_suspend() error, slot = 0x4, device = 0xb0, address = 0 byte count = 1. Reason:I2C_SMBUS_UNSUPPORTType help or '?' for a list of available commands.ciscoasa> ciscoasa> ciscoasa> ciscoasa> enPassword: ciscoasa#
Đã có chứng chỉ tin học văn phòng...
Trả lời kèm Trích dẫn
03-01-2013, 11:14 AM
Đã có ASA version 8.4 rồi nhé :http://www.mediafire.com/?y4yn821fa5d4l3j
Trong ver mới có một số thay đổi về câu lệnh cấu hình, đặc biệt là phần NAT.
#5
Ngày tham gia:
Bài viết:
Sep 2011
16
ChuongNguyen
Instructor
Đã có chứng chỉ tin học văn phòng...
Trả lời kèm Trích dẫn
Chọn nhanh CCNA Security Lên trên
Bạn Không thể gửi Chủ đề mới
Bạn Không thể Gửi trả lời
Bạn Không thể Gửi file đính kèm
Bạn Không thể Sửa bài viết của mình
Quyền viết bài
BB code đang Bật
Smilies đang Bật
[IMG] code đang Bật
[VIDEO] code is Bật
HTML code đang Tắt
Nội quy - Quy định
12/01/2014 Tài liệu Hướng dẫn giả lập ASA trên GNS3
forum.bkacad.com/showthread.php?46290-Hướng-dẫn-giả-lập-ASA-trên-GNS3 5/5
Liên lạc với chúng tôi Hoc Vien CNTT Bach Khoa Lưu trữ Lên trên
Diễn đàn sử dụng vBulletin® Phiên bản 4.1.11. Việt hóa bởi MRCD™
Bản quyền của 2014 vBulletin Solutions, Inc. Tất cả quyền được bảo lưu.
Ban quản trị không chịu trách nhiệm về nội dung do thành viên đăng.
Múi giờ GMT +7. Bây giờ là 05:39 PM.