TAC DuraDrive Product Guide - BARCOL Controls Ltd.barcol.ca/docs/DuraDrive.pdf · MF40-7173 150...
-
Upload
truongphuc -
Category
Documents
-
view
219 -
download
0
Transcript of TAC DuraDrive Product Guide - BARCOL Controls Ltd.barcol.ca/docs/DuraDrive.pdf · MF40-7173 150...
2
TAC DuraDrive Spring-ReturnDirect Coupled ActuatorsTAC OFFERS A COMPLETE LINE OF DIRECT COUPLED ACTUATORS
FOR ALL YOUR SPRING RETURN ACTUATOR NEEDS.
Direct coupled easy to install, spring return TAC DuraDrive actuators are available with torques that range from 30 to 150 lb-in for two position, floating or proportional control.
SPRING RETURN
35 Lb-IN Mx40 SERIES 35 lb-in Mx40-704x series direct coupled standard mounting to ½” shafts with optional mounting to ¾” shafts. NEMA 2, optional built in auxiliary switches, CW or CCW spring return mounting, 3’ cable, accepts ½” conduit connector, two position, floating or proportional control.
60 Lb-IN/133 Lb-IN Mx41-7xxx SERIES60 lb-in/133 lb-in Mx41-7xxx series direct coupled standard mounting to ¾” shafts with optional mounting to 1”. NEMA 2, optional built in auxiliary switches, CW or CCW spring return mounting, 3’ cable, accepts ½” conduit connector, convenient manual override, multiple accessories available, two position, floating or proportional control.
150 Lb-IN Mx40-71xx SERIES150 lb-in Mx40-71xx series direct coupled standard mounting to ½” shafts with optional mounting to 1”. A premier oil immersed gear train actuator for long dependable service with a heavy duty NEMA 4 housing, 3’ cable, accepts ½” conduit connector, CW or CCW spring return mounting.
Value-Driven General Purpose Applications 30 Lb-IN Mx4D SERIES 30 lb-in Mx4D series direct coupled for up to ½” shafts, NEMA 2, 10’ plenum rated cable standard, accepts ½” conduit connector, convenient manual override, two position, floating or proportional control.
High Performance HVAC Applications
Damp and Harsh Environment Applications
SPR
ING
RET
UR
N
Spring Return Damper ActuatorsMx4D-703x and Mx4D-803x Series 30 lb-in Direct Coupled
Designed for controlling air dampers in building systems that require fail safe return,
with two position, floating or proportional control.
3
• NEMA 2 and Plenum rated • 10’ plenum cable (24V Models), 3’ appliance wires for 120/230 vac models• ½” conduit connection or seal tight • Overload protected throughout stroke• 93° nominal rotation• Automatically adjust input span to match damper travel• Manual override• UL-873, cUL C22-2, CE, C-Tick• Operating Temperature –22 to 140°F (–30 to 60°C)• Humidity 15 to 95% non-condensing
Actuator Inputs Outputs Approximate Timing in seconds @ 70°F Torque Spring VA @ AuxiliaryPart Number lb-in (NM) Return Control Voltage 60Hz Feedback Switch Powered Spring Return
MA4D-7033-100 30 (3.4) CCW 2 Position 24 vac/dc 5.1 — No 56 23
MA4D-7030-000 30 (3.4) CCW 2 Position 120 vac 7.8 — No 56 23
MA4D-7031-000 30 (3.4) CCW 2 Position 230 vac 7.2 — No 56 23
MA4D-8033-100 30 (3.4) CW 2 Position 24 vac/dc 5.1 — No 56 23
MA4D-8030-000 30 (3.4) CW 2 Position 120 vac 7.8 — No 56 23
MA4D-8031-000 30 (3.4) CW 2 Position 230 vac 7.2 — No 56 23
MF4D-7033-100 30 (3.4) CCW Floating 24 vac/dc 6.8 2-10 vdc No 85 21
MF4D-8033-100 30 (3.4) CW Floating 24 vac/dc 6.8 2-10 vdc No 85 21
MS4D-7033-100 30 (3.4) CCW 2-10 vdc 24 vac/dc 6.1 2-10 vdc No 85 21
MS4D-7033-130 30 (3.4_ CCW 6-9 vdc 24 vac/dc 6.1 6-9 vdc No 85 21
MS4D-7033-150 30 (3.4) CCW 0-10 vdc 24 vac/dc 6.1 0-10 vdc No 85 21
MS4D-7033-160 30 (3.4) CCW 4-20 ma 24 vac/dc 6.1 2-10 vdc No 85 21
MS4D-8033-100 30 (3.4) CW 2-10 vdc 24 vac/dc 6.1 2-10 vdc No 85 21
MS4D-8033-130 30 (3.4) CW 6-9 vdc 24 vac/dc 6.1 6-9 vdc No 85 21
MS4D-8033-150 30 (3.4) CW 0-10 vdc 24 vac/dc 6.1 0-10 vdc No 85 21
MS4D-8033-160 30 (3.4) CW 4-20 ma 24 vac/dc 6.1 2-10vdc No 85 21
Value-D
riven General Purpose A
pplications
4
Spring Return Damper Actuators Mx40-704x Series 35 lb-in Direct Coupled
Designed for controlling air dampers in building systems that require
fail safe return, with two position, floating or proportional control.
• NEMA 2 and Plenum rated • ½” conduit connection or seal tight • 3’ plenum cable (24V models), 3’ appliance wires for 120/230 vac models• Overload protected throughout stroke• 95° nominal rotation• Automatically adjust input span to match damper travel• UL-873, cUL C22-2, CE, C-Tick• Operating Temperature –22 to 140°F (–30 to 60°C)• Humidity 15 to 95% non-condensing
Actuator Inputs Outputs Approximate Timing in seconds @ 70°F Torque Spring VA @ AuxiliaryPart Number lb-in (NM) Return Control Voltage 60Hz Feedback Switch Powered Spring Return
MA40-7040 35 (4) CW/CCW 2 Position 120 vac 4.3 — — <50 <28
MA40-7040-501 35 (4) CW/CCW 2 Position 120 vac 4.3 — 1-SPDT <50 <28
MA40-7041 35 (4) CW/CCW 2 Position 230 vac 4.6 — — <50 <28
MA40-7041-501 35 (4) CW/CCW 2 Position 230 vac 4.6 — 1-SPDT <50 <28
MA40-7043 35 (4) CW/CCW 2 Position 24 vac/dc 4.4 — — <50 <28
MA40-7043-501 35 (4) CW/CCW 2 Position 24 vac/dc 4.4 — 1-SPDT <50 <28
MF40-7043 35 (4) CW/CCW Floating 24 vac/dc 5.9 — — <130 <25
MF40-7043-501 35 (4) CW/CCW Floating 24 vac/dc 5.9 — 1-SPDT <130 <25
MS40-7043 35 (4) CW/CCW 2-10 vdc 24 vac/dc 5.6 2-10 vdc — <130 <25
MS40-7043-501 35 (4) CW/CCW 2-10 vdc 24 vac/dc 5.6 2-10 vdc 1-SPDT <130 <25
Hig
h Pe
rfor
man
ce H
VA
C A
pplic
atio
ns
5
Spring Return Damper Actuators Mx41-7xxx Series 60 lb-in and 133 lb-in Direct Coupled
Designed for controlling air dampers in building systems that require
fail safe return, with two position, floating or proportional control.
• NEMA 1 and 2 rated models• ½” conduit connection or seal tight • 3’ plenum cable (24V models), 3’ appliance wires for 120/230 vac models• Overload protected throughout stroke• 95° nominal rotation• Automatically adjust input span to match damper travel• Tandem mounting• Manual override• Reverse action switch (MS41 models)• UL-873, cUL C22-2, CE, C-Tick• Operating Temperature –40 to 160°F (–40 to 71°C)• Humidity 15 to 95% non-condensing
Actuator Inputs Outputs Approximate Timing in seconds @ 70°F Torque Spring VA @ AuxiliaryPart Number lb-in (NM) Return Control Voltage 60Hz Feedback Switch Powered Spring Return
MA41-7070 60 (7) CW/CCW 2 Position 120 vac 5.6 — — <80 <40
MA41-7070-502 60 (7) CW/CCW 2 Position 120 vac 5.6 — 2-SPDT <80 <40
MA41-7071 60 (7) CW/CCW 2 Position 230 vac 8.0 — — <80 <40
MA41-7071-502 60 (7) CW/CCW 2 Position 230 vac 8.0 — 2-SPDT <80 <40
MA41-7073 60 (7) CW/CCW 2 Position 24 vac/dc 4.8 — — <80 <40
MA41-7073-502 60 (7) CW/CCW 2 Position 24 vac/dc 4.8 — 2-SPDT <80 <40
MA41-7150 133 (15) CW/CCW 2 Position 120 vac 10.0 — — <190 <30
MA41-7150-502 133 (15) CW/CCW 2 Position 120 vac 10.0 — 2-SPDT <190 <30
MA41-7151 133 (15) CW/CCW 2 Position 230 vac 10.6 — — <190 <30
MA41-7151-502 133 (15) CW/CCW 2 Position 230 vac 10.6 — 2-SPDT <190 <30
MA41-7153 133 (15) CW/CCW 2 Position 24 vac/dc 9.7 — — <190 <30
MA41-7153-502 133 (15) CW/CCW 2 Position 24 vac/dc 9.7 — 2-SPDT <190 <30
MF41-7073 60 (7) CW/CCW Floating 24 vac/dc 6.2 — — <195 <30
MF41-7073-502 60 (7) CW/CCW Floating 24 vac/dc 6.2 — 2-SPDT <195 <30
MF41-7153 133 (15) CW/CCW Floating 24 vac/dc 9.7 — — <190 <30
MF41-7153-502 133 (15) CW/CCW Floating 24 vac/dc 9.7 — 2-SPDT <190 <30
MS41-7073 60 (7) CW/CCW 2-10vdc 24 vac/dc 5.8 2-10 vdc — <195 <30
MS41-7073-502 60 (7) CW/CCW 2-10vdc 24 vac/dc 5.8 2-10 vdc 2-SPDT <195 <30
MS41-7153 133 (15) CW/CCW 2-10vdc 24 vac/dc 9.7 2-10 vdc — <190 <30
MS41-7153-502 133 (15) CW/CCW 2-10vdc 24 vac/dc 9.7 2-10 vdc 2-SPDT <190 <30
High Perform
ance HV
AC
Applications
6
Spring Return Damper Actuators Mx40-717x Series 150 lb-in Direct Coupled
Designed for controlling air dampers in building systems that require fail safe position.
With two position, floating or proportional control.
• Premier oil immersed gear train construction• NEMA 4 capable • ½” conduit connections• 3’ plenum cable (24V models), 3’ appliance wires for 120/230 vac models• Tandem mounting • Overload protected throughout stroke• 93° nominal rotation• UL-873, cUL C22-2, CE, C-Tick• Operating Temperature –25 to 140°F ( –32 to 60°C)• Humidity 15 to 95% non-condensing
Actuator Inputs Outputs Approximate Timing in seconds @ 70°F Torque Spring VA @ AuxiliaryPart Number lb-in (NM) Return Control Voltage 60Hz Feedback Switch Powered Spring Return
MA40-7170 150 (17) 120 vac 8.4 —
MA40-7171 150 (17) CW/CCW 2 Position 240 vac 9.8 — No 162 82
MA40-7173 150 (17) 24 vac/dc 7.4 —
MF40-7173 150 (17) CW/CCW Floating 24 vac/dc 8.1 — No 162 82
MS40-7170 150 (17) CW/CCW 2-10 vdc 240 vac 8.5 2-10 vdc No 147 65
MS40-7171 150 (17) CW/CCW 2-10 vdc 240 vac 10.8 2-10 vdc No 147 65
MS40-7173 150 (17) CW/CCW 2-10 vdc 24 vac/dc 7.8 2-10 vdc No 147 65
Dam
p &
Har
sh E
nviro
nmen
t A
pplic
atio
ns
7
TAC DuraDrive Non Spring ReturnDirect Coupled ActuatorsTAC OFFERS A COMPLETE LINE OF DIRECT COUPLED ACTUATORS FOR
ALL YOUR NON SPRING RETURN ACTUATOR NEEDS
Direct coupled easy to install, non spring return TAC DuraDrive actuatorsare available with torque ranges from 35 to 300 lb-in for floatingor proportional control.
NON SPRING RETURN
Economical Floating Applications
Value-Driven General Purpose Applications
High Performance HVAC Applications
Damp and Harsh Environment Applications
35 Lb-IN OR 70 Lb-IN MF4E SERIES 35 lb-in or 70 lb-in MF4E series direct coupled to ½” shafts, NEMA 1, floating control, 10’ plenum cable standard, manual override.
35 Lb-IN OR 70 Lb-IN Mx4D-60xx SERIES35 lb-in or 70 lb-in Mx4D-60xx series direct coupled up to ½” shafts, NEMA 2, 10’ plenum rated cable, accepts ½” conduit connector, convenient manual override, two position, floating or proportional control models.
35 Lb-IN OR 70 Lb-IN Mx41-60xx SERIES 35 lb-in or 70 lb-in Mx41-60xx series direct coupled standard mounting to 5/8” shafts, NEMA 2, manual override, 3’ plemun rated cable, optional ½” conduit connection, optional built in auxiliary switches, two position, floating or proportional control.
133 Lb-IN Mx41-61xx SERIES 133 lb-in Mx41-61xx series direct coupled up to ¾” shafts, NEMA 1, manual override, 3’ cable, accepts ½” conduit connector, optional auxiliary switch, two position, floating or proportional control.
300 Lb-IN Mx41-63xx SERIES 300 lb-in Mx41-63xx series direct couple standard mounting to ½” shafts with optional mounting to 1”, manual override, premier oil immersed gear train actuator for long dependable service with a heavy duty NEMA 4 housing, 3’ cable, accepts ½” conduit connector, two position, floating or proportional control.
NO
N SPR
ING
RETU
RN
8
Non Spring Return Damper ActuatorsMx4E-60x30 Series 35 lb-in and 70 lb-in Direct Coupled
Designed for controlling air dampers in building systems with floating control.
• Adjustable stroke limits • NEMA 1 and Plenum rated • 10’ plenum cable with strain relief• Overload protected throughout stroke• 95° nominal rotation• Manual override• UL-873, cUL C22-2, CE, C-Tick• Operating Temperature –22 to 140°F (–30 to 60°C)• Humidity 15 to 95% non-condensing
Actuator Inputs Outputs Torque AuxiliaryPart Number lb-in (NM) Control Voltage VA @ 60Hz Feedback Switch Approximate Timing in seconds @ 70°F
MF4E-60430-100 35 (4) Floating 24 vac 2 No 90
MF4E-60830-100 70 (8) Floating 24 vac 2 No 90
Econ
omic
al F
loat
ing
App
licat
ions
9
Non Spring Return Damper ActuatorsMx4D-60x3 Series 35 lb-in and 70 lb-in Direct Coupled
Designed for controlling air dampers in building systems with floating
or proportional control.• NEMA 2 and Plenum rated • 10’ plenum cable• ½” conduit connection or seal tight • Overload protected throughout stroke• 93° nominal rotation• Automatically adjust input span to match damper travel• Manual override• UL-873, cUL C22-2, CE, C-Tick• Operating Temperature –22 to 140°F (–30 to 60°C)• Humidity 15 to 95% non-condensing
Actuator Inputs Outputs Torque AuxiliaryPart Number lb-in (NM) Control Voltage VA @ 60Hz Feedback Switch Approximate Timing in seconds @ 70°F
MF4D-6043-100 35 (4) Floating 24 vac/dc 4.4 2-10 vdc No 85
MF4D-6083-100 70 (8) Floating 24 vac/dc 5.9 2-10 vdc No 85
MS4D-6043-100 35 (4) 2-10 vdc 24 vac/dc 4.2 2-10 vdc No 85
MS4D-6043-130 35 (4) 6-9 vdc 24 vac/dc 4.2 6-9 vdc No 85
MS4D-6043-150 35 (4) 0-10 vdc 24 vac/dc 4.2 0-10 vdc No 85
MS4D-6043-160 35 (4) 4-20 ma 24 vac/dc 4.2 2-10 vdc No 85
MS4D-6083-100 70 (8) 2-10 vdc 24 vac/dc 5.2 2-10 vdc No 85
MS4D-6083-130 70 (8) 6-9 vdc 24 vac/dc 5.2 6-9 vdc No 85
MS4D-6083-150 70 (8) 0-10 vdc 24 vac/dc 5.2 0-10 vdc No 85
MS4D-6083-160 70 (8) 4-20 ma 24 vac/dc 5.2 2-10 vdc No 85
Value-D
riven General Purpose A
pplications
10
Non Spring Return Damper ActuatorsMx41-60x3 Series 35 lb-in and 70 lb-in Direct Coupled
Designed for controlling air dampers in building systems with
floating or proportional control.
• Compact Design• NEMA 2 and Plenum rated • Automatically adjust input span to match damper travel• 3’ plenum cable• Overload protected throughout stroke• 95° nominal rotation• Manual override• Auxiliary Switches Optional• Adjustable zero and span model available• UL-873, cUL C22-2, CE• Operating Temperature –25 to 130°F ( –32 to 55°C)• Humidity 15 to 95% non-condensing
Actuator Inputs Outputs Torque AuxiliaryPart Number lb-in (NM) Control Voltage VA @ 60Hz Feedback Switch Approximate Timing in seconds @ 70°F
MF41-6043 35 (4) Floating 24 vac 2.3 — — 90
MF41-6043-510 35 (4) Floating 24 vac 2.3 1000 ohm — 90
MF41-6043-502 35 (4) Floating 24 vac 2.3 — 2-SPDT 90
MF41-6083 70 (8) Floating 24 vac 2.3 — — 125
MF41-6083-510 70 (8) Floating 24 vac 2.3 1000 ohm — 125
MF41-6083-502 70 (8) Floating 24 vac 2.3 — 2-SPDT 125
MS41-6043 35 (4) 0-10 vdc 24 vac 3.3 0-10 vdc — 90
MS41-6043-520 70 (8) 0-10 vdc* 24 vac 3.3 0-10 vdc — 90
MS41-6043-502 70 (8) 0-10 vdc 24 vac 3.3 0-10 vdc 2-SPDT 90
MS41-6083 70 (8) 0-10 vdc 24 vac 3.3 0-10 vdc — 125
MS41-6083-520 70 (8) 0-10 vdc* 24 vac 3.3 0-10 vdc — 125
MS41-6083-502 70 (8) 0-10 vdc 24 vac 3.3 0-10 vdc 2-SPDT 125
* Adjustable
Hig
h Pe
rfor
man
ce H
VA
C A
pplic
atio
ns
11
Non Spring Return Damper ActuatorsMx41-6153 Series 133 lb-in Direct Coupled
Designed for controlling air dampers in building systems with
floating or proportional control.
• NEMA 1 • Span adjust Function Switch• 0-10 vdc (factory set), 2-10 input switch or floating control• 3’ plenum cable• Overload protected throughout stroke• Tandem mounting• 95° nominal rotation• Manual override• ½” conduit connection• Auxiliary Switches Optional• UL-873, cUL C22-2, CE• Operating Temperature –25 to 130°F ( –32 to 55°C)• Humidity 15 to 95% non-condensing
Actuator Inputs Outputs Torque AuxiliaryPart Number lb-in (NM) Control Voltage VA @ 60Hz Feedback Switch Approximate Timing in seconds @ 70°F
MF41-6153 133 (15) Floating 24 vac 3 — — 125
MS41-6153 133 (15) 0-10 vdc 24 vac 5 0-10 vdc — 125
MS41-6153-502 133 (15) 0-10 vdc 24 vac 5 0-10 vdc 2-SPDT 125
High Perform
ance HV
AC
Applications
Non Spring Return Damper ActuatorsMx41-634x Series 300 lb-in Direct Coupled
Designed for controlling air dampers in building systems with
floating or proportional control.
• Premier oil immersed gear train construction• NEMA 4 capable • ½” conduit connections• 3’ plenum cable (24V models), 3’ appliance wires for 120/230 vac models• Overload protected throughout stroke• 93° nominal rotation• Manual override• Tandem Mounting• UL-873, cUL C22-2, CE, C-Tick• Operating Temperature –25 to 140°F ( –32 to 60°C)• Humidity 15 to 95% non-condensing
Actuator Inputs Outputs Torque AuxiliaryPart Number lb-in (NM) Control Voltage VA @ 60Hz Feedback Switch Approximate Timing in seconds @ 70°F MF41-6343 300 (34) Floating 24 vac/dc 5.7 — No 162
MS41-6343 300 (34) 2-10 vdc 24 vac/dc 5.6 2-10 vdc No 148
MS41-6340 300 (34) 2-10 vdc 120 vac 7.5 2-10 vdc No 148
MS41-6341 300 (34) 2-10 vdc 240 vac 9.0 2-10 vdc No 148
12
Dam
p &
Har
sh E
nviro
nmen
t A
pplic
atio
ns
Copyright © April, 2008, TACAll brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change without notice. All rights reserved.
F-27272
1354 Clifford Avenue
Loves Park, IL 61111
815-637-3000
www.tac.com