Table Top Accessories

2 Bridge Street, Suite 220, Irvington, NY 10533 • Toll Free: 888-442-5265 • Fax 914-478-4278 • www.BlankQuilting.com

Fabric designed by Hoodie's Collection for Blank Quilting

Table Top Accessories designed by

Cate Tallman-Evans for Blank Quilting

Table Top Accessories

Centerpiece/Hot Pad

Finished Size: 19" x 19"

4 Placemats


Table Runner

Finished Size: 10" x 59-1/4"

Veggie�PatchFabric designed Hoodie's Collection for Blank QuiltingPlacemats designed Cate Tallman-Evans for Blank Quilting

Placemats

page 2

Cutting Instructions:All strips are cut across the width of the fabric from selvage edge to selvage edge.Please note that many fabrics are directional prints. The cutting instructions are written to yield patches where the print isoriented correctly. After cutting the pieces listed below, reserve all uncut yardage for appliqués.

From EACH of Fabrics A, B, C, and D:(1) 18" x 25" piece for backing(2) 4-1/2" x 21 1/2" strips.

From Fabric F:(8) 2 1/4" strips for the bindings.

Make the Appliqués:1. Print out the paper patterns provided making sure the "do not scale" option is selected during printing.

2. Using the printed patterns and template plastic, make templates for each motif.

3. Trace the indicated number of each template onto the paper side of the fusible webbing, leaving at least 1/2"margin between traced shapes.

4. Cut out each shape 1/4" beyond the traced line and fuse to the wrong side of the appropriate fabric, keepingeach shape oriented correctly on the directional print fabrics.

5. Cut out each motif on the traced line.

6. Using the placemats pictured as a guide, fuse the appliqués to the appropriate background fabric, layering theappliqués where shown and making sure the motifs are centered on the background pieces.

7. Using matching thread and the decorative machine stitch of your choice, overcast all raw edges of eachappliqué shape.

Sewing Instructions:All seams are sewn with right sides together, raw edges even, and 1/4" seam allowance.

1. Stitch a 4 1/2" x 21 1/2" Fabric B piece to the top and bottom of the appliqué pepper block. In the same manner, complete the tomato, onion, and eggplant placemat fronts.

2. Layer each completed placemat front with batting and matching backing and quilt as desired.

3. Trim each finished placemat and bind using the 2-1/4" Fabric F strips.

Fabric Requirements:

Fabric E: 3/4 yd. 6061 Green (peas)(includes backing)

Fabric F: 1/2 yd. 5287 ForestFabric G: 3/8 yd. 5296 LettuceFabric K: 5/8 yd. 5296 Cocoa

(1) 23" x 23" pieces of batting1 yard of 20" wide, lightweight, double-sided, fusible webbingTemplate plastic100% cotton thread to blend with fabricsThread to blend with appliquésUsual sewing supplies


From Fabric G:(2) 6-1/2" x 21-1/2" strips.

From EACH of Fabrics H and N:(1) 6-1/2" x 21-1/2" strip.

(Templates on pages 6-11)

Veggie�PatchFabric designed Hoodie's Collection for Blank QuiltingCenterpiece/Hot Pad designed Cate Tallman-Evans for Blank Quilting

Centerpiece/Hot Pad

page 3


From Fabric E:(1) 22" x 22" square for backing.(2) 2-1/2" x 19-1/2" strips.(2) 2-1/2" x 15-1/2" strips.



3. Trace the indicated number of each template onto the paper side of the fusible webbing, leaving at least 1/2" margin between traced shapes.

4. Cut out each shape 1/4" beyond the traced line and fuse to the wrong side of the appropriate fabric, keeping each shape oriented correctly on the directional print fabrics.


6. Using the centerpiece pictured as a guide, fuse the appliqués to the background fabric, layering the appliqués where shown and making sure the motifs are centered on the background piece.


Sewing Instructions:All seams are sewn with right sides together, raw edges even, and 1/4" seam allowance.

1. Stitch 2-1/2" x 15-1/2" Fabric E pieces to the left and right sides of the appliqué block. Stitch 2-1/2" x 19-1/2"Fabric E pieces to the top and bottom.

2. Layer the completed front with batting and backing and quilt as desired.

3. Trim the finished centerpiece/hot pad and bind using the 2-1/4" Fabric F strips.


Fabric E: 3/4 yd. 6061 Green (peas)(includes backing)

Fabric F: 1/2 yd. 5287 ForestFabric G: 3/8 yd. 5296 LettuceFabric K: 5/8 yd. 5296 Cocoa

(1) 23" x 23" pieces of batting1 yard of 20" wide, lightweight, double-sided, fusible webbingTemplate plastic100% cotton thread to blend with fabricsThread to blend with appliquésUsual sewing supplies


From Fabric F:(2) 2-1/4" strips for the binding.

From Fabric K:(1) 15-1/2" x 15-1/2" square.


(Table Runner sewing instructions on following page)

Veggie�PatchFabric designed Hoodie's Collection for Blank QuiltingTable Runner designed Cate Tallman-Evans for Blank Quilting

Table Runner


From EACH of Fabrics A, B, and C:(1) 16" wide x 13-1/2" high piece for backing.(4) 3" wide x 5-1/2" high pieces.

From Fabric D:(1) 16" wide x 13-1/2" high piece for backing.(4) 1-1/2" wide x 5" high pieces.

From Fabric E:(1) 16" wide x 13-1/2" high piece for backing.(4) 1-1/2" wide x 6-1/2" high pieces.

From Fabric F:(4) 2-1/4" strips for the binding.

(3) 1-1/4" strips. Recut into (11) 1-1/4" x 10-1/2" pieces.



3. Trace the indicated number of each template onto the paper side of the fusible webbing, leaving at least 1/2" margin between traced shapes.

4. Cut out each shape 1/4" beyond the traced line and fuse to the wrong side of the appropriate fabric, keeping each shape oriented correctly on the directional print fabrics.


6. Using the table runner pictured as a guide, fuse the appliqués to the appropriate background fabric, layeringthe appliqués where shown and making sure the motifs are centered on the background pieces.



Fabric A: 1/2 yd. 6060 Red (tomatoes)Fabric B: 1/2 yd. 6059 Green (peppers)Fabric C: 1/2 yd. 6062 Brown (onions)Fabric D: 1/2 yd. 6063 Purple (eggplant)Fabric E: 1/2 yd. 6061 Green (peas)

(includes backing)Fabric F: 5/8 yd. 5287 Forest

(includes binding)

Fabric G: 1/4 yd. 5296 LettuceFabric H: 1/4 yd. 5296 OnyxFabric I: 5296 RedFabric J: 1/4 yd. 5296 CocoaFabric K: 1/4 yd. 5287 ButterFabric L: 1/4 yd. 5287 EggplantFabric M: 1/4 yd. 5287 Brown

16" x 65-1/2" piece of batting1 yard of 20" wide, lightweight, double-sided, fusible webbingTemplate plastic100% cotton thread to blend with fabricsThread to blend with appliquésUsual sewing supplies

Finished Size: 10" x 59-1/4"

From Fabric G:(1) 5-1/2" strip. Recut into (2) 5-1/2" x 5-1/2" squares and (2) 5-1/2" x 8-1/2" pieces.

From EACH of Fabrics H and N:(1) 5-1/2" strip. Recut into (2) 5-1/2" x 5-1/2" squares.

From Fabric K:

(1) 6-1/2" strip. Recut into (2) 6-1/2" x 8-1/2" pieces.(4) 2-1/2" strips for the outer border.


Table Runner Sewing Instructions:

All seams are sewn with right sides together, raw edges even, and 1/4" seam allowance.

Make The Tomato, Onion and Pepper Sections:Stitch 3" x 5-1/2" Fabric A pieces to the left and right sides of a 5-1/2" tomato appliqué square. Repeat to make atotal of (2) tomato sections. Repeat this procedure to make (2) onion and (2) pepper sections.

Make The Eggplant Sections:Stitch a 1-1/2" x 5" Fabric D piece to the left and right sides of a 5" x 8-1/2" eggplant appliqué block. Repeat tomake a total of (2) eggplant sections.

Make The Pea Sections:Stitch a 1-1/2" x 6-1/2" Fabric E piece to the left and right sides of a pea appliqué block. Repeat to make a total of(2) pea sections.

Table Runner Assembly and Finishing:1. Referring to the table runner pictured, stitch together the (10) appliqué sections and the (11) 1-1/4" x 10-1/2"

Fabric F pieces, alternating the two types of units and noting orientation of the appliqué motifs.2. To piece the backing, stitch the (5) 16" wide x 13-1/2" high Fabric A-E pieces together end to end to make a

piece 16" wide x 65-1/2" long.3. Layer the completed table runner top with batting and backing and quilt as desired.4. Trim the finished quilt and bind using the 2 _" Fabric F strips.

(Quilt assembly and finishing instructions continued on next page)

Downloads from the internet are not always consistent.

Please compare this ruler with an actual ruler to verify size accuracy of templates before cutting.

In addition, check your printer dialog box and turn off page scaling for accurate printouts.

BLK-2752-004

While all possible care has been taken to ensure the accuracy of this pattern, we are not responsible for printing errors or the way in which individual work varies.

© 2010 Blank Quilting • All rights reserved2 Bridge Street, Suite 220, Irvington, NY 10533 • Toll Free: 888-442-5265 • Fax 914-478-4278 • www.BlankQuilting.com

Downloads from the internet are not always consistent.

Please compare this ruler with an actual ruler to verify size accuracy of templates before cutting.

In addition, check your printer dialog box and turn off page scaling for accurate printouts.

Table Top Accessories

Documents

Transcript of Table Top Accessories