TABLE OF CONTENTS

PLENARY PAPERS Globalisation in the mining and mineral processing industry

Brian Gilbertson - Lonmin PLC ................................................................................................................. No Paper

The impact of fundamental research on minerals processing operations of the future Prof Richard A Williams – University of Leeds, United Kingdom............................................................... Vol 1:2

Future of mineral processing education Prof Jim A Finch – McGill University, Canada .......................................................................................... Vol 1:14

Sustainability in the minerals industry: threat or opportunity? Prof Jannie S J van Deventer and G C Lukey – University of Melbourne, Australia.................................. Vol 1:23

The mine of the future – Will it be visible? Dr Robin B Batterham – Rio Tinto Ltd, Australia ...................................................................................... Vol 1:42

KEYNOTE PAPERS Grinding mills: How to accurately predict their power draw

(Theme: comminution, classification and agglomeration) Dr Steven Morrell – Julius Krutschnitt Mineral Research Centre, Australia .............................................. Vol 1:50

Design, modelling and control of flotation equipment (Theme: flotation)

Prof Juan B Yianatos – Santa Maria University, Chile ............................................................................... Vol 1:60

New developments in the leaching of base and precious metal ores and concentrates (Theme: hydro- and biometallurgy)

Prof David Dreisinger – University of British Columbia, Canada .............................................................. Vol 1:70

The optimisation of the resource cycle impact of the combination of technology, legislation and economy (Theme: waste treatment and management)

Prof Wijnand L Dalmijn, M A Reuter, T P R deJong and U M J Boin– Technical University of Delft, The Netherlands .................................................................................... Vol 1:81

The critical role of interfacial chemistry in bubble-particle capture (Theme: flotation)

Prof John Ralston – Ian Wark Research Institute, Australia ..................................................................... Vol 1:107

Simulation, control and modelling of mineral processes (Theme: simulation control and modelling of mineral processes)

Dr Dave G Hulbert – Mintek, South Africa .............................................................................................. Vol 1:117

Pyrometallurgy – The key to sustainable use of materials (Theme: pyrometallurgy)

Prof Markus A Reuter U M J Boin, A van Sckaik, E V Verhoef and J J Eksteen– Technical University of Delft, The Netherlands .................................................................................. Vol 1:128

Recent trends in base metal and precious metal processing (Theme: base and precious metal processing)

Dr Larry A Cramer – Anglo Platinum, South Africa ................................................................................ Vol 1:150

ANALYSIS AND CHARACTERISATION OF MATERIALS Toward a mineral liberation sensor

G Schena and F Montanari: University of Trieste, Italy............................................................................ Vol 1:162

EBSD - A potential supplementary technique in quantitative characterisation of minerals

K Moen, T Malvik, J Hjelen and J R Leinum: Norwegian University of Science and Technology, Norway. .......................................................................................................................... Vol 1:171

Assessment of stereological equations for mineral processing S Gay and D Latti: Julius Kruttschnitt Mineral Research Centre, University of Queensland,

Australia............................................................................................................................................... Vol 1:181

Laboratory tests on the production of high quality zeolite G. Bulut, O. Kangal, M. Özer, M. Tarkan, Y.E Benkli and G. Önal: Istanbul Technical

University, Turkey. .............................................................................................................................. Vol 1:191

Structure modelling and property prediction for mineral processing R A Williams and X Jia: University of Leeds, United Kingdom. ............................................................. Vol 1:198

The feasibility of the Richardson-Zaki model for fluidisation under conditions of increased gravity

A B Nesbitt and S Lalloo: Cape Technikon, South Africa. ....................................................................... Vol 1:207

COMMINUTION, CLASSIFICATION, GRAVITY AND PHYSICAL SEPARATION Coarse crushing of rocks by impact

G Unland and T Wegner: Technische Universitat Bergakademie Freiberg, Germany.............................. Vol 1:214

Triboelectric charge characteristics and electrical separation of wollastonite from complex silicate ore

H-R Manouchehri: Luleå, Sweden. ........................................................................................................... Vol 1:222

Non-traditional highly effective breaking-up technology for resistant gold-containing ores and beneficiation products

V A Chanturiya, I J Bunin, V D Lunin, Y V Gulyaev and G V Sedelnikova: IPKON RAS, Russia................................................................................................................................................... Vol 1:232

Investigations on mechanisms of abrasive particle stress H Z Kuyumcu, L Rolf and M A Salas Cazon: TU Berlin, Germany......................................................... Vol 1:242

Comparative liberation study by image analysis of Merensky reef samples comminuted by electric-pulse disaggregation and by conventional crusher

R. Lastra, L J Cabri and P.W. Weiblen: NRCan CANMET MMSL, Canada. .......................................... Vol 1:251

Innovation in magnetic techniques of material treatment: technology at Crossroad J Svoboda and T Fujita: De Beers Consolidated Mines Ltd., South Africa. ............................................. Vol 1:261

Accurate, economical grinding circuit design using SPI and Bond J Starkey: Starkey & Associates, Canada. ................................................................................................. Vol 1:270

The collection and analysis of single sensor surface vibration data to estimate operating conditions in pilot-scale and production-scale AG/SAG mills

J J Campbell, R J Holmes, S J Spencer, V Sharp, K J Davey, D G Barker and P L Phillips: CSIRO Minerals, Australia.................................................................................................................. Vol 1:280

Characterization of the centrifugal mill by lumped kinetic math model and discrete element model

T Inoue and K Okaya: University of Tokyo, Japan................................................................................... Vol 1:289

Analysis of powder processing in the roller press using finite element modelling A Zavaliangos, R T Dec and R K Komarek: K.R. Komarek Briquetting Research, Inc., USA. ............... Vol 1:298

Application of DEM outputs to refining applied SAG mill models M S Powell, A T McBride and I Govender: University of Cape Town, South Africa. ............................. Vol 1:307

Use of the three-product cyclone in duel-density ore classification A Mainza and M S Powell: University of Cape Town, South Africa........................................................ Vol 1:317

Application of high electric field strength microwave energy for processing ores and minerals

S Kingman D Whittles, K Jackson, N Miles and S Bradshaw: University of Nottingham, United Kingdom. ................................................................................................................................. Vol 1:327

Correlation between the velocities of particle spin and particle settling and the optimal stream velocity in gravity separation

E Barsky and M Barsky: Ben-Gurion University of the Negev, Israel...................................................... Vol 1:336

Advances in autogenous and semi-autogenous grinding V G Kochnev: TTD CO., LTD, Russia. .................................................................................................... Vol 1:343

Analysis of autogenous and semi-autogenous grinding test data for prediction of plant performance

B K Loveday and A H Hinde: University of Natal, South Africa. ............................................................ Vol 1:355

Prediction of liberation from unbroken 3-phase texture: A case study on a coal sample C L Schneider, R Neumann and R P King: CETEM - Center for Mineral Technology, Brasil. ............... Vol 1:363

Non-contact acoustics measurement and validation of SAG mill operation R Pax, N Djordjevic and R Hocking: Julius Kruttschnitt Mineral Research Centre, University

of Queensland, Australia...................................................................................................................... Vol 1:371

Towards a new understanding of the cyclone separator M S Brennan, V Subramanian, RX Rong, PN Holtham, GJ Lyman and T Napier-Munn: Julius

Kruttschnitt Mineral Research Centre; University of Queensland, Australia. ..................................... Vol 1:378

The influence of: Grate versus overflow discharge in open circuit milling; open versus closed circuit milling with an overflow mill

J Lux and B Clermont: Magotteaux (Pty) Ltd, South Africa..................................................................... Vol 1:387

Ferrosilicon: DMS medium characterisation and degradation during use F B Waanders, A Mans: Potchefstroom University, South Africa. ........................................................... Vol 1:396

Concentration of fine gold from tailings on the magnetic sluice box V Avdokhin and I Kovlekov: Moscow State University of Mining, Russia. ............................................ Vol 1:402

Ultra-fine grinding characteristics of crystalline graphite on dry base system B-G Kim, S-K Choi, H-S Chung, C-L Park and J-J Lee: KIGAM, Korea. ............................................... Vol 1:410

Experimental scale-up of the screen models M I Oja and H J Lehto: Helsinki University of Technology, Finland. ...................................................... Vol 1:419

Efficient elimination of stubborn slimes using Hydrocyclone P. Bhattacharyya, D M Chakrabarti, B Banerjee, P Saha, B R Sarkhel

and J P Srivastava: National Metallurgical Laboratory, India. ............................................................ Vol 1:427

New test method for investigation of grindability in alkaline media and by high-temperature

B Csoke, Z Hatvani, J Faitli, K Solymar and D Papanastassiou: University of Miskolc, Hungary. .............................................................................................................................................. Vol 1:434

Influence of the tower mill’s classifying column structure on the size of collected products

T Furuyama, S Mori, N Hashiguchi and T Okuma: Kyushu University, Japan. ....................................... Vol 1:442

Optimisation of mill feed by LIF Techniques A Volland and H F Broicher: ROCK ID - Gesteinerkennung GmbH, Germany. ..................................... Vol 1:450

On-Line identification and classification of grinding mill behavior and optimizing trajectories

S Makni and A Bouajila: COREM, Canada. ............................................................................................. Vol 1:459

Ultra-fine grinding of minerals using high-pressure liquid jet technology M. Mazurkiewicz, C Davey, P Kanjorski, D Hankey and Y Spooner: Cornerstone

Technologies, LLC, USA. ................................................................................................................... Vol 1:469

Improving milling circuits through aggressive approach to cyclone and overall circuit operation

R van Ommen, A J Schutte, P A Turner and T J Olson: Krebs Engineers Europe, Austria...................... Vol 1:474

DESIGN OF MINERAL PROCESSING PLANTS & INNOVATION Design, simulation and operation column flotation

J B Rubinstein: Academy of Mining Sciences, Russia.............................................................................. Vol 1:486

Beneficiation of gold bearing ores associated with the tertiary volcanism in south Sardinia (Italy)

S Di Giovanni, G Zonnedda, M Ghiani, A Serci, R Peretti and A Zucca: University of Cagliari, Italy. ..................................................................................................................................................... Vol 1:493

Development of leaching process for MN extraction using carbohydrates as reducing agents: Operating condition optimisation kinetic model, and leach liquor purification

F Pagnanellia, L Toro and F Vegliò: Università degli Studi di Roma "La Sapienza", Italy...................... Vol 1:501

Economic production of feldspar for the ceramic industries P Bevilacqua, L De Lorenzi and P Antonini: University of Trieste, Italy................................................. Vol 1:510

A topographical map of the Innovation Landscape A W Kleingeld, V E Ross and L Lorenzen: University of Stellenbosch, South Africa............................. Vol 1:517

The influence of feed size on Autogenous and Semi-autogenous Grinding and the role of blasting in its manipulation

S Morrell: Julius Kruttschnitt Mineral Research Centre, University of Queensland, Australia. ............... Vol 1:526

Conceptualizing trade-offs between profitability, evergy input and water recovery in minerals beneficiation

A H Mwale, M Wright and J G Petrie: University of Cape Town, South Africa. ..................................... Vol 1:534

Reduction of the AS-content in colemanite concentrates P Massacci, S Serranti, M Ghiani, R Peretti, A Zucca and A Manni: University of Rome “La

Sapienza”, Italy.................................................................................................................................... Vol 1:543

Technology and raw materials for solar cell quality quartz E Larsen and K L Sandvik: Norwegian University of Science and Technology, Norway. ........................ Vol 1:552

New ways of processing mineral and technogenic raw materials Genrich A. Denisov: St.-Petersburg Ltd "Institute Mekhanobr", Russia................................................... Vol 1:561

A sustainability analysis of the metals value chain: a focus on copper M Stewart, D Giurco and J Petrie: University of Sydney, Australia. ....................................................... Vol 1: 572

DIAMONDS, HEAVY MINERALS, INDUSTRIAL MINERALS AND COAL PROCESSING Mineral processing techniques for coal combustion by-products

S K Kawatra and T C Eisele: Michigan Technological University, USA. ................................................ Vol 2:584

Coal flotation in electrolyte solutions A V Nguyen, P A Harvey, G M Evans and G J Jameson: The University of Newcastle,

Australia............................................................................................................................................... Vol 2:594

Production of phosphate concentrates from slimes: Brazilian experience R C Guimarães and A E C Peres: Universidade Federal de Minas Gerais-UFMG, Brasil........................ Vol 2:606

The development of a new air jig for dry coal beneficiation L Weitkämper and H Wotruba: Lehr- und Forschungsgebiet Aufbereitung, Germany............................. Vol 2:613

Application of electrical disintegration to coal S Owada, M Ito, T Ota, T Nishimura, T Ando, T Yamashita and S Shinozaki: Waseda

University, Japan. ................................................................................................................................ Vol 2:623

Enhancement of filtration kinetics of fine coal using microorganisms S P Vijayalakshmi and A M Raichur: Indian Institute of Science, India................................................... Vol 2:632

Characterisation and processing of Indian ilmenites P N M Das & K H Bhat: Regional Research Laboratory (CSIR), India.................................................... Vol 2:642

The De Wet Process for the Beneficiation of Zircon: Optimisation of the Alkali Fusion Step

A Manhique, W W Focke, Z Kwela and W van der Merwe: University of Pretoria, South Africa. .................................................................................................................................................. Vol 2:652

Beneficiation of lowgrade chromite ores: Experiences at Tata Steel S. Rao, P V T Rao, N D Reo, O N Mohanty and T Mukherjee: The Tata Iron and Steel

Company, India.................................................................................................................................... Vol 2:660

Iron removal of Yaliköy Sand Dunes G. Onal, N. Acarkan and Z. Doğan: Istanbul Technical University, Turkey. ........................................... Vol 2:671

FLOTATION, DEWATERING AND RELATED SURFACE CHEMISTRY PROCESSES Microbially induced mineral flotation and flocculation

K A Natarajan: Indian Institute of Science, India...................................................................................... Vol 2:676

The influence of acting forces on drainage and rupture of wetting films K W Stöckelhuber, A Wenger and H J Schulze: Freiberg University of Mining and

Technology, Germany. ........................................................................................................................ Vol 2:687

The effect of grinding conditions on fine galena flotation and separation from pyrite Y Peng, S Grano, D Fornasiero and J Ralston: Ian Wark Research Institute, University of

South Australia, Australia.................................................................................................................... Vol 2:696

Fundamental studies of inco matte between separation process M Xu, P F Wells and G P Wong: Inco Technical Services Ltd, Ontario, Canada..................................... Vol 2:706

Air and fluid dynamics within a Jameson Cell downcomer and its implications for bubble-particle contact in flotation

G J Harbort, E V Manlapig, S K DeBono and A J Monaghan: University of Queensland, Australia............................................................................................................................................... Vol 2:715

Frothing and surface tension effects in the fatty acid / nonionic (collector/frother) flotation system

R J Pugh and K Theander: Institute for Surface Chemistry, Sweden. ....................................................... Vol 2:725

Effect of water quality on pentlandite-pyroxene floatability with an emphasis on calcium ions

V Malysiak, N J Shackleton, D De Vaux and C T O'Connor: Anglo Platinum Research Centre, South Africa......................................................................................................................................... Vol 2:734

The role of complexing agents and disperants in Pentlandite-Pyroxene separation by flotation

N J Shackleton, V Malysiak, C T O’Connor and D De Vaux: Anglo Platinum Research Centre, South Africa......................................................................................................................................... Vol 2:743

Theoretical aspects of gold-bearing sulfides selective flotation V A Chanturiya, A A Fedorov, T N Matveyeva, T V Nedosekina and T A Ivanova: IPKON

RAS, Russia......................................................................................................................................... Vol 2:753

Flotation and surface interactions of Wollastonite-dodecylamine system P Swarna, H R Kota and W Forsling: Lulea University of Technology, Sweden. .................................... Vol 2:764

Acidic medium flotation separation of chromite from olivine and serpentine G. Belardi, N. Shehu, S. Cico, G. Demi: Istituto Trattamento dei Minerali, Italy..................................... Vol 2:774

Fundamental properties of flotation frothers J S Laskowski: University of British Columbia, Canada. ......................................................................... Vol 2:788

Requirements for the effective simulation of the flotation process R I Pascual and W Whiten: Julius Kruttschnitt Mineral Research Centre, University of

Queensland, Australia. ......................................................................................................................... Vol 2:798

Use of synthetic polymers for the depression of iron sulfide minerals in zinc and copper ores

A Boulton, D Fornasiero and J Ralston: Ian Wark Research Institute; University of South Australia, Australia. ............................................................................................................................. Vol 2:807

The influence of particle size and collector coverage on the floatability of galena particles in a natural ore

S M Vianna, J-P Franzidis, E V Manlapig, E Silvester and P-H Fu: Julius Kruttschnitt Mineral Research Centre, University of Queensland, Australia........................................................................ Vol 2:816

Techniques and methodologies for improving thickener performance J B Farrow, P D Fawell, L Mittoni, T V Nguyen, M Rudman, K Simic and J D Swift: CSIRO

Minerals, Australia. ............................................................................................................................. Vol 2:827

Thin film studies on silica in mixed cationic-anionic surfactant system L B Alexandrova, H R Kota, E Forssberg, R J Pugh and L S Grigorov: Luleå University of

Technology, Sweden............................................................................................................................ Vol 2:838

Flocculation And Dewatering of Clay Dispersions P Mpofu, J Addai-Mensah and J Ralston: Ian Wark Research Institute, University of South

Australia, Australia. ............................................................................................................................. Vol 2:847

The application of power ultrasound to surface cleaning and activation in mineral processing

A Farmer and A Collings: Agricola Consulting Services, New South Wales, Australia .......................... Vol 2:857

Influence of galvanic effect on adsorption of xanthate on pyrite, galena and chalcopyrite

E Mielczarski and J A Mielczarski: INPL/CNRS, France......................................................................... Vol 2:866

The Impact of operating variables on flotation performance: A simulation study S J Neethling and J J Cilliers: UMIST, United Kingdom.......................................................................... Vol 2:874

Separation in froth: An effective technique for coarse flotation J O Leppinen, A V Lashkul, V E Nenno, K T Ingerttilä and J O Kallioinen: VTT

Mineraalitekniikka, Finland................................................................................................................. Vol 2:882

Trithiocarbonate collectors in pyrite flotation: Fundamentals and applications R du Plessis, J D Miller and J. C Davidtz: University of Utah, USA........................................................ Vol 2:892

Surface chemical studies on galena and sphalerite using mineral-adapted Bacillus polymyxa

D Santhiya, S Subramanian, K A Natarajan and S S Indi: Indian Institute of Science, India.............. Vol 2:902

Interactions of gum depressants with talc: Study of adsorption by spectroscopic and allied techniques

P Somasundaran, J Wang, Z Pan, D F Nagaraj, H L Chen and G Anastassakis: Columbia University, USA. ................................................................................................................................. Vol 2:912

Decoupling the effect of depression and dispersion in the batch flotation of a platinum bearing ore

C Robertson, D Bradshaw, P Harris: University of Cape Town, South Africa. ........................................ Vol 2:920

The relationship between concentrate yield and descriptors from a machine vision system in a platinum flotation application

D P Hatfield, D J Bradshaw and G de Jager: University of Cape Town, South Africa............................. Vol 2:929

Froth stability and flotation performance E Ventura-Medina, N Barbian, and J Cilliers, UMIST, United Kingdom................................................. Vol 2:937

Gangue drainage in flotation froths S Ata, N Ahmed and G J Jameson: University of Newcastle, Australia. .................................................. Vol 2:946

The development of a new method for comparing depressant behaviour in flotation using machine vision

G S Heinrich, L Burdukova, D J Bradshaw and P J Harris: University of Cape Town, South Africa. ..... Vol 2:955

A study of the flotation characteristics of different mineralogical classes in different steams of an industrial circuit

K C Runge, J P Franzidis and E V Manlapig: Julius Kruttschnitt Mineral Research Centre, University of Queensland, Australia.................................................................................................... Vol 2:962

Structuring a flotation model for robust prediction of flotation circuit performance K C Runge, J P Franzidis, E V Manlapig and M C Harris: Julius Kruttschnitt Mineral Research

Centre, University of Queensland, Australia. ...................................................................................... Vol 2:973

Flotation recovery of copper from calcium-ferrite-based slags produced in laboratory smelting trials

W J Bruckard, M A Somerville and G Heyes: CSIRO Minerals, Australia. ............................................. Vol 2:985

Sulfide ore flotation with extracellular polymeric substances (EPS) as biological depressant reagents

V Vogt, E Gock and W Sand: Technische Universität Clausthal, Germany. ............................................ Vol 2:997

Aggregation effects of Zn and Mg ions in sulphide mineral Pulps M Mirnezami, M S Hashemi, A L Restrepo, A Buchanan and J A Finch: McGill University,

Canada. .............................................................................................................................................. Vol 2:1007

Advances in flotation of minerals fines J Rubio, F Capponi, E Matiolo, D Nunes, C P Guerrero and G Berkowitz: Mineral e

Ambiental-Universidade Federal do Rio, Brasil. ............................................................................... Vol 2:1014

Seawater usage in flotation for minerals' beneficiation in Arid Regions (Arab Countries) (simulation and application)

A A Yousef, M A Arafa, S S Ibrahim and M A A Khalek: CMRDI, Egypt. .......................................... Vol 2:1023

Interfacial phenomena involved in talc flotation and depression D W Fuerstenau and P Huang: University of California, USA. .............................................................. Vol 2:1034

Influence of nanoscale roughness on flotation B M Moudgil, S C Brown and I U Vakarelski: University of Florida, USA. .......................................... Vol 2:1044

The electrokinetic properties and flotation behaviour of quartz and feldspar in the presence of polymeric surfactants

M S EL Salmawy, E Kusaka and T Wakamatsu: Suez Canal University, Egypt. ................................... Vol 2:1053

Investigations of the activating effect of frothers and organic depressors under cationic flotation

S Titkov, T Gurkova, N Panteleeva, T Chumakova, R Sabirov, S Aliferova, E Konoplev and I Michailova: Institute of Halurgy, Russia. ................................................................................. Vol 2:1063

Regularities in precipitate flotation in a column L O Filippov and I V Filippova: CNRS-INPL, France............................................................................ Vol 2:1072

A molecular modelling study of oleate monolayers adsorbed at calcium mineral surfaces

B Rai and Pradip: Tata Research Development & Design Centre, India. ............................................... Vol 2:1085

Hydrophobicity and flotation of quartz and feldspar in presence of monoalkyl of polyethylene glycol ethers

J Drzymala, E Mielczarski Y Duval and J Mielczarski: INPL/CNRS, France........................................ Vol 2:1094

The development of pneumatic flotation incorporating centrifugal separation R M Imhof, M J G Battersby, J V Brown, R M Lotzien and J Kleefeld: Maelgwyn Mineral

Services Limited, United Kingdom. .................................................................................................. Vol 2:1102

Ultrasound enhanced reactions at solid-liquid interfaces D Feng and J S J van Deventer: The University of Melbourne, Australia. ............................................. Vol 2:1116

The prediction of flotation reagents for ultra-fine coal flotation using surface chemestry techniques

S G de Jager and F W Petersen: Sastech Technology Research and Development, South Africa. ......... Vol 2:1127

Inert gas flotation technologies G L Simmons, J Gathje, W de Beer and R Moritz: Newmont Mining Corporation, USA...................... Vol 2:1134

Study on flotation of rare earth minerals by new collector DH L Che, Y Yu, X Wang and F Zhang: Wuhan University of Technology, China........................................... Vol 2:1143

Pilot applications of column flotation on copper re-cleaning A A Sirkeci, A Güney, G Bulut, O Kangal and G Önal: Istanbul Technical University, Turkey. .......... Vol 2:1151

Improved measurement technique for particle wettability S C Brown, R C G Oliveira and B M Moudgil: University of Florida, USA.......................................... Vol 2:1158

HYDRO- AND BIO-METALLURGY AND THE ENVIRONMENT Development and pilot plant testing of underground leaching of gold by chlorine

containing solutions A F Panchenko, V E Dementyev, O D Khmelnitskaya, V V Lodeischikov and T E Vidusov:

"IRGIREDMET" JSC, Russia. ......................................................................................................... Vol 3: 1168

A new technology for gold extraction from activated carbon after cyanidation S Ubaldini, R Massidda, C Abbruzzese and F Vegliò: Istituto per il Trattamento dei Minerali:

C.N.R., Italy....................................................................................................................................... Vol 3:1176

Rapid technique for the recovery / recycling of finely dispersed mercury from Philippine small-scale gold amalgamation effluent

H D Mendoza: University of the Philippines, Philippines....................................................................... Vol 3:1185

Selective sorption of nickel and cobalt from acid liquors using chelating resins F D Mendes, R S Costa and A H Martins: Companhia Vale eo Rio Doce, Brasil. ................................. Vol 3:1194

Redox potential dependence of chalcopyrite leaching N Hiroyoshi, M Tsunekawa, T Hirajima and H Miki: Hokkaido University, Japan. .............................. Vol 3:1203

Metal Removal: Crystallising the Problem A E Lewis and R van Hille: University of Cape Town, South Africa..................................................... Vol 3:1214

The influence of lead additions solution on the anodic behaviour of gold in alkaline aqueous cyanide

R F Sandenbergh, H Hutchison, T von Moltke and K P Cerovic: University of Pretoria, South Africa. ................................................................................................................................................ Vol 3:1222

A modelling study of the dynamics of sulphide heap leach processes with a view to improved and novel applications

J Petersen and D G Dixon: University of Cape Town, South Africa....................................................... Vol 3:1231

The control of calcium and magnesium in a base metal sulphate leach solution M Pelser, J J Eksteen, L Lorenzen and C Aldrich: University of Stellenbosch, South Africa. ............... Vol 3:1240

Equilibrium and kinetics of palladium adsorption on activated carbon H Kasaini and R Everson: Potchefstroom University, South Africa. ...................................................... Vol 3:1249

Acid decomposition of silver sulphide mineral during pressure oxidation of mixed sulphides

S P Bolorunduro, D B Dreisinger and Gus Van Weert: University of British Columbia, Canada. ......... Vol 3:1258

Silver recovery from zinc-lead-iron complex sulphides by pressure oxidation S P Bolorunduro, D B Dreisinger and Gus Van Weert: University of British Columbia, Canada. ......... Vol 3:1268

Mechanisms of Thiobacillus Ferrooxidans: Depressing the floatability of pyrite D Wei, Y Zhu, H Laing and Z Zhou: Northeastern University, China.................................................... Vol 3:1279

Bacterial desulphurization of coal from Jaworzno Mine P Fecko, P Ovcari, B Tora and H N Vu: VSB-TU Ostrava, Czech Republic. ........................................ Vol 3:1288

Development of an industrial bioreactor for mass culturing of UASB granules by process induction and microbial stimulation

E P Els, L Lorenzen, P J van Zyl and T J Britz: University of Stellenbosch, South Africa. ................... Vol 3:1295

Conditions for production of copper powder in a pipe reactor R D van der Weijden, W F C van Wageningen, and M A Reuter: Delft University of

Technology, The Netherlands. ........................................................................................................... Vol 3:1300

Hydrometallurgical processing of copper production dust Z S Abisheva, A N Zagorodnyaya, T N Bukurov, A S Sharipova and M Z Bitimbaev: Institute

of Metallurgy and Ore Benefication, Kazakhstan Republic. ............................................................. Vol 3:1308

Gold leaching by thiosulfate solution and recovery K-J Liu, A Shibayama W T Yen and T Fujita: Akita University, Japan. ................................................ Vol 3:1318

Bioleaching performance comparison between a series of mechanically agitated tanks and a bubble column

S Foucher, P d'Hugues, F Battaglia-Brunet and D H Morin: BRGM, France. ........................................ Vol 3:1327

Processing of arsenic bearing gold ores V A Luganov, G P Kluev, T V Chnyrenkova and J Troncoso: The K.I. Satpaev Kazakh

National Technical University, Kazakhstan Republic. ...................................................................... Vol 3:1335

Identifying and quantitating biological responses of sulfolobus to high pulp densities in the slurry bioleach reactor

S T L Harrison, A Sissing, S Raja and M Nemati: University of Cape Town, South Africa. ................. Vol 3:1344

Flotation tailing gold cyanidation of of a crystalline graphite ore located in Sierra de Max and Las Ramaditas, La Rioja, province Argentina

J C Videla, M Perez and Rosa Dzioba: Universidad Nacional de San Juan, Argentina. ......................... Vol 3:1355

PYROMETALLURGY The effect of temperature, oxygen potential and slag chemistry on the stability of

chromium spinels in melter slags in the base metals industry N Bartie, J Eksteen, S Jahanshahi and S Sun: CSIRO Minerals Division, South Africa......................... Vol 3:1364

Electrical conductivity of melter type slags R J Hundermark, S Jahanshahi, S Sun: South Africa. ............................................................................. Vol 3:1370

Thermodynamics of platinum in melter furnace mattes S Wright, S Jahanshahi and S Sun: CSIRO Minerals, Australia. ............................................................ Vol 3:1378

Combustion modelling of a rotary kiln for hazardous waste incineration Y Yang, M J A Pijenborg, M A Reuter and J Verwoerd: Delft University of Technology,

The Netherlands................................................................................................................................. Vol 3:1387

Modelling the inhomogeneous dead man of a blast furnace: the population balance model approach

J P Post, Y Yang and M A Reuter: Delft University of Technology, The Netherlands........................... Vol 3:1396

A generic approach to the development of semi-empirical predictive models for bath-type furnaces

J J Eksteen and M A Reuter: University of Stellenbosch, South Africa.................................................. Vol 3:1406

An experimental investigation of slag foaming of high FexO slags S A G Stadler, J J Eksteen and C Aldrich: University of Stellenbosch, South Africa............................. Vol 3:1416

Carbochlorination of rutile, titania slag and ilmenite in a bubbling fluidized bed reactor

J Nell and P den Hoed: MINTEK, South Africa. .................................................................................... Vol 3:1426

Carbothermic reduction of alumina into a metallic solvent phase H Eric and D Caizergues: University of the Witwatersrand, South Africa. ............................................ Vol 3:1434

Coal effects in combined direct reduction: Electrical smelting of iron ore P C Pistorius, Rossouw, K J J and J Sono: University of Pretoria, South Africa. ................................... Vol 3:1440

A one dimensional quasi-steady state model for the desulphurisation injection process at Saldanha Steel

E Scheepers, J J Eksteen and C Aldrich: University of Stellenbosch, South Africa. .............................. Vol 3:1448

SAFETY, HEALTH AND EDUCATION IN MINERAL PROCESSING Safety requirements and evaluation of health hazards in the processing of mineral and

waste materials G Gerke, A Pehlken and T Pretz: RWTH-Aachen, Germany. ................................................................ Vol 3:1460

The Western Cape Mineral Processing Facility D Deglon: University of Cape Town, South Africa. ............................................................................... Vol 3:1467

Maximising the value of a wealth of information R Morrison and A Scott: Julius Kruttschnitt Mineral Research Centre, University of

Queensland, Australia. ....................................................................................................................... Vol 3:1473

An effective global network for minerals education D Drinkwater, D McKee and D Howarth: The University of Queensland, Australia. ............................ Vol 3:1484

SIMULATION, CONTROL AND MODELLING OF MINERAL PROCESSES Visualisation of the process of raw materials separation in the separator with

ferromagnetic liquid M Brozek and W Pawlos: University of Mining & Metallurgy, Poland. ................................................ Vol 3:1494

Simulation of reagent performance of the pyrrhotite rejection Strathcona Mill S Kelebek, D Beckett, J Caceres and A Khan: Queen’s University, Ontario, Canada. ........................... Vol 3:1504

Continuous monitoring of a tumbling mill K T Tano, B I Pålsson and S V Persson: LKAB (Research and Development), Sweden. ...................... Vol 3:1514

Case studies of models of tube mill and air separator grinding circuits H Benzer, L Ergun, A J Lynch and M Oner: Hacettepe University, Turkey. ............................................... Vol 3:1524

Real-time, condition management of critical plant equipment and processes R Hope, F Malan and D Moolman: Crusader Systems, South Africa. .................................................... Vol 3:1534

Duel energy x-ray transmission imaging for concentration and control of solids T P R de Jong, W L Dalmijn and H U R Kattentidt: Delft University of Technology, The

Netherlands. ....................................................................................................................................... Vol 3:1542

Computer controlled hydrocyclone battery with maximum solids recovery T Neesse, M Schneider, J Dueck, F Donhauser, J Regler and H Tiefel: Department of

Environmental Process Engineering and Recycling, Germany.......................................................... Vol 3:1552

3D Analysis of particulates in mineral processing systems by cone beam X-Ray microtomography

J D Miller and C L Lin: University of Utah, USA. ................................................................................. Vol 3:1561

Improving mine and metallurgical performance using: Data unification and measurement management

O A Bascur and J P Kennedy: OSI Software, Inc., USA. ....................................................................... Vol 3:1571

Mintek’s process control tools for milling and flotation control J J Louw, D G Hulbert, V C Smith, A Singh and G C Smith: MINTEK, South Africa.......................... Vol 3:1581

Cyanide: oxygen ratio for leaching gold in sulphide ores J A Rumball and M R Houchin: CSIRO Minerals, Australia.................................................................. Vol 3:1590

An online expert for minerals processing plants D de V van der Spuy, DG Hulbert, DJ Oosthuizen, and B Muller: MINTEK, South Africa. ................. Vol 3:1594

A high fidelity simulation study of the complex interactions between wear and breakage in tumbling mills

J P Herbst, X Qiu and M Song: Metso Minerals Optimization Services, USA....................................... Vol 3:1603

The use of DEM in predicting grinding rate M M Bwalya and M H Moys: University of the Witwatersrand, South Africa....................................... Vol 3:1612

Computer simulation of iron ore agglomeration process in rotating drums K Sastry and A Prasad: University of California at Berkeley, USA........................................................ Vol 3:1618

Analysis and identification of mineral process plants by use of singular spectrum analysis and neural networks

C Aldrich and M Barkhuizen: University of Stellenbosch, South Africa................................................ Vol 3:1627

Fundamental prediction of particle separation on a simple sluice G J Lyman, A Majumder, P N Holtham and M Brennan: Julius Kruttschnitt Mineral Research

Centre, University of Queensland, Australia. .................................................................................... Vol 3:1638

DEM as a tool for design and optimisation of mineral processing equipment P W Cleary: CSIRO, Australia. ............................................................................................................... Vol 3:1648

Influence of on-stream elemental analysis speed and accuracy to flotation process control

M Kongas, A Remes and K Saloheimo: Outokumpu Technology, Finland............................................ Vol 3:1658

Scale-up for gas-liquid-solids processes in continuous flow J Y Oldshue: Oldshue Technologies, Inc., Rochester, USA.................................................................... Vol 3:1668

Equilibrium models for biosorption in single and multi-metallic systems: A case study by using several bio-sorbent materials

F Veglio, F Beolchini, F Pagnanelli, L Toro and S Ubaldini: Universita degli Studi di L'Aquila, Italy. ................................................................................................................................................... Vol 3:1673

A CFD simulation of the hydrodynamics of a reactor with and without a draft tube A Ochieng, H Pearce and A E Lewis: University of Cape Town, South Africa. .................................... Vol 3:1682

Model predictive control in the minerals processing industry B Muller, A Singh, D de V van der Spuy and V C Smith: MINTEK, South Africa. .............................. Vol 3:1692

Measurement of gas velocity in industrial flotation cells C Gomez, J Torrealba-Vargus, R Dahlke and J Finch: McGill University, Canada. .............................. Vol 3:1703

WASTE TREATMENT AND MANAGEMENT Closed loop recycling of nickel, cobalt and rare earth metals from spent nickel-metal

hydride-batteries H Heegn, B F T Muller and R Weyhe: UVR-FIA GmbH, Germany. ..................................................... Vol 3:1713

Utilisation of complexation on removal of cadmium from soil by electrokinetic method M Niinae and K Aoki: Kyoto University, Japan. .................................................................................... Vol 3:1723

Sustainability, environmental rheology and full cost accounting of tailings disposal B C Ruse, F Sofra and D V Boger: The University of Melbourne, Australia. ........................................ Vol 3:1732

Bioremediation of polluted waters in a uranium deposit S N Groudev, I I Spasova, K Komnitsas and I Paspaliaris: University of Mining and Geology,

Bulgaria. ............................................................................................................................................ Vol 3:1742

The economic and environmental case for recovering cyanide from gold plant tailings C A Fleming: SGS Lakefield Research Limited, Canada........................................................................ Vol 3:1748

Middle-low grade phosphate beneficiation and recycling of flotation wastewater in China

K N Zhong, Y H Wei, H H Luo, Y L Wang, Y J Li and Z N Bai: University of Pretoria, South Africa....................................................................................................................................... Vol 3:1759

The role of product design and liberation in the optimisation of recycling passenger vehicles

A van Schaik, M A Reuter, B Castro and H Remmerswaal: Delft University of Technology, The Netherlands................................................................................................................................. Vol 3:1768

A dynamic model of metal production and waste management E V Verhoef, M A Reuter, A Scholte and G P J Dijkema: Delft University of Technology,

The Netherlands................................................................................................................................. Vol 3:1778

The immobilisation of organic waste by geopolymerisation C Gokhale, L Lorenzen and J S J van Deventer: University of Stellenbosch, South Africa. .................. Vol 3:1789

The effect of coprecipitant on the removal of As5+ by adsorbing colloid flotation A C C Pacheco and M L Torem: Catholic University of Rio de Janeiro, Brasil. .................................... Vol 3:1797

Development of a processing system of shredded automobiles residues T Furuyama, A Bissombolo, S Mori, M Hata, Y Koga and T Ikejiri: Kyushu University, Japan........... Vol 3:1805

Treatment of acid mine drainage through chemical precipitation C Laubscher, F W Petersen and J P Smit, MINTEK, South Africa......................................................... Vol 3:1814

Beneficiation techniques for the production of battery grade manganese concentrate from mine waste dumps (Dongri Buzurg Manganese Mine, India)

A T Sutaone: Indian Bureau of Mines, India........................................................................................... Vol 3:1821

Applicability of solid anaerobic digestion sludge of the lignocellulose to soil conditioning

B C Qi, L Lorenzen, C Aldrich and G M Wolfaardt: University of Stellenbosch, South Africa. ........... Vol 3:1826

Recycling and reutilization of cast iron foundry wastes M C Zanetti, S Fiore and C Clerici: Polytechnic of Turin, Italy. ............................................................ Vol 3:1836

Effective design of tailing pond size for the management of iron ore tailings in Indian context

M K Ghose and P K Sen: Indian School of Mines, India. ....................................................................... Vol 3:1846

Iron precipitation in sulphuric acid under pressure oxidation conditions at elevated temperatures

R C Maluleke, FW Petersen, A Nesbitt, J H Marsh and J deT Steyl: MINTEK, South Africa............... Vol 3:1852

ABSTRACTS FROM NON-REFEREED PAPERSOnline process modelling for SAG mill control using temperature measurements,

energy balancing and inferential parameter estimation W I van Drunick and M H Moys: University of the Witwatersrand, South Africa.

Results of the research work and technical solutions in the comminution process of Majdanpek Copper Mine, Yugoslavia

M Grujic, D Salatic and V Grujie: University of Belgrade, Yugoslavia.

Preparation of plastics for automatic identification as the first step in recycling of automotive parts

C Stollberg, P Ay and M Schmidt: Brandenburg University of Technology Cottbus, Germany.

On-line ultrasonic slurry particle size analysis system P J Coghill, M J Millen, B D Sowerby and K D Cunningham: CSIRO Minerals, Australia.

Optimising control of SAG Mills at Anglogold’s Mponeng Mine M Ruthnasamy, O Guyot, C Bouché and W van Drunnick: M Minerals (Pty) Ltd, South Africa.

Recovery of enriched grade iron ore fines from washing plant waste (slime) at Dalli Mines of Bhilai Steel Plant

M P Srivastava, S K Pan and N Prasad: RDCIS, SAIL, India.

Zinc oxide flotation process using CPS technique J Tian: BHP Billiton Johannesburg Technology Centre, South Africa.

Supasim: A methodology to predict flotation plant performance from laboratory tests M P Hay and C M Rule: Eurus Mineral Consultants, South Africa

Mineral recovery modelling in separation processes: Use of particle data P Lamberg and J Liipo: Outokumpu Research Oy, Finland.

Optimization of plant performance at North American Palladium’s Lac Des Iles Mill using intergrated metallurgical and mineralogical (QEMSCAN) testing

C J Martin and N A Mckay: SGS Lakefield Research, Canada.

Digital imaging method for bubble size determination in three-phase systems R A Grau and K Heiskanen: Helsinki University of Technology, Finland.

Solids loading in mineral flotation froths E Ventura-Medina, N Barbian and J Cilliers: Department of Chemical Engineering, UMIST,

United Kingdom.

Physicochemical behavior of chromite and olivine during flotation with anionic collectors

G N Anastassakis: National Technical University of Athens (N.T.U.A.), Greece.

Detailed modelling of the froth phase in batch flotation M H Moys and B K Williams: University of the Witwatersrand, South Africa.

Development of a flow sheet for nickel ore from Orhaneli (Turkey) A E Yüce, G Bulut, F Boylu, H M Tarkan, V Gürkan, G Önal: Istanbul Technical University,

Turkey.

Where is the depressant? T de Gouw and R Smeink: Akzo Nobel Functional Chemicals, Holland.

Adsorption of sodium oleate onto spinel oxides Raquel Franco de Souza Lima and Isao Matsuoka: Universidade Federal do Rio Grande do Norte,

Brasil.

An innovative process for the recovery of PGM’s from panton ore J D Lewins and A Bax: Platinum Australia Limited, Australia.

The first biooxidation plant in China: Yantai Gold Smeltery S Yang, J Xie, Z Zhu, G Qiu and Y Hu: China Nonferrous Engineering & Research Institute

(ENFI), China.

Development of gold extraction technology at base metals ore processing E L Chanturiya, V A Bocharov and R A Amosov: Moscow State Mining University, Russia.

A study of factors influencing the kinetics of atmospheric leaching of converter matte R M Lamya and L Lorenzen: University of Stellenbosch, South Africa.

Catalytic recovery of SO2 from electric furnace off gasses at Impala Platinum J H Kruger: Impala Platinum, South Africa.

Hydrothermal synthesis and reaction mechanism of zeolite from coal fly ash in the presence of various alkali sources

J Shibata, H Yamamoto and N Murayama: Kansai University, Japan.

Quality dimensions of mining's best practice hearing protection defined Johan F W Kock: Noise Clipper, South Africa.

Mathematical modelling of jig bed stratification S P Mehrotra and B K Mishra: National Metallurgical Laboratory (CSIR), India.

Study on the application of neural networks in flotation process modelling C Sun, J Zhou and F Wang: Beijing General Research Institute of Mining & Metallurgy,

China.

Using DEM to model ore breakage within a pilot scale SAG mill R D Morrison and P W Cleary: CSIRO, Australia.

Life cycle assessment in multi-product metals refining: A project planning support tool H von Blottnitz, J Broadhurst and J G Petrie: University of Cape Town, South Africa.

POSTERS Mineral composition, structure, and metallurgical properties of iron-ore pellets with

broad range of the chemical composition Zhuravlev, F.M., Lyalyuk, V.P. and Severnyuk, V.V.

Dependencies between grain sizes analyses results obtained by various methods Peszko, B. and Tumidajski, T

Quality assurance and sampling methods regarding municipal solid waste Pehlken, A. and Pretz, T.

The behavior of covellite during the anodic polarization Rajcic-Vujasinovic, M.M., Stankovic, Z.D. and Stevic, Z.M

Stereological conversion from linear and areal grade distribution measurements Neumann, R. and Schneider, C.L.

Structural-сhemical transformations of minerals at mechanical activation and their role in technological processes (on the example of саssiterite)

Yusupov, T.S., Kirillova, E.A. and Schumskaya, L.G.

Mossbauer study of iron sulphides in mining ores Pax, R.A., Knights, J., Harker, S.J. and Stewart, G.A.

Effects of water quality on performance of bentonite binders in iron ore pelletization Ripke, S.J., Eisele, T.C.and Kawatra, S.K

Research on the selective grinding behaviors of diaspore type bauxite Han, Y., Yin, W., Wang, Z., Yu, F. and Wei, X

The investigations of communition processes by the method of finite mixture grain size distributions

Tadeusz, T. and Krzysztof, P.

Usage of correlation between liberation parameters and conditions of separation of minerals for reaching maximal technological efficacy of the mineral processing

Karmazin, V.V.

Predicting the contributionof impact wear to total steel media consumption Radziszewski, P. and Thakur, L.K.

Disintegration of rock by electric discharge impulses Shuloyakov A.D., Finkelstein G.A., Kurets V.I. and Vedin A.K.

Power and mineral resources saving technology involved in ore preconcentration based on the use of vibrating crushing and grinding machinery

Vaisberg L.A.

Fragmentation of ore and solid waste by means of electrical disintegration and disintegration by underwater explosion

Shibayama, A., Miyazaki, T., Murata, K., Fujita, T. and Svoboda, J.

Lifting power and structure of two-phase streams in gravity separation regimes Barsky, E., Barsky, M. and Govorov, A

Sorting of secondary aluminium by automatic picking Mutz, S., Julius, J., Pretz, T., Harbeck, H., Hilbk-Kortenbruck, F. and Makowe, J.

The use of optical sorting devices in mineral processing Wotruba, H., Riedel, F. and Petzold, G

Impact behavior in grinding mills and by dem Dong, H. and Moys, M.H.

Formation conditions of density current and its influence on thickening efficiency Chen, S. and Yao, Z.

Slon vertical ring and pulsating high gradient magnetic separator applied in china Xiong, D.

The effect of vibrating milling on chromite dissolution Dincer, H., Onal, G. and Gock, E.

Re-processing of the chromite concentration tailings and description of a new beneficiation method

Güney, A. and Önal, G.

Mineral engineering – a qualitatively new stage of development of processing and further utilization of mineral raw materials

Sztaba, K.S.

Mongolian fluorspar ore mining and processing rational technological schemes development Kutlin, B.A., Baddamsuren, X. and Zimin, A.B

Development of efficient flowsheets and reagent addition conditions for flotation of refractory sulphide ores containing non-ferrous and precious metals

Tarasov, A.V., Mantsevich, M.I. and Khersonskaya, M.I.

Effective technologies and modular plants for processing of ores of rare and noble metals Beloborodov, V., Fedotov, K. and Potyomkin, A

Innovation processes and device for processing of industrial minerals, mica, diamonds based electric pulse disintegration: design and testing

Usov, A.F. and Tsukerman, V.A.

Mössbauer and sem results on iron minerals in coal, weathered coal and coal ash Waanders, F.B., Mans, A., Vinken, E. and Kgabi, N. (64) 410

The application of cyclones in heavy mineral processing Bosman, J. and Lourens, N.

Influence of metals on diamond to graphite phase transformation Nozhkina, A.V.

Measuring the resistivity of titanium minerals in a corona field Ng, M.M. and Holtham, P.N.

Elimination of apatite from hematite in chador-malu iron ore Hosseiny, N.R. and Bassir, S.H.

Reduction foreign substance K, Na and Si from iron minerals Che, L., Yu, Y., Zhang, F. and Zhang, J

Application of Ultrasonic to Enhance Sedimentation of Kaolin Özer, M., Arslan, F. and Önal, G

Beneficiation techniques of the fine size colemanite tailings Önal, G. and Güney, A.

Suitability of feedstocks for the sasol-lurgi fixed bed dry bottom gasification process van Dyk, J.C., Keyser, M.J. and van Zyl, J.W

Effects of applying different frother structures in copper flotation plant Majdanpek – Yugoslavia

Grujic, M., Riggs, W., Djurkovic, I. and Grujic, V.

Experimental pros and cons to the theories of bubble-particle interactions: progress in the past two decades

Vigdergauz, V.E.

Study on the adsorption behaviors of metal ions and the floatability of the silicate minerals Jia, M.

Study on the relationship between the surface characteristics and floatabilities and their crystal structures of the silicate minerals

Sun, C. and Jia, M.

New reagent application at sulfide-barite ores flotation for recirculation water conditioning Asonchik, K.M. and Ryaboy, V.I.

Study of the adhesion forces between particles and air bubbles Schreithofer, N. and Heiskanen, K.

Mineral and molecular design of flotation reagents Nazarov, J.P.

The ores flotation by bubbles containing surficant films Solozhenkin, P.M., Nebera, V.P. and Skorohodov, V.D.

Predicting wet foam coalescence and drainage from two-bubble interaction experiments Neethling, S.J., Cilliers, J.J., Spyridopolous, M.T. and Simons, S.J.R

Flotation technology for concentration of tantalum, niobium and tin minerals from refractory low-grade products

Kurkov, A.V., Shatalov, V.V. and Pastukhova, I.V.

Ways to reduce metals losses in coarse and fine ore fraction during flotation Maksimov, I.I., Yemelyanov, M.F., Koltunova, T.E. and Otrozhdyonnova, L.A.

Industrial flotation circuit design using the floatability characterisation test rig Coleman, R.G., Franzidis, J.P. and Manlapig, E.V

Study on selective flotation of lead and zinc oxides with chelate cf-collector Li, C. and Tan, X.

Flotation mass loaded of metals Solozhenkin, P.M., Nebera, V.P., Zouboulis, A.I. and Matis, K.A.

Study on flotation of fluorite from calcite, barite using new reagents Che, L., Yu, Y., Yuan, J., Cao, M. and Wang, X

Ammonium sulphate as promoting agent of the sulphidization process of cu-co oxides ores from the luiswishi deposit (D.R.C.)

Bastin, D. Frenay, J. and Dassas, J.

Collector screening by tof-ms for platinum and palladium flotation Chryssoulis, S., Dimov, S. and Cappuccitti, F

Flotability of free gold at Kemess Chryssoulis, S., Venter, D. and Stowe, K

Lead recycling from automotive batteries: An hydrometallurgical case study de Araújo, R.V.V., Trindade, R.B.E. and Fica-Piras, P.R.

Factors affecting the level of available P2O5 in partially acidulated phosphate rock from chilembwe phosphate deposit of Zambia

Chileshe, F., Simukanga, S. and Nkonde, G.K

Biohydrometallurgical processing of refractory gold-arsenic concentrate with large content of pyrrhotite by using combined autotrophic bacterium

Sedelnikova, G.V., Aslanukov, R.Y., Savari, E.E., Karavaiko, G.I., Kondrateva, T.F. and Pivovarova, T.A.

An investigation into the precipitation of nickel(II) and cobalt(II) as sulphides Swartbooi, A.M., van Hille, R. and Lewis, A.E.

Copper sulphide precipitation: Where theory meets reality Peterson, K., Lacour, S., van Hille, R. and Lewis, A.E.

The studies on carbon adsorption technology for precious metals recovery Voiloshnikov, G.I.

Influence of the addition of sr on the aspect ratio of aragonite in Ca(OH)2-CO2-H2O system Ahn, J.W., Kim, H.S., Joo, S.M., Kim, J.P., Kim, K.H., Kim, H. and Cho, H.C.

A novel process of recovery tungsten and vanadium from a leached solution of tungsten scrap Lin, L., Miyazaki, T., Shibayama, A. and Fujita, T

The kinetics of thermophilic ferrous iron oxidation Searby, G.E. and Hansford, G.S.

An investigation of the thermophilic bioleaching of pyrite Searby, G.E. and Hansford, G.S.

Preconcentration of Küre-Aşiköy low grade copper ore Gül, A. and Önal, G.

The interaction of oxide zone copper minerals and gangue during leaching: A geometallurgical and experimental perspective

Helle, S. and Kelm, U.E.D.

Gekko systems: Inline leach reactor Heins, R.A. and McCallum, A.D.

Intensification of non-ferrous turnings preparation for metallurgical processing Bredikhin, V.N., Shevelev, A.I., Kazban, E.A. and Kostjuk, V.V.

Optimal recovery of base metals from waste slag in the laboratory dc arc furnace Banda, W., Beukes, N.T. and Eksteen, J.J

Scale-up methods of dense slurry production by propeller and flow technique mixers Tarján, I. and Faitli, J.

Conditions of optimality for process of separation of pourable materials Barsky, E.

Perspective new ecologically safe technologies for rare-metal and gold-bearing ores dressing Mineev, G.G., Bogidaev, S.A., Punishko, O.A., Belousova, O.V., Malova, M.V.

and Kursinov, I.I.

Improvement achieved by the world bank financed project for chemical engineering education in indonesia

Adisasmito, S.

Use of practical correlation equations for statistically determining specific surface area values using one of four given methodologies and predicting the correspondent results of the other three methods

Lins Gonçalves, M.V. and Maffei, A.C

An adaptation-determination control of selective flotation of nonferrous metals Avdokhin, V., Morozov, V. and Stolyarov, V

The application of block diagrams and transmittance for simulating analysis of mineral processing complexity technological systems

Trybalski, K.

Modelling of complex technological processes and material processing systems by use of neural networks

Tadeusiewicz, R., Trybalski, K. and Wszoek, W.

Topology of a computer-supported system for remote monitoring and management of flotation in the copper mine "Veliki Krivelj", Bor, Yugoslavia

Vujic, S.B.

Imitation modeling of the development of concentrating mills Zharov, V.S. and Tsukerman, V.A.

A computer system for integrated monitoring and management of business activities and production processes of the mine and flotation in the mining company "Rudnik", Yugoslavia

Vujic, S.B.

Modelling of copper sulphide/electrolyte systems as a potential material for supercapacitors Stevic, Z.M., Rajcic-Vujasinovic, M.M. and Stankovic, Z.D

Modelling the process of noble metal autoclave desorption from carbons in a stationary sorbent layer

Elshin, V.V., Golodcov, Y.A. and Raschenko, A.F

Dynamic modelling of the resource cycle of passenger vehicles van Schaik, A. and Reuter, M.A

A “checking system” for circuit control and grade estimation in fluorite flotation plants Bissombolo, A., Furuyama, T. and Mori, S

Hybrid and optimal control of complex mineral and metallurgical processes Lange, T.B., Botha, J. and de Clerk, N

CFD simulation of DC electric arc furnace Kolesnikov, A

Case study on application of advanced flotation simulation to determine optimum reagent dosage

Bennett, C.A., Bulled, D.A. and Dobby, G.S.

Environmentally sound technology for processing of domestic solid waste and other toxic waste in sparged molten slag

Tarasov, A.V.

Treatment of sulphide containing wastes by surface passivation: application to acid mine drainage prevention

Filippova, I.V., Filippov, L.O. and Yvon, J

Soil washing for remediation of non volatile hydrocarbon polluted soils Belardi, G., Shehu, N. and Passeri, L.

Theoretical aspects and practical using of galvano-chemical process of sewages cleaning Solozhenkin, P.M.

Effects of ultrasound on the removal of humic acids with the preformed aluminium hydroxide flocs

Qi, B.C., Aldrich, C. and Lorenzen, L

Waste treatment management in the North-Western Russia Vinogradov, A.N. and Tsukerman, V.A.

Surface – chemical modification technique for the separation of colloidal amorphous silica from geothermal effluent

Mendoza, H.D. and Sasaki, H

Manufacture of OPC using waste sludge generated at Posco Ahn, J.W., Kim, H.S., Han, G.C., Cho, J.S., Han, K.S., Kim, M.S. and Oh, J.H.

Implications of slow atmospheric chromium oxidation for the disposal of smelter slags and finishing plant sludges

von Blottnitz, H. and Petersen, J

Design of recycling and reprocessing technologies for end-of life metals-containing materials Stewart, M., Suljada, T., Giurco, D. and Petrie, J.G

Water in the design context: a focus on base metals refining Marr, S.M. and Petrie, J.G.

The application of life cycle assessment to mining and minerals Stewart, M., Brent, G. and Petrie, J.G.

Synthetically utilization of radioactive waste dregs Che, L., Yu, Y., Zhang, F. and Wang, X.

Cyanide destruction and waste water management Mudge, M.

Design, materials combinations and recycling

Castro, M.B.G., Remmerswaal, J.A.M., Reuter, M.A. and Boin, U.

AUTHORS INDEX Abbruzzese, C. Abisheva, Z.S. Acarkan, N. Addai-Mensah, J. Adisasmito, S. Ahmed, N. Ahn, J.W Ahn, J.W Aldrich, C. Aldrich, C. Aldrich, C. Aldrich, C. Aldrich, C. Aldrich, C. Alexandrova, L.B. Aliferova, S. Amosov, R.A. Anastassakis, G. Anastassakis, G.N. Ando, T. Antonini, P. Aoki, K. Arafa, M.A. Arslan, F. Aslanukov, R.Y Asonchik, K.M. Ata, S. Avdokhin, V Avdokhin, V. Ay, P. Baddamsuren, X. Bai, Z.N. Banda, W Banerjee, B. Barbian, N. Barbian, N. Barker, D.G. Barkhuizen, M. Barsky, E Barsky, E. Barsky, E. Barsky, M. Barsky, M. Bartie, N. Bascur, O.A. Bassir, S.H. Bastin, D. Battaglia-Brunet, F. Batterham, R.B. Battersby, M.J.G. Bax, A. Beckett, D. Belardi, G Belardi, G. Beloborodov, V Belousova, O.V Benkli, Y.E.

Bennett, C.A Benzer, H. Beolchini, F. Berkowitz, G. Beukes, N.T. Bevilacqua, P. Bhat, K.H. Bhattacharyya, P. Bissombolo, A Bissombolo, A. Bitimbayev, M.Z. Bocharov, V.A. Boger, D.V. Bogidaev, S.A Boin, U.M.J. Boin, U.M.J. Bolorunduro, S.A. Bolorunduro, S.A. Bosman, J. Botha, J. Bouajila, A. Bouché, C. Boulton, A. Boylu, F. Bradshaw, D. Bradshaw, D. Bradshaw, D.J. Bradshaw, S. Bredikhin, V.N Brennan, M Brennan, M.S. Brent, G. Britz, T.J. Broadhurst, J. Broicher, H.F. Brown, J.V. Brown, S.C. Brown, S.C. BrożekM. Bruckard, W.J. Buchanan, A. Bukurov, T.N. Bulled, D.A. Bulut, G. Bulut, G. Bulut, G. Bunin, I.J. Burdukova, L. Bwalya, M.M. Cabri, L.J. Caceres, J. Caizergues, D. Campbell, J.J. Cao, M. Capponi, F. Cappuccitti, F Castro, B.

Cerovic, K.P. Chakrabarti, D.M. Chanturiya, E.L. Chanturiya, V.A. Chanturiya, V.A. Che, L Che, L Che, L Che, L. Chen, H.L. Chen, S. Chileshe, F Chnyrenkova, T.V. Cho, H.C. Cho, J.S Choi, S-K. Chryssoulis, S Chryssoulis, S Chumakova, T. Chung, H-S. Cico, S. Cilliers, J.J.Cilliers, J.J Cilliers, J.J. Cilliers, J.J. Cleary, P.W. Cleary, P.W. Clerici, C. Clermont, B. Coghill, P.J. Coleman, R.G Collings, A. Costa, R.S. Cramer, L.A. Csőke, B. Cunningham, K.D. Dalhke, R. Dalmijn, W.L. Dalmijn, W.L. Das, P.N.M. Dassas, J. Davey, C. Davey, K.J. Davidtz, J.C. de Araújo, R.V.V de Beer, W. de Bono, S.K. de Clerk, N de Gouw, T. de Jager, G. de Jager, S.G. de Jong, T.P.R. de Jong, T.P.R. de Lorenzi, L. de Souza Lima, R.F. de T. Steyl, J. de Vaux, D.

de Vaux, D. Dec, R.T. Deglon, D. Dementyev, V.E. Demi, G. den Hoed, P. Denisov, G.A. D'Hugues, P. di Giovanni, S. Dijkema, G.P.J. Dimov, S. Dincer, H Dixon, D.G. Djordjevic, N. Djurkovic, I. Dobby, G.S. Doğan, Z. Dong, H. Donhauser, F. Dreisinger, D. Dreisinger, D.B. Dreisinger, D.B. Drinkwater, D. Drzymala, J. du Plessis, R. Dueck, J. Duval, Y. Dzioba, R. Eisele, T.C. Eisele, T.C. Eksteen, J. Eksteen, J.J Eksteen, J.J. Eksteen, J.J. Eksteen, J.J. Eksteen, J.J. Eksteen, J.J. El Salmawy, M.S. Els, E.R. Elshin, V.V Ergun, L. Eric, H. Evans, G.M. Everson, R. Faitli, J. Faitli, J. Farmer, A. Farrow, J.B. Fawell, P.D. Fecko, P. Fedorov, A.A. Fedotov, K. Feng, D. Fica-Piras, P.R. Filippov, L.O. Filippov, L.O. Filippova, I.V

Filippova, I.V. Finch, J. Finch, J.A. Finch, J.A. Finkelstein G.A Fiore, S. Fleming, C.A. Focke, W.W. Fornasiero, D. Fornasiero, D. Forsling, W. Forssberg, E. Foucher, S. Franzidis, J.P. Franzidis, J.P. Franzidis, J.P. Franzidis, J-P. Frenay, J. Fu, P-H. Fuerstenau, D.W. Fujita, T Fujita, T. Fujita, T. Fujita, T. Furuyama, T. Furuyama, T. Furuyama, T. Gathje, J.C. Gay, S. Gerke, G. Ghiani, M. Ghiani, M. Ghose, M.K. Giurco, D. Giurco, D. Gock, E. Gock, E. Gokhale, C. Golodcov, Y.A. Gomez, C. Govender, I. Govorov, A Grano, S. Grau, R.A. Grigorov, L.S. Groudev, S.N. Grujic, M Grujic, M. Grujic, V. Grujie, V. Guerrero, C.P. Guimarães, R.C. Gül, A. Gulyaev, Y.V. Guney, A. Güney, A. Güney, A. Gürkan, V. Gurkova, T. Guyot, O. Han, G.C Han, K.S Han, Y

Hankey, D. Hansford, G.S. Hansford, G.S. Harbeck, H Harbort, G.J. Harker, S.J. Harris, M.C. Harris, P. Harris, P.J. Harrison, S.T.L. HarveyP.A. HashemiA. Hashiguchi, N. Hata, M. Hatfield, D. Hatvani, Z. Hay, M.P. Heegn, H. Heinrich, G.S. Heins, R.A. Heiskanen, K. Heiskanen, K. Helle, S. Herbst, J.A. Heyes, G. Hilbk-Kortenbruck, F. Hinde, A.H. Hirajima, T. Hiroyoshi, N. Hjelen, J. Hocking, R. Holmes, R.J. Holtham, P.N. Holtham, P.N. Holtham, P.N. Hope, R. Hosseiny, N.R. Houchin, M.R. Howarth, D. Hu, Y. Huang, P. Hulbert, D.G. Hulbert, D.G. Hulbert, D.G. Hundermark, R.J. Hutchison, H. Ibrahim, S.S. Ikejiri, T. Imhof, R.M. Indi, S.S. Ingerttilä, K.T. Inoue, T. Ito, M. Ivanova, T.A. Jackson, K. Jahanshahi, S. Jahanshahi, S. Jahanshahi, S. Jameson, G.J. Jameson, G.J. Jia, M. Jia, M. Jia, X.

Joo, S.M Julius, J Kallioinen, J.O. Kangal, O. Kangal, O. Kanjorski, P. Karavaiko, G.I Karmazin, V.V. Kasaini, H. Kattentidt, H.U.R. Kawatra, S.K Kawatra, S.K. Kazban, E.A. Kelebek, S. Kelm, U.E.D. Kennedy, J.P. Keyser, M.J. Kgabi, N. Khalek, M.A.A. Khan, A. Khersonskaya, M.I. Khmelnitskaya, O.D. Kim, B-G. Kim, H. Kim, H.S Kim, H.S Kim, J.P Kim, K.H Kim, M.S. King, R.P. Kingman, S. Kirillova, E.A. Kleefeld, J. Kleingeld, A.W. Kluev, G.P. Knights, J Kochnev, V.G. Kock, J.F.W. Koga, Y. Kolesnikov, A Koltunova, T.E. Komarek, R.K. Komnitsas, K. Kondrateva, T.F. Kongas, M. Konoplev, E. Kostjuk, V.V. Kota, H.R. Kota, H.R. Kovlekov, I. Kruger, J.H. Krzysztof, P. Kurets V.I. Kurkov, A.V Kursinov, I.I. Kusaka, E. Kutlin, B.A Kuyumcu, H.Z. Kwela, Z. Lacour, S Lalloo, S. Lamberg, P. Lamya, R.M.

Lange, T.B Larsen, E. Lashkul, A.V. Laskowski, J.S. Lastra, R. Latti, D. Laubscher, C. Lee, J-J. Lehto, H.J. Leinum, J.R. Leppinen, J.O. Lewins, J.D. Lewis, A.E Lewis, A.E. Lewis, A.E. Lewis, A.E. Li, C. Li, Y.J. Liang, H. Liipo, J. Lin, C.L. Lin, L Lins Gonçalves, M.V. Liu, K-J. Lodeischikov, V.V. Lorenzen, L Lorenzen, L. Lorenzen, L. Lorenzen, L. Lorenzen, L. Lorenzen, L. Lorenzen, L. Lotzien, R.M. Lourens, N. Louw, J.J. Loveday, B.K. Luganov, V.A. Lukey, G.C. Lunin, V.D. Luo, H.H. Lux, J. Lyalyuk, V.P. Lyman, G.J. Lyman, G.J. Lynch, A.J.

Maffei, A.C Mainza, A. Majumder, A. Makni, S. Makowe, J. Maksimov, I.I Malan, F. Malova, M.V. Maluleke, R.F. Malvik, T. Malysiak, V. Malysiak, V. Manhique, A. Manlapig, E.V Manlapig, E.V. Manlapig, E.V. Manlapig, E.V.

Manlapig, E.V. Manni, A. Manouchehri, H.R. Mans, A Mans, A. Mantsevich, M.I. Marr, S.M. Marsh, J.H. Martin, C.J. Martins, A.H. Massacci, P. Massidda, R. Matiolo, E. Matis, K.A. Matsuoka, I. Matveyeva, T.N. Mazurkiewicz, M. McBride, A.T. McCallum, A.D. Mckay, N.A. McKee, D. Mehrotra, S.P. Mendes, F.D. Mendoza, H.D. Mendoza, H.D. Michailova, I. Mielczarski, E. Mielczarski, E. Mielczarski, J. Mielczarski, J.A. Miki, H. Miles, N. Millen, M.J. Miller, J.D. Miller, J.D. Mineev, G.G Mirnezami, M. Mishra, B.K. Mittoni, L. Miyazaki, T Miyazaki, T Moen, K. Mohanty, O.N. Monaghan, A.J. Montanari, F. Moolman, D. Mori, S Mori, S. Mori, S. Morin, D.H. Moritz, R. Morozov, V. Morrell, S. Morrell, S. Morrison, R. Morrison, R.D. Moudgil, B.M. Moudgil, B.M. Moys, M.H. Moys, M.H. Moys, M.H. Moys, M.H. Mpofu, P.

Mudge, M. Mukherjee, T. Muller, B. Muller, B. Müller, B.F.T. Murata, K Murayama, N. Mutz, S Mwale, A.H. Nagaraj, D.R. Napier-Munn, T. Natarajan, K.A. Natarajan, K.A. Nazarov, J.P. Nebera, V.P Nebera, V.P. Nedosekina, T.V. Neesse, T. Neethling, S.J Neethling, S.J. Nell, J. Nemati, M. Nenno, V.E. Nesbitt, A. Nesbitt, A.B. Neumann, R. Neumann, R. Ng, M.M. Nguyen, T.V. Nguyen, A.V. Niinae, M. Nishimura, T. Nkonde, G.K Nozhkina, A.V. Nunes, D.G. O’Connor, C.T. O’Connor, C.T. Ochieng, A. Oh, J.H. Oja, M.I. Okaya, K. Okuma, T. Oldshue, J.Y. Oliveira, R.C.G. Olson, T.J. Önal, G Onal, G. Onal, G. Önal, G. Önal, G. Önal, G. Önal, G. Önal, G. Önal, G. Oner, M. Oosthuizen, D.J. Ota, T. Otrozhdyonnova, L.A. Ovčaří, P. Owada, S. Özer, M Özer, M. Pacheco, A.C.C.

Pagnanelli, F. Pagnanelli, F. Pålsson, B.I. Pan, S.K. Pan, Z. Panchenko, A.F. Panteleeva, N. Papanastassiou, D. Park, C-L. Pascual, R.L. Paspaliaris, I. Passeri, L. Pastukhova, I.V. Pawlos, W. Pax, R.A Pax, R.A. Pearce, H. Pehlken, A. Pehlken, A. Pelser, P. Peng, Y. Peres, A.E.C. Peretti, R. Peretti, R. Pérez, M. Persson, S.V. Peszko, B. Petersen, F.W. Petersen, F.W. Petersen, F.W. Petersen, J Petersen, J. Peterson, K Petrie, J. Petrie, J.G Petrie, J.G. Petrie, J.G. Petrie, J.G. Petrie, J.G. Petzold, G Phillips, P.L. Pijnenborg, M.J.A. Pistorius, P.C. Pivovarova, T.A. Post, J.R. Potyomkin, A Powell, M.S. Powell, M.S. Pradip Prasad, A. Prasad, N. Pretz, T Pretz, T. Pretz, T. Pugh, R.J. Pugh, R.J. Punishko, O.A Qi, B.C Qi, B.C. Qiu, G. Qiu, X. Radziszewski, P. Rai, B.

Raichur, A.M. Raja, S. Rajcic-Vujasinovic, M.M Rajcic-Vujasinovic, M.M. Ralston, J. Ralston, J. Ralston, J. Ralston, J. Rao, N.D. Rao, P.V.T. Rao, S.M. Raschenko, A.F Regler, J. Remes, R. Remmerswaal, H. Restrepo, L. Reuter, M.A Reuter, M.A. Reuter, M.A. Reuter, M.A. Reuter, M.A. Reuter, M.A. Reuter, M.A. Reuter, M.A. Reuter, M.A. Riedel, F. Riggs, W Ripke, S.J Robertson, C. Rolf, L. Rong, R.X. Ross, V.E. Rossouw, K.J.J. Rubinstein, J.B. Rubio, J. Rudman, M. Rule, C.M. Rumball, J.A. Runge, K.C. Runge, K.C. Ruse, B.C. Ruthnasamy, M. Ryaboy, V.I. Sabirov, R. Saha, P. Salas Cazon, M. Salatic, D. Saloheimo, K. Sand, W. Sandenbergh, R.F. Sandvik, K.L. Santhiya, D. Sarkhel, B.R. Sasaki, H Sastry, K. Savari, E.E Scheepers, E. Schena, G. Schmidt, M. Schneider, C.L. Schneider, C.L.

Schneider, M. Scholte, A. Schreithofer, N. Schulze, H.J. Schumskaya, L.G. Schutte, A.J. Scott, A. Searby, G.E. Searby, G.E. Sedelnikova, G.V Sedelnikova, G.V. Sen, P.K. Serci, A. Serranti, S. Severnyuk, V.V. Shackleton, N.J. Shackleton, N.J. Sharipova, A.S. Sharp, V. Shatalov, V.V. Shehu, N. Shehu, N. Shevelev, A.I Shibata, J. Shibayama, A Shibayama, A. Shibayama, A. Shinozaki, S. Shuloyakov A.D Silvester, E. Simic, K. Simmons, G.L. Simons, S.J.R Simukanga, S. Singh, A. Singh, A. Sirkeci, A.A. Sissing, A. Skorohodov, V.D. Smeink, R. Smit, J.P. Smith, G.C. Smith, V.C. Smith, V.C. Sofra, F. Solozhenkin, P.M Solozhenkin, P.M Solozhenkin, P.M. Solymár, K. Somasundaran, P. Somerville, M.A. Song, M. Sono, J. Sowerby, B.D. Spasova, I.I. Spencer, S.J. Spooner, Y. Spyridopolous, M.T. Srivastava, J.P. Srivastava, M.P. Stadler, S.A.C. Stankovic, Z.D

Stankovic, Z.D. Starkey, J. Stevic, Z.M Stevic, Z.M Stewart, G.A. Stewart, M Stewart, M Stewart, M. Stöckelhuber, K.W. Stollberg, C. Stolyarov, V Stowe, K Subramanian, S. Subramanian, V. Suljada, T Sun, C. Sun, C. Sun, S. Sun, S. Sun, S. Sutaone, A.T. Svoboda, J. Svoboda, J. Swarna, P. Swartbooi, A.M Swift, J.D. Sztaba, K.S. Tadeusiewicz, R Tadeusz, T. Tan, X. Tano, K.T. Tarasov, A.V Tarasov, A.V. Tarján, I. Tarkan, H.M. Tarkan, M. Thakur, L.K. Theander, K. Tian, J. Tiefel, H. Titkov, S. Tora, B. Torem, M.L. Toro, L. Toro, L. Torrealba-Vargas, J. Trindade, R.B.E. Troncoso, J. Trybalski, K. Trybalski, K. Tsukerman, V.A. Tsukerman, V.A. Tsukerman, V.A. Tsunekawa, M. Tumidajski, T Turner, P.A. Ubaldini, S. Ubaldini, S. Unland, G. Usov, A.F. Vaisberg L.A. Vakarelski, I.U.

van der Merwe, W. van der Spuy, D.de V. van der Spuy, D.de V. van der Weijden, R.D. van Deventer, J.S.J. van Deventer, J.S.J. van Deventer, J.S.J. van Drunick, W.I. van Drunnick, W. van Dyk, J.C van Hille, R. van Hille, R. van Hille, R. van Ommen, R. van Schaik, A. van Schaik, A. van Schaik, A. van Wageningen, W.F.C. van Weert, G. van Weert, G. van Zyl, J.W van Zyl, P.J. Vedin A.K. Vegliò, F. Vegliò, F. Vegliò, F. Venter, D. Ventura-Medina, E. Ventura-Medina, E. Verhoef, E.V. Verhoef, E.V. Verwoerd, J. Vianna, S.M. Videla, J.C. Vidusov, T.E. Vigdergauz, V.E. Vijayalakshmi, S.P. Vinken, E. Vinogradov, A.N. Vogt, V. Voiloshnikov, G.I. Volland, A. von Blottnitz, H. von Blottnitz, H. von Moltke, T. Vu, H.N. Vujic, S.B. Vujic, S.B. Waanders, F.B Waanders, F.B. Wakamatsu, T. Wang, F. Wang, J. Wang, X Wang, X. Wang, X. Wang, Y.L. Wang, Z Wegner, T. Wei, D. Wei, X

Wei, Y.H. Weiblen, P.W. Weitkämper, L. Wells, P.F. Wenger, A. Weyhe, R. WhitenW.J. Whittles, D. Williams, B.K. Williams, R.A. Williams, R.A. Wolfaardt, G.M. Wong, G.P. Wotruba, H Wotruba, H. Wright, M. Wright, S. Wszoek, W. Xie, J. Xiong, D. Xu, M. Yamamoto, H. Yamashita, T. Yang, S. Yang, Y. Yang, Y. Yao, Z. Yemelyanov, M.F Yen, W.T. Yianatos, J.B. Yin, W Yousef, A.A. Yu, F. Yu, Y Yu, Y Yu, Y Yu, Y. Yuan, J Yüce, A.E. Yusupov, T.S Yvon, J Zagorodnyaya, A.N. Zanetti, M.C. Zavaliangos, A. Zhang, F. Zhang, F. Zhang, F. Zhang, J Zharov, V.S. Zhong, K.N. Zhou, J. Zhou, Z. Zhu, Y. Zhu, Z. Zhuravlev, F.M Zimin, A.B Zonnedda, G. Zouboulis, A.I. Zucca, A. Zucca, A.

Castro, M.B.G., Remmerswaal, J.A.M., Reuter, M.A. and Boin, U.