Table of Contents - Destination XL Group DXLG... · Table of Contents Specification Number...
Transcript of Table of Contents - Destination XL Group DXLG... · Table of Contents Specification Number...
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
1
Table of Contents
Specification Number Description Page Revision History 2
100G Woven Garment (Shirts & Pants) 3-4
100F Woven Fabric (Shirt & Pants) 5-6
101G Woven Denim Garment 7-8
101F Woven Denim Fabric 9-10
102G Woven Twill Garment 11-12
102F Woven Twill Fabric 13-14
200G Knit Garment 15-16
200F Knit Fabric 17-18
201G Loungewear/Underwear/ Terry Robe 19-20
201F Loungewear/Underwear / Terry Robe Fabric 21-22
202G Swimwear 23-24
202F Swimwear Fabric 25-26
300G Sweaters 27-29
400G Leather and Suede Garments 30-31
400F Leather and Suede Hides 32-33
500F Lining fabric (Applies For All Textile Item) 34-36
600G Textile Hats and Caps 37-39
601G Socks and Hosiery 40-42
700G Outerwear Garments (With or Without Lining) 43-44
700F Outerwear Fabric (Shell & Lining) 45-47
701G Sport Coats, Dress Jacket, Suits (With or Without Lining) 48-49
701F Sport Coats, Dress Jacket, Suits (Shell & Lining) 50-52
800 Component Protocol 53
801 Elastic Protocol 54
802 Special Claims Protocol 55-58
Appendix 1 Zipper Requirement 59-61
Appendix 2 The Rating of Test Specimen after Random Tumble Pilling Test (ASTM D3512) 62-63
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
2
Revision History
Date Description Specification
9/26/2011 Added Revision History page NA
9/26/2011 Changed denim crocking standards 101F - Denim Fabric
9/26/2011 Corrected unit calculation for Air permeability/Windproof claim 802 - Special Claims
10/3/2011 Amended denim crocking standards approved by V Bezpalko 101F - Denim Fabric
10/26/11 Removed duplication of waterproof claim from page 55 (Ray Liou). Retained Waterproof claim on page 56.
802 – Special Claims
01/3/2012 Removed all special property requirements from individual protocols 100 - 701
1/25/2012 Added appearance after wash to additional colorway test All
3/23/2012 Revised denim seam strength >12 oz/sq yd to 50 lbs 101G – Denim Garment
3/23/2012 - Deleted AATCC 100 & 130 from antibacterial assessment - Deleted MTS S013 soil release test - Added pre-cure/post –cure verbiage to wrinkle resistant/durable
press requirement
802 – Special Claims
3/23/2012 Specified “heel area” for abrasion; added dimensional stability in addition to NAHM fit criteria
601G- Socks and Hosiery
3/27/2012 Added mandatory dry-cleaning to outerwear, suits, sports coats, dress pants protocols
100 G/F, 500F, 700 F, 701 G/F
4/11/2012 Corrected typo – water wicking test from 30 washes to 30 minutes 802 – Special Claims
4/12/2013 - Updated DXLG company’s name and logo from CMRG to DXLG - Added new test-- CF to Crocking (AATCC 8/116) - Added Antifungal test for Socks(AATCC 30), qualitative only - Added Attachment Strength (ect.) for Shank Button - Added 20 Home Launderings for Antibacterial activity assessment of
textile materials( AATCC 147) - Revised Wrinkle Free/Resistant/Easy Care( AATCC 143) - Remove YKK default zipper codes
All 101G- Denim Garment
601G - Socks and Hosiery Component- Spec 800 802 – Special Claims
802 – Special Claims
Zipper Protocol
10/22/2013 - Added the package price of Elastic for Asia and US
- Added the Terry Robe to Loungewear / Underwear protocol - Added checking the loss of lint for Terry Robe (visual assessment:
slight/ some/ noticeable) in appearance after laundering
- Added the requirement of (satisfactory for double face fleece) for General Appearance
- Added new test –Pilling(ASTM D3512) : double face fleece with anti-pill treatment claimed
- Revised the test method of Size sticker evaluation( MTS S026)
- Added The Rating of Test Specimen after Random Tumble Pilling Test (ASTM D3512)
Elastic – Spec 801
201G /F Loungewear/Underwear/
Terry Robe
200G /F Knit Garment/Fabric
200 F Knit Fabric
Special Claims – Spec
802 Appendix 2
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
3
DXLG – Performance Specifications Woven Garment (Shirts & Pants) - Spec 100G
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Labeling
Textile Fiber Products Identification Act Care Labeling Rule Wool Products Labeling Act
Visual assessment Fiber Content Label RN # or WPL # Country of Origin Care Label Size
Fabric Construction
Defects Visual assessment Report all defects
Dimensional Stability
Laundering - 3 washes AATCC 150 100% Cotton: 4% All other: 3% 1% growth
Dry cleaning – 1 cycle *Note: Mandatory test for dress pants
Professional dry clean 2% shrinkage No growth
Seam Twist/Torque AATCC/ASTM TS-004 No more than 5% or ½”
Appearance after Laundering/Dry cleaning
General Appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0 Color Change: Class 4.0 Self-staining: Class 4.5
Seam strength ASTM D1683 < 6.0 oz/yd2: 20 lb Min
≧6.0 oz/yd2: 25 lb Min.
Seam slippage ASTM D1683 20 lb Min @1/4”
Component attachment strength Refer To Spec 800 Refer To Spec 800
Pocket Attachment strength ASTM D1683 Modified 15 lb Min
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009%by weight)
Others
Component Not Tested At Fabric Stage Follow fabric required test items to test
- EU Market
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
<30 mg/kg
Nickel Qualitative prEN12471 Negative
Nickel Leaching (When Request) EN 12472/EN 1811 <0.2 g/cm2/week
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request or Nylon fiber included)
ISO 14184-1 <75 mg/kg
Sleepwear Flammability Nightwear (Safety) Regulations Comply
Fiber Label Verification Determined by general garment testing procedures
Comply
Care Symbol/wording verification Determined by general garment testing procedures
Comply
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
4
DXLG – Performance Specifications Woven Garment (Shirts & Pants) - Spec 100G
A- USA Market Page 2 of 2 Test Charges USA Asia
One for full testing Plus All Color Block Styling for Appearance Only
2 garments $150.00 $100.00
Additional Colorway – Colorfastness and appearance only
60.00 30.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Wrinkle Resistance 135.00 120.00
B- EU Market Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128/ Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
5
DXLG – Performance Specifications Woven Fabric (Shirts & Pants) – Spec 100F
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Fabric Construction
Fiber Analysis* AATCC 20A/ASTM D629 0% Single Fiber +3% Blends
Fabric Weight (oz/sq yd) ASM D3776 +5% from contracted weight
Fabric Count ASTM D3775 +5% from contracted weight
Yarn Size* ( If requested) ASTM D1059 +5% from contracted weight
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 135 100% Cotton: 4% All other: 3% 1% growth
Dry cleaning – 1 cycle *Note: Mandatory test for dress pants
Professional dry clean 2% shrinkage No growth
Skew/Torque AATCC 179 method 1, Option1 No more than 5% or ½”
Appearance after Laundering/dry Cleaning
General Appearance Visual assessment No distortion, defects, excessive puckering, pill- Class 4.0
Appearance After Dry Ironing
General Appearance Hand iron Color Change: Class 4.0 No distortion defects
Colorfastness
CF to Home Laundering AATCC 135 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Commercial Dry cleaning Commercial Dry cleaning- 1 Cycle
Color Change/Staining: Class 4.0; Self-staining: Class 4.5
CF to Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Non-Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Crocking AATCC 8/116 General: Dry Class 4.0 Wet Class 3.0
CF to Light @ 20 AFU AATCC 16, Option 3 Class 4.0 (provide 10 AFU for reference when fails at 20 AFU)
CF to Water: Color block/Contrast trims only AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Perspiration: Activewear AATCC 15 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
*Phenolic Yellowing: Chambray, White, Ivory if > 50% coverage
MTS Method/ITM -075 Class 3.5
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
6
DXLG – Performance Specifications Woven Fabric (Shirts & Pants) – Spec 100F
A- USA Market Page 2 of 2
Test Property Test Method DXLG Requirement
Performance
Flammability (If not exempt) CFR 1610 Class 1
Seam slippage ASTM D434 20 lb Min @1/4”
Tensile strength ASTM D5034 <6.0 oz/yd2: 30 lb Min
≧6.0 oz/yd2: 40 lb Min.
Tear strength ASTM D1424 < 6.0 oz/yd2 : 2.5 lb Min. 6.0- 7.9 oz/yd2 : 3.0 lb Min.
≧8.0 oz/yd2 : 4.0 lb Min
Stretch and recovery (Yarns contain spandex >=5% and in the direction of stretch only)
ASTM D3107 Stretch: 15% Min Growth: 5% Max Recovery (30 sec/30 mins): 90% Min
*pH value (If applicable) AATCC 81 6 – 8
Analytical- Upon Request Only
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Test Charges USA Asia
Fabric 1-½ yards @ Color 195.00 150.00
Additional colorway – Colorfastness and appearance only
1-½ yards @ Color 80 55
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
Wrinkle Resistance 135.00 120.00
pH Value 70.00 15.00
Stain resistance 110.00 90.00
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
7
DXLG – Performance Specifications Woven Denim Garment - Spec 101G
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Labeling
Textile Fiber Products Identification Act Care Labeling Rule Wool Products Labeling Act
Visual assessment Fiber Content Label RN # or WPL # Country of Origin Care Label Size
Fabric Construction
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 150 Garment Wash- 2.5% Rigid- 4% 1% growth
Dry cleaning – 1 cycle Professional dry clean 2% shrinkage No growth
Seam Twist/Torque AATCC/ASTM TS-004 No more than 5% or ½”
Appearance after Laundering/dry Cleaning
General appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0 Color Change: Class 4.0 Self-staining: Class 4.5
Colorfastness
CF to Crocking AATCC 8/116 General: Dry Class 4.0 Wet Class 2.5 Dark Indigo/Black: Dry Class 4.0 Wet Class 2.0
Performance
Seam strength ASTM D1683 (Warp x Weft) 8-10 oz/yd2: 35 lb Min. 10.1–12.0 oz/yd2 : 40 lb Min >12.0 oz/yd2 : 50 lb Min
Seam slippage ASTM D1683 20 lb Min @1/4”
Component attachment strength Refer To Spec 800 Refer To Spec 800
Pocket attachment strength ASTM D1683 Modified 20 lb Min
pH value (If applicable) AATCC 81 6 – 8
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Others
Component Not Tested At Fabric Stage Follow fabric required test items to test
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
8
DXLG – Performance Specifications Woven Denim Garment - Spec 101G
B- EU Market Page 2 of 2
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
<30 mg/kg
Nickel Qualitative prEN12471 Negative
Nickel Leaching (When Request) EN 12472/EN 1811 <0.2 g/cm2/week
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request Or Nylon fiber included)
ISO 14184-1 <75 mg/kg
Sleepwear Flammability Nightwear (Safety) Regulations Comply
Fiber Label Verification Determined by general garment testing procedures
Comply
Care Symbol/wording verification Determined by general garment testing procedures
Comply
A- USA Market
Test Charges USA Asia
One colorway for full testing Plus All Color Block Styling for Appearance Only
2 garments $150.00 $100.00
Additional Component– Colorfastness and appearance only
60.00 30.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
B- EU Market
Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128/ Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers *Additional charge
Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
9
DXLG – Performance Specifications Woven Denim Fabric – Spec 101F
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Fabric Construction
Fiber Analysis* AATCC 20A/ASTM D629 0% Single Fiber +3% Blends
Fabric Weight (oz/sq yd) ASM D3776 +5% from contracted weight
Fabric Count ASTM D3775 +5% from contracted weight
Yarn Size* ( If requested) ASTM D1059 +5% from contracted weight
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 135 Garment Wash- 2.5% Rigid- 4% 1% growth
Dry cleaning – 1 cycle Professional dry clean 2% shrinkage No growth
Skew/Torque AATCC 179 method 1, Option 1
No more than 5% or ½”
Appearance after Laundering/dry Cleaning
General appearance Visual assessment No distortion, defects, excessive puckering, pill- Class 4.0
Appearance After Dry Ironing
General Appearance Hand iron Color Change: Class 4.0 No distortion defects
Colorfastness
CF to Home Laundering AATCC 135 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Commercial Dry cleaning Commercial Dry cleaning- 1 Cycle
Color Change/Staining: Class 4.0; Self-staining: Class 4.5
CF to Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Non-Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Crocking AATCC 8/116 General: Dry Class 4.0 Wet Class 2.5 Dark Indigo/Black: Dry Class 4.0 Wet Class 2.0
CF to Light @ 20 AFU AATCC 16, Option 3 Class 4.0 (provide 10 AFU for reference when fails at 20 AFU)
CF to Water: Color block/Contrast trims only AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Ozone # AATCC 109, 1 Cycle Class 3.5
CF to Burnt Gas Fumes # AATCC 23 , 1 Cycle Class 3.5
* Phenolic Yellowing # MTS Method/ITM -75 Class 3.5
# For indigo Dye, White, Ivory if > 50% coverage
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
10
DXLG – Performance Specifications Woven Denim Fabric – Spec 101F
A- USA Market Page 2 of 2
Test Property Test Method DXLG Requirement
Performance
Flammability (If not exempt) CFR 1610 Class 1
Seam slippage ASTM D434 20 lb Min @1/4”
Tensile strength ASTM D5034 (Warp x Weft) 8-10 oz/yd2 : 55x 35 lb Min. 10.1–12.0 oz/yd2 : 65 x 40 lb Min
>12.0 oz/yd2 : 85x70 lb Min
Tear strength ASTM D1424 (Warp x Weft) 8-10 oz/yd2 : 4.0x 3.0 lb Min. 10.1–12.0 oz/yd2 : 4.0x 3.5 lb Min
>12.0 oz/yd2 : 6.5x4.0 lb Min
Abrasion Resistance ASTM D3886 (No hole) Stretch Denim : 100 cycles Min. Unwash : 500 cycles Min Washed : 200 cycles Min
Stretch and recovery (Yarns contain spandex >=5% and in the direction of stretch only)
ASTM D3107 Stretch: 15% Min Growth: 5% Max Recovery (30 sec/30 mins): Min 90%
* pH value (If applicable) AATCC 81 6 – 8
Analytical- Upon Request Only
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Test Charges USA Asia
Fabric 1-½ yards @ Color 220.00 165.00
Additional colorway – Colorfastness and appearance only
1-½ yards @ Color 80.00 55.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
pH Value 70.00 15.00
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
11
DXLG – Performance Specifications Woven Twill Garment - Spec 102G
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Labeling
Textile Fiber Products Identification Act Care Labeling Rule Wool Products Labeling Act
Visual assessment Fiber Content Label RN # or WPL # Country of Origin Care Label Size
Fabric Construction
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 150 100% Cotton: 4% All other: 3% / 1% growth
Dry cleaning – 1 cycle Professional dry clean 2% shrinkage No growth
Seam Twist/Torque AATCC/ASTM TS-004 No more than 5% or ½”
Appearance after Laundering/dry Cleaning
General Appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0 Color Change: Class 4.0 Self-staining: Class 4.5
Performance
Seam strength ASTM D1683 < 6.0 oz/yd2 : 25 lb Min. 6.0- 7.9 oz/yd2 : 30 lb Min.
≧8.0 oz/yd2: 35 lb Min
Seam slippage ASTM D1683 20 lb Min @1/4”
Component attachment strength Refer To Spec 800 Refer To Spec 800
Pocket attachment strength ASTM D1683 15 lb Min
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Others
Component Not Tested At Fabric Stage Follow fabric required test items to test
B- EU Market
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
<30 mg/kg
Nickel Qualitative prEN12471 Negative
Nickel Leaching (When Request) EN 12472/EN 1811 <0.2 g/cm2/week
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request Or Nylon fiber included)
ISO 14184-1 <75 mg/kg
Sleepwear Flammability Nightwear (Safety) Regulations Comply
Fiber Label Verification Determined by general garment testing procedures
Comply
Care Symbol/wording verification Determined by general garment testing procedures
Comply
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
12
DXLG – Performance Specifications Woven Twill Garment - Spec 102G
A- USA Market Page 2 of 2
Test Charges USA Asia
One colorway for full testing Plus All Color Block Styling for Appearance Only
2 garments $150.00 $100.00
Additional Component– Colorfastness and appearance only
60.00 30.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Wrinkle Resistance 135.00 120.00
B- EU Market
Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128/ Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
13
DXLG – Performance Specifications Woven Twill Fabric – Spec 102F
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Fabric Construction
Fiber Analysis* AATCC 20A/ASTM D629 0% Single Fiber +3% Blends
Fabric Weight (oz/sq yd) ASM D3776 +5% from contracted weight
Fabric Count ASTM D3775 +5% from contracted weight
Yarn Size* ( If requested) ASTM D1059 +5% from contracted weight
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 135 100% Cotton: 4% All other: 3% 1% growth
Dry cleaning – 1 cycle Professional dry clean 2% shrinkage No growth
Skew/Torque AATCC 179 method 1, Option1 No more than 5% or ½”
Appearance after Laundering/dry Cleaning
General Appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0
Appearance After Dry Ironing
General Appearance Hand iron Color Change: Class 4.0 No distortion defects
Colorfastness
CF to Home Laundering AATCC 135 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Commercial Dry cleaning Commercial Dry cleaning- 1 Cycle
Color Change/Staining: Class 4.0; Self-staining: Class 4.5
CF to Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Non-Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Crocking AATCC 8/116 General: Dry Class 4.0 / Wet Class 3.0
CF to Light @ 20 AFU AATCC 16, Option 3 Class 4.0 (provide 10 AFU for reference when fails at 20 AFU)
CF to Water: Color block/Contrast trims only AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Perspiration: Activewear AATCC 15 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
*Phenolic Yellowing: White, Ivory if > 50% coverage
MTS Method/ITM -75 Class 3.5
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
14
DXLG – Performance Specifications Woven Twill Fabric - Spec 102F
A- USA Market Page 2 of 2
Test Property Test Method DXLG Requirement
Performance
Flammability (If not exempt) CFR 1610 Class 1
Seam slippage ASTM D434 20 lb Min @1/4”
Tensile strength ASTM D5034 (Warp x Weft) < 6.0 oz/yd2: 30 lb Min. 6.0- 7.9 oz/yd2: 40 x 30 lb Min.
≧8.0 oz/yd2: 60 x 50 lb Min.
Tear strength ASTM D1424 < 6.0 oz/yd2: 2.5 lb Min. 6.0- 7.9 oz/yd2: 3.0 lb Min.
≧8.0 oz/yd2: 4.0 lb Min.
Abrasion Resistance ASTM D3886 (No hole) Stretch Twill: 100 cycles Min. Unwash :
≦8.0 oz/yd2: 300 cycles Min
>8.0 oz/yd2: 500 cycles Min Washed :
≦8.0 oz/yd2: 100 cycles Min
>8.0 oz/yd2 : 200 cycles Min
Stretch and recovery (Yarns contain spandex >=5% and in the direction of stretch only)
ASTM D3107 Stretch: 15% Min Growth: 5% Max Recovery (30 sec/30 mins): Min 90%
*pH value (If applicable) AATCC 81 6 – 8
Analytical- Upon Request Only
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
Test Charges USA Asia
Fabric 1-½ yards @ Color 220.00 165.00
Additional colorway – Colorfastness and appearance only
1-½ yards @ Color 80.00 55.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
Wrinkle Resistance 135.00 120.00
pH Value 70.00 15.00
Stain resistance 110.00 90.00
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
15
DXLG – Performance Specifications Knit Garment – Spec 200G
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Labeling
Textile Fiber Products Identification Act Care Labeling Rule Wool Products Labeling Act
Visual assessment Fiber Content Label RN # or WPL # Country of Origin Care Label Size
Fabric Construction
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 150 5% x 5% 1% growth
Dry cleaning – 1 cycle Professional dry clean 2% shrinkage No growth
Seam Twist/Torque AATCC/ASTM TS-004 No more than 5% or ½”
Appearance after Laundering/dry Cleaning
General Appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0 (Satisfactory for double face fleece) Color Change: Class 4.0 Self-staining: Class 4.5
Performance
Seam stretchability AATCC/ASTM TS-015 <120 gm/m2: 35% and/or 6 lbs ≧120 gm/m2: 50% and/or 7
lbs
Component attachment strength Refer To Spec 800 Refer To Spec 800
Pocket attachment strength ASMT D1683 Modified <120 gm/m2: 35% and/or 6 lbs ≧120 gm/m2: 50% and/or 7 lbs
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Others
Component Not Tested At Fabric Stage Follow fabric required test items to test
B- EU Market
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
<30 mg/kg
Nickel Qualitative prEN12471 Negative
Nickel Leaching (When Request) EN 12472/EN 1811 <0.2 g/cm2/week
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request Or Nylon fiber included)
ISO 14184-1 <75 mg/kg
Sleepwear Flammability Nightwear (Safety) Regulations Comply
Fiber Label Verification Determined by general garment testing procedures
Comply
Care Symbol/wording verification Determined by general garment testing procedures
Comply
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
16
DXLG – Performance Specifications Knit Garment - Spec 200G
A- USA Market Page 2 of 2 Test Charges USA Asia
One colorway for full testing Plus All Color Block Styling for Appearance Only
2 garments $120.00 $80.00
Additional Component– Colorfastness and appearance only
60.00 30.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
B- EU Market
Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128/ Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
17
DXLG – Performance Specifications Knit Fabric – Spec 200F
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Fabric Construction
Fiber Analysis* AATCC 20A/ASTM D629 0% Single Fiber +3% Blends
Fabric Weight (gm/sq m) ASM D3887 +5% from contracted weight
Fabric Count ASTM D3887 +5% from contracted weight
Yarn Size* ( If requested) ASTM D1059 +5% from contracted weight
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 135 5% x 5% 1% growth
Dry cleaning – 1 cycle Professional dry clean 2% shrinkage No growth
Skew/Torque AATCC 179, method 1, Option 1 No more than 5% or ½”
Appearance after Laundering/dry Cleaning
General Appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0 (Satisfactory for double face fleece)
Appearance After Dry Ironing
General Appearance Hand iron Color Change: Class 4.0 No distortion defects
Colorfastness
CF to Home Laundering AATCC 135 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Commercial Dry cleaning Commercial Dry cleaning- 1 Cycle
Color Change/Staining: Class 4.0; Self-staining: Class 4.5
CF to Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Non-Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Crocking AATCC 8/116 General: Dry Class 4.0 / Wet Class 3.0
CF to Light @ 20 AFU AATCC 16, Option 3 Class 4.0 (provide 10 AFU for reference when fails at 20 AFU)
CF to Water: Color block/Contrast trims only
AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Perspiration: Activewear AATCC 15 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
*Phenolic Yellowing: White, Ivory shades if > 50% coverage
MTS Method/ITM-075 Class 3.5
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
18
DXLG – Performance Specifications Knit Fabric – Spec 200F
A- USA Market Page 2 of 2
Test Property Test Method DXLG Requirement
Performance
Flammability (If not exempt) CFR 1610 Class 1
Bursting strength ASTM D3786 <120 gm/m2: 40 psi
≧120 gm/m2: 55 psi
Pilling : double face fleece with anti-pill treatment claimed
ASTM D3512 Satisfactory @ 30 minutes The Rating of Test Specimen after test , please refer to Appendix 2 (Page 62)
Stretch and recovery (Yarns contain spandex >=5% and in the direction of stretch only)
ASTM D2594 Stretch: 15% Min Growth: 5% Max
*pH value (If applicable) AATCC 81 6 – 8
Analytical- Upon Request Only
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Test Charges USA Asia
Fabric 1-½ yards @ Color 180.00 110.00
Additional colorway – Colorfastness and appearance only
1-½ yards @ Color 80.00 55.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
Pilling 45.00 25.00
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
DXLG – Performance Specifications
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
19
Loungewear/Underwear/Terry Robe - Spec 201G
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Labeling
Textile Fiber Products Identification Act Care Labeling Rule Wool Products Labeling Act
Visual assessment Fiber Content Label RN # or WPL # Country of Origin Care Label Size
Fabric Construction
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 150 Woven: 100% Cotton: 4% All other: 3% Knit: 5% x 5% All: 1% growth
Seam Twist/Torque AATCC/ASTM TS-004 No more than 5% or ½”
Appearance after Laundering/dry Cleaning
General Appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0 Color Change: Class 4.0 Self-staining: Class 4.5 Loss of lint : no noticeable (For Terry Robe)
Performance
Seam strength (Woven) ASTM D1683 < 6.0 oz/yd2: 20 lb Min
≧6.0 oz/yd2: 25 lb Min
Seam slippage (Woven) ASTM D1683 20 lb Min @1/4”
Seam stretchability (Knit) AATCC/ASTM TS-015 <120 gm/m2: 35% and/or 6 lbs
≧120 gm/m2: 50% and/or 7 lbs
Component attachment strength Refer To Spec 800 Refer To Spec 800
Pocket attachment strength ASTM D1683 Modified Woven: 15 lb Min Knit: <120 gm/m2: 35% and/or 6 lbs
≧120 gm/m2: 50% and/or 7 lbs
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009 %by weight)
Others
Component Not Tested At Fabric Stage Follow fabric required test items to test
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
20
DXLG – Performance Specifications Loungewear/Underwear/ Terry Robe - Spec 201G
B- EU Market
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
<30 mg/kg
Nickel Qualitative prEN12471 Negative
Nickel Leaching (When Request) EN 12472/EN 1811 <0.2 g/cm2/week
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request Or Nylon fiber included)
ISO 14184-1 <75 mg/kg
Sleepwear Flammability Nightwear (Safety) Regulations Comply
Fiber Label Verification/ Care Symbol/wording verification
Determined by general garment testing procedures
Comply
A- USA Market Page 2 of 2
Test Charges USA Asia
One colorway for full testing Plus All Color Block Styling for Appearance Only
2 garments Woven/Knit: $150/$120
Woven/Knit:-$100/$80
Additional Component– Colorfastness and appearance only
60 30
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45 14
Microscopic fiber content
Two cellulosic fiber blend 95 65
Additional cellulosic fiber 50 22
One specialty hair fiber 100 32
Two specialty hair fiber blend 150 60
Additional specialty fiber 60 32
Lambs wool per yarn/per fiber 150 32
Lead Content 65 25
Phenolic Yellowing Quote 20
pH Value 70 15
B- EU Market
Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128/ Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers *Additional charge
Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
21
DXLG – Performance Specifications Loungewear/Underwear / Terry Robe Fabric - Spec 201F
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Fabric Construction
Fiber Analysis* AATCC 20A/ASTM D629 0% Single Fiber +3% Blends
Fabric Weight Woven- ASM D3776 (oz/sq yd) Knit: ASTM D3887 (gm/sq.m)
+5% from contracted weight
Fabric Count Woven- ASTM D3775 Knit: ASTM D3887
+5% from contracted weight
Yarn Size* ( If requested) ASTM D1059 +5% from contracted weight
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 135 Woven: 100% Cotton: 4% All other: 3 % 1% growth Knit: 5% x 5% 1% growth
Skew/Torque AATCC 179 method 1, Option 1
No more than 5% or ½”
Appearance after Laundering/dry Cleaning
General appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0 Loss of lint: no noticeable (For Terry Robe)
Appearance After Dry Ironing
General Appearance Hand iron Color Change: Class 4.0 No distortion defects
Colorfastness
CF to Home Laundering AATCC 135 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Non-Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Crocking AATCC 8/116 General: Dry Class 4.0 / Wet Class 3.0
CF to Light @ 20 AFU (Silk- 10AFU) AATCC 16, Option 3 Class 4.0 (provide 10AFU for reference when fails at 20 AFU)
CF to Water AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Perspiration AATCC 15 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
*Phenolic Yellowing: Chambray, White, Ivory if > 50% coverage
MTS Method/ITM -75 Class 3.5
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
22
DXLG – Performance Specifications Loungewear/Underwear /Terry Robe Fabric – Spec 201F
A- USA Market Page 2 of 2
Test Property Test Method DXLG Requirement
Performance
Flammability (If not exempt) CFR 1610 Class 1
Seam slippage (Woven) ASTM D434 20 lb Min @1/4”
Tensile strength (Woven) ASTM D5034 <6.0 oz/yd2 : 30 lb Min
≧6.0 oz/yd2 : 40 lb Min
Tear strength (Woven) ASTM D1424 < 6.0 oz/yd2 : 2.5 lb Min. 6.0- 7.9 oz/yd2 : 3.0 lb Min.
≧8.0 oz/yd2 : 4.0 lb Min
Bursting strength (Knit) ASTM D3786 <120 gm/m2: 40 psi
≧120 gm/m2: 55 psi
Stretch and recovery (Yarns contain spandex >=5% and in the direction of stretch only)
Woven: ASTM D3107
Woven/knit: Stretch: 15% Min Growth: 5% Max Woven: Recovery (30 sec/30 mins): Min 90%
Knit: ASTM D2594
Absorbency ASTM 4772 Ultra-absorbency: 75% Min Two-sided terry: 65% Min One-sided terry: 35% Min
*pH value (If applicable) AATCC 81 6 – 8
Analytical- Upon Request Only
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Test Charges USA Asia
Fabric 1-½ yards @ Color
Woven 195.00 150.00
Knit 180 110
Additional colorway – Colorfastness and appearance only
1-½ yards @ Color 80 55
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
pH Value 70.00 15.00
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
23
DXLG – Performance Specifications Swimwear – Spec 202G
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Labeling
Textile Fiber Products Identification Act Care Labeling Rule Wool Products Labeling Act
Visual assessment Fiber Content Label RN # or WPL # Country of Origin Care Label Size
Fabric Construction
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 150 Woven: 100% Cotton: 4% All other: 3% Knit: 5% x 5% Woven/Knit: 1% growth
Seam Twist/Torque AATCC/ASTM TS-004 No more than 5% or ½”
Appearance after Laundering/dry Cleaning
General Appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0 Color Change: Class 4.0 Self-staining: Class 4.5
Performance
Seam strength (Woven) ASTM D1683 <6.0 oz/yd2: 20 lb Min
≧6.0 oz/yd2: 25 lb Min
Seam stretchability (Knit) AATCC/ASTM TS-015 <120 gm/m2: 35% and/or 6 lbs
≧120 gm/m2: 50% and/or 7 lbs
Seam slippage (Woven) ASTM D1683 20 lb Min @1/4”
Component attachment strength Refer To Spec 800 Refer To Spec 800
Pocket attachment strength ASTM D1683 Modified Woven: 15 lb Min Knit: <120 gm/m2: 35% and/or 6 lbs
≧120 gm/m2: 50% and/or 7 lbs
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Others
Component Not Tested At Fabric Stage Follow fabric required test items to test
B- EU Market
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
<30 mg/kg
Nickel Qualitative prEN12471 Negative
Nickel Leaching (When Request) EN 12472/EN 1811 <0.2 g/cm2/week
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request Or Nylon fiber included)
ISO 14184-1 <75 mg/kg
Sleepwear Flammability Nightwear (Safety) Regulations Comply
Fiber Label Verification / Care Symbol/wording verification
Determined by general garment testing procedures
Comply
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
24
DXLG – Performance Specifications Swimwear – Spec 202G
A- USA Market Page 2 of 2
Test Charges USA Asia
One colorway for full testing Plus All Color Block Styling for Appearance Only
2 garments Woven/Knit: $150/$120
Woven/Knit:-$100/$80
Additional Component– Colorfastness and appearance only
60 30
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45 14
Microscopic fiber content (Refer to fabric charge)
Lead Content 65 25
Phenolic Yellowing Quote 20
pH Value 70 15
B- EU Market Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128/ Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers *Additional charge
Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
25
DXLG – Performance Specifications Swimwear Fabric - Spec 202F
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Fabric Construction
Fiber Analysis* AATCC 20A/ASTM D629 0% Single Fiber +3% Blends
Fabric Weight Woven- ASM D3776 (oz/sq yd) Knit: ASTM D3887 (gm/sq.m)
+5% from contracted weight
Fabric Count Woven- ASTM D3775 Knit: ASTM D3887
+5% from contracted weight
Yarn Size* ( If requested) ASTM D1059 +5% from contracted weight
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 135 Woven: 100% Cotton: 4% All other: 3% Knit: 5% x 5% Woven/Knit: 1% growth
Skew/Torque AATCC 179 method 1, Option 1
No more than 5% or ½”
Appearance after Laundering/dry Cleaning
General Appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0
Appearance After Dry Ironing
General Appearance Hand iron Color Change: Class 4.0 No distortion defects
Colorfastness
CF to Home Laundering/Hand Wash AATCC 135 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Non-Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Crocking AATCC 8/116 General: Dry Class 4.0 / Wet Class 3.0
CF to Light @ 40 AFU AATCC 16, Option 3 Class 4.0 (provide 20AFU for reference when fails at 40 AFU)
CF to Water AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Perspiration AATCC 15 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Sea Water AATCC 106 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Chlorinated Pool Water AATCC 162 Color Change: Class 4.0
*Phenolic Yellowing: Chambray, White, Ivory if > 50% coverage
MTS Method/ITM -75 Class 3.5
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
26
DXLG – Performance Specifications Swimwear Fabric – Spec 202F
A- USA Market Page 2 of 2
Test Property Test Method DXLG Requirement
Performance
Flammability (If not exempt) CFR 1610 Class 1
Seam slippage (Woven) ASTM D434 20 lb Min @1/4”
Tensile strength (Woven) ASTM D5034 <6.0 oz/yd2: 30 lb Min
≧6.0 oz/yd2: 40 lb Min.
Tear strength (Woven) ASTM D1424 < 6.0 oz/yd2 : 2.5 lb Min. 6.0- 7.9 oz/yd2 : 3.0 lb Min.
≧8.0 oz/yd2 : 4.0 lb Min
Bursting strength (Knit) ASTM D3786 <120 gm/m2: 40 psi
≧120 gm/m2: 55 psi
Stretch and recovery (Yarns contain spandex >=5% and in the direction of stretch only)
Woven: ASTM D3107
Woven/knit: Stretch: 15% Min Growth: 5% Max Woven: Recovery (30 sec/30 mins): Min 90%
Knit: ASTM D2594
*pH value (If applicable) AATCC 81 6 – 8
Analytical- Upon Request Only
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Testing Charges USA Asia
Fabric 1-½ yards @ Color
Woven 195.00 150.00
Knit 180.00 110.00
Additional colorway – Colorfastness and appearance only
1-½ yards @ Color 80 55
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
pH Value 70.00 15.00
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
27
DXLG – Performance Specifications Sweaters – Spec 300G
Note: See Protocol 500F for Lining Fabric
A- USA Market Page 1 of 3
Test Property Test Method DXLG Requirement
Labeling
Textile Fiber Products Identification Act Care Labeling Rule Wool Products Labeling Act
Visual assessment Fiber Content Label RN # or WPL # Country of Origin Care Label Size
Fabric Construction
Fiber Analysis* AATCC 20A/ASTM D629 0% Single Fiber +3% Blends
Sweater weight per dozen ASM D3887 modified +5% from contracted weight
Gauge ASTM D3887 +5% from contracted weight
Yarn Size* ( If requested) ASTM D1059 +5% from contracted weight
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 150 5% x 5% (L x W) 1% growth
Dry cleaning – 1 cycle Professional dry clean 2% shrinkage No growth
Seam Twist/Torque AATCC/ASTM TS-004 No more than 5% or ½”
Appearance after Laundering/dry Cleaning
General appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0
Appearance After Dry Ironing
General Appearance Hand iron Color Change: Class 4.0 No distortion defects
Colorfastness
CF to Home Laundering AATCC 143 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Commercial Dry cleaning Commercial Dry cleaning- 1 Cycle
Color Change/Staining: Class 4.0; Self-staining: Class 4.5
CF to Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Non-Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Crocking AATCC 8/116 General: Dry Class 4.0 / Wet Class 3.0
CF to Light @ 20 AFU AATCC 16, Option 3 Class 4.0 (provide 10 AFU for reference when fails at 20 AFU)
CF to Water: Color block/Contrast trims only AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Perspiration: Activewear AATCC 15 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
*Phenolic Yellowing: White, Ivory shades if > 50% coverage
MTS Method/ITM-075 Class 3.5
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
28
DXLG – Performance Specifications Sweaters – Spec 300
A- USA Market Page 2 of 3
Test Property Test Method DXLG Requirement
Performance
Flammability (If not exempt) CFR 1610 Class 1
Seam stretchability AATCC/ASTM TS-015 <120 gm/m2: 35% and/or 6 lbs
≧120 gm/m2: 50% and/or 7 lbs
Bursting strength ASTM D3786 <120 gm/m2: 40 psi
≧120 gm/m2: 55 psi
Stretch and recovery (Yarns contain spandex >=5% and in the direction of stretch only)
Knit: ASTM D2594 Stretch: 15% Min Growth: 5% Max
*Pilling Resistance (For wool and wool blended sample) (Note 21)
ICI pilling box method Wool blends: class 3.5@ 4 hours (14,400 revolutions) Cashmere/Luxury fibers : class 3.5 @ 2 hours (7200 revolutions)
Component attachment strength Refer To Spec 800 Refer To Spec 800
Pocket attachment strength ASTM D1683 Modified <120 gm/m2: 35% and/or 6 lbs
≧120 gm/m2: 50% and/or 7 lbs
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
B- EU Market
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
<30 mg/kg
Nickel Qualitative prEN12471 Negative
Nickel Leaching (When Request) EN 12472/EN 1811 <0.2 g/cm2/week
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request Or Nylon fiber included)
ISO 14184-1 <75 mg/kg
Sleepwear Flammability Nightwear (Safety) Regulations Comply
Fiber Label Verification Determined by general garment testing procedures
Comply
Care Symbol/wording verification Determined by general garment testing procedures
Comply
Note: Lining performance specification refer to Spec 500
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
29
DXLG – Performance Specifications Sweaters – Spec 300G
A- USA Market Page 3 of 3
Test Charges USA Asia
One colorway for full testing unless otherwise requested by DXLG Including 2 common fibers
3 garments 180.00 120.00
Additional colorway – Colorfastness and appearance only
3 panels 100.00 65.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
Pilling Resistance (ICI pilling box method-5hrs) 25.00 15.00
B- EU Market Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128 Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers *Additional charge
Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
30
DXLG – Performance Specifications Leather and Suede Garments - Spec 400G Note: See Protocol 500F for Lining Fabric
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Labeling
Guide for Select Leather and Imitation Leather Products Textile Fiber Products Identification Act (If textile lining) Wool Products Labeling Act (If wool lining) Care Labeling Rule
Visual assessment Leather Identification Fiber Content Label RN # or WPL # Country of Origin Care Label Size
Fabric Construction
Defects Visual assessment Report all defects
Dimensional Stability
Professional Leather Clean Professional Leather Clean 2% Shrinkage No growth Differential Shrinkage (Shell/lining): 2%
Appearance After Cleaning
General appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0 Color Change: Class 4.0 Self-staining: Class 4.5
Performance
Component attachment strength Refer To Spec 800 Refer To Spec 800
Pocket attachment strength ASTM D 1683 Modified 15 lb Min
Seam strength ASTM D 1683 25 lb Min
Seam Slippage ASTM D 1683 20 lb Min @1/4”
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
B- EU Marke
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
<30 mg/kg
Nickel Qualitative prEN12471 Negative
Nickel Leaching (When Request) EN 12472/EN 1811 <0.2 g/cm2/week
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request Or Nylon fiber included)
ISO 14184-1 <75 mg/kg
Sleepwear Flammability Nightwear (Safety) Regulations Comply
Fiber Label Verification Determined by general garment testing procedures
Comply
Care Symbol/wording verification Determined by general garment testing procedures
Comply
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
31
DXLG – Performance Specifications Leather and Suede Garments – Spec 400G
A- USA Market Page 2 of 2
Test Charges USA Asia
Darkest colorway for full testing unless otherwise requested by DXLG
3 garments 280.00 140.00
Additional colorway – Colorfastness and appearance only
1-½ yards @ Color 100.00 55.00
Turnaround time (TAT) Call for quote
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
B- EU Market Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128 Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
32
DXLG – Performance Specifications Leather and Suede Hides – Spec 400F
A- USA Market Page 1 of 2
DXLG – Performance Specifications Leather and Suede Hides – Spec 400F
Test Property Test Method DXLG Requirement
Fabric Construction
Fiber Analysis *(Textile components/lining) AATCC 20A/ASTM D629 Conform
Leather thickness in millimeters ASTM D1813 +5% from contracted weight
Defects Visual assessment Report all defects
Dimensional Stability
Professional Leather Clean Professional Leather Clean 2% shrinkage No growth
Appearance After Cleaning
General appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0
Colorfastness
CF to Professionally Leather Clean Leather Clean- 1 Cycle Color Staining: Class 4.0 Color Change: Class 4.0 Self-staining: Class 4.5
CF to Crocking AATCC 8/116 General: Dry Class 4.0 / Wet Class 3.0
CF to Light @20 AFU AATCC 16, Option 3 Class 4.0 (provide 10 AFU for reference when fails at 20 AFU)
CF to Water: Color block/Contrast trims only AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
*Phenolic Yellowing: White, Ivory if > 50% coverage
MTS Method/ITM -75 Class 3.5
Performance
Flammability – Fabric only if not exempt CFR 1610 Class 1
Seam Slippage ASTM D434 20 lb Min @1/4”
Tensile strength ASTM D 5034 40 lb Min
Tear strength ASTM D1424 <6.0 oz/yd2 : 2.5 lbs Min 6.0-7.9 oz/yd2 : 3.0 lbs Min ≧8.0 oz/yd2 : 4.0 lbs Min
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
33
A- USA Market Page 2 of 2
Test Charges USA Asia
Hide 1-½ yards @ Color 190.00 125.00
Additional colorway – Colorfastness and appearance only
1-½ yards @ Color 100.00 55.00
Turnaround time (TAT) Call for quote
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
34
DXLG – Performance Specifications Lining – Spec 500F
A- USA Market Page 1 of 3
Test Property Test Method DXLG Requirement
Fabric Construction
Fiber Analysis* AATCC 20A/ASTM D629 0% Single Fiber +3% Blends
Fabric Weight Woven- ASM D3776 (oz/sq yd) Knit: ASTM D3887 (gm/sq.m)
+5% from contracted weight
Fabric Count Woven- ASTM D3775 Knit: ASTM D3887
+5% from contracted weight
Yarn Size* ( If requested) ASTM D1059 +5% from contracted weight
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 150/135 Woven: 100% Cotton: 4% All other: 3% 1% growth
Knit: 5% x 5% 1% growth
Differential shrinkage (between shell & lining): 2%
Dry cleaning – 1 cycle *Note: Mandatory for outerwear, suits, sport coats, dress pants
Professional dry clean 2% shrinkage No growth
Skew/Torque AATCC 179, method 1, Option 1 No more than 5% or ½”
Appearance after Laundering/Dry Cleaning
General appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0
Appearance After Dry Ironing
General Appearance Hand iron Color Change: Class 4.0 No distortion defects
Colorfastness
CF to Home Laundering AATCC 143/135 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Commercial Dry cleaning Commercial Dry cleaning- 1 Cycle
Color Change/Staining: Class 4.0; Self-staining: Class 4.5
CF to Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Non-Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Crocking AATCC 8/116 General: Dry Class 4.0 / Wet Class 3.0
CF to Water: Color block/Contrast trims only AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
35
DXLG – Performance Specifications Lining- Spec 500F
A- USA Market Page 2 of 3
Test Property Test Method DXLG Requirement
Colorfastness
CF to Perspiration AATCC 15 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Light @ 20 AFU AATCC 16, Option 3 Class 4.0 (provide 10AFU for reference when fails at 20 AFU)
CF to Sea Water (Swimwear Only) AATCC 106 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Chlorinated Pool Water (Swimwear Only) AATCC 162 Color Change: Class 4.0
CF to Ozone (Indigo Dye & White) AATCC 109, 1 Cycle Class 3.5
CF to Burnt Gas Fumes (Indigo Dye & White) AATCC 23, 1 Cycle Class 3.5
*Phenolic Yellowing: White, Ivory if > 50% coverage
MTS Method/ITM-075 Class 3.5
Performance
Flammability CFR 1610 Class 1
Seam Strength (Woven) ASTM D183 20 lbs Min
Seam Slippage (Woven) ASTM D434 20 lbs @1/4” Min
Seam Stretchability (Knit) AATCC/ASTM TS-015 <120 gm/m2: 35% and/or 6 lbs
≧120 gm/m2: 50% and/or 7 lbs
Tensile strength (Woven) ASTM D5034 (Warp x Weft) < 3.5 oz/yd2: 20 lbs Min 3.5- 6.0 oz/yd2: 30 lb Min. 6.0- 7.9 oz/yd2: 40 x 30 lb Min.
≧8.0 oz/yd2: 60 x 50 lb Min
Tear strength (Woven) ASTM D1424 < 3.5 oz/yd2: 1.5 lbs Min 3.5 – 5.9 oz/yd2: 2.5 lb Min. 6.0- 7.9 oz/yd2: 3.0 lb Min.
≧ 8.0 oz/yd2 4.0 lb Min
Bursting strength (Knit) ASTM D3876 <120 gm/m2: 40 psi
≧120 gm/m2: 55 psi
Component attachment strength Refer To Spec 800 15 lbs @10 secs
B- EU Market
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
< 30 mg/kg
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request) ISO 14184-1 < 75 mg/kg
Sleepwear Flammability Nightwear (Safety) Regulations Comply
Fiber Label Verification Determined by general garment testing procedures
Comply
Care Symbol/wording verification Determined by general garment testing procedures
Comply
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
36
DXLG – Performance Specifications Lining- Spec 500F
A- USA Market Page 3 of 3
Test Charges USA Asia
Garment (Submitted w/garment sample) 50% charge base on garment protocol
Fabric 1-½ yards @ Color @ fabrication
50% charge base on shell fabric protocol
Additional colorway – Colorfastness and appearance only
1-½ yards @ Color 80.00 55.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
Water Repellency 110. 00 70.00
Water Resistance 60.00 50.00
B- EU Market Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128 Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers *Additional charge
Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
37
DXLG – Performance Specifications Textile Hats and Caps – Spec 600G
A- USA Market Page 1 of 3
Test Property Test Method DXLG Requirement
Labeling
Labeling Wool Product Labeling Act
Visual assessment Fiber Content Label (If wool) RN # or WPL # Country of Origin Size
Fabric Construction
Fiber Analysis* (If requested/claimed) AATCC 20A/ASTM D629 0% Single Fiber +3% Blends
Fabric Weight (oz/sq yd) ASM D3776 +5% from contracted weight
Fabric Count ASTM D3775 +5% from contracted weight
Yarn Size* ( If requested) ASTM D1059 +5% from contracted weight
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 150 Woven 100% Cotton: 4% All other: 3% 1% growth
Knit: 5% x 5% 1% growth
Differential shrinkage (between shell & lining): 2%
Appearance after Laundering/dry Cleaning
General Appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0
Colorfastness
CF to Home Laundering AATCC 143 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Crocking AATCC 8/116 General: Dry Class 4.0 / Wet Class 3.0
CF to Water: Color block/Contrast trims only AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Perspiration AATCC 15 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Light @ 40 AFU AATCC 16, Option 3 Class 4.0 (provide 20AFU for reference when fails at 40 AFU)
*Phenolic Yellowing: Denim, Chambray, White, Ivory if > 50% coverage
MTS Method/ITM-075 Class 3.5
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
38
DXLG – Performance Specifications Textile Hats and Caps – Spec 600G
A- USA Market Page 2 of 3
Test Property Test Method DXLG Requirement
Performance
Seam strength ASTM D1683 10 lbs Min.
Seam stretchability AATCC/ASTM TS-015 <120 gm/m2: 35% and/or 6 lbs
≧120 gm/m2: 50% and/or 7 lbs
Bursting strength ASTM D3786 <120 gm/m2: 40 psi
≧120 gm/m2: 55 psi
Component attachment strength Refer To Spec 800 Refer To Spec 800
Pocket attachment strength ASTM D1683 Modified Woven:10 lb Min Knit: <120 gm/m2: 35% and/or 6 lbs
≧120 gm/m2: 50% and/or 7 lbs
Analytical
*Lead in surface coatings (When request ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
B- EU Market
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
<30 mg/kg
Nickel Qualitative prEN12471 Negative
Nickel Leaching (When Request) EN 12472/EN 1811 <0.2 g/cm2/week
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request Or Nylon fiber included)
ISO 14184-1 <75 mg/kg
Fiber Label Verification Determined by general garment testing procedures
Comply
Care Symbol/wording verification Determined by general garment testing procedures
Comply
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
39
DXLG – Performance Specifications Textile Hats and Caps – Spec 600G
A- USA Market Page 3 of 3
Test Charges USA Asia
One colorway for full testing Including 2 common fibers
3 Hats $175.00 $125.00
Additional colorway – Colorfastness and appearance only
3 panels @ Color 50.00 $35.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Fit Property 125 75
Abrasion 45 25
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
B- EU Market Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128 Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers *Additional charge
Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
40
DXLG – Performance Specifications Socks and Hosiery – Spec 601G
A- USA Market Page 1 of 3
Test Property Test Method DXLG Requirement
Labeling
Labeling Wool Product Labeling Act
Visual assessment Fiber Content Label (If wool) RN # or WPL # Country of Origin Size Care Label (If Provided)
Fabric Construction
Fiber Analysis* (If requested/claimed) AATCC 20A/ASTM D629 0% Single Fiber +3% Blends
Weight per dozen Standard measure +5% from contracted weight
Fabric Count of knit ASTM D3887 +5% from contracted weight
Yarn Size* ( If requested) ASTM D1059 +5% from contracted weight
Yarn Construction ASTM D1244 As claimed
Defects Visual assessment Report all defects
Dimensional Stability
Shrinkage AATCC 150/MTS- S006 Method
Subjective evaluation on all sizes after wash. No more than 7% x 7% shrinkage and the ability to fit NAHM Form
Appearance after Laundering/dry Cleaning
General Appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0
Colorfastness
CF to Home Laundering AATCC 143 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Non-Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Crocking AATCC 8/116 General: Dry Class 4.0 / Wet Class 3.0
CF to Water: Color block/Contrast trims only AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Perspiration AATCC 15 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
CF to Light @ 10 AFU AATCC 16, Option 3 Class 4.0 (provide 5 AFU for reference when fails at 10 AFU)
*Phenolic Yellowing: White, Ivory if > 50% coverage
MTS Method/ITM-075 Class 3.5
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
41
DXLG – Performance Specifications Socks and Hosiery – Spec 601G
C- USA Market Page 2 of 3
Test Property Test Method DXLG Requirement
Performance
Abrasion resistance of socks (Heel area) MTS- S015 Athletic: 400 cycle min Casual/Dress: 200 cycle min
Fit Properties – After Laundering MTS- S006 Sock stretchability – biaxial stretch 0.5lb min – 9lb max
Fit Properties – After Laundering MTS- S006 Sock stretchability – cuff support 0.25 lb/in min – 4.25 lb/in max
Fit Properties – After Laundering MTS- S006 Sock stretchability – cuff Correspond to maximum heel girth (inches)
Flammability (If not exempt) CFR 1610 Class 1
*Antifungal (If claimed) AATCC 30 (Test III) Qualitative Only
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
B- EU Market
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
<30 mg/kg
Nickel Qualitative prEN12471 Negative
Nickel Leaching (When Request) EN 12472/EN 1811 <0.2 g/cm2/week
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request Or Nylon fiber included)
ISO 14184-1 <75 mg/kg
Fiber Label Verification Determined by general garment testing procedures
Comply
Care Symbol/wording verification Determined by general garment testing procedures
Comply
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
42
DXLG – Performance Specifications Socks and Hosiery – Spec 601G
A- USA Market Page 3 of 3
Test Charges USA Asia
One colorway for full testing unless otherwise requested by DXLG Including 2 common fibers
3 pair $220.00 $150.00
Additional colorway – Colorfastness and appearance only
3 pair @ Color 50.00 $35.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
B- EU Market Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128 Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers *Additional charge
Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
43
DXLG – Performance Specifications Outerwear Garment- Spec 700G
Note: See Protocol 500F for Lining Fabric
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Labeling
Textile Fiber Products Identification Act Care Labeling Rule Wool Products Labeling Act
Visual assessment Fiber Content Label Care Label Country of Origin RN # or WPL # Size
Fabric Construction
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 150 Woven 100% Cotton: 4% All other: 3% 1% growth
Knit : 5% X 5%
1% growth
Differential shrinkage (between shell & lining): 2%
Dry cleaning – 1 cycle *Note: Mandatory test for outerwear
Professional dry clean 2% shrinkage No growth
Seam Twist/Torque AATCC/ASTM TS-004 No more than 5% or ½”
Appearance after Laundering/Dry Cleaning
General appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0 Color Change: Class 4.0 Self-staining: Class 4.5
Performance
Seam strength (Woven) ASTM D1683 25 lb Min Min
Seam Slippage (Woven) ASTM D1683 20 lb Min @1/4”
Seam stretchability AATCC/ASTM TS-015 <120 gm/m2: 35% and/or 6 lbs ≧120 gm/m2: 50% and/or 7 lbs
Component attachment strength Refer To Spec 800 Refer To Spec 800
Pocket attachment strength ASTM D 1683 Modified Woven: 15 lb Min Knit: <120 gm/m2: 35% and/or 6 lbs
≧120 gm/m2: 50% and/or 7 lbs
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
44
DXLG – Performance Specifications Outerwear Garment- Spec 700G
Note: See Protocol 500F for Lining Fabric
B. EU Market (Note 20) Page 2 of 2
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
<30 mg/kg
Nickel Qualitative prEN12471 Negative
Nickel Leaching (When Request) EN 12472/EN 1811 <0.2 g/cm2/week
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request or Nylon fiber included)
ISO 14184-1 <75 mg/kg
Fiber Label Verification Determined by general garment testing procedures
Comply
Care Symbol/wording verification Determined by general garment testing procedures
Comply
A- USA Market
Test Charges USA Asia
One colorway for full testing Plus All Color Block Styling for Appearance Only
2 garments Woven/Knit: $150/$120
Woven/Knit:-$100/$80
Additional Component– Colorfastness and appearance only
60 30
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Feather/Down Content, Penetration resistance, Fill power, Quote Quote
Oxygen number, Turbidity cleanliness, Species ID Quote Quote
B- EU Market Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128 Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers *Additional charge
Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
45
DXLG – Performance Specifications Outerwear Fabric – Spec 700F
Note: See Protocol 500F for Lining Fabric
A- USA Market Page 1 of 3
Test Property Test Method DXLG Requirement
Fabric Construction
Fiber Analysis* AATCC 20A/ASTM D629 0% Single Fiber +3% Blends
Fabric Weight Woven- ASM D3776 (oz/sq yd) Knit: ASTM D3887 (gm/sq.m)
+5% from contracted weight
Fabric Count Woven- ASTM D3775 Knit: ASTM D3887
+5% from contracted weight
Yarn Size* ( If requested) ASTM D1059 +5% from contracted weight
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 135 Woven 100% Cotton: 4% All other: 3% 1% growth Knit: 5% x 5% 1% growth Differential shrinkage (between shell & lining): 2%
Dry cleaning – 1 cycle *Note: Mandatory test for outerwear
Professional dry clean 2% shrinkage No growth
Skew/Torque AATCC 179, method 1, Option 1 No more than 5% or ½”
Appearance after Laundering/Dry Cleaning
General appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0
Appearance After Dry Ironing
General Appearance Hand iron Color Change: Class 4.0 No distortion defects
Colorfastness
CF to Home Laundering AATCC 135 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Commercial Dry cleaning Commercial Dry cleaning- 1 Cycle
Color Change/Staining: Class 4.0; Self-staining: Class 4.5
CF to Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Non-Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Crocking AATCC 8/116 General: Dry Class 4.0 / Wet Class 3.0
CF to Water: Color block/Contrast trims only (Note 13)
AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
46
DXLG – Performance Specifications Outerwear Fabric- Spec 700F
Note: See Protocol 500F for Lining Fabric
A- USA Market Page 2 of 3
Test Property Test Method DXLG Requirement
Colorfastness
Shell: CF to Light @ 40 AFU Lining: CF to Light @ 20 AFU
AATCC 16, Option 3 Class 4.0 (provide 20 AFU for reference when fails at 40 AFU; 10 AFU when fails at 20 AFU)
*Phenolic Yellowing: Chambray, White, Ivory if > 50% coverage
MTS Method/ITM-075 Class 3.5
Performance
Flammability CFR 1610 Class 1
Seam Slippage (Woven) ASTM D 434 20 lb Min
Tensile strength (Woven) ASTM D5034 (Warp x Weft) < 3.5 oz/yd2 : 25 lbs Min 3.5-5.9 oz/yd2 : 30 lb Min. 6.0- 7.9 oz/yd2 : 40 x 30 lb Min.
≧8.0 oz/yd2 : 60 x 50 lb Min
Tear strength (Woven) ASTM D1424 < 3.5 oz/yd2 : 1.5 lbs Min 3.5 – 5.9 oz/yd2 : 2.5 lb Min. 6.0- 7.9 oz/yd2 : 3.0 lb Min.
≧8.0 oz/yd2 : 4.0 lb Min
Bursting strength (Knit) ASTM D3876 <120 gm/m2 : 40 psi
≧120 gm/m2 : 55 psi
Stretch and recovery (Yarns contain spandex >=5% and in the direction of stretch only)
Woven: ASTM D3107
Woven/knit: Stretch: 15% Min Growth: 5% Max Woven: Recovery (30 sec/30 mins): Min 90%
*pH value (If applicable) (Note 17) AATCC 81 6 – 8
Other
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
47
DXLG – Performance Specifications Outerwear Fabric- Spec 700F
Note: See Protocol 500F for Lining Fabric
A- USA Market Page 3 of 3
Test Charges USA Asia
Fabric 1-½ yards @ Color @ fabrication
Woven: 195.00 Knit:180.00
Woven: 150.00 Knit: 110.00
Additional colorway – Colorfastness and appearance only
1-½ yards @ Color @ fabrication
80.00 55.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
Water Repellency 110.00 70.00
Water Resistance 60.00 50.00
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
48
DXLG – Performance Specifications Sport Coat/Suit Garment - Spec 701G
Note: See Protocol 500F for Lining Fabric
A- USA Market Page 1 of 2
Test Property Test Method DXLG Requirement
Labeling
Textile Fiber Products Identification Act Care Labeling Rule Wool Products Labeling Act
Visual assessment Fiber Content Label Care Label Country of Origin RN # or WPL # Size
Fabric Construction
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 150 1.Woven 100% Cotton: 4% All other: 3% 1% growth 2. Knit : Sueded Fleece/Thermal: 5% x 8% (L x W) Others: 5% 1% growth 3. Differential shrinkage (between shell & lining): 2%
Dry cleaning – 1 cycle *Note: Mandatory test for sport coat/suit
Professional dry clean 2% shrinkage No growth
Seam Twist/Torque AATCC/ASTM TS-004 No more than 5% or ½”
Appearance after Laundering/Dry Cleaning
General appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0 Color Change: Class 4.0 Self-staining: Class 4.5
Performance
Seam strength (Woven) ASTM D1683 25 lb Min Min
Seam Slippage (Woven) ASTM D1683 20 lb Min @1/4”
Seam stretchability AATCC/ASTM TS-015 <120 gm/m2: 35% and/or 6 lbs ≧120 gm/m2: 50% and/or 7 lbs
Component attachment strength Refer To Spec 800 Refer To Spec 800
Pocket attachment strength ASTM D1683 Modified Woven: 15 lb Min Knit: <120 gm/m2: 35% and/or 6 lbs
≧120 gm/m2: 50% and/or 7 lbs
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
49
DXLG – Performance Specifications Sport Coat/Suit Garment - Spec 701G
Note: See Protocol 500F for Lining Fabric
B. EU Market Page 2 of 2
Test Property Test Method DXLG Requirement
Analytical
Azocolourants EN 14362-1/-2; ISO/TS 17234, In house method
<30 mg/kg
Nickel Qualitative prEN12471 Negative
Nickel Leaching (When Request) EN 12472/EN 1811 <0.2 g/cm2/week
Formaldehyde Qualitative A056 Spot Check Method Negative
Formaldehyde Quantitative (When Request Or Nylon fiber included)
ISO 14184-1 <75 mg/kg
Fiber Label Verification Determined by general garment testing procedures
Comply
Care Symbol/wording verification Determined by general garment testing procedures
Comply
A- USA Market
Test Charges USA Asia
One colorway for full testing Plus All Color Block Styling for Appearance Only
2 garments Woven/Knit: $150/$120
Woven/Knit:-$100/$80
Additional Component– Colorfastness and appearance only
60 30
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Feather/Down Content, Penetration resistance, Fill power, Quote Quote
Oxygen number, Turbidity cleanliness, Species ID Quote Quote
B- EU Market Test Charges USA@ sample Asia @sample
Azocolourants 1 garment $175.00 $70.00
Nickel Qualitative 6 pieces of each type of metal trim $35.00 $15.00
Nickel Leaching 6 pieces of each type of metal trim Coated: $200 Uncoated- $125
Coated: $128 Uncoated- $85
Formaldehyde Qualitative 1 garment in polybag $35.00 $15.00
Formaldehyde Quantitative 1 garment in polybag $95.00 $20.00
Sleepwear Flammability 1 garment $100.00 $50.00
Note: Protocol base price includes fiber identification of 2 common fibers *Additional charge
Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
50
DXLG – Performance Specifications Sport Coat/Suit Fabric – Spec 701F
Note: See Protocol 500F for Lining Fabric
A- USA Market Page 1 of 3
Test Property Test Method DXLG Requirement
Fabric Construction
Fiber Analysis* AATCC 20A/ASTM D629 0% Single Fiber +3% Blends
Fabric Weight Woven- ASM D3776 (oz/sq yd) Knit: ASTM D3887 (gm/sq.m)
+5% from contracted weight
Fabric Count Woven- ASTM D3775 Knit: ASTM D3887
+5% from contracted weight
Yarn Size* ( If requested) ASTM D1059 +5% from contracted weight
Defects Visual assessment Report all defects
Dimensional Stability
Laundering – 3 washes AATCC 135 1.Woven 100% Cotton: 4% All other: 3% 1% growth 2.Knit Sueded Fleece/Thermal: 5% x 8% (L X W) Others: 5% 1% growth 3. Differential shrinkage (between shell & lining): 2%
Dry cleaning – 1 cycle *Note: Mandatory test for sport coat/suit
Professional dry clean 2% shrinkage No growth
Skew/Torque AATCC 179, method 1, Option 1 No more than 5% or ½”
Appearance after Laundering/Dry Cleaning
General appearance Visual assessment No distortion, defects, damaged components, excessive puckering, pill- Class 4.0
Appearance After Dry Ironing
General Appearance Hand iron Color Change: Class 4.0 No distortion defects
Colorfastness
CF to Home Laundering AATCC 135 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Commercial Dry cleaning Commercial Dry cleaning- 1 Cycle
Color Change/Staining: Class 4.0; Self-staining: Class 4.5
CF to Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Non-Chlorine Bleach AATCC/ASTM TS-001 Class 4.0
CF to Crocking AATCC 8/116 General: Dry Class 4.0 / Wet Class 3.0
CF to Water: Color block/Contrast trims only AATCC 107 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
51
DXLG – Performance Specifications Sport Coat/Suit Fabric – Spec 701F
Note: See Protocol 500F for Lining Fabric
A- USA Market Page 2 of 3
Test Property Test Method DXLG Requirement
Colorfastness
CF to Light @ 20 AFU AATCC 16, Option 3 Class 4.0 (provide 10AFU for reference when fails at 20 AFU)
*Phenolic Yellowing: Chambray, White, Ivory if > 50% coverage
MTS Method/ITM-075 Class 3.5
Performance
Flammability CFR 1610 Class 1
Seam Slippage (Woven) ASTM D 434 20 lb Min
Tensile strength (Woven) ASTM D5034 (Warp x Weft) < 3.5 oz/yd2 : 25 lbs Min 3.5-5.9 oz/yd2 : 30 lb Min. 6.0- 7.9 oz/yd2 : 40 x 30 lb Min.
≧8.0 oz/yd2 : 60 x 50 lb Min
Tear strength (Woven) ASTM D1424 < 3.5 oz/yd2 : 1.5 lbs Min 3.5 – 5.9 oz/yd2 : 2.5 lb Min. 6.0- 7.9 oz/yd2 : 3.0 lb Min.
≧8.0 oz/yd2 : 4.0 lb Min
Bursting strength (Knit) ASTM D3876 <120 gm/m2 : 40 psi
≧120 gm/m2 : 55 psi
Stretch and recovery (Yarns contain spandex >=5% and in the direction of stretch only)
Woven: ASTM D3107
Woven/knit: Stretch: 15% Min Growth: 5% Max Woven: Recovery (30 sec/30 mins): Min 90%
*pH value (If applicable) (Note 17) AATCC 81 6 – 8
Analytical
*Lead in surface coatings (When request) ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
52
DXLG – Performance Specifications Sport Coat/Suit Fabric – Spec 701F
Note: See Protocol 500F for Lining Fabric
A- USA Market Page 3 of 3
Test Charges USA Asia
Fabric 1-½ yards @ Color @ fabrication
Woven: 195.00 Knit:180.00
Woven: 150.00 Knit: 110.00
Additional colorway – Colorfastness and appearance only
1-½ yards @ Color @ fabrication
80.00 55.00
Turnaround time (TAT) 3-4 working days
Chemical fiber content per fiber 45.00 14.00
Microscopic fiber content
Two cellulosic fiber blend 95.00 65.00
Additional cellulosic fiber 50.00 22.00
One specialty hair fiber 100.00 32.00
Two specialty hair fiber blend 150.00 60.00
Additional specialty fiber 60.00 32.00
Lambs wool per yarn/per fiber 150.00 32.00
Lead Content 65.00 25.00
Phenolic Yellowing Quote 20.00
Water Repellency 110.00 70.00
Water Resistance 60.00 50.00
Note: Protocol base price includes fiber identification of 2 common fibers
*Additional charge Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
53
DXLG – Performance Specifications Component- Spec 800
A- Button Page 1 of 1
Test Property Test Method DXLG Requirement
Effects of Washing/ Dry cleaning AATCC 150- 3 Washes or One commercial Dry Cleaning
No chipping, cracking, paint loss. No color transfer. No Corrosion
*Lead in surface coatings (When request)
ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Attachment Strength BS4162 15.0 lbs @10.0 seconds
Manufacturing Qualities Visual No sharp points or edges
B- Shank Button Test Property Test Method DXLG Requirement
Effects of Washing/ Dry cleaning AATCC 150- 3 Washes or One commercial Dry Cleaning
No chipping, cracking, paint loss. No color transfer. No Corrosion
*Lead in surface coatings (When request)
ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Attachment Strength Pull Method
Straight position Slant position @60°
Straight position (Min. 80 lbs); Slant position@ 60 degrees (Min. 80 lbs) Remark: Please report actual data till break (specify if shank fall apart or fabric ruptured).
Manufacturing Qualities Visual No sharp points or edges
C- Snap
Test Property Test Method DXLG Requirement
Effects of Washing/ Dry cleaning AATCC 150- 3 Washes or One commercial Dry Cleaning
No chipping, cracking, paint loss. No color transfer, No corrosion, detach
*Lead in surface coatings (When request)
ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Attachment Strength ASTM D7142, Option 2 15.0 lbs @10.0 seconds
Manufacturing Qualities Visual No sharp points or edges
D- Zipper Test Property Test Method DXLG Requirement
Effects of Washing/ Dry cleaning AATCC 150- 3 Washes or One commercial Dry Cleaning
No chipping, cracking, paint loss. No color transfer, No corrosion, detach
*Lead in surface coatings (When request)
ASTM E 1613/1645 Shall not exceed 90 ppm (0.009% by weight)
Attachment Strength- Top Stop Zip/Unzip Position; Bottom Stop, Slider Lock & Tab
ASTM D2061 Use zipper requirements (Refer to Appendix 2).
Manufacturing Qualities Visual No sharp points or edges
E- Other Hardware (Includes Fabric with two layers) Test Property Test Method DXLG Requirement
Effects of Washing/ Dry cleaning AATCC 150- 3 Washes or One commercial Dry Cleaning
No chipping, cracking, paint loss. No color transfer, No corrosion, detach
Attachment Strength Pull Method 15.0 lbs @10.0 seconds
Manufacturing Qualities Visual No sharp points or edges
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
54
DXLG – Performance Specifications Elastic – Spec 801
A- USA Market Page 1 of 1
Test Property Test Method DXLG Requirement
Fabric Construction
Elastic Width (mm) Standard Measure As claimed
Elastic Weight ASM D3776
Elastic Construction ASTM D3775
Yarn Size ASTM D1059
Number Of Elastic Yarns Visual
Wrapped Yarns Visual
Construction/workmanship Visual No Major Defects
Dimensional Stability
Laundering – 3 washes AATCC 135 - 4% x 1% growth
Dry cleaning – 1 cycle Professional dry clean 2% shrinkage No growth
Appearance after Laundering/dry Cleaning
General appearance Visual assessment No distortion, defects, excessive puckering, pill- Class 4.0
Stretch & Recovery For Narrow Elastic
Stretch & Recovery In-house Method 1. Elastic Only 2. Garment sample with
elastic
Colorfastness
CF to Home Laundering AATCC 135 1 Wash- Staining: Class 4.0 3 Washes- Color Change: Class 4.0 Self-staining: Class 4.5
CF to Commercial Dry cleaning Commercial Dry cleaning- 1 Cycle
Color Change/Staining: Class 4.0; Self-staining: Class 4.5
CF to Crocking AATCC 8/116 Dry Class 4.0 / Wet Class 3.0
CF to Crocking AATCC 8/116 General: Dry Class 4.0 / Wet Class 3.0
CF to Perspiration AATCC 15 Color Change: Class 4.0 Staining: Class 4.0 Self-staining: Class 4.5
pH value (If applicable) AATCC 81 6 – 8
CF to Ozone # AATCC 109, 1 Cycle Class 3.5
CF to Burnt Gas Fumes # AATCC 23 , 1 Cycle Class 3.5
* Phenolic Yellowing # MTS Method/ITM -75 Class 3.5
# For indigo Dye, White, Ivory if > 50% coverage
A- USA Market Test Charges USA Asia
One colorway for full testing Plus All Color Block Styling for Appearance Only
10 Meter $105 $70
Additional Component– Colorfastness and appearance only
5 Meter@ Color $60 $30
Turnaround time (TAT) 3-4 working days
Phenolic Yellowing Quote 20.00
*Additional charge
Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
55
DXLG – Performance Specifications Special Claims – Spec 802
Page 1 of 4
Test Property Test Method DXLG Requirement
Analytical
*Antibacterial activity assessment of textile materials
AATCC 147 If claimed anti-microbial and/or anti- bacterial: No bacterial colonies in contact area. Test original state / 20 Home Launderings.
Performance
*Water vapor transmission ASTM E96 (B) Upright cup method
Test Original State/3 Home Launderings. Breathable fabric. Greater or equal to 500 g/sq. meter/24 hours
*Air permeability/Windproof Test Original State/3 Home Launderings. Breathable fabric. Adidas TM 6.08
Test Original State/3 Home Launderings. Windproof claim. 1.0 mm/s Maximum
*Absorbency AATCC 79 Test Original State only Moisture Management Maximum 30 seconds.
*Water wicking test MTS S038 Test Original State/5 Home Launderings Moisture Management If claiming “Wicks away moisture” or similar claim. 3 inches minimum at 30 Minutes
*Water repellency: Spray test
AATCC 22 Test Original State/5 Home Launderings Report original and after 5 launderings. Original: ISO 90 minimum After 5 launderings: ISO 70 minimum
*Oil repellency AATCC 118 Test Original State/5 Home Launderings Stain Proof Claim Original: 6 minimum After 5 launderings: 4 minimum
*Water resistance: rain test AATCC 35 Rain Test – Water resistant claim Customs test/garments: No more than 1 gm of water penetration at 600 mm pressure for 2 minute duration
*Waterproof AATCC 127 option 2 or
ASTM D751 option A
Test Original State/5 Home Launderings Waterproof claim 2000 mm w.c. (200 cm w.c. or 196 mbar or 2.86 psi) original and after 5 launderings
*Soil release: oily stain release method
AATCC 130 If claimed Original: Grade 3.5 After 5 launderings: Grade 3.0
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
56
DXLG – Performance Specifications Special Claims – Spec 802
Page 2 of 4
Test Property Test Method DXLG Requirement
Performance
*Wrinkle resistant/Durable press
AATCC 143 Wrinkle Free Claims. Evaluate in original state and after 5 launderings. Postcure Process Smoothness: Grade 4 min Pocket seam: Grade 4 min Seams: Grade 4 min (Seams include collar, yoke, shoulder, cuffs, center placket, front closure, fly, side seams, inseam) Pleats/Creases: Grade 4 min
Wrinkle Resistant Claims. Evaluate in original state and after 5 launderings. Pre-cure Process Smoothness: Grade 3.5 min Pocket seam: Grade 3.5 min Seams: Grade 3.5 min (Seams include collar, yoke, shoulder, cuffs, center placket, front closure, fly, side seams, inseam) Note: No pleat/crease evaluation Postcure Process Smoothness: Grade 3.5 min Pocket seam: Grade 3.5 min Seams: Grade 3.5 min (Seams include collar, yoke, shoulder, cuffs, center placket, front closure, fly, side seams, inseam) Pleats/Creases: Grade 3.5 min
Easy Care Claims. Evaluate in original state and after 5 launderings. Smoothness: Grade 3 min Pocket seam: Grade 3 min Seams: Grade 3 min (Seams include collar, yoke, shoulder, cuffs, center placket, front closure, fly, side seams, inseam) Pleats/Creases: Grade 3 min
*Formaldehyde: (Wrinkle Free/Durable Press Garment only)
JIS L1041 <75 ppm
*pH: (Wrinkle Free/Durable Press Garment only)
AATCC 81 6.0 – 8.0
*Size sticker evaluation MTS S026 -Effect of heat on sticker: 120°±2°F, for 300 hours -Sticker’s durability and residue on fabrics: 120°±2°F, 95% Relative humidity, for 6 hours
Effect of heat on sticker: No wrinkling, no debonding, no curling. Sticker’s durability and residue on fabrics: - No heavy amount of fiber fills on sticker - No amount of adhesive residue remaining sticker - Color change on fabric: 4.0
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
57
DXLG – Performance Specifications Special Claims – Spec 802
Page 3 of 4
Test Property Test Method DXLG Requirement
Performance
*Anti-fade AATCC 150 Additional claims Evaluate after 5/10/15/20 home launderings Color change: Class 4 min
*Anti-pill AATCC 150 Additional claims Evaluate after 5/10/15/20 home launderings Pilling: Class 4 min
* Non-Roll Collar AATCC 150 Additional claims Evaluate after 5/10/15/20 home launderings Collar retains shape without any rolls or defects
*Unbreakable buttons AATCC 143/MTS S001
Additional Claims AATCC 143: Evaluate 30 buttons after 5/10/15/20 home launderings. No chips, cracks or breakage. MTS S001: Evaluate 30 buttons under 5.5 in-oz impact energy. No chips, cracks or breakage.
*Flocking durability MTS S055 Additional Claims Compare original and after 3 home launderings. Wash according to care instructions. No obvious defects/observations affecting the end performance, appearance, color change, staining, satisfactory performance of the components or trim.
*Tagless Labels: Screen print, pad print, heat-set transfer
AATCC 150 Wash or dry clean according to proposed care method. Evaluate and record comments after 5/10/15/20 home launderings or 5 dryclean cycles. Color change: Class 4 min Self staining: Class 4.5 min Appearance: No fraying, unraveling, cracking, or peeling. Text must be legible.
*Ultra violet protection Factor (UPF)
AATCC 183-2004 ASTM D6544-00 2007 ASTM D6603-10
Conduct on “original” and “after simulated use and care” samples. Prepare simulated use and care samples as specificed in ASTM D6544-00. Report UPF rating as per ASTM D6603 following: 15-24: Good UV protection 25-39: Very good UV protection 40-50+: Excellent UV protection
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
58
DXLG – Performance Specifications Special Claims – Spec 802
Page 4 of 4
Test Property Test Method DXLG Requirement
Performance
*Thermal transmittance of textile materials
ASTM D1518 If claimed Report result or verify claim (1 rep) 0.6CLO
*Feather and down content analysis
ASTMD4524- 86 2005 IDFB 3
Original Follow the USA(ADA) Textile Labeling for Feather and Down 2 – 3% tolerance
*Feather and down: Fill Power
IDFB 10 Original Steam conditioning If no claim is made report value only If claimed(min): + or – 5%
*Feather and down: Turbidity
IDFB 11 Original 300 mm minimum US measurement Hypoallergenic/Super Clean Claim: 500 mm minimum
*Feather and down: oxygen number
IDFB 21/IDFB 7 JIS 6.6 EN 1162
Original Less than 10 Hypoallergenic/Super Clean Claim: Less than 5
*Feather and down: odor IDFL Original No putrid odor
*Feather and down: fat and oil
IDFB 4 Original 0.7% min – 2.0% max
*Feather and down: downproofness
FTM 191- Method 5530 (mod)
Original Grade 4 min
*Additional charge
Individual test discount: 35% off local prices
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
59
DXLG – Appendix 1 (DXLG Standard)
DXLG Fastening Standard <zippers> Part 1/3
Following table shows (DXLG Fastening Standard) which is DXLG internal quality control standard.
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
60
DXLG – Appendix 1 (DXLG Standard)
DXLG Fastening Standard <zippers> Part 2/3 Following table shows (DXLG Fastening Standard) which is DXLG internal quality control standard.
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
61
DXLG – Appendix 1 (DXLG Standard)
DXLG Fastening Standard <zippers> Part 3/3
Following table shows (DXLG Fastening Standard) which is DXLG internal quality control standard.
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
62
DXLG – Appendix 2 The Rating of Test Specimen after Random Tumble Pilling Test
(ASTM D3512)
Satisfactory
Modern Testing Services, LLC
Oct. 22, 2013
Revised: 2013-02 NW& AW
63
Unsatisfactory