TABLE OF CONTENTS...• Multi-purpose galvanized bracket supports various application solutions •...

1www.holdrite.com 1

TABLE OF CONTENTSCONTENT PAGE

Company Overview...............................................................................2

“Converting Makeshift Methods............................................................3 into Engineered Solutions”SM

“VIP Value-Added Services”..................................................................4

PEX Tubing Solutions......................................................................5-10

CPVC Tubing Solutions..................................................................11-13

Copper Tubing Solutions - Residential/Commercial......................14-16

Pre-Fab/Specialty Solutions..........................................................17-19

Overhead Support Solutions..........................................................20-23

Telescoping Support Solutions.......................................................24-26

Acoustical Solutions......................................................................27-30

Inserts, Isolators, Clamps...............................................................31-34

Water Heater and Equipment Supports.........................................35-37

“Quick Search by Application”........................................................38-44

Material Take-Off Sheet & Product Index......................................45-47

Distribution and Shipping....................................................................48

Hubbard Enterprises/HOLDRITE®

2560 Progress StreetVista, CA 92081(800) 321-0316

© 2009 Hubbard Enterprises/HOLDRITE. All rights reserved.Products shown may be protected by U.S. Patent or have Patents Pending.

2 (800) 321-0316 • Fax: (760) 744-05072

COMPANY OVERVIEWSince the introduction of the first HOLDRITE® Copper-bonded™ bracket over 27 years ago, Hubbard Enterprises/HOLDRITE® has become a leading manufacturer known for innovative products and services that help Mechanical and Plumbing Contractors reduce their installation costs, while ensuring consistent craftsmanship. By under-standing both the large project perspective and specific application requirements, HOLDRITE has developed solutions that assist in establishing a “shop standard” for both residential and commercial Contractors. Over the years, Contractors have made HOLDRITE the plumbing industry standard for “Converting Makeshift Meth-ods into Engineered Solutions”SM. HOLDRITE products have been installed into a wide variety of projects from single-family and multi-family housing to hotels/motels, healthcare, institutions, and many other market sectors.

The construction industry has seen fluctuating material costs and challenging market conditions, resulting in Contractors looking to reduce their overall installation costs to stay competitive and grow their market share. This has significantly influenced changes in material type preferences and installation methodologies. Hubbard En-terprises/HOLDRITE continues to listen to the Contractor, Wholesaler, and Engineer to develop innovative products that support Copper, PEX, CPVC tubing, and other material types. Additionally, HOLDRITE is an industry leader in such categories as noise and vibration isolation and water heater support.

HOLDRITE also offers value-added, No Cost Services to the Contractor, Wholesaler, and Engineer to assist with multiple stages in the project. VIP Services include specification and submittal assistance, 3-D product drawings, custom detail applica-tion pages, and material “take-off” assistance to help a Contractor or Wholesaler plan for product inventory levels.

As the plumbing industry continues to evolve, Hubbard Enterprises/HOLDRITE will also stay at the forefront of new trends that will make a significant impact to the Mechanical and Plumbing Contractor.

Innovative and proven products named as “Top Products” by Contractors and leading industry trade publications. Examples include:

HOLDRITE® Silencer™ System (pg. 27)

QUICK STAND™ Wall Mount Platform (pg. 36)

PEXRITE® System (pg. 5)

HOLDRITE Supports Canada

3www.holdrite.com

MAKESHIFTMETHODS

LAVATORY / SINK

WATER HEATER SUPPORT

VERTICAL

SHOWER HEAD

ENGINEEREDSOLUTIONS

3

ENGINEEREDSOLUTIONS

(800) 321-0316 • Fax: (760) 744-0507VIP SERVICES

CONTRACTOR SERVICES

VIP Estimating Cost Savings Analysis

COST SAVINGS

Application Holdrite Product(s)

“Installed Cost” Savings Examples Shown @ $40.00/Hr. Labor Rate)

Overhead Cast-In-Place Hanger 125-D $7.40 (Double Pipe Run)

Suspended Equipment Platform 40-SWHP-A $8.33Lavatory Sink (PEX-to-Copper Stub Out)

103-18/701 $1.86

Flush Valve Support 114-CO $1.18Overhead Med-Gas Trapeze EZ-1/250 $16.90

HOLDRITE APPLICATION SAVINGS EXAMPLES

LABOR COST CALCULATOR

4

• No Cost material “Take-Off” for your next job

• Performed by Estimators with over 20 years of plumbing experience

• Savings analysis based on material and installation costs resulting from using HOLDRITE® products

• Custom “Detailed Drawing” pages for each application in PDF or DWG CAD formats

• 3-D Product drawings available in 5 formats!

• Ideal for establishing “Shop Standards”

• Specification and Submittal assistance

Support and Alignment SolutionsPEX

• Minimizes Concealed Joints• Reduces In-Wall Fittings• Flame-Free Environment at Stub-Out Location• Compatible with All PEX Manufacturers

PEXRITE®

APPLICATIONSOLUTIONS

PEX SOLUTIONS 5www.holdrite.com

6 (800) 321-0316 • Fax: (760) 744-0507

COPPERPEXRITE® LOCK-N-LOADTM #701

Designed for PEX, Copper and CPVC

Tightens by Hand - No toolsor hardware required

Eliminates Soldering

Secure fit prevents forward and backward movement

PEXPEXRITE® TURN-OUT #704

Eliminates In-Wall Fittings, Concealed Joints and Soldering

Installs Directly to Stud

Provides 360° Turning Radiusin PEXRITE® Brackets

Reduces noise and vibration

2

4

65

3

1PEXRITE TURN-OUT #704 INSTALLATION INSTRUCTIONS

Install PEXRITE® bracket to studs

Position 704 until bracket fits into groove, then rotate into place

Bend tube forward and snap into 704

Insert PEX tube at 45º angle and set stub-out length

No concealed joint in the wall

Insert 704 into bracket from the front

6

4

2

3

1

Push and twist back nut by hand until tight

PEXRITE LOCK-N-LOAD #701 INSTALLATION INSTRUCTIONSInstall PEXRITE® bracket to studs

Lock 701 into bracket with thumbs

Insert 701 into bracket from front

Load tubing through 701 from back

Secures stub-out with no solder5

#103-18

PEXRITE®

Pick YourStub-OutMethod

PEX SOLUTIONS

7www.holdrite.com PEX SOLUTIONS

Model# Bracket Size For Pipe Size(s) Box Qty103-18 20” 1/2”, 3/4 “, 1” CTS 50103-26 26” 1/2”, 3/4 “, 1” CTS 50

• Versatile bracket ideal for sink, lavatory & water closet plumbing solutions• Galvanized steel bracket with 1-3/8” keyed holes on 2” centers• Integrates with PEXRITE #701 & #704 with patented connection and other HOLDRITE inserts

HOLDRITE – #103-18, #103-26

Model# Size For Pipe Size(s) Box Qty704 3-1/4” X 5-1/2” 3/8” - 1/2” CTS 100

• PEX turnout integrates with #103, #110-R, and #709 series brackets• Install directly to stud • Reduces in-wall fittings and concealed joints • Provides 360-degree turning radius• Torch-free environment at stub-out location • Eliminates the need for costly copper bullets • Compatible with all PEX tubing manufacturers

PEXRITE – #704

• Stub-out clamp ideal for 1/2” CTS PEX-to-Copper transition at lavatory/sink or toilet• Integrates with #103, #110-R, and #709 series brackets• Compatible with PEX, Copper, and CPVC• Tightens by hand - No tools required• Eliminates soldering• Secure fit prevents forward and backward movement

HOLDRITE LOCK-N-LOAD™ – #701

Model# For Pipe Size(s) Kit Qty 6PAK Qty Case Qty704-PR 3/8” - 1/2” CTS 1 6 36

• PEX stub-out kit for lavatory/sink or toilet• Includes (1) #103-18 galvanized bracket and (2) #704 turn-outs• Installation photos on packaging. Great for Counter Sales.• Available in Contractor kit, 6PAK, and Wholesaler point-of-purchase (POP) display

PEXRITE – #704-PR KIT

• PEX stub-out kit for lavatory/sink or toilet• Includes (1) #103-18 galvanized bracket, (2) #701 stub-out clamps, and (2) 1/2” CTS 3.5” x 8” Copper Ells• Installation photos on packaging. Great for Counter Sales.• Available in Contractor kit, 6PAK, and Wholesaler point-of-purchase display• Confirm compatibility of Copper Ells with PEX tubing manufacturer

PEXRITE – #701-PR KIT

Model# Size For Pipe Size(s) Box Qty701 2” x 1-3/4” 1/2” CTS 50

Model# For Pipe Size(s) Kit Qty 6PAK Qty Case Qty701-PR 1/2” CTS 1 6 36

NEW

NEW

NEW

8 (800) 321-0316 • Fax: (760) 744-0507

HOLDRITE – #110-R

Model# Bracket Size For Pipe Size(s) Box Qty110-R 2-1/8” X 1-7/8” 1/2”, 3/4 “, 1” CTS 50

• Ideal for lavatory/island sink• Galvanized steel bracket with “key design” allows integration with various HOLDRITE inserts, #701, and #704 • Allows for easy Pre-fabrication at the shop or in the field • Install directly to the waste/vent pipe prior to studs being erected• Supports 4” and 8” centers• Self-locking stainless steel band & isolating felt included

• Stub-out clamp and Copper Ell in bulk packaging• #701-0536P includes 1/2” CTS #701 stub-out clamp and 1/2” CTS 3.5” x 6” Copper Ell• #701-0538P includes 1/2” CTS #701 stub-out clamp and 1/2” CTS 3.5” x 8” Copper Ell

PEXRITE – #701-0536P, #701-0538P

Model# Copper Ell Size For Pipe Size(s) Box Qty

701-0536P 1/2” CTS 3.5” x 6” 1/2” CTS PEX tubing 25 Clamps/25 Copper Ells

701-0538P 1/2” CTS 3.5” x 8” 1/2” CTS PEX tubing 25 Clamps/25 Copper Ells

Model# Size For Pipe Size(s) Box Qty103-18-701 20” Bracket 1/2” CTS 50 Brackets/100 Clamps103-26-701 26” Bracket 1/2” CTS 50 Brackets/100 Clamps

• Ideal for lavatory/sink and toilet• Sold in bulk packaging• #103-18-701 includes 20” brackets and 1/2” CTS #701 stub-out clamps• #103-26-701 includes 26” brackets and 1/2” CTS #701 stub-out clamps

HOLDRITE – #103-18-701, #103-26-701

Model# Bracket Size For Pipe Size(s) Box Qty721 2-3/4” X 3-3/8” 3/8” - 1” CTS 50

• Attaches to framing or directly to HOLDRITE Stout Bracket®

• Ideal for lavatory or water closet support• Galvanized steel bracket with 1-3/8” keyed hole• Allows for 360-degree orientation when used with #701/#704

HOLDRITE – #721

PEX SOLUTIONS

HOLDRITE – #709, #709-L, #709-EXT • Ideal for water closets and hose bibs• Galvanized steel brackets with 1-3/8” keyed holes • Allows for 360-degree orientation when used with #701/#704 • #709 provides 4-1/4” and 6-1/4” center line heights • #709-L provides 1-3/8” and 3-3/8” center line off stud/plate (3” & 5” off floor)• #709-EXT provides 2”, 4”, 6”, and 8” center line off plate or floor

Model# Bracket Size For Pipe Size(s) Box Qty709 7-1/2” X 2” 3/8” - 1” CTS 50

709-L 4-1/4” X 3-1/4” X 2” 3/8” - 1” CTS 50709-EXT 9” X 2-1/8” X 2” 3/8” - 1” CTS 50

#709

#709-L

#709-EXT

NEW

NEW

9www.holdrite.com PEX SOLUTIONS

HOLDRITE STOUT BRACKET® – #SB1S, #SB2S

Model# Bracket Size For Pipe Size(s) Box QtySB1S 10” to 18” Various 50SB2S 13” to 25” Various 50

• Multi-purpose galvanized bracket supports various application solutions • Ideal for lavatory, shower, water closet, vertical, horizontal and much more• Telescoping design supports PEX, Copper, CPVC, and other types of piping • Numerous components integrate into multiple sides of the Stout Bracket • Provides superior strength and versatility• Includes four screws

• Ideal for lavatory, water closet, and tub spout support• Extruded holes provide additional soldering surface• Ideal for PEX-to-Copper bullets• Copper-bonded steel bracket • #101-18-R provides 5/8” holes on 2” centers • #101-26-R provides 5/8” holes on 2” centers and two 7/8” holes on 8” centers

HOLDRITE – #101-18-R, #101-26-R

Model# Bracket Size For Pipe Size(s) Box Qty101-18-R 20” 1/2” CTS 25101-26-R 26” 1/2” CTS 25

• Single run PEXRITE POP-UP for RADIANT HEATING or other in-slab PEX tubing support (1-1/2” - 3-1/2” thick slab)• Unique design allows for side-entry of tubing• Mounts to form decking or slab-on-grade with rebar• Manifold capability with interlocking feet

PEXRITE POP-UP™ – #706

Model# Size For Pipe Size(s) Box Qty706 5-1/3” x 5” x 2-1/2” 3/8” & 1/2” CTS 50

• Single run PEXRITE POP-UP for in-slab flexible tubing support• Manifold capability with interlocking feet• Compatible with PEX, soft Copper, flexible conduit• #707 design allows for side-entry of tubing• #707-E design allows for easy zip tie installation• Mounts to form decking or slab-on-grade with rebar

PEXRITE POP-UP™ – #707, #707-E

Model# Size For Pipe Size(s) Box Qty707 8-1/2” X 8-5/8” X 1-1/4” 3/8” thru 7/8” O.D. 25

707-E 8-1/2” X 8-5/8” X 1-1/4” 3/8” thru 1-1/2” O.D. 25

#707

#707-E

• Turn-out support for 3/8” and 1/2” CTS PEX tubing• Ideal for lavatory/sink & toilet stub-out and overhead 90° turn• Mount to block of wood or other flat surface• Unique design allows for side-entry of tubing

PEXRITE – #705

Model# Size For Pipe Size(s) Box Qty705 5-1/3” x 4-1/8” x 2-1/2” 3/8” & 1/2” CTS 50

NEW

NEW

NEW

(800) 321-0316 • Fax: (760) 744-050710 PEX SOLUTIONS

• Double run PEXRITE POP-UP for in-slab flexible tubing support• Manifold capability with interlocking feet• Compatible with PEX, soft Copper, flexible conduit• Unique design allows for side-entry of tubing• Mounts to form decking or slab-on-grade with rebar

PEXRITE POP-UP™ – #708

Model# Size For Pipe Size(s) Box Qty708 10-1/2” X 11-1/8” X 2-1/2” 3/8” thru 1-1/8” O.D. 15

Model# Hole Needed For Pipe Size(s) Box Qty104 1-3/8” Diameter 1/2” CTS 100105 1-3/8” Diameter 3/4” CTS 100106 1-3/8” Diameter 1” CTS 100

• Ideal for pipe support with HOLDRITE #121 & #103 series brackets• Compatible with PEX, Copper, and CPVC tubing

HOLDRITE INSERTS – #104 - #106

• Ideal for metal studs with PEX, Copper, and CPVC tubing• Integrates with most HOLDRITE galvanized brackets • Flame-rated per UL 94 V-2 standards• Fits in 1-3/8” or 1-11/32” holes

HOLDRITE INSERTS – #404-R - #406-R

Model# Hole Needed For Pipe Size(s) Box Qty404-R 1-3/8” Diameter 1/2” CTS 100405-R 1-3/8” Diameter 3/4” CTS 100406-R 1-3/8” Diameter 1” CTS 100

• Double run PEXRITE POP-UP for in-slab PEX tubing, flexible conduit, & rigid conduit 90s.• Unique design allows for easy zip tie installation• Mounts to form decking or slab-on-grade with rebar• Manifold capability with interlocking feet

PEXRITE POP-UP™ – #708-E

Model# Size For Pipe Size(s) Box Qty708-E 10-1/2” x 11-1/6” x 3-1/4” 3/8” thru 2-1/2” IPS 15

• Ideal for metal thru-stud applications and integrates with HOLDRITE #121 and #125 series brackets• Positioning and dissimilar metal isolation for Copper, CPVC, and PEX tubing• Meets UL 94 HB requirements

HOLDRITE ISOLATORS – #424 - #426

Model# Hole Size Pipe Size Bag Qty

MasterCarton Qty

424 1-11/32” & 1-3/8” 1/2” CTS 50 250425 1-11/32” & 1-3/8” 3/4” CTS 50 250426 1-11/32” & 1-3/8” 1” CTS 50 250

NEW

NEW

11

Support and Alignment SolutionsCPVC

• LOCKRITE™ & HOLDRITE® Systems for CPVC Pipe Support• Inserts are Lockable and Glueable• Grooved Inserts Create Stronger Glue Joint• Compatible with CPVC Tubing and Cements • Some Application Solutions Require No Glue

LOCKRITE™/HOLDRITE® APPLICATIONSOLUTIONS

CPVC SOLUTIONSwww.holdrite.com

12 (800) 321-0316 • Fax: (760) 744-0507CPVC SOLUTIONS

Model# Bracket Size For Pipe Size(s) Box Qty609-N-6 6-3/4” X 5” 1/2”, 3/4” CTS 50

• Ideal for water closet or hose bib stub-outs & functions as a nail plate• Use in conjunction with #604 and #605 glueable inserts• 16-gage galvanized steel bracket supports various heights from 2-1/4” – 6”

LOCKRITE – #609-N-6

HOLDRITE STOUT BRACKET® –#SB1S, #SB2S, #211, #212• Multi-purpose galvanized bracket supports various application solutions • Ideal for lavatory, shower, water closet, vertical, horizontal and much more• Telescoping design supports CPVC, PEX, Copper and other types of piping • Numerous components integrate into multiple sides of the Stout Bracket • Includes four screws• CPVC tubing glues directly to clamp• Meets UL 94 V-0 requirements

Model# Size For Pipe Size(s) Box QtySB1S 10” to 18” Various 50SB2S 13” to 25” Various 50211 1” X 1-1/4” 1/2” CTS 100212 1” X 1-3/8” 3/4” CTS 100

• Versatile bracket ideal for sink, lavatory & water closet plumbing solutions• Galvanized steel bracket with 1-3/8” keyed holes on 2” centers• Integrates with HOLDRITE #701 and other HOLDRITE inserts

HOLDRITE – #103-18, #103-26

Model# Bracket Size For Pipe Size(s) Box Qty103-18 20” 1/2”, 3/4”, 1” CTS 50103-26 26” 1/2”, 3/4”, 1” CTS 50

Model# Size For Pipe Size(s) Box Qty701 2” x 1-3/4” 1/2” CTS 50

• Stub-out clamp ideal for lavatory/sink and toilet applications• Integrates with #103, #110-R, and #709 series brackets• Compatible with CPVC, PEX, and Copper• Tightens by hand - No tools required• Eliminates glue at the stub-out application • Secure fit prevents forward and backward movement

HOLDRITE LOCK-N-LOAD™ – #701

• Ideal for lavatory, sink, and water closet stub-out support• Galvanized steel bracket provides proper pipe positioning and alignment• Inserts are lockable and glueable• Inserts are grooved, creating a stronger glue joint

LOCKRITE – #601-20, #601-26, #604, #605

Model# Size For Pipe Size(s) Box Qty601-20 20” 1/2”, 3/4” CTS 50601-26 26” 1/2”, 3/4” CTS 50

604 1” Diameter 1/2” CTS 100605 1” Diameter 3/4” CTS 100

#604

#601-20

NEW

#SB1S

#211

13www.holdrite.com

Model# Clamp Size For Pipe Size(s) Bag Qty221 1-7/8” X 1-1/2” 1/2” CTS 100222 1-7/8” X 1-3/4” 3/4” CTS 100223 2-3/8” X 2-1/8” 1” CTS 50224 2-7/8” X 2-3/8” 1-1/4” CTS 25225 2-7/8” X 2-3/4” 1-1/2” CTS 25226 3-3/8” X 3-1/8” 2” CTS 25231 2” X 7/8” 1/2” CTS 100232 2-3/8” X 2-1/8” 3/4” CTS 100233 2-3/4” X 2-1/2” 1” CTS 50234 2-3/4” X 1-3/4” 1-1/4” CTS 25

235 3-1/8” X 2” 1-1/2” CTS 25236 3-1/2” X 2-1/2” 2” CTS 25

• Ideal for CPVC, PEX, and Copper tubing• #221 - #226 are suspension clamps• #231 - #236 are standard clamps

HOLDRITE CLAMPS – #221 - #226, #231 - #236

CPVC SOLUTIONS

HOLDRITE STOUT BRACKET® – #SB3, #SB4• Ideal for shower head, tub spout, vertical mid-span, and much more• Supports both 2-eared and 3-eared 90s• Telescoping design supports CPVC, PEX, and Copper tubing• Integrates with several HOLDRITE clamps and other industry standard components

Model# Bracket Size For Pipe Size(s) Box QtySB3 10-1/4” to 17-1/2” Various 50SB4 15-1/4” to 25-1/2” Various 50

NEW

• Metal thru-stud applications & integrates with HOLDRITE #121/#125 brackets• Positioning and dissimilar metal isolation for CPVC, PEX, and Copper tubing• #424-#426 meets UL 94 HB requirements• #424-C - #426-C are glueable with CPVC tubing

HOLDRITE ISOLATORS – #424 - #426, #424-C - #426-C


MasterCarton Qty

424 1-11/32” & 1-3/8” 1/2” CTS 50 250425 1-11/32” & 1-3/8” 3/4” CTS 50 250426 1-11/32” & 1-3/8” 1” CTS 50 250

424-C 1-11/32” & 1-3/8” 1/2” CTS 50 250425-C 1-11/32” & 1-3/8” 3/4” CTS 50 250426-C 1-11/32” & 1-3/8” 1” CTS 50 250

NEW

#221

#231

Model# Size For Pipe Size(s) Box Qty170 18” Bracket Various 50

170-26 26” Bracket Various 50251 2-3/8” x 2-3/4” 1/2”, 3/4”, 1” CTS 50

170-251 18” Bracket 1/2”, 3/4”, 1” CTS 50 Brackets/100 Clamps170-26-251 26” Bracket 1/2”, 3/4”, 1” CTS 50 Brackets/100 Clamps

• Low cost pipe support solution • No tools or hardware required for clamp• #170-251, #170-26-251 sold in bulk packaging

HOLDRITE Rapid System™ – #170, #170-26, #251, #170-251, #170-26-251

#170

#251

NEW

14

Support and Alignment Solutions

COPPER-BONDED™RESIDENTIAL/COMMERCIAL

• Unique Copper Bonding Process• Heat the Pipe Not the Bracket• Solutions for Various Applications• Support 1/2” to 1-1/4” CTS• Designed for Stud Bays up to 24”

HOLDRITE®


COPPER-BONDEDRESIDENTIAL/COMMERCIAL SOLUTIONS (800) 321-0316 • Fax: (760) 744-0507

www.holdrite.com 15

HOLDRITE – #101-18, #101-26, #101-18-R, #101-26-R

Model# Size For Pipe Size(s) Box Qty101-18 20” 1/2” CTS 50101-26 26” 1/2” CTS 50

101-18-R 20” 1/2” CTS 25101-26-R 26” 1/2”, 3/4” CTS 25

• Ideal for lavatory and water closet• Ideal for copper bullets requiring a more rigid installation• Copper-bonded, steel bracket • #101-18-R & #101-26-R extruded holes provide additional soldering surface• 5/8” holes on 2” centers (#101-26-R also has two 7/8” holes on 8” centers)

• Ideal for water heater and relief line applications• Copper-bonded, heavy-gage steel bracket• Alternating 7/8” and 1-1/8” holes on 4” centers

HOLDRITE – #102-18, #102-26

Model# Size For Pipe Size(s) Box Qty102-18 20” 3/4”, 1” CTS 50102-26 26” 3/4”, 1” CTS 50

• Ideal for multiple applications such as lavatory, water closet and water heater• Rolled edges for extra strength and extruded holes for additional soldering surface• Copper-bonded steel bracket • Holes on 2” centers for 1/2” tubing and holes on 4” centers for 3/4” & 1” tubing

HOLDRITE – #108-20, #108-26

Model# Size For Pipe Size(s) Box Qty108-20 20” 1/2”, 3/4”, 1” CTS 50108-26 26” 1/2”, 3/4”, 1”, CTS 50

COPPER-BONDEDRESIDENTIAL/COMMERCIAL

SOLUTIONS

• Ideal for multiple applications such as lavatory, water closet and water heater• Copper-bonded, heavy-gage steel bracket• Holes on 2” centers for 1/2” tubing and holes on 4” centers for 3/4” & 1” tubing• #107-26 also has two holes for 1-1/4” tubing on 8” centers

HOLDRITE – #107-18, #107-26

Model# Size For Pipe Size(s) Box Qty107-18 20” 1/2”, 3/4”, 1” CTS 50107-26 26” 1/2”, 3/4”, 1”, 1-1/4” CTS 50

Model# Size For Pipe Size(s) Box Qty100-18 20” 1/2” CTS 100

• Ideal for lavatory/sink or water closet• Unique design and manufacturing process for low cost bracket• Copper-bonded, steel bracket• 5/8” holes on 2” centers

HOLDRITE – #100-18NEW

NEW

(800) 321-0316 • Fax: (760) 744-050716

HOLDRITE – #170-C, #170, #170-S

Model# Size For Pipe Size(s) Box Qty170-C 18” X 5/8” Various 50170 18” X 5/8” Various 50

170-S 18” X 5/8” Various 50

• Ideal for multiple applications • Supports tubing in vertical and horizontal positions• #170-C is a Copper-bonded, steel bracket• #170-S is galvanized steel bracket with (2) screws#170-C

#170

• Ideal for water closet applications and also functions as a nail plate • Copper-bonded, heavy-gage steel bracket• Supports 1/2” stub-outs at various heights from 2-1/4” – 6” and 3/4” at 3-1/2” height

HOLDRITE – #109-N-6

Model# Size For Pipe Size(s) Box Qty109-N-6 6-1/2” 1/2”, 3/4” CTS 50

Model# Size For Pipe Size(s) Box Qty109-A-9 9-1/2” 1/2” CTS 50

• Ideal for water closet applications• Copper-bonded, heavy-gage steel L-bracket • Six 5/8” holes at 2-3/4”, 4-1/2”, 6”, 7”, 8” and 9” • Most holes are extruded for additional strength

HOLDRITE – #109-A-9

COPPER-BONDEDRESIDENTIAL/COMMERCIAL SOLUTIONS

• #140 is ideal for lavatory, water closet and water heater applications• Ideal for tubing that is capped prior to soldering onto bracket • #141 is ideal for tub spout and shower diverter installations with split ends for horizontal and vertical mounting adding extra versatility• Extruded notches for 1/2” tubing on 1” centers and 3/4” tubing on 4” centers

HOLDRITE – #140, #141

Model# Size For Pipe Size(s) Box Qty140 20” 1/2”, 3/4” CTS 50141 20” 1/2”, 3/4” CTS 50

• Ideal for multiple applications such as lavatory, water closet, & water heater• 5/8” and 7/8” holes on 4” centers • Copper-bonded, heavy-gage steel bracket

HOLDRITE – #150-20, #150-26

Model# Size For Pipe Size(s) Box Qty150-20 20” 1/2”, 3/4” CTS 50150-26 26” 1/2”, 3/4” CTS 50

• #101-F is ideal for Copper tubing penetrating through the floor; 5/8” extruded hole• #130-#132 is ideal for lavatory/sink, water closet, water heater, & others; Solid Copper clip for support of 1/2”, 3/4”, and 1” tubing

HOLDRITE – #101-F, #130 - #132

Model# Size For Pipe Size(s) Box Qty101-F 3” X 1-1/4” 1/2” CTS 50130 2-1/4” X 2” 1/2” CTS 100131 2-1/4” X 2-3/8” 3/4” CTS 100132 2-1/4” X 2-5/8” 1” CTS 100#130

#101-F

#141

#140

17PRE-FAB/SPECIALTY

Support and Alignment SolutionsPRE-FAB/SPECIALTY

• Unique Copper Bonding Process• Heat the Pipe not the Bracket• Allows Installation of Rough-In Prior to Studs Being Erected• Horizontal and Vertical Solutions• Ideal System for the Pre-fabrication Shop• Rigid, Quality and Professional Installation

HOLDRITE®


www.holdrite.com

18 (800) 321-0316 • Fax: (760) 744-0507PRE-FAB/SPECIALTY

Model# Size For Pipe Size(s) Box Qty110-S-1/2 9-1/4” X 2-1/2” 1/2” CTS 50

•Idealforlavatoryandsink•Easypre-fabricationattheshoporonthejobsite•Installdirectlytothewaste/ventpipepriortostudsbeingerected•Copper-bonded,heavy-gagesteelbracket•Self-lockingstainlesssteelbandandself-adhesiveisolatingfeltincluded•For1/2”Coppertubingon4”,6”and8”centers

HOLDRITE – #110-S-1/2

•Idealforlavatory/sinkstuboutsorverticalmid-spansupport•Easypre-fabricationattheshoporonthejobsite•Installdirectlytothewaste/ventpipepriortostudsbeingerected•Copper-bonded,heavy-gagesteelbracket•#118-T-6Supports1/2”tubingon4”and8”centersand3/4”tubingon6”centers•#118-T-8Supports1/2”tubingon4”and6”centersand3/4”tubingon8”centers•Fitswithina2-1/2”studwall•Self-lockingstainlesssteelbandandself-adhesiveisolatingfeltincluded

HOLDRITE – #118-T-6, #118-T-8

Model# Size For Pipe Size(s) Box Qty118-T-6 9-1/8”X1-3/4”X1-1/2” 1/2”,3/4”CTS 50118-T-8 9-1/8”X1-3/4”X1-1/2” 1/2”,3/4”CTS 50

HOLDRITE – #111-S•Idealforverticalorhorizontalinstallationsandfitsin3-1/2”orwiderwall•Copper-bonded,steelbracketmountsdirectlytowaste/ventpipe•Self-lockingstainlesssteelbandandself-adhesiveisolatingfeltincluded•Supports1/2”tubingon4”,6”,8”centersand3/4”tubingon4”and8”centers

Model# Size For Pipe Size(s) Box Qty111-S 9-1/2” X 1-1/2” 1/2”,3/4”CTS 50

•Multiplehorizontal/verticalmountingapplications•Easypre-fabricationattheshoporonthejobsite•Galvanizedsteelbracketmountsdirectlytothewaste/ventpipeprior tostudsbeingerected•Supports1/2”to2”tubingandcomeswithself-lockingstainlesssteel band,metalstraps,screwsandself-adhesiveisolatingfeltstrip

HOLDRITE – #115, #115-C

Model# Size For Pipe Size(s) Box Qty115 7-1/2” X 2” 1/2”-2”CTS/IPS 25

115-C 7-1/2” X 2” 1/2”-2”CTS/IPS 25#115-C

#115

•IdealforNoHubDWVjointsinexcessivepressuresituations•PreventsseparationofNoHubpipeandfittingsatchangeofdirection•Steelbandwithstainlesssteelclamps•#117-3D-#117-8D(SupplementalKits)foraddeddiagonalsupport

HOLDRITE – #117-3 - 117-8, #117-3D - #117-8D

Model# Size For Pipe Size(s) Box Qty117-3 OutsideBendSupportKit 2”-3”IPS 6117-4 OutsideBendSupportKit 4”IPS 6117-6 OutsideBendSupportKit 6”IPS 6117-8 OutsideBendSupportKit 8”IPS 6117-3D DiagonalSupportKit 2”-3”IPS 6117-4D DiagonalSupportKit 4”IPS 6117-6D DiagonalSupportKit 6”IPS 6117-8D DiagonalSupportKit 8”IPS 6

#117-4

#117-4D

19www.holdrite.com

•Idealforlavatory/sinkstuboutsorverticalmid-spansupport•Easypre-fabricationattheshoporonthejobsite•Installdirectlytothewaste/ventpipepriortostudsbeingerected•Copper-bonded,heavy-gagesteelbracket•#118-T-6Supports1/2”tubingon4”and8”centersand3/4”tubingon6”centers•#118-T-8Supports1/2”tubingon4”and6”centersand3/4”tubingon8”centers•Fitswithina2-1/2”studwall•Self-lockingstainlesssteelbandandself-adhesiveisolatingfeltincluded

PRE-FAB/SPECIALTY

Model# Size For Pipe Size(s) Box Qty114-C 23-1/4”X2-1/2” 1” CTS 6

114-CO 23-1/4”X2-1/2” 1” CTS 6114-CR 23-1/4”X2-1/2” 1” CTS 6

•For1”flushvalvesupportonwallhungtoiletcarriers•Copper-bonded,heavy-gagesteelbracketsmountdirectlyto4-bolttoilet carrierandpositionflushvalveatheightof11-1/2”abovetoilet•Allowsforrough-inpriortoframingbeingerected•4-1/2”offsetcenterlinerough-inwith#114-Cand#114-CR•#114-COprovides4-3/4”offsetrough-in(rightorlefthand)•#114-CRallowsforsupportofpre-cappedstubout

HOLDRITE – #114-C, #114-CO, #114-CR

#114-C

#114-CO

#114-CR

Model# Size For Pipe Size(s) Box Qty114-C-EXT 27” X 1” N/A 6

•Idealforwaterclosetcarrierswhereextendedrough-inheightisneeded•Copper-bonded,heavy-gagesteelbracketsmountdirectlyto4-bolt closetcarrier•Addsanadditional8-1/2”to24-1/2”heighttocarrierbracket (includeshardware)•CompatiblewithHOLDRITE#114seriesbrackets

HOLDRITE – #114-C-EXT

•Idealforhorizontalapplicationssuchasplumbingchasewalls•Easypre-fabricationattheshoporonthejobsite•Mountstowaste/ventpipeorbuildingstructurepriortostuds beingerected•Copper-bonded,heavy-gagesteelbracket•Supports1/2”to3”tubingwitha250-poundloadcapacity•Comeswithself-lockingstainlesssteelbandandisolating feltpad

HOLDRITE – #V-2

Model# Size For Pipe Size(s) Box QtyV-2 4-1/2” X 4-1/2” 1/2”-3”CTS 25

•Idealforverticalsingleruns•Installdirectlytothewaste/ventpipeorbuildingstructurepriortostuds beingerected•Galvanizedsteelbracket•Useinconjunctionwith#100seriesinserts&#1004/#1005steelbands•Unique“U”shapesupportfor1/2”,3/4”,and1”tubing

HOLDRITE – #121

Model# Size For Pipe Size(s) Box Qty121 2” X 1-1/2” 1/2”,3/4”,1”CTS 25

Model# Size For Pipe Size(s) Box Qty110-R 10”X2-3/4” 1/2”,3/4”,1”CTS 50

•Idealforlavatoryandsink•Easypre-fabricationattheshoporonthejobsite•Installdirectlytothewaste/ventpipepriortostudsbeingerected•Galvanizedsteelbracketwithkeydesignallowseasyintegrationfor #100series,#400seriesand#260seriesinserts•Supportson4”and8”centers•Self-lockingstainlesssteelband&self-adhesiveisolatingfeltincluded

HOLDRITE – #110-R

20

Support and Alignment SolutionsOVERHEAD

• Overhead Pipe Support for Copper, PEX, CPVC, and others • High & Tight Runs, Single & Multiple Runs• Versatility with Cast-In-Place Concrete Slabs, All-Thread Rod, and Direct to Ceiling

HOLDRITE®


OVERHEAD SOLUTIONS (800) 321-0316 •Fax: (760) 744-0507

Flame Rated = UL 94 V-2

Smoke & Flame Rated = ASTM E84 25/50 & UL 94 V-0

21www.holdrite.com 21

OVERHEAD HOLDRITE EZ-STRUT™ – #EZ-1, #EZ-2

Model# Size For Pipe Size(s) Box QtyEZ-1 12”to21” Various 25EZ-2 23”to40” Various 25

•IdealformultiplepiperunapplicationsincludingGas,Copper, CPVC,&PEX•Galvanizedsteeltrapezeplatformwithtelescopingdesign•WorksbestwithHOLDRITE#250and#280Clamps•Attachestostandardall-threadrodwithloadratingupto1,000pounds•Includesfourscrews

OVERHEAD SOLUTIONS

•IdealforsecuringtubingtoEZ-Struttrapezeplatform•Sound-rated/isolationvariableclosureclamps•FireretardantframeworkmeetsrequirementsofUL94V-2rating•Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds

HOLDRITE VARIABLE CLAMPS – #250, #280

Model# Size For Pipe Size(s) Box Qty250 2-3/8”X2-5/8” 3/8”to1”CTS 50280 4-3/8”X5-1/8” 1”to2”CTS/IPS 50

•IdealforsecuringCopper,PEX,CPVC,andgastubingdirectlytostrut/channel•#257-P,#287-Pincludesound-rated/isolationpadstoreducenoise&vibration•Notoolsrequiredandeliminatesneedforover20strutclampSKUs•Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds•FireretardantframeworkmeetsrequirementsofUL94V-2rating

HOLDRITE STRUT CLAMP – #257, #287#257-P, #287-P

Model# Size For Pipe Size(s) Box Qty257 2-1/2”x2-7/8” 3/8”-1”CTS 50257-P 2-1/2”x2-7/8” 3/8”-1”CTS 50287 3-1/2”x4-7/8” 1”-2”CTS/IPS 50287-P 3-1/2”x4-7/8” 1”-2”CTS/IPS 50

•IdealforsecuringtubingtoEZ-Struttrapezeplatform•MeetsrequirementsofUL94V-0andASTME8425/50ratings•Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds

HOLDRITE CLAMPS – #250-S, #280-S

Model# Size For Pipe Size(s) Box Qty250-S 2-3/8”X2-5/8” 3/8”to1”CTS 50280-S 4-3/8”X5-1/8” 1”to2”CTS/IPS 50

NEW

•IdealforsecuringCopper,PEX,CPVC,andgastubingdirectlytostrut/channel•Notoolsrequiredandeliminatesneedforover20strutclampSKUs•Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds•Providesdissimilarmetalisolation•MeetsrequirementsofUL94V-0andASTME8425/50ratings

HOLDRITE STRUT CLAMP – #257-S, #287-S

Model# Size For Pipe Size(s) Box Qty257-S 2-1/2”x2-7/8” 3/8”-1”CTS 50287-S 3-1/2”x4-7/8” 1”-2”CTS/IPS 50

NEW

22 (800) 321-0316 • Fax: (760) 744-0507OVERHEAD SOLUTIONS

HOLDRITE – #121-D, #121-DS, #121-DLS•IdealfordualpiperunapplicationsincludingCopper,CPVC,andPEX•#121-Dprovides2”centerlineheightfromstructure•#121-DSprovides1-1/4”centerlineheightfromstructure•#121-DLSprovides3”centerlineheightfromstructure•Galvanizedsteelbracketattachesdirectlytoflatsurfaceorsuspends from3/8”all-threadrod,providinganydesiredheight•Bracketcanbecastintoconcreteslab,thenbentintoposition•CompatiblewithHOLDRITE#400and#261/#262inserts

Model# Size For Pipe Size(s) Box Qty121-D 5”X3”X1” 1/2”,3/4”,1”CTS 25121-DS 5”x2-1/4”x1-3/4” 1/2”,3/4”,1”CTS 25121-DLS 5”x4-1/2”x1” 1/2”,3/4”,1”CTS 25

#121-DS

#121-D

#121-DLS

•IdealforsinglepiperunapplicationsincludingCopper,CPVC,andPEX•#121-Rprovides1-1/4”centerlineheightfromstructure•#121-Wprovidesa2”centerlineheightfromstructure•#121-RLSprovides3”centerlineheightfromstructure•Galvanizedsteelbracketattachesdirectlytoflatsurfaceorsuspends from3/8”all-threadrod,providinganydesiredheight•Bracketcanbecastintoconcreteslab,thenbentintoposition•CompatiblewithHOLDRITE#400and#261/#262inserts

HOLDRITE – #121-R, #121-W, #121-RLS

Model# Size For Pipe Size(s) Box Qty121-R 2”X1-3/4”X1-1/2” 1/2”,3/4”,1”CTS 25121-W 3”X1-3/4”X3/4” 1/2”,3/4”,1”CTS 25121-RLS 4-1/2”x2-5/8”x1” 1/2”,3/4”,1”CTS 50

#121-R

#121-W

#121-RLS

HOLDRITE – #121-L•Idealfordualpiperunapplicationsincluding Copper,CPVC,andPEX•Provides2”and4”centerlineheightfromstructure•Galvanizedsteelbracketattachesdirectlytoflatsurfaceorsuspends from3/8”all-threadrod•Bracketcanbecastintoconcreteslab,thenbentintoposition•CompatiblewithHOLDRITE#400and#261/#262inserts

Model# Size For Pipe Size(s) Box Qty121-L 5” X 2-1/2” X 2” 1/2”,3/4”,1”CTS 25

23www.holdrite.com OVERHEAD SOLUTIONS

•Cast-in-placeconcretehangerbracketforhorizontalsupport•Galvanizedsteelbracketwith1-1/4”,2”,4”centerlineheightsfromstructure•MeetsMSS-SP-58loadrequirements•CompatiblewithHOLDRITE#400and#261/#262inserts

HOLDRITE HANGOVER – #125, #125-D

Model# Size For Pipe Size(s) Box Qty125 8-7/8”x2-1/2” 1/2”,3/4”,1”CTS 50125-D 9-5/8”x5” 1/2”,3/4”,1”CTS 50

•Idealforthreepiperunapplicationsincluding Copper,CPVC,andPEX•Provides1-1/4”,2-3/8”,3-1/2”centerlineheightfromstructure•Galvanizedsteelbracketattachesdirectlytoflatsurfaceor suspendsfrom3/8”all-threadrod,providinganydesiredheight•Bracketcanbecastintoconcreteslab,thenbentintoposition•CompatiblewithHOLDRITE#400and#261/#262inserts

HOLDRITE – #121-O

Model# Size For Pipe Size(s) Box Qty121-O 4-1/2” X 4” X 1-1/2” 1/2”,3/4”,1”CTS 25

Model#For Pipe Size(s)

Box QtyIPS Size CTS Size

320 n/a 1/2” 50321 1/2” 3/4” 50322 3/4” 1” 50323 1” 1-1/4” 50324 1-1/4” 1-1/2” 50325 1-1/2” 2” 50326 2” 2-1/2” 50327 2-1/2” 3” 25328 3” n/a 25330 4” 4” 25

•Idealfordissimilarmetalisolationandnoise&vibrationisolation•GalvanizedsteelJ-hangerwithrubberliner•ConformswithManufacturersStandardizationSociety(MSS)SP-58and SP-69(Type5)

HOLDRITE J-HANGERS – #320 - #330

NEW

NEW

•Idealfordissimilarmetalisolationandnoise&vibrationisolation•Galvanizedsteelloophangerwith3/8”swivelnutandrubberliner•ConformswithFederalSpecificationWW-H-171(Type10),Manufacturers StandardizationSociety(MSS)SP-58andSP-69(Type10)

HOLDRITE SWIVEL LOOP HANGERS – #300 - #310



300 n/a 1/2” 100301 1/2” 3/4” 100302 3/4” 1” 100303 1” 1-1/4” 100304 1-1/4” - 1-1/2” 1-1/2” 100306 2” 2” 100307 2-1/2” 2-1/2” 50308 3” 3” 50310 4” 4” 25

#125

#125-D

24 TELESCOPING SOLUTIONS

• Superior Strength and Telescoping Design• Supports Copper, PEX, CPVC and Others• Numerous Components Integrate Directly into Multiple Sides of Brackets• Ideal for Vertical or Horizontal Installations

HOLDRITE®


Support and Alignment SolutionsTELESCOPING

(800) 321-0316 •Fax: (760) 744-0507

25www.holdrite.com TELESCOPING SOLUTIONS

HOLDRITE STOUT BRACKET® andHOLDRITE® EZ-STRUT™Load Ratings on page 43

•Multi-purposegalvanizedsteelbracketsupportsvarious applicationsolutions•Idealforlavatory,shower,watercloset,vertical,horizontaland muchmore•TelescopingdesignsupportsCopper,PEX,CPVC,andmanyother typesofpiping•Numerousclampsandfittingsintegrateontomultiplesidesofthe StoutBracketforsuperiorstrengthandversatility•SB1SandSB2Sincludesfourscrews

HOLDRITE STOUT BRACKET® – #SB1, #SB2 #SB1S, #SB2S

Model# Size For Pipe Size(s) Box QtySB1 10”to18” Various 50SB1S 10”to18” Various 50SB2 13”to25” Various 50SB2S 13”to25” Various 50

HOLDRITE VARIABLE CLAMPS – #250, #280

Model# Size For Pipe Size(s) Box Qty250 2-3/8”X2-5/8” 3/8”to1”CTS 50280 4-3/8”X5-1/8” 1”to2”CTS/IPS 50

•Idealfornoiseandvibrationisolationanddissimilarmetalisolation•CompatiblewithCopper,PEX,CPVC,CSST,PVC,Steel,&othermaterials•VariableclosureclampmountsdirectlytoStoutBracket&EZ-StrutBracket•Supportsupto2”pipesizeswithsoundrating

Model# Size For Pipe Size(s) Box QtyEZ-1 12”to21” Various 25EZ-2 23”to40” Various 25

•Galvanizedsteeltrapezeplatformwithtelescopingdesign•Idealformultiplepiperunapplicationincludinggas,Copper,CPVC,PEX•Sizingfrom12”to40”withloadratingofupto1000pounds•CompatiblewithHOLDRITE#250&#280clamps&otherindustryclamps•Attachestostandardall-threadrod•Includesfourscrews

HOLDRITE EZ-STRUT™ – #EZ-1, #EZ-2

•Idealforshowerhead,tubspout,verticalmid-span,andmuchmore•Supportsboth2-earedand3-eared90s •TelescopingdesignsupportsCPVC,Copper,andPEXtubing•IntegrateswithseveralHOLDRITEclampsandotherindustrystandard components

HOLDRITE STOUT BRACKET® – #SB3, #SB4

Model# Bracket Size For Pipe Size(s) Box QtySB3 10-1/4”to17-1/2” Various 50SB4 15-1/4”to25-1/2” Various 50

NEW

26 (800) 321-0316 • Fax: (760) 744-0507TELESCOPING SOLUTIONS

Model# Size For Pipe Size(s) Box Qty201 2-1/8”X1-7/8” 1/2” CTS 50202 2-1/8”X2-1/8” 3/4”CTS 50

•IdealforsecuringsingleCopper,PEX,CPVCtubingtoStoutBracket•Nylonclampsattachwithasinglefastener•FlameratedperUL94V-2standards

HOLDRITE PRO CLAMP – #201, #202

•IdealforRemodel&RepairornewconstructionforSink/Toiletapplications•TelescopingbracketandvariableclosureclampssupportCopper,PEX, andCPVC•Reducesnoiseandvibrationisolationanddissimilarmetalisolation•Installationphotosonpackaging•IdealforCounterSales•Includes(1)StoutBracket,(2)clamps,and(4)screws

HOLDRITE REMODEL & REPAIR KIT – #HR-RR-1

Model# Size For Pipe Size(s)

KitQty

6 PAK Qty

Case Qty

HR-RR-1 10”to18” 1/2”to1”CTS 1 6 36

•IdealforRemodel&RepairornewconstructionforTub/Showerapplications•TelescopingbracketandvariableclosureclampssupportCopper,PEX, andCPVC•Reducesnoiseandvibrationisolationanddissimilarmetalisolation•Installationphotosonpackaging•IdealforCounterSales•Includes(3)StoutBrackets,(4)clamps,and(12)screws

HOLDRITE REMODEL & REPAIR KIT – #HR-RR-2

Model# Size For Pipe Size(s)

KitQty

6 PAK Qty

Case Qty

HR-RR-2 10”to18” 1/2”to1”CTS 1 6 36

HOLDRITE STOUT BRACKET – #SB1-2502, #SB2-2502•Multi-purposegalvanizedsteelbracket,(2)twoHOLDRITE®

#250clamps,4screws•Idealforlavatory,shower,watercloset,vertical,horizontalandmuchmore•TelescopingdesignsupportsCopper,PEX,CPVC,andmanyother typesofpiping•NumerousclampsandfittingsintegrateintomultiplesidesoftheStout Bracketforsuperiorstrengthandversatility

Model# Size For Pipe Size(s) Box QtySB1-2502 10”to18” 1/2”-1” CTS 25SB2-2502 13”to25” 1/2”-1” CTS 25

NEW

NEW

27ACOUSTICAL SOLUTIONS

Noise and Vibration Isolation Solutions

ACOUSTICAL

ACOUSTICALAPPLICATIONSOLUTIONS

HOLDRITE®

SILENCER™


• Integrates with HOLDRITE® Pipe Support Systems • Reduces Plumbing Noise and Vibration• Compatible with Copper, PEX, CPVC, Cast Iron, and Other Materials• ISO-3822 Certified Lab Tested• Field Tested and Proven

ReducesPlumbing Noiseby 87% on Average

www.holdrite.com

28 (800) 321-0316 • Fax: (760) 744-0507ACOUSTICAL SOLUTIONS

•Idealforsound-ratedandisolationapplications,labtested•CompatiblewithCopper,PEX,CPVC,ironpipeandothersystemmaterials•VariableclosureclampmountsdirectlytoStoutBracketandEZ-StrutBracket•Supportsupto2”pipesizes,withloadratingsupto300lbs.

HOLDRITE SILENCER – #250, #280

Model# Clamp Size For Pipe Size(s) Box Qty250 2-3/8”X2-5/8” 3/8”-1”CTS 50280 4-3/8”X5-1/8” 1”-2”CTS/IPS 50

HOLDRITE STOUT BRACKET® – #SB1S, #SB2S

Model# Bracket Size For Pipe Size(s) Box QtySB1S 10”to18” Various 50SB2S 13”to25” Various 50

•Multi-purposegalvanizedbracketsupportsvariousapplicationsolutions•Idealforlavatory,shower,watercloset,vertical,horizontalandmuchmore•TelescopingdesignsupportsCopper,PEX,CPVC,andothertypesofpiping•Numerousacoustically-ratedcomponentsintegrateintomultiplesidesof theStoutBracketforsuperiorstrengthandversatility•Includesfourscrews

•Showerhead/tubspoutacousticalanchorpointclamp,labtested•Idealforminimizingnoisetransfertothebuildingsystem•MountsdirectlytotheHOLDRITEStoutBracket(SB1+SB2)•Twoscrewsincluded

Model# Clamp Size Box Qty265 2-1/4”X1-5/8”X1-1/8” 50

HOLDRITE SILENCER – #265

Model# Bracket Size Tube / Pipe Size Box QtyHSS 13”to25” 1/2” CTS 10

•Idealfornoise&vibrationisolationatShowerHeadandDiverter•ComponentsareISO-3822certifiedlabtested•Includes(2)#SB2S,(2)#261,and(1)#265

HOLDRITE SILENCER – #HSSNEW

Model# Bracket Size Tube / Pipe Size Box QtyHSTS 13”X25” 1/2” CTS 10

•IdealfornoiseandvibrationisolationatShowerHeadandTub/ShowerDiverter•ComponentsareISO-3822certifiedlabtested•Includes(3)#SB2S,(3)#261,and(2)#265

HOLDRITE SILENCER – #HSTSNEW

29www.holdrite.com

Model# Clamp Size For Pipe Size(s) Box Qty255 2-7/8”X2” 3/8”-1”CTS 50285 4-3/8”X4” 1”-2”CTS/IPS 50

•Idealforsound-ratedandisolationapplications,labtested•CompatiblewithCopper,PEX,CPVC,ironpipeandothersystemmaterials•Flatbase,variableclosureclampmountsdirectlyto#SB3&#SB4,wood, metal,orothersurfaces•Supportsupto2”pipesizes,withloadratingsupto300lbs.

HOLDRITE SILENCER – #255, #285

HOLDRITE VARIABLE STRUT CLAMP – #257-P, #287-P•IdealforsecuringCopper,PEX,CPVC,andgastubingdirectlytostrut/channel•Notoolsrequiredandeliminatesneedforover20strutclampSKUs•Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds•Includesisolationpadstominimizenoiseandvibration,labtested•Providesdissimilarmetalisolation

Model# Size For Pipe Size(s) Box Qty257-P 2-1/2”x2-7/8” 3/8”-1”CTS 50287-P 3-1/2”x4-7/8” 1”-2”CTS/IPS 50

Model# Hole Needed For Pipe Size(s) Box Qty261 1-3/8”Diameter 1/2” CTS 50262 1-3/8”Diameter 3/4”CTS 50263 2”Diameter 1” CTS 50264 2”Diameter 1-1/4” CTS 50

•Idealforsound-ratedandisolationapplications,labtested•CompatiblewithCopper,PEX,andCPVCtubing•Thru-studinsert/suspensionclamp,dualpurposedesign•IntegratesdirectlywithStoutBracketorEZ-StrutBracket•Supportsupto1-1/4”tubing

HOLDRITE SILENCER – #261 - #264

ACOUSTICAL SOLUTIONS

Model# Size Hanger Size Box Qty270 3/4”Wide Various 50’Roll

•Lab-testedrubberisolationliner•Idealforsound-ratedandisolationapplicationsforCopper,PEX,CPVC, PVC,Ironpipe,ABS,andCastIron•AttachestoloophangersandHOLDRITEStoutBracket


Model# Size Hanger Size Box Qty271 2”Wide Various 25’Roll

•Lab-tested,self-adhesiverubberisolationliner•Idealforsound-ratedandisolationapplicationsforCopper,PEX,CPVC, PVC,Ironpipe,ABS,andCastIron•Attachestoclevishangersorasapipewrap


30 (800) 321-0316 • Fax: (760) 744-0507ACOUSTICAL SOLUTIONS

Model# Size Tube / Pipe Size Box Qty272-2 2” X 1/4” X 25’ Various 25’RollFelt100 2-1/4”X1/8”X100’ Various 100’Roll

•Lab-tested,self-adhesivewhitefelt•Idealforsound-ratedandisolationapplicationsforCopper,PEX,CPVC, PVC,Ironpipe,ABS,andCastIron•Eliminatesdissimilarmetalcontactandminimizesnoise/vibrationtransfer•#272-2is1/4”thick

HOLDRITE SILENCER – #272-2, #Felt 100

Model# Size Pipe Size Box Qty274 2”X2”X3/4” Various 180275 2”X2”X7/8” Various 144

275-T 2”X2”X7/8” Various 144276 2” X 2” X 1/4” Various 50278 2” X 2” X 1/4” Various 50

•#274,#275,#275-Thavelab-tested,Neoprenewhitevibrationisolationpad•Rubbervibrationisolationpadidealforriserclampsorequipmentsupport•Minimizesnoiseandvibrationtransferatpipingstacksandrisers•#275,#275-T,&#278includesadditional10-gage,galvanizedsteelbearingplate•#275-Tincludesverticaltabsforkeepingriserclampinplace

HOLDRITE SILENCER – #274, #275, #275-T, #276, #278

#276

#278

#275

#274

#275-T

REV 3

HOLDRITE�

SILENCERTM

#275-T

PATENT PENDING

R

NEW

HOLDRITE J-HANGERS – #320 - #330•Idealfornoise&vibrationisolationanddissimilarmetalisolation•GalvanizedsteelJ-hangerwithrubberliner•ConformswithManufacturersStandardizationSociety(MSS)SP-58andSP-69(Type5)



320 n/a 1/2” 50321 1/2” 3/4” 50322 3/4” 1” 50323 1” 1-1/4” 50324 1-1/4” 1-1/2” 50325 1-1/2” 2” 50326 2” 2-1/2” 50327 2-1/2” 3” 25328 3” n/a 25330 4” 4” 25

NEW

HOLDRITE SWIVEL LOOP HANGERS – #300 - #310•Idealfornoise&vibrationisolationanddissimilarmetalisolation•Galvanizedsteelloophangerwith3/8”swivelnutandrubberliner•ConformswithFederalSpecificationWW-H-171(Type10),Manufacturers StandardizationSociety(MSS)SP-58andSP-69(Type10)



300 n/a 1/2” 100301 1/2” 3/4” 100302 3/4” 1” 100303 1” 1-1/4” 100304 1-1/4” - 1-1/2” 1-1/2” 100306 2” 2” 100307 2-1/2” 2-1/2” 50308 3” 3” 50310 4” 4” 25

31ISOLATORS &

CLAMPS SOLUTIONS

Support and Alignment SolutionsISOLATORS & CLAMPS

HOLDRITE®


Standard Polyethylene

Standard PolypropyleneFlame Rated: Meets UL 94 V-2Smoke and Flame Rated: Meets UL 94 V-0 & ASTM E84 25/50

Standard Polypropylene

Rating DescriptionColor

www.holdrite.com

32 (800) 321-0316 • Fax: (760) 744-0507ISOLATORS & CLAMPS SOLUTIONS

Isolators and Clamps

Model# Clamp Size For Pipe Size(s) Box Qty221 1-7/8” X 1-1/2” 1/2” CTS 100222 1-7/8” X 1-3/4” 3/4” CTS 100223 2-3/8” X 2-1/8” 1” CTS 50224 2-7/8” X 2-3/8” 1-1/4” CTS 25225 2-7/8” X 2-3/4” 1-1/2” CTS 25226 3-3/8” X 3-1/8” 2” CTS 25

•IdealforCopper,PEX,andCPVCtubing•MountsdirectlyonHOLDRITESTOUTBRACKETorothersurfaces•Tubingsizeupto2”

HOLDRITE SUSPENSION CLAMPS – #221 - #226

•IdealforCopper,PEX,andCPVCtubing•MountsdirectlyonHOLDRITESTOUTBRACKETorothersurfaces

HOLDRITE STANDARD CLAMPS – #231 - #236

Model# Clamp Size For Pipe Size(s) Box Qty231 2” X 7/8” 1/2” CTS 100232 2-3/8” X 2-1/8” 3/4” CTS 100233 2-3/4” X 2-1/2” 1” CTS 50234 2-3/4” X 1-3/4” 1-1/4” CTS 25235 3-1/8” X 2” 1-1/2” CTS 25236 3-1/2” X 2-1/2” 2” CTS 25

Model# Hole Needed For Pipe Size(s) Box Qty104 1-3/8”Diameter 1/2” CTS 100105 1-3/8”Diameter 3/4” CTS 100106 1-3/8”Diameter 1” CTS 100

•IdealforCopper,PEX,andCPVCtubinginstub-outlocationswith#103 series,#121series,and#110-Rbrackets•Compatiblewith#121seriesbracketsforotherapplications•Tubingsizeupto1”


HOLDRITE THRU-STUD ISOLATORS – #161 - #163 •Idealforthru-studapplicationsinwoodormetalframing (1-3/8” or 1-11/32” holes)•IdealforisolationofCopper,PEX,andCPVCtubing•Tubingsizeupto1”

Model# For Pipe Size(s) Bag Qty Master Carton Qty161 1/2” CTS 50 500

162 3/4” CTS 50 500

163 1” CTS 25 250

•IdealforclampinstallationforCopper,PEX,andCPVCtubing•Pre-installednailforquickinstallation•Tubingsizeupto1”

HOLDRITE SINGLE-NAIL CLAMPS – #181 - #183

Model# For Pipe Size(s) Bag Qty Master Carton Qty181 1/2” CTS 100 1000

182 3/4” CTS 50 500

183 1” CTS 25 250

33www.holdrite.comISOLATORS &

CLAMPS SOLUTIONS

Flame-Rated Isolators

•IdealformetalstudswithCopper,PEX,andCPVCtubing•MeetsUL94V-2requirements•Compatiblewith#103,#121,#125,and#110-Rseriesbrackets•Tubingsizeupto1”(1-3/8”or1-11/32”holes)

HOLDRITE ISOLATORS – #404-R - #406-R

Model# Hole Needed For Pipe Size(s) Box Qty404-R 1-3/8”Diameter 1/2” CTS 100405-R 1-3/8”Diameter 3/4” CTS 100406-R 1-3/8”Diameter 1” CTS 100

•Idealformetalthru-studapplicationsandintegrateswithHOLDRITE#121 and#125seriesbrackets•PositioninganddissimilarmetalisolationforCopper,CPVC,andPEXtubing•MeetsUL94V-2requirements

HOLDRITE ISOLATORS – #424-RB - #426-RB, #424-RR - #426-RR

#424-RB

#424-RR

NEW


MasterCarton Qty

424-RB 1-11/32” & 1-3/8” 1/2” CTS 50 250425-RB 1-11/32” & 1-3/8” 3/4” CTS 50 250426-RB 1-11/32” & 1-3/8” 1” CTS 50 250

424-RR 1-11/32” & 1-3/8” 1/2” CTS 50 250425-RR 1-11/32” & 1-3/8” 3/4” CTS 50 250426-RR 1-11/32” & 1-3/8” 1” CTS 50 250

– Cold lines

– Hot lines

•Idealformetalthru-studapplicationsandintegrateswithHOLDRITE#121 and#125seriesbrackets•PositioninganddissimilarmetalisolationforCopper,CPVC,andPEXtubing•MeetsUL94HBrequirements•#424-C-#426-CareABSandglueablewithCPVCtubing



MasterCarton Qty

424 1-11/32” & 1-3/8” 1/2” CTS 50 250425 1-11/32” & 1-3/8” 3/4” CTS 50 250426 1-11/32” & 1-3/8” 1” CTS 50 250

424-C 1-11/32” & 1-3/8” 1/2” CTS 50 250425-C 1-11/32” & 1-3/8” 3/4” CTS 50 250426-C 1-11/32” & 1-3/8” 1” CTS 50 250

NEW

Model# Clamp Size For Pipe Size(s) Bag Qty#251 2-3/8” x 2-3/4” 1/2”,3/4”,1”CTS 50

•Mountsdirectlyto#170Bracket•Notoolsrequiredtoinstallclamp •Variableclosureclampsupportsupto1”CTS

HOLDRITE RAPID – #251

34 (800) 321-0316 • Fax: (760) 744-0507

Smoke & Flame-Rated Isolators & ClampsMeets ASTM E84 25/50 and UL 94 V-0 requirements

ISOLATORS & CLAMPS SOLUTIONS

•IdealforCPVC,Copper,andPEXtubing•MeetsASTME8425/50andUL94V-0requirements(Plenum-rated)

HOLDRITE STANDARD CLAMPS – #231-S - #232-S

Model# Clamp Size For Pipe Size(s) Bag Qty231-S 2” X 7/8” 1/2” CTS 100232-S 2-3/8” X 2-1/8” 3/4” CTS 100

Model# Clamp Size For Pipe Size(s) Bag Qty221-S 1-7/8” X 1-1/2” 1/2” CTS 100222-S 1-7/8” X 1-3/4” 3/4” CTS 100

•IdealforCPVC,Copper,andPEXtubing•MeetsASTME8425/50andUL94V-0requirements(Plenum-rated)

HOLDRITE SUSPENSION CLAMPS – #221-S - #222-S

Model# Clamp Size For Pipe Size(s) Box Qty255-S 2-7/8” X 2” 3/8” - 1” CTS 50285-S 4-3/8” X 4” 1”-2”CTS/IPS 50

•CompatiblewithCopper,PEX,CPVC,ironpipeandothersystemmaterials•Flatbase,mountsdirectlytowood,metal,orothersurfaces•MeetsASTME8425/50andUL94V-0requirements(Plenum-rated)•Variableclosureclampsupportsupto2”pipesizes,withloadratingsupto300lbs.


•Idealformetalthru-studapplications •IntegrateswithHOLDRITE#121and#125seriesbrackets•PositioninganddissimilarmetalisolationforCopper,CPVC,andPEXtubing•MeetsASTME8425/50andUL94V-0requirements(Plenum-rated)

HOLDRITE ISOLATORS – #424-S - #426-S


MasterCarton Qty

424-S 1-11/32” & 1-3/8” 1/2” CTS 25 250425-S 1-11/32” & 1-3/8” 3/4” CTS 25 250426-S 1-11/32” & 1-3/8” 1” CTS 25 250

NEW

•IdealforsecuringtubingtoEZ-Struttrapeze/Stoutplatform•MeetsASTME8425/50andUL94V-0requirements(Plenum-rated) •Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds


Model# Size For Pipe Size(s) Box Qty250-S 2-3/8” X 2-5/8” 3/8” to 1” CTS 50280-S 4-3/8” X 5-1/8” 1”to2”CTS/IPS 50

NEW

•IdealforsecuringCopper,PEX,CPVC,andgastubingdirectlytostrut/channel•Notoolsrequiredandeliminatesneedforover20strutclampSKUs•Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds•MeetsASTME8425/50andUL94V-0requirements(Plenum-rated)

HOLDRITE STRUT CLAMPS – #257-S, 287-S

Model# Size For Pipe Size(s) Box Qty257-S 2-1/2” x 2-7/8” 3/8” - 1” CTS 50287-S 3-1/2” x 4-7/8” 1”-2”CTS/IPS 50

NEW

www.holdrite.comwww.holdrite.com 35WATER HEATER

SOLUTIONS

™

IA PMOES

NFPA-5000

Support SolutionsWATER HEATER & EQUIPMENT

QUICK STRAP®

QUICK BELT™QUICK STAND™

36 (800) 321-0316 • Fax: (760) 744-0507

•CEILINGMOUNT•Cross Braces for seismic requirements•1” PVC drain fitting (MIP/Socket)•#40-SWHPsupportsupto20gallonsor375lbs.•#50-SWHPsupportsupto50gallonsor600lbs.

QUICK STAND – #40-SWHP, #50-SWHP

Model# Drain Pan Size Box Qty Pallet Qty40-SWHP 21-1/4” x 21-1/4” 1 1050-SWHP 26-1/2” x 26-1/2” 1 10

•WALLMOUNT•1” Metal drain fitting•#40-SWHP-WMsupportsupto20gallonsor375lbs.•#50-SWHP-WMsupportsupto50gallonsor600lbs.

Model# Drain PanSize Box Qty Pallet Qty40-SWHP-WM 21-1/4” x 21-1/4” 1 1050-SWHP-WM 26-1/2” x 26-1/2” 1 10

QUICK STAND – #40-SWHP-WM, #50-SWHP-WM

•CEILINGMOUNT•No Cross Braces•1” PVC drain fitting (MIP/Socket)•#40-SWHP-Asupportsupto20gallonsor375lbs.•#50-SWHP-Asupportupto50gallonsor600lbs.

QUICK STAND – #40-SWHP-A, #50-SWHP-A

Model# Drain Pan Size Box Qty Pallet Qty40-SWHP-A 21-1/4” x 21-1/4” 1 1050-SWHP-A 26-1/2” x 26-1/2” 1 10

•CEILINGMOUNT•No Cross Braces•1” Metal drain fitting•#40-SWHP-Msupportsupto20gallonsor375lbs.•#50-SWHP-Msupportupto50gallonsor600lbs.

Model# Drain Pan Size Box Qty Pallet Qty40-SWHP-M 21-1/4” x 21-1/4” 1 1050-SWHP-M 26-1/2” x 26-1/2” 1 10

QUICK STAND – #40-SWHP-M, #50-SWHP-M

•WALLMOUNT•1” PVC drain fitting (MIP/Socket)•#40-SWHP-Wsupportsupto20gallonsor375lbs.•#50-SWHP-Wsupportupto50gallonsor600lbs.

Model# Drain Pan Size Box Qty Pallet Qty40-SWHP-W 21-1/4” x 21-1/4” 1 1050-SWHP-W 26-1/2” x 26-1/2” 1 10

QUICK STAND – #40-SWHP-W, #50-SWHP-W

NEW

NEW

NEW

NEW

37www.holdrite.com

•Themosttestedandrecognizedwaterheaterrestraint•Galvanizedwaterheaterstrapinbox•Supportsupto80gallonwaterheaters

QUICK STRAP® – #QS-50, #QS-50-P

Model# Size Qty Pallet QtyQS-50 Upto80gal. 15/Box 120

QS-50-P Upto80gal. 15/Bag 180

QUICK STRAP® – #QS-120 •Themosttestedandrecognizedwaterheaterrestraint•Galvanizedwaterheaterstrapinbox•Supportsupto120gallonwaterheaters

Model# Size Box Qty Pallet QtyQS-120 Upto120gal. 12 60

•Themosttestedandrecognizedwaterheaterrestraint•Soft-beltstylewaterheaterstrap•#QB-50-Fsupportsupto80gallonwaterheaters

QUICK BELT® – #QB-50-F

Model# Size Box Qty Pallet QtyQB-50-F Upto80gal. 20 120

•Waterheaterstand,bothassembledandunassembled•Galvanizedsteelconstruction•“-U”modelsareunassembled,“-A”modelsarepre-assembled

QUICK STAND – #40-S-22-U, #40-S-22-A, #40-S-24-U, #40-S-24-A

Model# Size Box Qty Pallet Qty40-S-22-U Upto52gal./650lbs. 1 2440-S-22-A Upto52gal./650lbs. 1 2440-S-24-U Upto100gal./1,200lbs. 1 1840-S-24-A Upto100gal./1,200lbs. 1 18

QUICK STRAP® DELUXE – #QS-50-D •Themosttestedandrecognizedwaterheaterrestraint•Powder-coatedsteelwaterheaterstrapwith(2)safetycaps•Supportsupto80gallonwaterheaters•Customizedlabelavailablewithyourcompanyname

Model# Size Box Qty Pallet QtyQS-50-D Upto80gal. 15 120

Model# Size Kit Qty 6 Pak Qty Case QtyQS-50-D6 Upto80gal. 1 6 24

(800) 321-0316 • Fax: (760) 744-050738

PEXQuickSearchbyApplication

IN-SLAB / GROUND WORKRADIANT HEATING

SINK / LAVATORY

103-18 704 704110-R

WATER CLOSETTUB / SHOWER

704

SB1S

103-18 704709-L 701250 SB1S 709-EXT 704

101-18-R

PEX QUICK SEARCH

707707706 708-E708

VERTICAL

181221231

SB1S

OVERHEAD

704 705 424-RB424-RR

121-DS

DRINKING FOUNTAIN

709 704103-26 704

THRU-STUD

161 424

705103-18 701

www.holdrite.com 39

CPVCQuickSearchbyApplication

THRU-STUD / JOIST

OVERHEAD


SINK / LAVATORY

601-20 604 601-26 604 SB1S 211 SB1S 250

SB1S 211

SB1S 211 424-C709-L 709-EXT701

VERTICAL

SB3 255 601-20 604

SB3

DRINKING FOUNTAIN WATER HEATER

161

424-RR 221

604609-N-6

424-RB

121-DS

181

125-D 404-R

424

CPVC QUICK SEARCH

SB1S 211 601-26 604 601-20 605 SB1S 212

103-18 701

(800) 321-0316 • Fax: (760) 744-050740

SINK / LAVATORY

SB1S 250

COPPER RESIDENTIAL/COMMERCIAL QUICK SEARCH

COPPER RESIDENTIAL/COMMERCIALQuickSearchbyApplication

101-18 107-18 140 150-20

SINK / LAVATORY

TUB / SHOWER

SB3 SB3 255SB1SSB2S 250

101-26-R 107-26

URINAL

102-26

WATER CLOSET

109-A-9109-N-6 101-18

WATER HEATERS

102-18 SB2S 250

VERTICAL

SB2S 250 SB3 255 150-26

THRU-STUD

161 424

MOP SINK

SB2S

DRINKING FOUNTAIN

111-S 107-26

www.holdrite.com 41

SINK / LAVATORY

118-T-6110-S-1/2

VERTICAL

118-T-8 111-S 121 104

VERTICAL / HORIZONTAL RESTRAINT

117-4D

HORIZONTAL

115-C V-2115

OVERHEAD

WATER CLOSET / CARRIER

114-C114-CO 114-C-EXT114-CR

PRE-FAB & SPECIALITY BRACKETSQuickSearchbyApplication

280

EZ-1

250 280-S

EZ-1

250-S

PRE-FAB/SPECIALTY QUICK SEARCH

117-4

(800) 321-0316 • Fax: (760) 744-050742OVERHEAD QUICK SEARCH

QuickSearchbyApplication

HIGH & TIGHT RUNS

121-R 121-DS

PLENUM

121-W 425-S 121-DS 424-S

MULTIPLE RUN

424-RR

121-DS

121-L 121-O 280

EZ-1

250

257 287 SB1S 211

MULTIPLE RUN

LOW and GO RUNS

121-DLS 121-W 121-L 404-R 404-R 404-R

404-R 404-R 424-RB

404-R 425-RB

CAST-IN-PLACE

125-D125 404-R 404-R

FUELGASES

EZ-1

250

MEDICAL GASES

EZ-1 250257 287 280

250-S

EZ-1

280-S257-S 287-S

www.holdrite.com 43TELESCOPING

QUICK SEARCH

SINK / LAVATORY

TELESCOPINGQuickSearchbyApplication

TUB / SHOWER

Basedonsinglebeamcondition

VERTICAL / HORIZONTAL

SB3 SB2S 250SB1S 250 255

232 221

SB1S

SB1S 250 SB3 231

WATERCLOSET

SB1S 250 280

EZ-1

250

MEDICAL GASES PLENUMOVERHEAD

SB1S 211 211

FUEL GAS

EZ-1 250 280

EZ-1

250 280-S

EZ-1

250-S

HOLDRITE® EZ-STRUT™Beam Span Model# Uniform Load Center Pt. Load

12” EZ-1 1100 100018” EZ-1 510 50021” EZ-1 360 36023” EZ-2 600 40030” EZ-2 534 40036” EZ-2 175 16040” EZ-2 153 120

Basedonsinglebeamcondition

Beam Span Model# Center Pt. Load10” SB1 400

10-1/4” SB3 863

14-1/2”SB1 164SB3 480

16”SB3 322SB4 550

18”SB1 104SB2 158

22-1/2”SB2 124SB4 271

24”SB2 68SB4 228

HOLDRITE STOUT BRACKET®

TELESCOPING LOADING DATA (max load)

SB1SSB4

44 (800) 321-0316 • Fax: (760) 744-0507ACOUSTICAL QUICK SEARCH

ACOUSTICALQuickSearchbyApplication

OVERHEAD

HORIZONTAL / VERTICAL

THRU-STUD / JOIST


SINK / LAVATORY

SB1S 261

263

SB1S 261

RISER CLAMPS

274 275-T 276 278

272-2

265 261

SB3 255

261

SB1S 265

SB1S 250 261

271

709-EXT 261

250

103-18 261

SB1S 250

257-P 287-P

709-L 261

250 280

EZ-1

110-R

SB2S

J / LOOP / CLEVIS HANGERS

271321 308

45www.holdrite.com 45www.holdrite.com

(800) 321-0316 www.holdrite.com

Job Name Date P.O. #Estimate#

Contact PhoneMODEL # QTY DESCRIPTION BOX QTY CATALOG PAGE #100-18 20"flat,Copper-Bondedbracketpositions1/2"tubingwithuniquemfg.processanddesign 100 15101-18 20"flat,Copper-Bondedbracketpositions1/2"tubing 50 15,40101-18R 20"extrudedholes,Copper-Bondedbracketpositions1/2"tubing 25 9,15,38101-26 26"flat,Copper-Bondedbracketpositions1/2"tubing 50 15101-26R 26"extrudedholes,Copper-Bondedbracketpositions1/2"or3/4"tubing 25 9,15,40101-F 3"Copper-Bondedfloorplate,supportsone1/2"tube 50 16102-18 20"flat,Copper-Bondedbracketpositions3/4"or1"tubing 50 15,40102-26 26"flat,Copper-Bondedbracketpositions1/2",3/4"or1"tubing 50 15,40103-18 20"flat,galvanizedbracketwith1-3/8"keyedholes,positions1/2"-1"tubing 50 7,8,12,38,39,44103-26 26"flat,galvanizedbracketwith1-3/8"keyedholes,positions1/2"-1"tubing 50 7,8,12,38104 1/2"plasticinsertforusewith#103brackets 100 10,19,32,41105 3/4"plasticinsertforusewith#103brackets 100 10,32106 1"plasticinsertforusewith#103brackets 100 10,32107-18 20"flat,Copper-Bondedbracketpositions1/2",3/4"or1"tubing 50 15,40107-26 26"flat,Copper-Bondedbracketpositions1/2",3/4",1"or1-1/4"tubing 50 15,40108-20 20"extrudedholes,Copper-bondedbracketpositions1/2",3/4"or1"tubing 50 15108-26 26"extrudedholes,Copper-bondedbracketpositions1/2",3/4"or1"tubing 50 15109-A-9 "L"bracketwithsix1/2"extrudedholesat2-3/4",4-1/2",6",7",8"or9" 50 16,40109-N-6 Copper-bondedsteelbracketmadetoposition1/2"and3/4"coppertubing 50 16,40110-R Galvanizedsteelbracketforpipe-on-pipesupportfor1/2",3/4"or1"tubing 50 8,19,38,44110-S-1/2 Copper-bondedbracketwith1/2"notcheson1"centers 50 18,41111-S Copper-bondedbracketfor1/2"and3/4"tubing 50 18,41114-C Copper-bondedcarrierbracketsecures1"flushvalvestubout 6 19,41114-CEXT Providesadditionalheightof8-1/2"to25-1/2"forcarrierbrackets 6 19,41114-CO Copper-bondedoffsetcarrierbracketsecures1"flushvalvestubout 6 19,41114-CR Copper-bondedcarrierbracketwith1-1/8"notchatthetop 6 19,41115 Galvanizedsteelbracketsecures1/2"through2"pipe 25 18,41115-C Copper-bondedsteelbracketsecures1/2"through2"pipe 25 18,41117-3 5 18117-6 5 18117-8 5 18117-3D 5 18117-6D 5 18117-8D 5 18118-T6 50 18,41118-T8 50 18,41121 Galvanizedsteelbracketthatsupportsonecopper,PEXorCPVCtube 25 19,41121-D Galvanizedsteelbracketthatsupportstwolinesofcopper,PEXorCPVCtubing 25 22121-DLS Galvanizedsteelbracketthatsupportstwolinesofcopper,PEXorCPVCtubing 25 22,42121-DS Galvanizedsteelbracketthatsupportstwolinesofcopper,PEXorCPVCtubing 25 22,38,39,42121-L Galvanizedsteelbracketthatsupportstwolinesofcopper,PEXorCPVCtubing 25 22,42121-O Galvanizedsteelbracketthatsupportsthreelinesofcopper,PEXorCPVCtubing 25 23,42121-R Galvanizedsteelbracketthatsupportsonecopper,PEXorCPVCtube 25 22,42121-RLS Galvanizedsteelbracketthatsupportsonecopper,PEXorCPVCtube 50 22121-W Galvanizedsteelbracketthatsupportsonecopper,PEXorCPVCtube 25 22,42125 ConcreteInsertBracketwith121-Rand121-WCenterlines 50 23,42125-D ConcreteInsertBracketwith121-DCenterlines 50 23,42130 Singlesolidcopperclipfor1/2"tube 100 16131 Singlesolidcopperclipfor3/4"tube 100 16132 Singlesolidcopperclipfor1"tube 100 16140 20"Copper-bondedbracketwithextrudednotchesfor1/2"or3/4"tubing 50 16,40141 20"Copper-bonded90ºbracketwithextrudednotchesfor1/2"or3/4"tubing 50 16150-20 20"flat,Copper-bondedbracketpositions1/2"or3/4"tubing 50 16,40150-26 26"flat,Copper-bondedbracketpositions1/2"or3/4"tubing 50 16,40161 Plasticthru-studisolator(1/2"CTS) 50 32,38,39,40162 Plasticthru-studisolator(3/4"CTS) 50 32163 Plasticthru-studisolator(1"CTS) 25 32170 18"90ºgalvanizedsteelbracket 50 16170-251 18"galvanizedbracketsand#251variableclosureclamps(BULKPACKAGING) 25/50 13170-C 18"90ºCopper-bondedbracket 50 16170-S 18"90ºgalvanizedsteelbracketwithtwoscrews 50 16181 Plasticsinglenailclamp(1/2"CTS) 100 32,38,39182 Plasticsinglenailclamp(3/4"CTS) 50 32183 Plasticsinglenailclamp(1"CTS) 25 32201 Strongquick-closingplasticclampforsingle1/2"tube 50 26202 Strongquick-closingplasticclampforsingle3/4"tube 50 26

Steelbandw/stainlesssteelclamps.4"-6"IPS.Diagnolsupport-castironDWVpipingSteelbandw/stainlesssteelclamps.8"IPS.Diagnolsupport-castironDWVpiping

Steelbandwithstainlesssteelclamps.4"-6"IPS.IdealforcastironDWVpiping

Page 1 of 3

Copper-bondedpipeonpipesupportbracket-1/2"&3/4"(3/4"on6"centers)Copper-bondedpipeonpipesupportbracket-1/2"&3/4"(3/4"on8"centers)

Steelbandwithstainlesssteelclamps.8"IPS.IdealforcastironDWVpipingSteelbandw/stainlesssteelclamps.1-1/2"-3"IPS.Diagnolsupport-castironDWVpiping

Hubbard Enterprises/HOLDRITE Material "Take-off" Sheet and 2009 Catalog Page # Locator

Co. NameAddress

Steelbandwithstainlesssteelclamps.1-1/2"-3"IPS.IdealforcastironDWVpiping

VIP SOLUTIONS


Model# QTY DESCRIPTION BOX QTY CATALOG PAGE #211 Halfmoon,fireretardantPVCClampfor1/2"tube,UL94V0 100 13,39,42,43212 Halfmoon,fireretardantPVCClampfor3/4"tube,UL94V0 100 13,39221 1/2"Suspensiontubeclamp 100 13,33,38,39,43222 3/4"Suspensiontubeclamp 100 13,33221-S 1/2"Suspensiontubeclamp;meetsASTME-8425/50 100 34222-S 3/4"Suspensiontubeclamp;meetsASTME-8425/50 100 34223 1"Suspensiontubeclamp 50 13,33224 1-1/4"Suspensiontubeclamp 25 13,33225 1-1/2"Suspensiontubeclamp 25 13,33226 2"Suspensiontubeclamp 25 13,33231 1/2"Standardtubeclamp 100 13,33,38,43232 3/4"Standardtubeclamp 100 13,33,43231-S 1/2"Standardtubeclamp;meetsASTME-8425/50 100 34232-S 3/4"Standardtubeclamp;meetsASTME-8425/50 100 34233 1"Standardtubeclamp 50 13,33234 1-1/4"Standardtubeclamp 25 13,33235 1-1/2"Standardtubeclamp 25 13,33236 2"Standardtubeclamp 25 13,33250 Soundratedvariableclosureclamp.Supportsupto1"CTSsizes. 50 21,25,28,39,40,41,42,43,44250-S Variableclosureclamp-supportsupto1"CTSsizes;meetsASTME-8425/50 50 21,34,41,42,43251 Variableclosureclampsupportupto1"CTS.Mountsto#170bracketwithnotools/hardware 50 32255 Acousticalstandardclamp-supportsupto1"CTSsizes 50 29,39,40,43,44255-S Standardclamp-supportsupto1"CTSsizes;meetsASTME-8425/50 50 34257 Variablesizestrutclamp.Supportsupto1"CTS 50 21,42257-P Soundratedvariablesizestrutclamp.Supportsupto1"CTS 50 21,29,44257-S Variablesizestrutclamp.Supportsupto1"CTS.ASTME8425/50&UL94V-0rated 50 34,42261 1/2"Acousticalthrustudisolator/suspensionclamp 50 29,44262 3/4"Acousticalthrustudisolator/suspensionclamp 50 29263 1"Acousticalthrustudisolator/suspensionclamp 50 29,44264 1-1/4"Acousticalthrustudisolator/suspensionclamp 50 29265 Showerheadacousticanchor,mountsonHoldriteStoutBrackettominimizenoise&vibration 50 28,44270 3/4"Wideacousticalsoundinsulationlining 50'roll 30271 2"wideneopreneacousticalnoiseinsulationlinerwithadhesivebacking 25'roll 30,44272-2 2"X1/4"polyesterfelt.Acousticalnoiseinsulationw/adhesivebacking(12rollspercase) 25'roll 30,44274 2"X2"X3/4"acousticalriserclamppad(36pads/sheetand5sheets/box=180pads) 180 30,44275 2"X2"X3/4"acousticalriserclamppadw/10-gagegalvsteelbearingplate 144 30,44275-T 2"X2"X3/4"acousticalriserclamppadw/10-gagegalvsteelbearingplate&verticaltabs 144 30,44276 2"X2"X1/4"acousticalriserclamppad 50 30,44278 2"X2"X1/4"acousticalriserclamppadw/10gagegalvsteelbearingplate 50 30,44280 Soundratedvariableclosureclamp.Supportsupto2"CTS/IPSpipesizes 50 21,25,28,41,42,43,44280-S Variableclosureclamp.Supportspipeupto2"CTS/IPS.ASTME8425/50&UL94V-0rated 50 21,34,41,42,43285 Soundratedvariableclosureclamp.Supportsupto2"CTS/IPSpipesizes 50 29,285-S Variableclampmountstoflatsurface.1"to2"CTS/IPS.ASTME8425/50&UL94V-0rated 50 34287 Variablesizestrutclamp.Supportsupto1"-2"CTS/IPS.ASTME8425/50&UL94V-0rated 50 21,42287-S Variablesizestrutclamp.Supportsupto1"-2"CTS/IPS.ASTME8425/50&UL94V-0rated 50 21,34,42287-P Soundratedvariablesizestrutclamp.Supportsupto1"-2"CTS/IPSpipesizes 50 21,29,44300 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.1/2"CTS. 100 23,30301 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.1/2"IPS&3/4"CTS. 100 23,30302 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.3/4"IPS&1"CTS. 100 23,30303 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.1"IPS&1-1/4"CTS. 100 23,30304 100 23,30306 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.2"IPS&2"CTS. 100 23,30307 50 23,30308 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.3"IPS&3"CTS. 50 23,30,44310 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.4"IPS&4"CTS. 25 23,30320 GalvanizedsteelJ-hangerwithacousticalrubberliner.1/2"CTS. 50 23,30321 GalvanizedsteelJ-hangerwithacousticalrubberliner.1/2"IPS&3/4"CTS. 50 23,30,44322 GalvanizedsteelJ-hangerwithacousticalrubberliner.3/4"IPS&1"CTS. 50 23,30323 GalvanizedsteelJ-hangerwithacousticalrubberliner.1"IPS&1-1/4"CTS. 50 23,30324 GalvanizedsteelJ-hangerwithacousticalrubberliner.1-1/4"IPS&1-1/2"CTS. 50 23,30325 GalvanizedsteelJ-hangerwithacousticalrubberliner.1-1/2"IPS&2"CTS. 50 23,30326 GalvanizedsteelJ-hangerwithacousticalrubberliner.2"IPS&2-1/2"CTS. 50 23,30327 GalvanizedsteelJ-hangerwithacousticalrubberliner.2-1/2"IPS&3"CTS. 25 23,30328 GalvanizedsteelJ-hangerwithacousticalrubberliner.3"IPS. 25 23,30330 GalvanizedsteelJ-hangerwithacousticalrubberliner.4"IPS&4"CTS. 25 23,3040-S-22-A 22"Waterheaterstand,assembled,supportsupto52gallons/650lbs. 1 3740-S-22-U 22"Waterheaterstand,unassembled,supportsupto52gallons/650lbs. 1 3740-S-24-A 24"Waterheaterstand,assembled,supportsupto100gallons/1,200lbs. 1 3740-S-24-U 24"Waterheaterstand,unassembled,supportsupto100gallons/1,200lbs. 1 37

Hubbard Enterprises/HOLDRITE Material "Take-off" Sheet and 2009 Catalog Page # Locator (Cont.)

Page 2 of 3

Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.1-1/4"-1-1/2"IPS&1-1/2CTS.

Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.2-1/2"IPS&2-1/2"CTS.

46 (800) 321-0316 • Fax: (760) 744-0507

47www.holdrite.com


Model# QTY DESCRIPTION BOX QTY CATALOG PAGE #40-SWHP CeilingMount.CrossBraces.1"PVCfitting.SuspendedPlatform(21-1/4"diameter) 1 3640-SWHP-A CeilingMount.NoCrossBraces.1"PVCfitting.SuspendedPlatform(21-1/4"diameter) 1 3640-SWHP-M CeilingMount.NoCrossBraces.1"Metalfitting.SuspendedPlatform(21-1/4"diameter) 1 3640-SWHP-W WallMount.NoCrossBraces.1"PVCfitting.SuspendedPlatform(21-1/4"diameter) 1 3640-SWHP-WM WallMount.NoCrossBraces.1"Metalfitting.SuspendedPlatform(21-1/4"diameter) 1 3650-SWHP CeilingMount.CrossBraces.1"PVCfitting.SuspendedPlatform(26-1/2"diameter) 1 3650-SWHP-A CeilingMount.NoCrossBraces.1"PVCfitting.SuspendedPlatform(26-1/2"diameter) 1 3650-SWHP-M CeilingMount.NoCrossBraces.1"Metalfitting.SuspendedPlatform(26-1/2"diameter) 1 3650-SWHP-W WallMount.NoCrossBraces.1"PVCfitting.SuspendedPlatform(26-1/2"diameter) 1 3650-SWHP-WM WallMount.NoCrossBraces.1"Metalfitting.SuspendedPlatform(26-1/2"diameter) 1 36404-R 1/2"FireretardantinsertsthatcanbeusedasMetalStudisolators,UL94V2 100 10,33,42405-R 3/4"FireretardantinsertsthatcanbeusedasMetalStudisolators,UL94V2 100 10,33406-R 1"FireretardantinsertsthatcanbeusedasMetalStudisolators,UL94V2 100 10,33424 GREY1/2"Isolatorformetalthru-studand#121/#125seriesbrackets.UL94HBrated 50 10,13,32,38,39,40424-RB BLUE1/2"Fireretardantisolatorsformetalthru-stud,#121/#125brackets.UL94V-2rated 50 33,38,39,42424-RR RED1/2"Fireretardantisolatorsformetalthru-stud,#121/#125brackets.UL94V-2rated 50 33,38,39,42424-S 25 34,42425 GREY3/4"Isolatorformetalthru-studand#121/#125seriesbrackets.UL94HBrated 50 10,13,32425-RB BLUE3/4"Fireretardantisolatorsformetalthru-stud,#121/#125brackets.UL94V-2rated 50 33425-RR RED3/4"Fireretardantisolatorsformetalthru-stud,#121/#125brackets.UL94V-2rated 50 33425-S 25 34,42426 GREY1"Isolatorformetalthru-studand#121/#125seriesbrackets.UL94HBrated 50 10,13,32426-RB BLUE1"Fireretardantisolatorsformetalthru-stud,#121/#125brackets.UL94V-2rated 50 33426-RR RED1"Fireretardantisolatorsformetalthru-stud,#121/#125brackets.UL94V-2rated 50 33426-S 25 34601-20 20"Galvanizedsteelbrackettosupport1/2"&3/4"CPVCtubing 50 12,39601-26 26"Galvanizedsteelbrackettosupport1/2"&3/4"CPVCtubing 50 12,39604 1/2"Groovedinsert,CPVCcompatible,1"OD 100 12,39605 3/4"GroovedinsertCPVCcompatible,1"OD 100 12,39609-N-6 18-gagegalvanizedsteelbracketwith1"holeson2"centers 50 12,39701 1/2"CTSstuboutclampforPEXRITE®#103,#709,&d#110brackets.NoToolsRequired. 50 7,12,38,39701-0536P (1)#701and(1)1/2"CTS3-1/2"x6"CopperEll(preloaded) 25 8701-0538P (1)#701and(1)1/2"CTS3-1/2"x8"CopperEll(preloaded) 25 8701-PR PEX-to-CopperStub-outkit.(1)103-18,(2)701,(2)1/2"CTS3-1/2"x6"CopperEll 36 7704 Turnoutsupportforusewith1/2"or3/8"PEXtubing 100 7,38704-PR PEXStub-outkit.(1)103-18and(2)704turnouts.3/8"or1/2"CTSPEXtubing. 36 7705 Turn-outsupportforusewith1/2"or3/8"PEXtubing.Mountdirectlytoflatsurface. 50 9,38706 Pop-upsupportforusew/1/2"or3/8"PEXtubing.IdealforRadiantHeating. 50 9,38707 In-slab,flexibletubesupport.Holdsonetubeupto7/8"O.D. 25 9,38707-E SinglerunPOP-UPforflexible/rigidconduitorpipe.Tubesizesupto1"O.D. 25 9708 In-slab,flexibletubesupport.Holdsuptotwotubes,upto1-1/8"O.D. 15 10,38708-E Single/doublerunPOP-UPforflexible/rigidconduitorpipe.Tubesizes1/2"thru2"O.D. 15 10,38709 Galvanizedbracketwith1-3/8"keyedholes,7-1/5"longfor1/2",3/4",&1"tubing 50 8,38709-EXT Galvanized"L"bracketwith1-3/8"keyedholesat2”,4”,6”and8”for1/2",3/4",&1"tubing 50 8,38709-L Galvanized"L"bracketwith1-3/8"keyedholesfor1/2",3/4",&1"tubing 50 8,38721 Galvanizedbracket3.38"x2.75"withkeyedholefor1/2",3/4",&1"tubing 50 8EZ-1 EZ-Strut,Adjustablelengthtrapezefrom12"-21" 25 21,41,42,43,44EZ-2 EZ-Strut,Adjustablelengthtrapezefrom23"-40" 25 21Felt100 2-1/4"X1/8"polyesterfelt.Acousticalnoiseisolationliningwithadhesivebacking 100'roll 30HR-RR-1 Sink/Toiletstub-outsupportkit.(1)SB1Sbracketand(2)250clamps 36 26HR-RR-2 Tub/Showerstub-outsupportkit.(3)SB1Sbracketsand(4)250clamps 36 26HSS AcousticalShowerhead&diverterKit.Includes(2)SB1S,(2)261s,&(1)265. 10 28HSTS AcousticalShowerHead&Tub/ShowerDiverterKit.Includes(3)SB1S,(3)261s,&(2)265. 10 28QB-50-F Seatbeltsytlewaterheaterstraps,supportsupto80gallons 20 37QS-120 Galvanizedwaterheaterstraps,supportsupto120gallons 12 37QS-50 Galvanizedwaterheaterstraps,supportsupto80gallons 15 37QS-50-D Powdercoatedwaterheaterstrapsw/2safetycaps,supportsupto80gal 15 37QS-50-D6 WaterHeaterSupportkit.Powder-coatedwaterheaterstrapssupportsupto80gallons 24 37QS-50-P Galvanizedwaterheaterstraps(inabag),supportsupto80gallons 15 37SB1 TelescopingStoutbracket;10"to18"Span-noscrews 50 25SB1S TelescopingStoutbracket;10"to18"Span-fourscrews 50 9,13,25,28,38,39,40,42,43,44SB1-2502 OnetelescopingStoutBracket10"to18"-TwoStoutClamps-fourscrews 25 26SB2 TelescopingStoutbracket;13"to25"Span-noscrews 50 25SB2S TelescopingStoutbracket;13"to25"Span-fourscrews 50 9,13,25,28,40,43,44SB2-2502 OneStoutBracket13"to25"-TwoStoutClamps-fourscrews 25 26SB3 WidetelescopingStoutBracket;10-1/4"to17-1/2"Span-noscrews 50 12,25,39,40,43SB4 WidetelescopingStoutBracket;13-1/4"to25-1/2"Span-noscrews 50 12,25SC-200 Boxof200#8X1/2"selftapping,1/4"hexhead,Phillipsscrews 200 n/aV-2 Copper-Bondedsteelbracketdesignedtohold1/2"to3"pipeshorizontally 25 19,41

Page 3 of 3

Hubbard Enterprises/HOLDRITE Material "Take-off" Sheet and 2009 Catalog Page # Locator (Cont.)

YELLOW1/2"Smoke/Fireratedisolatorfor#121/#125brackets.ASTME8425/50&UL94V-0

YELLOW3/4"Smoke/Fireratedisolatorfor#121/#125brackets.ASTME8425/50&UL94V-0

YELLOW1"Smoke/Fireratedisolatorfor#121/#125brackets.ASTME8425/50&UL94V-0

48 (800) 321-0316 • Fax: (760) 744-0507

ADDITIONSANDCHANGES:Ordersnormallyshipwithin24hours.Wemakeeveryefforttocomplywithyourinstructions.Wewillacceptchangestoorders;however,additionalfreightchargesmaybeincurred.

PRODUCTRETURNS: Allreturnsmustcomplywiththeestablishedguidelinesbelow:

(a) AReturnGoodsAuthorizationnumberisrequired.AnyproductreceivedwithoutourRGAnumberwillberefused. THERGAISVALIDFOR30DAYSFROMISSUEDATE.Returnsnotreceivedwithin30dayswillberefused. (b) Returnsmustbeshippedfreightprepaidbacktodistributioncenter. (c) Allreturnedproductsmustbe(1)infullboxquantities,(2)ofcurrentdesignandmaterial,and(3)in saleablecondition. (d) AcreditmemowillbeissuedagainsttheDistributor’sNetPriceatthetimeofreturn,andwillonlybe issuedoncequantitieshavebeenverified.Creditmemosareonlyissuedforfullboxquantities. Brokenboxes,unsaleablematerial,specialsornon-catalogedproductswillnotbeconsideredforcredit. (e) A25%RESTOCKINGFEEWILLBECHARGEDFORALLRETURNS. (f) Allproductreturnsaresubjecttotheabovetermsandconditions.

ERRORS&SHORTAGES:Shippingerrors(e.g.wrongsizesorshortages)mustbereportedwithin15days.

DAMAGETOFREIGHT:Anyshipmentthatappearstobedamagedinshippingmustbenotedwhensigningforreceiptofdelivery.

LIABILITYOFMISUSE: HUBBARDENTERPRISESwillnotbeliablefordamagestopropertyorpersonsduetoimproperinstallationofmaterialorthroughattemptstoutilizethematerialunderconditionswhichexceedthedesignedcapabilities.Purchaseragreestoindemnifyandholdusharmlessforanyandallclaims,liabilities,damages,costs,andexpensesassertedagainstusorincurredbyusbecauseofinjuriestopersonordamagestopropertyresultingfromtheimproperinstallationormisuseofthematerial.

WestCoastDistributionCenter2560ProgressStreet

Vista,CA92081TollFree:(800)321.0316

Fax:(760)744.0507

TexasDistributionCenterDallas,Texas

TollFree:(800)321.0316Fax:(760)744.0507

EastCoastDistributionCenterNashville,Tennessee

TollFree:(800)321.0316Fax:(760)744.0507

1.

2.

3.

NASHVILLEWAREHOUSE

DALLASWAREHOUSE

NASHVILLEWAREHOUSE

DALLASWAREHOUSE

VISTAWAREHOUSE

VISTAWAREHOUSE

DISTRIBUTION &SHIPPING POLICY

TABLE OF CONTENTS...• Multi-purpose galvanized bracket supports various application solutions •...

Documents

Transcript of TABLE OF CONTENTS...• Multi-purpose galvanized bracket supports various application solutions •...