T1.9 IWM USER MANUAL - Orbit Fitness · GB Dear Customer, We are pleased, that you have chosen an...

T1.9 IWM USER MANUAL

GB

Dear Customer,

We are pleased, that you have chosen an Orbit Fitness Equipment. This quality product has been designed

for in‐home use and has been tested and certified according to the European Norm EN 957‐1/6. Please

carefully read the instructions prior to assembly and first use and be sure to keep the instructions for

reference and maintenance.

We wish you lots of success and fun while training,

GB

Customer Service

To best possible support you in the case of problems with your product, we would ask you to please quote

the product Model Name and Serial Number.

These can be found on the sticker underside your product.

Modelname:

Serialnumber:

Waste Disposal

Contact

If you have questions you cannot resolve with the help of this manual, or need to order replacement parts

Please call the outlet from where you purchased this machine.

Please have the product model name, number and serial number ready when you call.

Physique products are recyclable. At the end of its useful life please dispose of

this article correctly and safely (local refuse sites).

Batteries and accumulators do not belong in the domestic waste. Please,

dispose this article correctly (local refuse sites).

GB

Precautions

Before assembling or using the treadmill, please read the following instructions carefully. They contain

important information for use and maintenance of the equipment as well as for your personal safety.

Keep these instructions in a safe place for maintenance purposes or for ordering spare parts.

Product‐Scope: This product is made for home use only and tested up to a maximum body

weight of 115 kilograms.

Product‐Performance: This treadmill is tested to the European Standard EN 957‐1/6 HB. The

equipment is not suitable for therapeutic training.

Product‐Scope: Noise compliance: This treadmill meets the requirements of the noise pollution

standards.

Product‐Performance: The noise creation of treadmill is under 70db.

Product‐Maintenance: For keeping the run quality use the provided silicon spray every month or

after a working time of 115 kilometers between the belt and the running surface.

Product‐Maintenance: Search for noisy parts: If you should notice unusual noises, like grinding,

clacking etc. try to locate it and have it repaired by a professional. Make sure the treadmill is

not used until after repairs have been made.

Product‐Feature: The speed can be changed by the computer.

Use‐Safety Key System: Insert the safety key in safety key base then fold up safety key to light

up the screen of console and fold down safety key to turn off the screen of console. If console

can not be lighted up by fold up the safety key or console can not be turned off by fold down the

safety key, which will be that safety key System is malfunction.

Use‐Safety key : After fold up safety key as the safety key is vertical, which means the treadmill

is under using, when user pull out the safety key backwards, which will fold down the safety key

as the safety key is horizontal and powered off the machine.

Use‐Safety: The function of the emergency stop: The Safety Key functions as the emergency

stop. In an emergency situation, remove the Safety Key from the console and the treadmill will

come to a stop.

Use‐Scope: The exerciser may not be used by persons with a weight of over 115 kg.

Use‐Scope: This product is designed for the physical exercise by adults. Please ensure that children

only use it under adult supervision

Use‐Environment: Ensure that those present are aware of possible hazards, e.g. movable parts

during training.

Use‐Environment: Ensure that sufficient space is available to use the home exerciser with 2m long x

1m wide of clearance behind it and 1m of clearance for its flanks.

Use‐Environment: Place the home exerciser on an even, non‐slippery surface.

Use‐Environment: Please ensure that liquids or perspiration never enter the electronic.

GB

Use‐Environment: Keep the equipment indoors, away from moisture and dust. Do not put the

equipment in a garage, covered patio or near water. If stored in this location you warranty will be

affected.

Use‐Environment: The product is made for home use only. Warranty and manufacturer's liability do

not extend to any product or damage to the product caused by commercial use.

User‐Health: Consult your physician before starting with any exercise programs to receive advice on

the optimal training technique.

User‐Health: Incorrect/excessive training can cause health injuries.

User‐Health: If you feel sickness, chest pain, fits of dizziness or breathlessness during your training,

stop training immediately and consult your physician.

Product‐Preparation: Ensure that training only starts after correct assembly, adjustment and

inspection of the home exerciser.

Product‐Preparation: Follow the steps of the assembly instruction carefully.

Product‐Preparation: Only use suitable tools for assembly and ask for assistance if necessary.

Product‐Preparation: Only use original Yowza parts as delivered (see checklist).

Product‐Preparation: Tighten all adjustable parts to prevent sudden movement while training.

Product‐Preparation: We suggest using an equipment mat to prevent damage on the ground.

Use‐Instruction: Please follow the advice as per correct training technique as detailed in the

instructions.

Use‐Instruction: Do not use the home exerciser without shoes or with loose fitting footwear.

Use‐Safety: Be aware of the position and proper fixation ofadjustable or moving parts while mounting

or dismounting the home exerciser. Use‐Safety: Allow the belt to fully stop before dismounting.

Use‐Safety: Pay attention: never insert any part of your body or clothes into the body of the

treadmill while it is running or ready for use.

Use‐Safety: Attach the emergency stop cord to your clothing before starting the treadmill. The

Treadmill has an emergency stop mechanism for your safety. Before starting your workout, fasten

the cord of the safety key to your clothing. If the treadmill has been shut down by removing the

safety key, restart it by reinserting the key. An automatic restart of the treadmill belt does not

occur. An unmonitored use of the treadmill by other people can be prevented by removing the

safety key and keeping it safely hidden. In case of any emergency, hold on tightly to the handrail or

handle bar with both hands and leave the treadmill by means of the anti‐slipping surface of the

lateral platform. Activate the emergence stop mechanism (safety cut‐out).

Use‐Safety: Please keep the safety key in a safe place and ensure that it is kept out of reach of

children!

Product‐Power‐Safety: The unit requires a power supply of 220V – 240V / 50Hz. It should be

connected to a safety socket with a dedicated 10A fuse. Before powering on and using the unit

confirm that the the unit is plugged into the appropriate power supply (observe markings) has been

connected properly.

GB

Product‐Maintenance: If the equipment is in regular use, check all its components thoroughly every

1 – 2 months. Pay particular attention to the tightness of bolts and nuts. This applies especially to the

securing bolts for saddle and handlebars.

Product‐Maintenance: Incorrect repairs and structural modifications (e.g. removal or replacement of

original parts) may endanger the safety of the user.

Product‐Maintenance: Damaged components may endanger your safety or reduce the lifetime of the

equipment. For this reason, worn or damaged parts should be replaced immediately and the user

should refrain from using the equipment until this has been done.

Product‐Maintenance: Only use original Yowza replacement parts.

Product‐Maintenance: Do not under any circumstances carry out electrical repairs or alterations

yourself. Always ensure that such work is done by a properly qualified electrician/mechanic or the

advise of the Technical Support team is sought firstly

Product‐Maintenance: Disconnect the apparatus from the mains before doing repair, maintenance

or cleaning work.

WARNING! Heart rate monitoring systems may be inaccurate. Over exercising may result in

serious injury or death. If you feel faint stop exercising immediately.

GB

Assembly

GB

Unfold

1.

2.

"CLICK"

GB

3.

4.

1

2

GB

Folding

1.

2.

1

2

GB

3.

4.

GB

5.

6.

GB

IWM WEIGHT SCALE SET UP

GB

Transport

GB

Correct Use

Correct biomechanical position: Please refer to left

picture. Running straight on the treadmill is made

easier by focusing on a fixed object in front of you in

the room. Run as if you wanted to approach the

object. Always keep a distance which you can reach

the front hand bar.

Major exercise type: This equipment focuses on your

lower body, and it can train your thigh and shank

muscles

Important: Incorrect/excessive training can cause

health injuries.

GB

Adjusting the incline

The treadmill has two levelsofinclination:

The level can be changed by adjusting the inclination leg. Use the handle (A) to lift the treadmill with

one hand and adjust the inclination leg with the other hand as shown in the drawing (B).

GB

Deck Lubrication

GB:

Deck Lubrication

The walking belt has been pre‐lubricated at the

factory. However, it is recommended that the

walking board be checked periodically for

lubrication to ensure optimal treadmill

performance. Please ensure the lubrication of the

running belt is checked every 4‐6 weeks after the

initial 100 miles/kilometers of use.

Every 30 days or 30 hours of operation lift the

sides of the walking belt and feel the top surface

of the walking board as far as you can reach. If

you feel signs of silicone, no further lubrication is

required. If it feels dry to the touch, follow the

instructions below. Please use a non‐petroleum

based silicone.

To apply lubricant to the walking belt:

1. Position the walking belt so that the seam is

located on top and in center of the walking

board.

2. Insert the spray nozzle into the spray head of

the lubricant can if a nozzle is required.

3. While lifting the side of the walking belt,

position the spray nozzle between the

walking belt and the board approximately 6"

from the front of the treadmill. Apply the

silicone spray to the walking board, moving

from the front of the treadmill to the rear.

Repeat this on the other side of the belt.

Spray approximately 4 seconds on each side.

4. Allow the silicone to "set" for 1 minute

before using the treadmill.

GB

Runningbelt Adjustment

Running belt adjustment

This information forms part of the self maintenance and must be carried out periodically by the user*

Proper maintenance is very important to ensure your treadmill is always in top working condition.

Improper maintenance could cause damage or shorten the life of your treadmill and exceed the LIMITED

WARRANTY coverage.

IMPORTANT: Never use abrasives or solvents to clean the treadmill. To prevent damage to the

computer, keep liquids away and keep it out of direct sunlight. Inspect and tighten all parts of the

treadmill regularly. Replace any worn parts immediately.

Belt Adjustment

The running belt has been adjusted properly by the factory. However transportation, uneven flooring or

other unpredicted reasons could cause the belt to shift off centre resulting in the belt rubbing with the

plastic side rail or end caps and possibly causing damage. To adjust the belt back to its proper position

please follow the directions below:

If the belt has only moved by 1‐2mm this will not affect the operation of your

treadmill

1. If your belt tends to walk to the right, simply adjust the left belt tension bolt by turning it 1/4 turn counter

clockwise. Follow with a test.

2. If your belt tends to walk to the left, rotate the left tension bolt clockwise 1/4 turns at a time, and

follow with a test. If the belt continues to walk to the left, simply adjust the right tension bolt counter

clockwise.

3. If your belt appears to be loose, simply tighten both bolts evenly 1/4turn. If it appears tight, simply

loosen both bolts evenly 1/4 turn.

WARNING! There are two white line with 8mm width on the two side of the running belt but still have

gaps away from both side rails, if any side of white line have been totally covered by side rail, it means

the running belt is not in the middle, which may cause running belt rubbing side rail. Therefore, if the

running belt is not in the middle then the running belt should be adjusted to proper position to keep the

same gaps between side rails and running belt.

For running belt adjusting, the running belt must be adjusted under the running belt is running within

8‐10 km/h speed and to clockwise fasten the right side of rear roller by hex key or to anticlockwise loose

the left side of rear roller by hex key when white line of right side has been totally covered by right side

rail till this white line totally exposed. On the other hand, clockwise fasten the left side of rear roller by

hex key or to anticlockwise loose the right side of rear roller by hex key when white line of left side has

been totally covered by left side rail till this white line totally exposed

Do not over tighten rollers! This will cause premature roller bearing failure!

8mm white lines

GB

Exploded view

802 106104105

106

107110

109

111

101

102

103

108

801

801

801

835

112

113

837

837114

115

804

GB

808

201

204

810

219

213

820

833

218

207208

220

205

846

824

203

215

820

216

217

214

211

213

219

820

833

218

202

820824

220

205

210

214

846211209

808

836

836

836

836

827

827

230

230

836

841

827

231

231

810

232

232

849

849

849

849

GB

409

407

801

405

406

801 408

818

821

423822

422421

827

424

831

806

828

832

826

402

401

412 413

414

810820

804

411 812

404801

429

432

431

419307

307

418

811

810

416

826

415

829410

416

415

418

410

826

813

813

840

840

801

801

801

801

427

801

428

839839

801

801

838

838

417

425

840

802

417

425

840

802

317

317

847

847

430

842

GB

303

302

311823

816

310

823

815

306

306

307

307

305

819

304

510

830

830

801

315

802

802

315

802

315

315

802

315802

504

843

316

844

820

802

826

821826 821

809

809

308

308

309

834

309

834

317

317

848

848

GB

505

505

503

502

501

502

503

507

506

810

810

803

508

509

814

509

814

GB

Spare Part List

Part No. Part name Qty

T1.9MIWM-101 Console housing -rear 1

T1.9MIWM-102 computer 1

T1.9MIWM-103 Safety Key base 1

T1.9MIWM-104 Safety Key base fix bracket 1

T1.9MIWM-105 Safety Key 1

T1.9MIWM-106 Console housing holder 2

T1.9MIWM-107 Loudspeaker upper cover 1

T1.9MIWM-108 Console housing -lower 1

T1.9MIWM-109 Loudspeaker 2

T1.9MIWM-110 Computer EVA sticker 1

T1.9MIWM-111 Loudspeaker lower cover 1

T1.9MIWM-112 Computer display overlay 1

T1.9MIWM-113 Computer Button overlay 1

T1.9MIWM-114 I pod dock 1

T1.9MIWM-115 I pod dock holder 2

T1.9MIWM-201 Fold up grip 1

T1.9MIWM-202 Upright -left 1

T1.9MIWM-203 Upright -right 1

T1.9MIWM-204 Console housing support tube 1

T1.9MIWM-205 Hand pulse sensor 2

T1.9MIWM-206 Handlebar cover decorate cover-front 2

T1.9MIWM-207 Handlebar cover right -inner 1

T1.9MIWM-208 Handlebar cover right -outside 1

GB

T1.9MIWM-209 Handelbar cover left -inner 1

T1.9MIWM-210 Handlebar cover left -outside 1

T1.9MIWM-211 Side handlebar 2

T1.9MIWM-212 Folding system connectible plate 1

T1.9MIWM-213 Stationary pin OD12X32 2

T1.9MIWM-214 ø2X3-ø15X16 Spring 2

T1.9MIWM-215 Fold up grip connect rod 2

T1.9MIWM-216 ∮1.8X14X49X10 Spring 2

T1.9MIWM-217 Upright lock pin 2

T1.9MIWM-218 Fold up grip connector 2

T1.9MIWM-219 Fold up grip connecting bushing 2

T1.9MIWM-220 OD6X12-9X3 Plastic insert 4

T1.9MIWM-230 Handlebar cover decorate cover-front 2

T1.9MIWM-231 Handlebar Foam grip 2

T1.9MIWM-232 Upright Sleeve ID25XOD31XOD35X13 4

T1.9MIWM-274 IWM Scale 1

T1.9MIWM-301 Foam cushion 6

T1.9MIWM-302 Transformer 1

T1.9MIWM-303 Control board 1

T1.9MIWM-304 Main Frame 1

T1.9MIWM-305 Rear transport wheel bracket 1

T1.9MIWM-306 Rear transport axle cap 2

T1.9MIWM-307 Transportation wheel ID16XOD63.5X24 4

T1.9MIWM-308 Square foot 60X40X19 2

T1.9MIWM-309 M8X30 bump bolt 2

GB

T1.9MIWM-310 Rear roller tube 1

T1.9MIWM-311 Front roller tube 1

T1.9MIWM-312 Main frame supporting foot assembly-left 1

T1.9MIWM-313 Motor holder bracket end cap 4

T1.9MIWM-314 Main frame supporting foot assembly-Right 1

T1.9MIWM-315 Wire clip OD7X10X24 4

T1.9MIWM-401 Motor Cover-upper 1

T1.9MIWM-402 Motor hood decorate cover-upper 1

T1.9MIWM-404 Motor Cover-Front 1

T1.9MIWM-405 Motor Cover-Bottom 1

T1.9MIWM-406 Upright lower cover-right 1

T1.9MIWM-407 Upright lower cover-left 1

T1.9MIWM-408 Motor hood side cover -right 1

T1.9MIWM-409 Motor hood side cover -left 1

T1.9MIWM-410 Transport wheel bracket connecting bushing 2

T1.9MIWM-411 Power switch board 1

T1.9MIWM-412 Power Switch-16A 1

T1.9MIWM-413 Electric protector 230V-10A 1

T1.9MIWM-414 Electric outlet 1

T1.9MIWM-415 Stationary pin OD8X17 2

T1.9MIWM-416 Fold up foot 2

T1.9MIWM-417 Connecting plate 2

T1.9MIWM-418 Transport wheel bracket connecting tube 2

T1.9MIWM-419 Transport wheel bracket 1

T1.9MIWM-420 Fold up foot cover 2

GB

T1.9MIWM-421 Motor 1

T1.9MIWM-422 Motor holder 1

T1.9MIWM-423 Driving belt 1

T1.9MIWM-424 PU Cushion 8X26X11 1

T1.9MIWM-425 Spring ∮1.2X10.7X61X33 2

T1.9MIWM-427 washer 21X13X0.7 1

T1.9MIWM-428 side rail front decroate cover -Left 1

T1.9MIWM-429 side rail front decroate cover -Right 1

T1.9MIWM-501 Running belt 1

T1.9MIWM-502 Side rail 2

T1.9MIWM-503 Side rail decorate cover 2

T1.9MIWM-504 Side rail end cap-right 1

T1.9MIWM-505 Side rail end cap-left 1

T1.9MIWM-506 Rear end cap - right 1

T1.9MIWM-507 Rear end cap - left 1

T1.9MIWM-508 Running deck 1

T1.9MIWM-509 Side rail guider 8

T1.9MIWM-510 Belt cover- bottom 1

T1.9MIWM-601 Grounding cable 1

T1.9MIWM-610 2 pin Safety key cable 1

T1.9MIWM-620 Hand Pulse Sensor wire 2

T1.9MIWM-630 Seven pin cable 1

T1.9MIWM-631 M4X12 Screw 53



GB


T1.9MIWM-805 M8X48 Bolt 1


T1.9MIWM-807 M8X45 Allen Bolt 4


T1.9MIWM-809 M5X14 Screw/washer 4

T1.9MIWM-810 Round Head Screw M5X14 10








T1.9MIWM-818 Outside hex head screw M10X80 1

T1.9MIWM-819 Head hex screw M12X25 2

T1.9MIWM-820 M5 Thin Nut 10

T1.9MIWM-821 M8 Nut 3

T1.9MIWM-822 M10 Nut 1

T1.9MIWM-823 6.2X13X1.2 Washer 3

T1.9MIWM-824 6.4X18X1.5 Washer 2

T1.9MIWM-825 8X17X1.5 Washer 6

T1.9MIWM-826 8.5X16.5X1.5 Washer 8

T1.9MIWM-827 10.5X20X1.5 Washer 1

T1.9MIWM-828 9X35X8 Curved Washer 2

GB

T1.9MIWM-829 M10 C-clip 10

T1.9MIWM-830 12X25X3 Washer 2

T1.9MIWM-831 8X14X2 Washer 2

T1.9MIWM-832 OD8XM8X78X25 Bolt 1


T1.9MIWM-834 M8 Thin Nut 2


T1.9MIWM-836 M4X15 Allen head 7


T1.9MIWM-839 washer 21X13X0.7 2

T1.9MIWM-840 M6X10 screw 4

T1.9MIWM-841 Owner manual 1

T1.9MIWM-847 “C” clip - M15 2

T1.9MIWM-848 Cup head hex screw M6X12 2

T1.9MIWM-849 “C” clip – M25 4



A Power cord 1

B Silicone oil bottle 1

GB

Before assembling or using your fitness equipment, please do carefully read the precautions included in

the assembly instruction.

DISPLAY

SPEED (1)

The calories display range is from 0 to 999.

DISTANCE (2)

The DISTANCE display range is from 0.0 to 99.9 km;

TIME (3)

The TIME display range is from 0:00 to 99:00. The initial

TIME is “32:00”

PROGRAM(4)

The range of the PROGRAM from 1 to 7

AGE (5)

The AGE display range is from 10 to 70

HEIGHT (6)

The range of the Speed is from 50 to 220CM

/1’08”‐7’03”

RECOMMEND WEIGHT (7)

The computer will display one recommend weight

according to user information.

PULSE(8)

THE pulse display 0‐199 BPM

CALORIES(9)

The calories display range is from 0 to 999.

!

GB

Buttons and Functions

START button

Press the button to start the computer or start the program.

The initial speed of 0.8 km/h / 0.5 mph

STOP / ENTER button

Press to confirm a program and preset function values under setting mode.

Press to quit preset program and function values after completing a single program.

Setting procedure: returns to beginning of setting mode before pressing the START key.

Press to stop exercise during workout time.

SPEED Up button

Press the button to increase the speed or set the program.

SPEED Down button

Press the button to decrease the speed or set the program.

IWM TEST button

Press the button to start the IWM Test set up.

VOLUME up button

Press the button to increase the Volume level

VOLUME down button

Press the button to reduce the Volume level.

GB

POWER ON

After connecting the power cord, please insert and flip up the “Safety Key” then following to turn on the Power

Switch. The LCD screen will light up.

SAFETY KEY

The safety key must be inserted into the slot and press to turn up in order to operate the treadmill. Always

insert the safety key and attach the clip to your clothing at your waist before beginning your workout. If you

should encounter problems and need to stop the motor quickly, simply pull the cord to disengage the safety key

from the console. To continue operation turn the power switch to off, turn the safety key to “on” position then

turn the switch on again.

**Please do not operate the safety key as power switch of treadmill. Please must power off the treadmill by

turning power switch off after you finish workout. Please always set the safety key in “on” position then switch

on the treadmill by power switch.

SLEEP MODE

When the power is ON the computer will automatically enter POWER OFF MODE if it is left idle for 5 minutes, press any

button to return to the power on status when the computer is in the POWER OFF MODE.

QUICK START

Press the START after power on the treadmill to enter Quick Start workout mode, when in QUICK START MODE, the

treadmill will start at 0.8km/h or 0.5 mph speed. The workout Time, Distance and approximate Calories figure will

count up from 0. The running speed will also display on screen. The user can press FAST/SLOW button to adjust

running speed.

Press the STOP button to pause the program, and START to restart, or press STOP again to return to POWER ON MODE.

COMPUTER OPERATION

Power on –When press ENTER/STOP button and set the program

GB

Program

PROGRAM 1 – TIME

1. Select the desired program by pressing the FAST/SLOW button.

2. Press STOP / ENTER to confirm the program.

3. Adjust your desired time by pressing the FAST/SLOW button., press STOP/ENTER to confirm

4. Press START to begin your exercise.

TIME: Press FAST/SLOW keys to preset time target value and press START.

The time will count down from preset target value when starting exercise. While time counts down,

the speed goes down to 0 (zero) by 0.5 km per second (when the preset target is reached).

DISTANCE: Accumulates and displays workout distance from start of exercise.

CALORIES: Accumulates and displays calories consumed during workout time.

SPEED: Displays current speed.

To pause the program while exercising, press the STOP/ENTER button. To resume exercising, press the “START” button.

To stop the program press the STOP/ENTER button twice.

PROGRAM 2 – DISTANCE



3. Adjust your desired distance by pressing FAST/SLOW and confirm with STOP/ENTER


DISTANCE: Press SPEED FAST/SLOW to preset the distance target values and press START.

The distance will count down from preset target value. While distance counts down to 0 (zero),

speed goes down to 0 (zero) by 0.5 km/h per second (when the preset target is reached).

TIME: Accumulates and displays workout time from start of exercise.





GB

PROGRAM 3 – CALORIES



3. Adjust your desired calories by pressing the FAST/SLOW button, press STOP/ENTER to confirm.


CALORIES: Press SPEED FAST/SLOW keys to preset calories target value and press START.

Calories will count down from preset target value. While the distance counts down to 0 (zero),

the speed goes down to 0 (zero) by 0.5 km per second (when the preset target is reached).






PROGRAM 4– 20 MINUTES PRESET SPEED






PULSE: Detects and displays current heart rate.


SPEED: Displays current speed for desired speed or will run at appointed speed

TIME 20‐‐17 17‐‐14 14‐‐11 11‐‐8 8‐‐5 5‐‐0

SPEED KM/H 8 9 10 11 12 13

ML/H 5 5.6 6.3 6.9 7.5 8.1



GB










TIME 40‐‐37 37‐‐34 34‐‐31 31‐‐28 28‐‐16 16‐‐1 1‐‐0

SPEED KM/H 4 5 6 7 8 9 10

ML/H 2.5 3.1 3.8 4.4 5 5.6 6.3












TIME 60‐57 57‐54 54‐51 51‐48 48‐45 45‐24 24‐21 21‐0

SPEED KM/H 3 4 5 6 7 8 7 6

ML/H 1.9 2.5 3.1 3.8 4.4 5 4.4 3.8

To pause the program while exercising, press the STOP/ENTER button. To resume exercising, press the “START”

button. To stop the program press the STOP/ENTER button twice.

GB

IWM PROGRAM.

INTELLIGENT WEIGHT MANAGEMENT PROGRAM OPERATION PROCEDURES:

1. Keep the safety key on “ON” position then turn on the power of treadmill. Press the button of “IWM” on

console, the light would start blinking. The blinking light on IWM button means that console is waiting

for a signal of users weight measurement from weighing scale. Stand on scales steady until the body

weight figure displays on scale and blinks 3 times. The body weight figure will be transmitted to console

display automatically. The IWM light will stop blinking and have one “beep” after the users weight data

is received. You will see the users weight figure that records on the console screen.

2. Press FAST/SLOW buttons to select user ID (between 1 to 7) then press ENTER to confirm.

3. Next set the users age. The default age is 30, press FAST/SLOW buttons to adjust the user age. Press

ENTER button to confirm.

4. Now set the user height. Press FAST/SLOW buttons to adjust the users height then press ENTER button

to confirm.

5. After the user profile set up is complete, the console will display the recommend user weight on

“RECOM.” weight numbers which are calculated through users height based on standard BMI

measurements. You can compare the exact body weight and recommend body weight. The console

will also automatically generate personalized workout program with target calories and target distance.

All you need to do now is press START button and enjoy your workout. After starting the exercise

program, the target calories and distance will countdown till zero. The console will adjust speed

automatically.

6. You can adjust the speed and incline by pressing FAST/SLOW during exercise. The workout time will be

changed according to speed change. For example, if you increase speed manually then the workout time

will become shorter accordingly. This is due to It because the target calories been preset by IWM, once

you increase speed the workout time will become shorter to maintain the same calories consuming.

GB

OPERATING INSTRUCTIONS

1. Put the scale on a hard and flat floor, it doesn’t perform well on carpet or other soft surface, just stand on

the scale, it will switch on automatically. Stand on the scale in balance and start to weigh, when the

weight is set, the figure will flash 3 times and then you can read it.

2. The scale will automatically turn off after 6 seconds without operation. You can also turn off this scale by

yourself by using the switch on the bottom of the scale, on the left is KG, in the middle is switch off and

right is LB.

3. Please replace the battery if the screen displays was showed “Lo”.

4. Re‐start if the screen shows “Err”.

5. Please note that the figure shows on the display MAYNOT equals to the real weight of your body for the

first use, this is for zero tracking setup only ,after the initial setup, your scale is ready to use and accurate.

CALIBRATION PROCEDURES OF WEIGHT SCALE

This weight scale is sensitive weight measurement device. It will self calibrate when user switch on the power.

It needs calibration in following occasions:

- Switch on the power into KG or LB mode.

- Change the battery.

- Move the scale to different place.

- To avoid incorrect weight measurement, please follow below procedures. Please do not switch off the

weight scale after usage, this scale has power saving mode. It will automatically turn on when user step

on. Following procedures are required when user switch on the power, change battery or move

weight scale to different place.

GB

- STEP 1: Switch on the power into KG or LB mode to turn on the screen, or reset the weight scale by

switching to off then back to KG or LB mode. Hold the weight scale without place on floor until the

screen turn off (it takes around 10 seconds).

- STEP 2: Place the weight scale on floor.

- STEP 3: Stand on weight scale, the figure of first time measurement might not precise. After the body

weight figure fixed on screen, leave scale until the screen turn off.

- STEP 4: Now you can step on weight scale again and it shows actual weight.

- FAQ:

- Q: Why my weight scale cannot figure the body weight precisely? It sometimes measure +2kg or +3kg

upon the actual body weight.

- A: Please perform the procedures of calibration. The weight scale will have precise measurement after

self calibrated.

- Q: Shall I perform the calibrate procedure when switch from KG to LB directly (or reverse)?

- A: Yes, the calibration is necessary or the weight scale might not work precisely.

SPECIFICATIONS

- Capacity: 200kg/400lb

- Division:0.1kg/0.2lb

- Display: LCD with 4 digits

- Power: 2 Pieces, AAA battery

- Temperature for working: 10‐35°C

- Just stand on it for start and the weight scale will automatically off.

- Units: kg/lb

- Low battery indication: “Lo”

GB

ATTENTIONS

1. The scale is not a toy, please keeps the children away from it.

2. Don’t put too much things on it in order to protect the scales and battery in it.

3. Stand on the center of the scale to prevent slipping.

4. Keep stable when you are on the scale otherwise the numbers can’t be locked.

5. Big crash is not allowed.

6. Do not use water to clean or put it in water, you can just use a wet cloth to clean,

7. Chemicals are not allowed.

8. Please don’t let the water into device.

9. Away from fire.

10. There is a new battery in it before been packed.

GB

Heart Rate diagram

You can calculate the target‐heartrate for your training as follows:

Maximum heartrate = 220 minus age

For the different trainingtargets you should train with the following percentage of your maximum heartrate:

Health/Fat Burning: 50 – 70% of your max. heartrate

Fitness/Bodyshaping: 70 – 80% of your max. heartrate

Performance: 80 ‐ 90% of your max. heartrate

Example:

You are 25 years old and want to train for the target Fitness:

220 – 25 = 195

70% of 195 = 136,5

80% of 195 = 156

Your target‐heartrate should be between 136,5 and 156 beats per minute.

This information is for your reference only. To determine your individual training intensity or in case you

should have health restrictions please consult your physician before starting exercising.

!

GB

Domestic Warranty

Orbit warrants T1.9 iWM treadmill free from defects in material and workmanship under normal use at home

for One year, from date of purchase. Our goods come with guarantees that cannot be excluded under the

Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation

for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or

replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

WHO IS COVERED

The warranty is extended to individual or legal entity whose name appears on the warranty registration card

filed with Orbit and may not be transferred to any other individual or legal entity.

WARRANTY REGISTERATION AND PROCEDURE

Warranty commitment are valid only with a completed warranty card that is returned within 15 days from the

date of purchase that includes the product serial number (whereever applicable) and details of purchase. Proof

of purchase from Orbit authorised dealer or distributor will be required when raising a warranty claim.

To lodge a warranty claim, please contact Orbit Service department during business hours at Unit 310, 396

Scarborough Beach Road, Osborne Park, WA 6017 in person or via post, by telephone 0061‐8‐94444055 or by

e‐mail [email protected] within the warranty period. Associated cost of warranty claim, including

labour and transport cost are to be borne by customers.

What is covered

Structural Frame: Lifetime warranty

Mechanical/Electrical parts: 1 year limited warranty

Drive motor: 3 years limited warranty

Wear items (running belt, deck, plastic parts) 1 year limited warranty

Items Not Covered

The warranty does not apply to any failure of the product, or any parts of the product, due to alterations,

modifications, misuse, abuse, accident, improper maintenance, or if the serial number on the product has been

removed, altered, or defaced. Failure to follow warning in the owners manual, or handouts given at the time of

purchase. Normal wear and tear. Pickup and delivery of the product in question. Adequate packing must be used

for returned goods to prevent freight damage.

Maintenance

Caution – for safe operation

Always inspect hardware prior to operation. Repair or replace any damaged or worn parts, tighten all loose

hardware.

As part of Orbit’s normal installation and set‐up process, all bolts must be tightened and checked after the first 1

to 2 hours of initial usage and then periodically, Untightened bolts and nuts may come loose, causing damage,

which may void warranty and be dangerous to the user.

After training, always wipe down your Orbit machine. Perspiration that continuously settles on the frame and

pads may cause rust or damage to the unit. Damage resulting from lack of proper maintenance will not be

covered under warranty. To clean upholstery and frame, use a mild soap and warm water. Dry with a clean

towel.

If any cracks appear in the frame, contact your authorized Orbit Fitness dealer.

GB

Important Important Important ! Important !

WARRANTY CARD MUST BE COMPLETED AND RETURNED TO ORBIT WITHIN 15 DAYS OF PURCHASE. Failure to

comply may void manufacture’s warranty.

Name

Address

Email

Phone

Date of birth

Male female

Single married

Model purchased

Date of purchase / invoice number

Is this your first orbit purchase

Yes, I want to be on Orbit’s mailing list !

What other products do you have

Home gym

Weights

Bench

Treadmill

Rowing machine

Ellipticial

Stepper

Other

Environment unit placed

Home Light Commercial Hire

Mailing address

Orbit Health & Fitness Solutions

Unit 3, 470 Scarborough Beach Road

Osborne Park, Western Australia 6017

T1.9 IWM USER MANUAL - Orbit Fitness · GB Dear Customer, We are pleased, that you have chosen an...

Documents

Transcript of T1.9 IWM USER MANUAL - Orbit Fitness · GB Dear Customer, We are pleased, that you have chosen an...