T Series Thermostat Guard Installation Guide...T SERIES THERMOSTAT GUARD INSTALLATION GUIDE This...

4
INSTALLATION INSTRUCTIONS 33-00279EFS-03 T Series Thermostat Guard Installation Guide INSTALLATION 1. Mount guard base over existing thermostat or use optional guard wallplate (see Fig. 1 and Fig. 2). 2. Mount guard cover and lock guard. Fig. 1. Mount guard and thermostat to wall. Fig. 2. Mount guard wallplate with guard base and thermostat on junction box. GUARD WALLPLATE (OPTIONAL) GUARD BASE UWP THERMOSTAT MOUNTING SCREWS (4) MOUNTING HOLES (4) WALL M36772 GUARD COVER GUARD WALLPLATE GUARD BASE UWP THERMOSTAT SECURING SCREWS (4) WALLPLATE POSTS (4) M36773 GUARD COVER HORIZONTAL OUTLET BOX

Transcript of T Series Thermostat Guard Installation Guide...T SERIES THERMOSTAT GUARD INSTALLATION GUIDE This...

INSTALLATION INSTRUCTIONS

33-00279EFS-03

T Series Thermostat GuardInstallation Guide

INSTALLATION1. Mount guard base over existing thermostat or use optional guard wallplate (see Fig. 1 and Fig. 2).2. Mount guard cover and lock guard.

Fig. 1. Mount guard and thermostat to wall.

Fig. 2. Mount guard wallplate with guard base and thermostat on junction box.

GUARD WALLPLATE(OPTIONAL)

GUARD BASE

UWP

THERMOSTAT

MOUNTING SCREWS (4)

MOUNTING HOLES (4)

WALL

M36772

GUARD COVER

GUARD WALLPLATE

GUARD BASE

UWP

THERMOSTAT

SECURING SCREWS (4)

WALLPLATEPOSTS (4)

M36773

GUARD COVER

HORIZONTAL OUTLET BOX

NOTICE D'INSTALLATION

Couvre-thermostat de la série TGuide d'installation

INSTALLATION1. Monter le boîtier du couvre-thermostat sur le thermostat existant ou utiliser la plaque murale facultative

du couvre-thermostat (voir Fig. 1 et Fig. 2).2. Monter le couvre-thermostat et le verrouiller en place.

Fig. 1. Montage du couvre-thermostat et du thermostat au mur.

Fig. 2. Montage de la plaque murale du couvre-thermostat, de la base ducouvre-thermostat et du thermostat sur une boîte de jonction.

PLAQUE MURALE DU COUVRE-THERMOSTAT (FACULTATIVE)

BASE DU COUVRE-THERMOSTAT

UWP

THERMOSTAT

VIS DE MONTAGE (4)

TROUS DEMONTAGE (4)

MUR

MF36772

COUVERCLE DE PROTECTION

BASE DU COUVRE-THERMOSTAT

UWP

THERMOSTAT

VIS DE FIXATION (4)

MF36773

COUVERCLE DE PROTECTION

BOÎTE DESORTIEHORIZONTALE

PLAQUE MURALE DU COUVRE-THERMOSTAT

TIGES DE LAPLAQUE MURALE (4)

INSTRUCCIONES DE INSTALACIÓN

Cubierta para termostato T seriesGuía de instalación

INSTALACIÓN1. Monte la base del protector sobre el termostato actual o utilice la placa opcional de pared para el protector

(ver Fig. 1 y Fig. 2).2. Monte la cubierta del protector y tranque el protector.

Fig. 1. Monte el protector y el termostato en la pared.

Fig. 2. Monte la placa de pared para el protector con la base del protector y el termostato en la caja de conexiones.

PLACA DE PARED PARA EL PROTECTOR (OPCIONAL)

BASE DEL PROTECTOR

UWP

TERMOSTATO

TORNILLOS DE MONTAJE (4)

AGUJEROS DEMONTAJE (4)

PARED

MS36772

PROTECTOR

PLACA DE PAREDPARA EL PROTECTOR

BASE DEL PROTECTOR

UWP

TERMOSTATO

TORNILLOS DE FIJACIÓN (4)

POSTES DE LAPLACA DE PARED (4)

MS36773

PROTECTOR

CAJETÍNHORIZONTAL

T SERIES THERMOSTAT GUARD INSTALLATION GUIDE

This product is manufactured by Resideo Technologies, Inc., Golden Valley, MN, 1-800-633-3991©2019 Resideo Technologies, Inc. The Honeywell Home trademark is used under license from Honeywell International Inc. All rights reserved.La marque de commerce Honeywell Home est utilisée sous licence avec l’autorisation d’Honeywell International Inc. Tous droits réservés.La marca comercial Honeywell Home se utiliza en virtud de la licencia emitida por Honeywell International Inc. Todos los derechos reservados.

www.resideo.com

Resideo Inc., 1985 Douglas Drive North,Golden Valley, MN 55422

33-00279EFS—03 M.S. Rev. 03-19 | Printed in United States