T SeriesExtra Heavy Duty, Grade 1 Cylindrical Lever Locks

FalconMonarchDor-O-Matic

T H E F A L C O N D I F F E R E N C E

S A F E T Y , S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E

At Falcon, we know that every product you sell not only has to meet local building codes, but

also your expectations for performance and quality. We take your expectations seriously, and

that’s why we build our locks to deliver durability, convenience and unmatched value. After all,

we’ve built our reputation on the same standards that you have – providing quality products at a

reasonable price delivered on time. It’s the way we do business and it’s what makes Falcon locks a

powerful choice no matter what your project.

2

F A L C O N T S E R I E S

S A F E T Y , S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E

3

Proven compression spring design supports levers, eliminating lever sag and provides years of reliable service

Simply put, the Falcon T-Series lock is the most versatile lockset

in the industry. This extra heavy duty lock can accept any

manufacturer’s cylinder, and the cylinder can easily be removed

for quick, easy re-keying. Redesigned with a compression spring

behind the cylinder, the T-Series is now stronger than ever and

lever sag has been virtually eliminated. This adaptable lock is well

suited to either new construction or retrofit use in buildings as

varied as multi-family, retail, institutional and government/military.

F E A T U R E S

Heavy wrought brass or bronze roses over steel through-bolted rose inserts

PressureRelease™ outside lever disengages when locked to protect internal mechanisms

Brass or cold-formed steel construction, zinc plated and dichromated for rust resistance

4

T S E R I E SL E V E R D E S I G N S

LeversLevers are solid pressure cast zinc, finished to match mating parts. Roses are wrought brass or bronze installed over steel through-bolted rose inserts. Pressure Release™ levers are standard. Levers are secured by a spring-loaded retainer. Retainer cannot be depressed when locks have been locked.

Abrasive Coated LeversAll levers are available with abrasive coating along the length of the lever to identify entrances to hazardous areas to the handicapped. To order add: “with abrasive coated outer lever” in detail section of order.

AAvalon

QQuantum

5”

3-1/2”

3-1/4”

DDane

5”

3-1/2”

3-1/4”

5”

3-1/2”

3-1/4”

5

Falcon T-series locks feature our high performance compression springs. This newly designed spring far exceeds ANSI/BHMA requirements for cycle tests, and ensures the most robust support for levers. Unlike typical torsion springs that can break at the bend points, this new design will provide years of reliable service even in high-use applications. A retrofit kit is available to outfit your existing T-series locks with this new, more robust spring design.

Machined steel lever spindle carries high levels of torque and shear. This spindle is re-used when upgrading existing locks to the new design. Heavy-duty case zinc rose insert accommodates

the new style spring. This insert is replaced when upgrading to the new design.

Stainless steel compression springs replace steel torsion springs, providing the most reliable and robust method of supporting levers.

New stamped steel torque plates hold the springs in place and transfer the spring energy to the spindle and lever assembly.

New retaining ring holds the assembly together.

To order Falcon T Series locksets, please consult page 15 for ordering information and assistance.

Indicates interchangeable core available.

Catalog Number

Function DescriptionANSI No. & Grade

T101Passage/Closet Latchset Latch bolt by levers at all times.

F75-1

T301

Privacy Lock Latch bolt by levers. Outside lever locked by push button in inside lever. Rotating inside lever or closing door releases push button. Emergency release in outside lever unlocks door.

F76-1

T351Closet Lock Deadlocking latch bolt by turn knob inside or lever outside except when outside lever is locked by key.

T381

Classroom Security Lock Deadlocking latch bolt by levers from either side except when outside lever is locked by key from inside. Outside key only retracts latch. Outside lever is locked and unlocked only by inside key.

F88-1

T411Asylum Lock Deadlocking latch bolt operated by key in lever from either side. Both levers always inoperable.

F87-1

T501Entry Lock Push button locking. Button on inside locks outside lever until unlocked by key or by rotating inside lever. Inside lever always free. Deadlocking latch bolt.

F82-1

T511

Entry/Office Lock Turn/push button locking. Pushing and turning button locks outside lever requiring use of key until button is manually unlocked. Push button locking. Pushing button locks outside lever until unlocked by key or by rotating inside lever. Inside lever always free. Deadlocking latch bolt.

F109-1

T521Office Lock Turn button locking. Turning button locks outside lever requiring use of key until button is manually unlocked. Inside lever always free. Deadlocking latch bolt.

F81-1

T561Classroom Lock Deadlocking latch bolt by levers. Outside lever is locked by key in outside lever. Inside lever is always free.

F84-1

T S E R I E SF U N C T I O N S

6

To order Falcon T Series locksets, please consult page 15 for ordering information and assistance.

Indicates interchangeable core available.

Catalog Number

Function DescriptionANSI No. & Grade

T571

Dormitory Lock Deadlocking latch bolt by levers except when locked by push button in inside lever. Key in outside lever locks or unlocks outside lever and releases button. Closing door releases push button. Inside lever always free.

F90-1

T581Storeroom Lock Deadlocking latch bolt by lever inside or key outside. Outside lever is inoperable. Inside lever always free.

F86-1

T851

Storeroom (Electrified – Fail Safe) Inside Lever Always Free. Latch bolt operated by lever from either side except when outer lever is electrically locked. When outer lever is locked (inoperable), latch bolt retracted by key in cylinder outside. 24 volt DC .185 Amps, continuous duty.

T881

Storeroom (Electrified – Fail Secure) Inside Lever Always Free. Deadlocking latch bolt operated by lever inside at all times. Outside lever inoperable until electrically unlocked, then latch bolt from either side. When outside lever is inoperable latch bolt retracted by key in cylinder outside. 24 volt DC .185 Amps, continuous duty..

T12Dummy Trim Single Trim-surface mounted rigid lever.

7

FALCONFALCON

Standard 6-Pin Cylinders*

• Arrow • Lori • Sargent

• Assa • Medeco • Schlage

• Corbin Russwin • Primus (Schlage) • Yale

I/C (Removable) Cores*

• Arrow • Medeco 32 Series • Sargent

• Best • Peaks (Kaba) • Schlage

• Corbin Russwin • Primus (Schlage) • Yale

• Medeco Keymark

Falcon Interchangeable Cores

Catalog Number

Description

C606 For use in all T Series I/C Keyed Locks – 6-pin (cover style)

C607 For use in all T Series I/C Keyed Locks – 7-pin (cover style)

CB806 For use in all T Series I/C Keyed Locks – 6-pin (cap style)

CB807 For use in all T Series I/C Keyed Locks – 7-pin (cap style)

Falcon Standard Cylinders

Catalog Number

5-Pin Cylinder 6-Pin Cylinder 7-Pin Cylinder Function

A23151-05 A23161-05 A23171-05 All Except 381 I/S, 571

A23151-06 A23161-06 A23171-06 381 Inside Cylinder

A23151-07 A23161-07 A23171-07 571

T S E R I E SC Y L I N D E R S

The Falcon T Series accepts the following competitors standard 6-pin cylinders and Interchangeable cores:

*Locks must be modified for some cylinders. Be sure to specify manufacturer when ordering.

Note: Specify finish: 606 or 626.

Specify keyway: “E”, “G” (standard), “H”, “K”, “L”, “N”, “P”.

8

Interchangeable Core Cover Style

Interchangeable Core Cap Style

Standard Cylinder

T S E R I E SC O M P E T I TO R K E Y W AY S

Standard Cylinders with Competitor Keyways–6

Catalog Number

Description Function

A23167-000 Corbin 60 ‘O’ Bitted all Except 381 IS, 571

A23167-0KDCorbin 60 ‘KD’ Keyed Different

all Except 381 IS, 571

A23168-000 Russwin D1’O’ Bitted all Except 381 IS, 571

A23168-0KDRusswin D1 ‘KD’ Keyed Different

all Except 381 IS, 571

A23174-000Corbin/Russwin L4 ‘O’ Bitted

all Except 381 IS, 571

A23166-000 Sargent LA ‘O’ Bitted all Except 381 IS, 571

A23166-0KDSargent LA ‘KD’ Keyed Different

all Except 381 IS, 571

A23160-000 Schlage C ‘O’ Bitted all Except 381 IS, 571

A23160-0KASchlage C ‘KA’ Keyed Alike 4

all Except 381 IS, 571

A23160-0KDSchlage C ‘KD’ Keyed Different

all Except 381 IS, 571

A23159-000 Schlage E ‘O’ Bitted all Except 381 IS, 571

A23169-000Yale 8 (PARA) ‘O’ Bitted

all Except 381 IS, 571

A23169-0KDYale 8 (PARA) ‘KD’ Keyed Different

all Except 381 IS, 571

A23167-011 Corbin 60 ‘O’ Bitted 381 Inside

A23167-11DCorbin 60 ‘KD’ Keyed Different

381 Inside

A23168-011 Russwin D1’O’ Bitted 381 Inside

A23168-11DRusswin D1 ‘KD’ Keyed Different

381 Inside

A23174-011Corbin/Russwin L4 ‘O’ Bitted

381 Inside

Catalog Number

Description Function

A23166-011 Sargent LA ‘O’ Bitted 381 Inside

A23166-11DSargent LA ‘KD’ Keyed Different

381 Inside

A23160-011 Schlage C ‘O’ Bitted 381 Inside

A23160-11ASchlage C ‘KA’ Keyed Alike 4

381 Inside

A23160-11DSchlage C ‘KD’ Keyed Different

381 Inside

A23159-011 Schlage E ‘O’ Bitted 381 Inside

A23169-011Yale 8 (PARA) ‘O’ Bitted

381 Inside

A23169-11DYale 8 (PARA) ‘KD’ Keyed Different

381 Inside

A23167-012 Corbin 60 ‘O’ Bitted 571

A23167-12DCorbin 60 ‘KD’ Keyed Different

571

A23168-012 Russwin D1’O’ Bitted 571

A23168-12DRusswin D1 ‘KD’ Keyed Different

571

A23174-012Corbin/Russwin L4 ‘O’ Bitted

571

A23166-012 Sargent LA ‘O’ Bitted 571

A23166-12DSargent LA ‘KD’ Keyed Different

571

A23160-012 Schlage C ‘O’ Bitted 571

A23160-12ASchlage C ‘KA’ Keyed Alike 4

571

A23160-12DSchlage C ‘KD’ Keyed Different

571

A23159-012 Schlage E ‘O’ Bitted 571

A23169-012Yale 8 (PARA) ‘O’ Bitted

571

A23169-12DYale 8 (PARA) ‘KD’ Keyed Different

571

Note: Specify finish 606 or 626.Note: Specify finish 606 or 626. IS=Inside Cylinder

9

Latches–Grade 1, UL ListedLatches for T Series locks are UL Listed. 2-3/4” backset standard.

1” width latch face minimum. Unless otherwise specified, we furnish a 2-1/4” x 1-1/8” x square corner faceplate on 2-3/4”backset latches front standard.

Note: Specify finish 606, 612, 613, 630

Square Corner 9/16”

Square Corner 3/4”

9/16” Radius Corner 9/16” Projection

Latches–Grade 2, UL Listed For Flat or Beveled Doors

Square Corner 1/2” Projection

1/4” Radius Corner 1/2” Projection

Note: Specify finish 606, 612, 613, 630

T S E R I E SO P T I O N S A N D A C C E S S O R I E S

Catalog Number

Description Faceplate Size Corner Projection

A98535-000 2-3/4” Backset Spring 2-1/4” x 1-1/8” Square 9/16”

A98535-00D 2-3/4” Backset Deadlocking 2-1/4” x 1-1/8” Square 9/16”

A98538-000 2-3/4” Backset Spring 2-1/4” x 1-1/8” Radius 9/16” 9/16”

A98538-00D 2-3/4” Backset Deadlocking 2-1/4” x 1-1/8” Radius 9/16” 9/16”

A98835-0SD 2-3/4” Backset Deadlocking 2-1/4” x 1-1/8” Square 3/4”

A98838-0SD 2-3/4” Backset Deadlocking 2-1/4” x 1-1/8” Radius 9/16” 3/4”

3 Hour

Catalog Number

Description Faceplate Size Corner Projection

A92320-000 2-3/8” Backset Spring 2-1/4” x 1” Square 1/2”

A92320-00D 2-3/8” Backset Deadlocking 2-1/4” x 1” Square 1/2”

A92321-000 2-3/8” Backset Spring 2-1/4” x 1” Radius 1/2”

A92321-00D 2-3/8” Backset Deadlocking 2-1/4” x 1” Radius 1/2”

A92330-000 2-3/4” Backset Spring 2-1/4” x 1” Square 1/2”

A92330-00D 2-3/4” Backset Deadlocking 2-1/4” x 1” Square 1/2”

A92331-000 2-3/4” Backset Spring 2-1/4” x 1” Radius 1/2”

A92331-00D 2-3/4” Backset Deadlocking 2-1/4” x 1” Radius 1/2”

Latches for T Series locks are UL Listed.

These grade 2 latches have self-adjusting fronts to accommodate beveled or flat front doors. Unless otherwise specified, we furnish a 2-1/4” x 1” x square corner faceplate on these latches.

3 Hour

10

1-1/4”

3-3/8”

1-5/16”

4-1/8”

4-7/8”

1-5/16”

1-1/2”

1-1/8”

2-3/4”

2-1/8”

1-5/16”

9/16” R

1-1/2”

1-7/8”

2-3/4”

2-1/8”

2-1/4”1-5/8”

1” 1”

2-1/4”1-5/8”

StrikesFurnished with a 4 7/8” ANSI Strike unless otherwise specified.

005164-000

ANSI Prep A115.2

A05185-000

T-Strike Square Corner

A05185-004

T-Strike 9/16” Radius

Q001-049

Full Lip, Square Corner

Q001-048

Full Lip, 1/4” Radius Corner

Long Backset Extension LinkA22161-005-00 Link for 5” Backset for use with 2-3/4” backset latches (except 3/4” projection).

A22161-005-00

Dust Boxes

K510-066-PLA (EC 3604)

1” deep. May be used with any 4-7/8” high (ANSI) strike.

012191-003-70

1/2” deep. May be used with any 2-3/4” high (T) strike.

Q001-059

7/16” deep. May be used with any 2-1/4” (Full Lip) high strike.

11

T S E R I E SC O N S T R U C T I O N K E Y I N G

Construction KeyingFalcon offers two different construction key systems depending on the size of and application within the project. Both systems permit the installation and use of regular door locks during construction, yet completely preserve the security of the keying system for the ultimate building owner. The Master, Grand Master and change keys are never with the locks during the construction phase of a building. Only the “construction” keys are sent to the job site. Where the job permits, we will utilize the “Lost Pin System” as our standard system for construction keying. Larger or more complicated jobs may require the use of our “Blockokey® System” for construction keying.

“Disposable Construction” Interchangeable CoresThis newly designed disposable construction core (1408) is an inexpensive alternative to interior keyed construction cores. This core should be used on interior door applications or where security on a site is not a concern. No keys need to be issued. The disposable core is inserted in the lever or knob and is operated by a thumb turn, which retracts the latch bolt. Please use either brass or permanent construction cores on exterior doors or secured areas.

Locks with ”Lost Pin System”Our “lost” pin construction key system consists of one construction pin and a shallow hole in the side of the plug.

CONSTRUCTIONPIN

Locks with Blockokey® CylindersAll lock cylinders on a specific project are operable by a special “project key.” Duplicates of this key may be assigned by the building contractor to workmen and subcontractors as required. No regular change keys or Master keys are needed on the job. This eliminates the possibility of subsequent exposure from lost or stolen keys.

How to order locks with Blockokey® Cylinders

Blockokey® locksets are ordered by adding the word ”Blockokey” after the balance of the ordering information.

EXAMPLE: 72 Each B511 D 626 1AA-72AA (Blockokey)

How Locks with Blockokey® Cylinders are Used

Project Key—KB531

Lock cylinder is operated by the special ”project key.” The last two pins in the cylinder are held inoperative by the key block.

Removal Tool—KB536

The special ”project key” is canceled out by removal of the key block. A key block removal tool is furnished with the Master keys for the locks. Simply push the removal tool into the keyway, then withdraw it to remove the block. Thereafter, the ”project key” will no longer operate the lock cylinder.

Change or Master Key—KB578

Cylinder is now only operable by the regular change key or Master key.

Construction Key—KB566 When the “construction” key is used, the construction pin is always in the cylinder plug, sitting on top of the bottom pin.consists of one construction pin and a shallow hole in the side of the plug.

Master Key—KB578 When the Master key is inserted, the construction pin is pushed up into the cylinder housing. As the Master key is rotated to the right, the construction pin will drop into the hole in the plug, thereby eliminating any future use of the construction key.

CONSTRUCTIONPIN

1. 2. 3.

12

T Series Grade 1 Heavy Duty Cylindrical Key-In-Lever Lock

ANSI No./Grade

Function Falcon Arrow BestCorbin/Russwin

Marks Sargent Yale

F75-1 Passage T101 H01 93KN CL3310 95N 10U15 5401LN

F76-1 Privacy T301 H02 93KL CL3320 95L 10U65 5402LN

Closet T351 - 93RZ CL3391 - - 5407LN

F88-1 Classroom Security T381 H32 93KC CL3372 95DA 10G16 5417LN

F87-1 Asylum T411 H33 93KW CL3332 95DW 10G17 5430LN

F82-1 Entry T501 H13 93KB CL3361 95B 10G24 5404LN

F109-1 Dormitory T511 - 93KAB CL3351 95AB - -

F81-1 Entry/Office T521 H11 93KAB - 95A 10G05 5407LN

F84-1 Classroom T561 H17 93KR CL3355 95S 10G37 5408LN

F90-1 Dormitory T571 H19 93KT - 95T 10G54 5422LN

F86-1 Storeroom T581 H12 93KD CL3357 95F 10G04 5405LN

Storeroom-Fail Safe T851 - 93DEL - 95FEL 10G70 -

Storeroom-Fail Secure T881 - 93DEU - 95FEU 10G71 -

Dummy-Single T12 H08 1DT CL3350 95DO 10U94 455LN

Falcon ArrowCorbin/Best

Russwin Marks Sargent Yale

Dane SR 15D or L NZD 195/195R LL AU

Quantum - 14D or L PZD 295/295R LP PB

Avalon - 16D or L AZD - LB MO

All effort has been made to make this information comprehensive. Since no two products are exactly alike, this data represents those products which are similar. This information was obtained from trade services and is not guaranteed nor meant to represent any product as equal to any other product.

T S E R I E SC O N V E R S I O N C H A RT

13

Trim Styles

14

T S E R I E SLO C K F E AT U R E S A N D S P E C I F I C AT I O N S

Lock FeaturesDoor Thickness: 1-3/4” to 2-1/8” standard. Thin door adapter kit (A30775-000-00) available for doors thinner than 1-3/4”, please specify door thickness.Backset: 2-3/4” standard. 2-3/8” also available. Link (A22161-005-10) available for 5” backset.Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel. Attachment: Lock chassis secured to door by threaded mounting nuts. Completely preassembled outer trim and inner spindle assembly are through-bolted over chassis using (2) 10-32 screws. Adding rose and lever to inner spindle assembly completes installation.Handing: Locks are non-handed.Cylinders: Drilled with 6-pin chambers, pinned in 5. Pinning in 6 chambers available when specified, at no cost. 7-pin cylinders also available. Cylinder assemblies removable to rekey. Also available with 6 or 7-pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard. Interchangeable core design is available for small format (SFIC) and large format for most manufacturers, see page 8.

Falcon Lock T Series SpecificationsKey-in-lever cylindrical locksets shall be Falcon Lock T Series or equal and meet the following requirements:• All locks shall meet the new ANSI/BHMA A156.2, Series 4000,

Grade 1 for key-in-lever locksets.• Locksets shall be UL Listed (3 hour A Label).• Locksets shall be provided standard with Pressure Release™

feature. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.

• Lever trim shall have individual heavy-duty compression springs behind rose for lever return and to prevent lever sag. Trim shall be through-bolted with two (2) 10-32 screws coated with thread sealant to provide strength and resistance to loosening. Inner

Elevation Standard StrikeDoor Edge

Keyways: “G” keyway standard on conventional cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways.Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted through door. Levers are pressure cast (solid levers–no inserts) material finished to match mating parts. Latches: 9/16” bolt projection, UL listed with latch faceplates 2-1/4” x 1-1/8” with square corners standard. 3/4” projection, UL listed latch with 2-3/4” backset also available. Adjustable front standard. See page 10 for optional latches.Strikes: 4-7/8” x 1-1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Consult page 11 for other available strike sizes and configurations.Screws: Furnished with combination screws for use in wood or metal doors and frames.Electrified Functions: Available in 24 VDC .185 AMP.ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.UL: 3 hour A label.

and outer trim shall “bottom out” to prevent door collapse. Roses shall be minimum of 3-1/2” diameter.

• All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by Allen-head set screw to prevent tampering or vandalism.• Locksets shall adjust to fit door thickness from 1-3/4” to 2-

1/8”.• All locksets shall be non-handed and not require field

disassembly for re-handing.• Preparation for door must be non-handed.Acceptable manufacturer: FALCON LOCK

2-3/8”, 2-3/4”5/32”5/16” Dia. thru hole

2-3/4”

5/32” x 1/8” Deep

2-25/32”2-1/8” Dia. 1-1/8”

1-1/8”

2-1/4”

1” Dia. 3/4”

3-3/8”

4-7/8”

1-1/4”

5/16”

3-1/2”

4-1/8”

3/8”9/16”

1-1/16”

CL door, lock & strike are common

Backset (from center of door for beveled stile)

How to OrderFor correct ordering, and to ensure no delays in shipment of your order, the following descriptive data must be listed in the sequence shown. Necessary information can be found in other parts of this catalog. The example below shows an order for 12 each T locksets in the 571 Dormitory function, D (Dane) trim design in a 626 (satin chrome) finish, with 2-3/4” backset latch, to accommodate doors 1-3/4” thick.

Quantity: Indicate the quantity required.

Catalog Number: Select function number, cylinder type, and latch style from tables in this section.

Trim Design: Indicate letter of lever design required. Example: AVA=Avalon; DAN=Dane; QUA=Quantum.

Finish: When the finish is the same for the outside and inside trim, it is shown once (626). For split finishes, the outside is designated first, then the inside (605 x 625).

Latches: 2-3/4” backset is standard. Adjustable front standard. A Grade 2 latch with a 1” faceplate in 2-3/8” and 2-3/4” backset

FinishesThe latest in modern techniques and equipment are used to apply the highest quality finish. Extra steps assure durable, consistent finishes and long useful life.

Although we apply the finest available protective plating and/or enamel coating to the surface of our products, these finishes have limitations and in time may deteriorate either from exposure to weather, pollution, perspiration, extremes of climate, frequency of

Trim Finishes Chart

Description ANSI No. Available on

Bright Brass 605 All Trim

Satin Brass 606 All Trim

Satin Bronze 612 All Trim

Satin Bronze Oil Rubbed 613 All Trim

Bright Chrome 625 All Trim

Satin Chrome 626 All Trim

also available. See page 10. All latches are UL listed 3 Hour.

Strikes: 4-7/8” x 1-1/4” ANSI standard. Optional T-Strike or Full Lip strike available. See page 11.

Cylinder Type: 6 pin is standard. For 7-pin add PD7 to product catalog numbers (eg. T501PD7 QUA).

Keying Detail: We suggest using the standard terms developed by DHI (Door and Hardware Institute) or ALOA (Associated Locksmiths of America Inc.)

Example: AA1 - Grand Master keyed, Master keyed, change key 1.

Interchangeable Core: Interchangeable core: To order product capable of accepting an interchangeable core, add suffices from the keying table to the function number, preceding the latch style. Example: T511JD will be supplied with a FSIC prepped lever to accept a competitor full size interchangeable core.

Keyways: “G” is standard on regular cylinders, “A” is standard on interchangeable cores. Other keyways available. See current pricebook.

use or other factors. Deterioration of these finishes is, therefore, not a defect, but a normal process which is unavoidable. Our company cannot accept responsibility for finish deterioration in these circumstances; therefore, the finishes cannot be guaranteed. These products will not be refinished or replaced under our warranty should deterioration of finishes occur.

How to Order Example

T S E R I E SG E N E R A L I N F O R M AT I O N

Line Item Qty. Product Outside Inside Hand Latch StrikeDoor Thickness

Ext. DIM Additional Details/Keying

DES FIN DES FIN

1 20 T571JD DAN 626 98535 5164 1-3/4” With 012191-003-70 dust box. FSIC prep IC-YA6

15

Ingersoll Rand’s Security Technologies Sector is a leading global provider of products and services that make environments

safe, secure and productive. The sector’s market-leading products include electronic and biometric access-control systems;

time-and-attendance and personnel scheduling systems; mechanical locks; portable security; door closers, exit devices,

architectural hardware, and steel doors and frames; and other technologies and services for global security markets.

800-266-4456 www.falcon.ingersollrand.com www.ingersollrand.com

©2007 Ingersoll Rand Company Limited FA-5161 Rev. 06-07