B2

B1

A

AMPLIFICATION SPEAKERSSOURCES

B3

B30

E

D

inputoutput

C

F F F

F F F

SYSTEMS FOR MEETINGS AND BOARD ROOMS

he extreme simplicity ofinstallation and use makesthe DI.CO 40 system ideal

for both temporary and perma-nent installations in small boardrooms. The basic components ofthe system are the DI.CO/40 am-plifier and the BM 3042 and BM3043 microphone stands with bu-ilt-in loudspeaker. The DI.CO/40amplifier, equipped with a specialmicrophone preamplifier, can beconnected to a maximum of 30microphone stands in cascade.The BM 3042 is used for thechairman’s position and has twopushbuttons: one for latching mi-crophone activation in mixed mo-de with the BM 3043 stands, andthe other for momentary mi-crophone activation with priorityover the BM 3043 stands. TheBM 3043 microphone stand isused for the participants and hasonly the button for latching mi-crophone activation in mixed mo-de with the other stands of thesystem.

Congress

T

4

A — BM 3042Chairman’s microphone stand

B — BM 3043 (B1-B30)Participant’s microphone stand

C — DI.CO/40 AmplifierD — Amplifier (AM 4000 series)

for audience area speakers

E — Recorder (optional)F — Speakers for the audience area

(see pages 11-13)

DI.CO/40

BM 3042

BM 3043

DI.CO. 40

DI.CO/40• DESK IN input for connecting up to

30 BM 3042/BM 3043 microphonestands in series.

• Input for auxiliary microphone withpriority status.

• Auxiliary output for recording theconference proceedings.

• Outputs for constant impedance andconstant voltage speakers.

• Independent treble and basscontrols.

• PA/HF filter.• Final stages automatically protected

against overload and short circuits.• Emergency power supply by means

of 12 V battery.

Congress

Sound system for conference rooms with reinforcementspeakers for the audience area.

Compact system for meetings in small conference rooms

BM 3042BM 3043Microphone stands used for thechairman (BM 3042) and participants(BM 3043) in the DI.CO/40 compactconference system.• Microphone with high sensitivity and

extended frequency response.• TALK button for latched activation

of the microphone in mixed modewith the other stands in the system.

• PRIORITY button on the BM 3042stand for momentary activation ofthe microphone with exclusion ofany active BM 3043 stands.

• Built-in monitor speaker.• 300 mm gooseneck, black

chromium-plated to resist scratchingand eliminate undesired reflections.

• Base in plastic which is particularlyresistant to shock and handling.

• 2-metre connection cable with 7-pinDIN plug.

5

EXTREME SIMPLICITY OF INSTALLATION AND USEMAKE THE DI.CO/40 SYSTEM IDEAL FOR CREATING

BOTH TEMPORARY AND PERMANENT INSTALLATIONSIN SMALL CONFERENCE ROOMS.

SC 5500 • SC 5500/V

BM 5052

CG 5010

SYSTEMS FOR CONFERENCES AND VOTING

Congress

he SC 5500 conferencesystem is designed formanaging the various

speeches made in conferenceand convention settings. The sy-stem also includes a “Voting” fun-ction (available using the BM5 0 5 1 - V a n d B M 5 0 5 2 - Vmicrophone stands) which provi-des a fast and simple means ofvoting on any issue being discus-sed. A universal input for audiosources such as auxiliary mi-

BM 5051Microphone standThe BM 5051 stand is used for theconference participants. The standhas a built-in loudspeaker whichmakes it easier to hear the speechesof the other conference participants,but which is excluded when thatmicrophone is activated. The LED ringaround the microphone unit lights upwhen the microphone is activated, sothat all the conference participantscan see who is speaking.

BM 5052Microphone standThe BM 5052 stand is used for theconference chairman. The stand hasa built-in loudspeaker which makes iteasier to hear the speeches of theother conference participants. Theloudspeaker is excluded when thechairman’s microphone is activated.The LED ring around the microphoneunit lights up when the chairman’smicrophone is activated, so that allthe participants can see when thechairman is speaking.

T

BM 5051BM 5051 BM 5051

6

crophones or wireless micropho-nes, etc., can operate in mixedmode with the participants' andchairman's microphone stands.This makes it possible for per-sons in the audience to speak,as well as for voice messages tobe transmitted within the systemby the secretary or participants.The system features four differentoperating modes:• Conference• Automatic conference

• Free discussion• VotingThe SC 5500 system can also behandled by a personal computerwith the aid of a simple program-me operating in WINDOWS whichis provided with the system. CG 5010

Control unitThe microprocessor incorporated inthe console is the heart of the SC5500 system, as it continuouslycontrols the status of all themicrophone stands and maintains amemory of the queue of speakers, upto a maximum of 20 bookings.The messages which appear on theconsole display can be shown in 5different languages: Italian, English,French, German, and Spanish.The CG 5010 is equipped with:• a back-lighted alphanumerical liquid

crystal display for keeping a checkon the system functions even in low-light situations;

• a numerical keypad with fourfunction keys used for setting oneof the four system operating modes.

BM 5052

BM 5051

F F

UP 4161

AMPLIFICATION SPEAKERSSOURCES

B

B

B

B

B

B

B

B

B

B

B

B

RX 451HDF F

input

output

UR 5060

Congress

also enables a number of personalizedfunctions, such as the association ofa name or abbreviation to eachparticipant, or storage of the votingresults in a file or on a printout. Whenthe computer is used, it is also possibleto have the results stored in a file inopen mode voting. The programme isprovided complete with the interfacefor controlling the TB 5000 displayboard. When a printer is available andthe system is in CONFERENCE mode,

UR 5060Receiver unitIn addition to providing the powersupply to the entire system, the UR5060 receiver unit picks up the audiosignals coming from the microphonestands, amplifies them and sendsthem to the loudspeakers on thestands.The UR 5060 is also equipped with:• a balanced audio output for an

amplifier used for the common areas• an unbalanced audio output for a

cassette recorder• monitor speaker with respective

volume control knob• headphone jack that functions in

alternative to the monitor speaker• volume control for adjusting the level

of the signal sent to the microphonestand loudspeakers

• LED VU-meter for checking thevolume level

• input for cassette recorder.

US 5020Adder unitThis unit powers the microphonestands and makes it possible to reachthe maximum capacity of the system(64 microphone stands). The adderunit can be necessary when there aremore than 16 stands in the system,or when the cables that connect thestands are of considerable length.

Software supportAll the system functions can becontrolled by a special softwareprogramme which operates inWINDOWS.This easy-to-use programmereproduces all the controls andfunctions of the central console, and

a printout can be made of the durationof each speech. In VOTING mode, apersonalized voting report can beprinted out including the subject ofthe vote and any comments. For openvoting, the report also contains thenames of the voters divided accordingto the preferences expressed.

TB 5000

7

THE SC 5500 IS DESIGNED FOR EFFICIENTHANDLING OF THE SPEECHES OF UP TO 63 PARTICIPANTS

PLUS THE CHAIRMAN IN CONFERENCESAND CONVENTIONS.

BM 5051-VBM 5052-VMicrophone standsThese stands are used as theparticipant’s and chairman’s positions,respectively, and have the samefunctions as the BM 5051 and BM5052 with the addition of pushbuttonswhich are used for expressingpreferences when the system is usedin Voting mode.

TB 5000Lighted display boardThe TB 5000 board can be used fordisplaying the following information:• voting results• the name (or associated number)

of the participant enabled to speak• the type of voting (open or secret

ballot)• the list of bookings in

CONFERENCE and AUTOMATICCONFERENCE modes

• The TB 5000 can be connected tothe serial port of a personalcomputer and controlled by theprogramme supplied with thesystem.

BM 5052-V

BM 5051-V

THESYS 1000

he THESYS 1000 simulta-neous interpreting systemcompletes RCF ’s wide

range of components and sy-stems for congress centres andconference rooms. Thanks to in-frared transmission and the par-ticular system components, THE-SYS 1000 is extremely simple touse. The system includes up to12 transmission channels and en-sures that all the conference pro-ceedings remain strictly reserved,as it is virtually impossible for thetranslation to be picked up outsi-de the room in which the systemis being used. The high degreeof flexibility in accepting differentinput levels ensures easy con-nection to other equipment suchas preamplifiers, microphones,and conference audio systems.

the speaker and any of the translationchannels. The system includes arange of controls and LED indicators(in compliance with ISO standards)and can be connected to an IX 1070intercom system.

Congress

TR 1000/8TR 1000/12Modular infrared transmitterTwo models available (max. 8 or max.12 channel boards).The modular transmitter is equippedwith 8 or 12 slots for installing the CB1010 channel boards, one for eachlanguage plus one for the originallanguage being transmitted in theroom.The boards are inserted from the frontof the unit and have a universal formatwhich makes them interchangeable.The channels are differentiated by theposition of the boards.

ID 10066 channelsID 101212 channelsMultichannel console forinterpretersAvailable in versions with 6 or 12channels. Because the interpreter’sconsole is subject to a high level ofinteraction with the operator, the ID1006 and 1012 have been designedand constructed according to themost advanced standards ofergonomics and functionality. Theconsole is equipped with headphonejacks for two interpreters working inalternating shifts, plus an addedposition for listening only.Each interpreter can select his/herown input channel, choosing between

SIMULTANEOUS INTERPRETING SYSTEMS

T

Schema a blocchi per Thesys 1000 a 6 o 12 canali

TR 1000/8TR 1000/12

8

AMPLIFICATION SPEAKERSSOURCES

TX 451HR

LX 451HD

HC 2000

MIXER

PA 281

RR 1080

PA 281

TR 1000

MD 7400

MD 7400

inputoutput

RR 1080

AUDIENCE AREA

ID 1006ID 10012

IH 1080Headphones with microphone forinterpreters.

SP 1081Earpiece covers for RH 1080. Set of100 spares.

IH 1080

ID 1006ID 1012

ID 1006ID 1012

ID 1006ID 1012

Congress

LR 1000Multichannel infrared receiverReceiver for simultaneous interpretingsystems with infrared transmission.The LR 1000 has an attractive designand is easy to use, fitting easily intoa jacket pocket. The infrared signaloffers the user complete freedom ofmovement within the conference area.The receiver is equipped with on/offswitch, potentiometer, channelselector, headphone jack,connector for batteryrecharge, powerON LED, and clipfor belt attachment..

IX 1070Intercom system for communicationbetween the operator and theinterpreters. The system enables two-way communication between theinterpreters and the conferencesecretary’s booth. The control boardcan be interconnected with thegeneral amplification system. A built-in loudspeaker makes it possible forthe operator to monitor the incomingmessages, and each call transmittedto the control board is sent directly tothe loudspeaker and indicated by aLED. The operator can send amessage to each interpreter’s consoleby simply pressing one of the 15buttons on the front panel, at whichthe respective INTERCOM LEDindicator on the interpreters’ panellights up.The device also has a special circuitfor protection against feedback.

RR 1080Infrared transmitterEquipped with 238 transmissiondiodes and three LEDs for failure,stand-by, and normal operation.Thanks to its compact size, the RR1080 is easy to integrate in any space.A specially designed system ensurescoverage of the entire conference areawithout signal drop-out zones. Thenumber and location of thetransmitters to be used depends onthe size and structural characteristicsof the area to be covered.

PC 1092/6Rack panel for remote control of theLD 1090/6.

RH 1080Stethoscopic headphones withmagnetic transducersincorporated andreplaceable rubberearpiece covers.

RH 1084Single earphone. Ergonomic andcomfortable design. Ultra-light (only23 g including cable and plug).Complete with dynamic loudspeaker.

LD 1090/6Language display board for 6channelsDisplays the languages beingtranslated with the respectivetransmission channels. Includes sixpanels with attachment supports, eachpanel indicating the correspondinglanguage with LED display. Metallicfinish.

FC 1091/6Floor stand for LD 1090/6Ideal for mobile installations, this standfor the LD 1090/6 includes a powersupplier and six switches (one foreach language). Equipped withwheels to facilitate transport.

BR 1050Case for carrying and rechargingfifty LR 1000 receiversA portable container which holds upto 50 LR 1000 receivers, equippedwith timed circuit for batterycharging/discharging whichautomatically adapts to the voltageused for charging and maintenance.

RR 1080

FC 1091/6

RH 1080

BR 1050

LR 1000

RH 1084

LD 1090/6

9

THE THESYS 1000 SIMULTANEOUS INTERPRETING SYSTEMWITH INFRARED TRANSMISSION HANDLES

UP TO A MAXIMUM OF 12 CHANNELS(NUMBER OF LANGUAGES TRANSLATED).

AUDIO SYSTEMS FOR CONGRESS AND MULTIPURPOSE HALLS

Congress

10

TX 451 HRTX 450 hand-held transmitter with RX400 rack receiver.

LX 451 HRLX 450 portable transmitter with RX400 rack receiver.

ML 400Clip-on microphoneExtremely sensitive electret clip-onmicrophone with 3.5 mm gold-platedjack and attachment clamp.

LX 400Portable transmitter• Input for dynamic microphones and

for electret microphones (with powersupply up to 5 V).

• Continuous input regulator foroptimal modulation.

• The input stage is designed toensure the best transmission ofspeech and singing.

• Advanced construction with SMDtechnology.

• Reduced current consumption andtherefore longer operating time.

• Highly flexible wire antenna resistantto breakage.

TX 450

TX 451 HR

RX 400 RX 400

ML 400

LX 451 HD

LX 450

RX 400Rack receiver• Multiple operation with simultaneous

channels (up to 8 channels).• Two BNC antenna sockets, on the

front and rear panels, to use asdesired.

• Solid metal body.• Two VH 502 steel wire antennas.

n this type of application,the high power of theamplification system re-

quires the use of professionalcomponents, particularly for thefinal power stages and the spe-akers. The Vision Series speakershave been specifically designedfor use in permanent installations,and offer a wide range of acces-sories for attachment and fittingin any position. The high qualityof the sound reproduced by theVision speakers can be furtherenhanced by using the DP 260processor which adapts speakerperformance to the particularcharacteristics of the space.

MD 7400

Diagram for congress and multipurpose halls

AMPLIFICATION SPEAKERSSOURCES

MD 7400

TX 451HR

LX 451HR

HC 2000

MIXER

inputoutput

PA 281 PA 281

PA 281 PA 281

I

LX 451HR

DCA 1050

Congress

11

DCA 550DCA 1050Professional stereo amplifiers• MOSFET power circuitry• High efficiency cooling• Thermal protection, DC, RFI (Low

Impedance)• Soft Clip Limiter• Soft Start• Speakon power outputs

HC-2000High current seriesProfessional stereo amplifier.• High Current circuitry• Possibility to drive on 2 W load• Soft Clip Limiter• 4 kVA toroidal transformer• Maximum peak-peak output voltage:

90 V

HC 3200High current seriesProfessional stereo amplifier• High Current circuitry• Possibility to drive on 2 W load• Soft Clip Limiter• 7.5 kVA toroidal transformer• Maximum peak-peak output voltage:

120 V

PL 81/ASpeaker for flush-mounting in falseceilings.The speaker support ring and the qui-ck bayonet hooking system make in-stallation fast and easy.Body in self-extinguishing plastic.

VISION SERIESThe Vision Series is a line of speakersfeaturing high intelligibility, specificallydesigned for use in permanentinstallations. With five bass reflexspeakers plus a subwoofer, the lineis completed by the DP 260 digitalprocessor.The five 2-way full range speakers(PA 261, PA 281, PA 121, PA 151, PA152) feature crossover networks andtransducers specially designed toguarantee the highest intelligibility.This is an essential characteristic forinstallations which require precise

reproduction of music and speech inlarge enclosed spaces, andparticularly in those with difficultacoustics.For specific applications, the DP 260processor can be used for improving

DP 260

the frequency response by means ofa complete range of pre-programmedconfigurations. The DP 260incorporates a sophisticated crossoverwith fine delay regulation, a parametricequalizer, and a limiter section that isprogrammable for each band.The Vision Series speaker cabinetsare made of painted multilayer birchwood. All the speakers in the seriescan be easily suspended using theM10 threaded inserts.

PL 81/A

CONGRESS AND MULTIPURPOSE HALLS,GIVEN THEIR PARTICULAR CHARACTERISTICS,

REQUIRE HIGH QUALITY SYSTEMS FOR BOTH SPEECHAND MUSIC REPRODUCTION.

BM 4072Microphone stand designed for usewith the 4000 series amplifiers. Equip-ped with a high directivity condensermicrophone and two pushbuttons, onefor latching microphone activation andone for momentary activation..MD 7400Professional dynamic microphone,unidirectional with anti-noise suspen-sion. Equipped with neodymium cap-sule. Low sensitivity to feedback.

TX 450Hand-held transmitter• Minimum continuous operation: 10

hours with standard 9V alkaline bat-tery.

• LED indicator flashes when batterieshave reached the minimum charge.The transmitter functions for 30minutes more and then goes intomuting status.

• Antenna integrated in themicrophone unit.

DX 400Table-top receiver• Secure reception thanks to diversity

system technology.• LED indication of the A/B diversity

channel active.• The Mute LED indicates when the

receiver is silent.

TX 451 HDLX 451 HDThese wireless microphones, availablein both hand-held and clip-on ver-sions, are very easy to install. Themodels to be used can be chosenfrom among 13 frequencies.

ML 400CLip-on microphone• Extremely sensitive electret clip-on

microphone with 3.5 mm gold-platedjack and attachment clamp.

LX 450Portable transmitter• Input for dynamic microphones and

for electret microphones (with powersupply up to 5 V).

• Continuous input regulator for opti-mal modulation.

• The input stage is designed to en-sure the best transmission of speechand singing.

• Advanced construction with SMDtechnology.

• Reduced current consumption andtherefore longer operating time.

• Highly flexible wire antenna resistantto breakage.

MT 3100Omnidirectional microphone designedfor a wide variety of applications, in-cluding meetings, conferences, roundtable discussions, and video confe-rences.

Congress

AM 4120

MR 4/T MR 4/T

MR 4/T MR 4/T

MD 7400 orwireless microphone

Diagram for conference and meeting rooms

AMPLIFICATION SPEAKERSSOURCES

inputoutput

VOICE REINFORCEMENT SYSTEMS FOR MEETING AND CONFERENCE ROOMS

hen designing an amplification system for a conference ormeeting room, particular consideration should be given to re-sponding to all the acoustic, aesthetic, and environmental needs

of the specific user. Microphones proposed in various types, as wellas different types of speakers, make it possible to assemble systemstailored to the specific characteristics of each room. The know-howof RCF’s systems engineers guarantees the best technical solutionsfor optimum system operation.

W

12

MD 7400

BM 4072

BM 4072

BM 4072

MT 3100

ML 400

TX 451 HD LX 451 HD

TX 450

DX 400 DX 400

LX 450

AM 4060AM 4120AM 4160Integrated amplifiers with powers from60W to 160W. Equipped with XLRinputs and RCA stereo inputs. Com-plete with all the functions for incomingand outgoing signal control. Powersupply in alternating current at115/230 Vac and direct current at 24Vdc.

CS 2020Sound column incorporating 7extended range loudspeakers. Bodyin extruded aluminium. Equipped withswitch for adjusting the sound powerdelivered.

MR 4/T(black)MR 4W/T(white)High quality constant directivity spe-aker. Can be easily fitted on the wallor ceiling thanks to the wide range ofinstallation accessories.

Congress

CS 2020

AM 4060

BM 4072

MR 4W/T

MR 4/T

AM 4160

13

THE RCF VOICE REINFORCEMENT SYSTEMS ARE DESIGNEDUSING A WIDE RANGE OF COMPONENTS,

ALL PERFECTLY SUITABLE TO SATISFY THE NEEDFOR HIGH QUALITY COMMUNICATION.

PL 80/ASpeaker for flush-mounting in falseceilings.The speaker support ring and the qui-ck bayonet hooking system make in-stallation fast and easy.Body in self-extinguishing plastic.

PL 80/A