System 5600 2 1 2 Curtain Wall Thermally Improved System 250.pdf · series 5600 outside glazed...
Transcript of System 5600 2 1 2 Curtain Wall Thermally Improved System 250.pdf · series 5600 outside glazed...
Thermal Isolator used between exterior and interior extrusions
Improved thermal performance
Various mullion depths Provides design flexibilityWide variety of snap-on face covers Customize projects with face covers of various
depths and profilesOptional corner mullions Allows 90° inside and outside cornersConcealed shear block construction Ability to erect on the job siteConcealed vents Ability to include ventilation while maintaining the
exterior sight lineIntegral door adaptors Compatible with all 1 3⁄4" and 2" EFCO entrancesAccommodates up to 1 1⁄4" glazing Expands design and energy saving optionsAccessory line of perimeter anchors, pocket fillers, door adaptors, etc.
Increased product versatility
Anodized and painted finishes available Multiple options to answer economic and aesthetic concerns
Roll-On Horizontals Concealed fasteners, reduced installation labor
Features Benefits
System 56002 1⁄2” Curtain Wall Thermally Improved System
© Copyright 2015 EFCO Corporation 05/16 1000 COUNTY RD • MONETT, MO 65708 • 800.221.4169 • efcocorp.com
CONFIGURATIONS Outside Glazed • 2 or 4-sided Structural GlazedEFCO 2 1/2” system 5600 provides a monumental sight line and is available in a wide range of mullion and face cover depths. The 2 1/2” 5600 pressure wall has roll-on horizontals and concealed fasteners for a smooth uninterrupted joinery. Also Available for enhanced thermal performance and fewer installation steps is the Duracast® pressure plate, made of Pella’s patented fiberglass pultrusion.
SERIES 5600 OUTSIDE GLAZED CURTAIN WALLAIR INFILTRATION ...........................................................<.06 CFM/SF @ 6.24 PSFWATER ..................................................................................NO LEAKAGE >15.0 PSFSTRUCTURAL .............................................visit MyEFCO at www.efcocorp.com
SERIES 5600 CONCEALED VENTAIR INFILTRATION ...........................................................<.30 CFM/SF @ 6.24 PSFWATER ..................................................................................NO LEAKAGE >15.0 PSFSTRUCTURAL .............................................visit MyEFCO at www.efcocorp.com
*EFCO CERTIFIES SERIES 5600 2, 2 1/4, 2 1/2, 3, 4, 5, AND 6" WIDE SYSTEMS MEET THE ABOVE AIR (ASTM E 283) AND WATER (ASTM E 331) PERFORMANCE. CONTACT EFCO FOR MORE INFORMATION.
FACE COVERS
*-Obscure glass thickness**-Laminated glass thickness
A -Available Glazing OptionC -Custom pressure plate, adaptor and/or gasket requiredBlank - N/A
INTEGRAL S-5600GLAZING CHART
POLYCARBONATE GLASS OR PANEL1/8" 3/16" 1/4" 1/8" .156"* 3/16" .200"* 1/4" 1/4"** 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4"
OUTSIDEGLAZED
MONOLITHIC GLASS C C A C C C C A A A C C C
INSULATED GLASS A C A
STRUCTURALGLAZED
MONOLITHIC GLASS A A A A
INSULATED GLASS A A
A -Available System DepthBlank - N/AAVAILABLE SYSTEM
DEPTHSSYSTEM DEPTH
2-1/2” 3” 3-7/8” 4-1/2” 6 7-1/4” 7-1/2” 8” 10-1/4”OUTSIDE GLAZED A A A A A A A A A2- AND 4-SIDED STRUCTURAL GLAZED A A A A A
Note: All performance value data is based on laboratory testing per AAMA 101/I.S.2/A440 for Air/Water/Structural, ASTM E90 and or E413 for Acoustical, AAMA 507 and or NFRC 100/200/500 for UFactors and AAMA 1503 for Condensation Resistance Factor (CRF). Printed values are subject to change pending the frequency of recertification testing. Field results will vary depending on size, the field test method, the addition of sub-frames, panning, mullions, accessories and installation into the surrounding condition.
PERFORMANCE DATA
System 56002 1⁄2” Curtain Wall Thermally Improved System
1000 COUNTY RD • MONETT, MO 65708 • 800.221.4169 • efcocorp.com© Copyright 2015 EFCO Corporation 05/16
Illustration 2
Main Frame ConstructionSystem 5600 curtain wall has various system depths. Sight lines are nominally 2 1/2” and present a clean, attractive appearance. Members are extruded from 6063-T6 aluminum alloy, and the nominal material wall thickness is .093” to .125”. Joint construction utilizes the shear block method. See Illustration 1.
Concealed Vent ConstructionSystem 5600 curtain wall has optional concealed vents that utilize screw spline construction.
Thermal BarrierSystem 5600 curtain wall members are thermally improved using vinyl gasket to isolate exterior and interior extrusions.
Sunshade InformationSystem 5600 curtain wall has optional sunshades available in five standard depths. Sunshade blades available in various sizes. Members are extruded from 6063-T6 aluminum alloy. Sunshade clips and arms are fabricated on a CNC machine. Joint construction utilizes screw spline construction. *Note: Structural design loads will determine the sunshade depth and clip spacing limitations.
GlazingSystem 5600 curtain wall can be glazed from the interior or the exterior. It is “dry glazed” with preset and drive-in EPDM gasket. Series 5600 accommodates 1/4” to 1 1/4” infill panels. Dual glazing is available with internal blinds.
System 56002 1⁄2” Curtain Wall Thermally Improved System
Illustration 1
1000 COUNTY RD • MONETT, MO 65708 • 800.221.4169 • efcocorp.com© Copyright 2015 EFCO Corporation 05/16