Synthetic Thickener for Reactive & Disperse Dyes Printing - Reanol RDTC brochure.pdf · for...
2
PRODUCTION: Advanced Chemical Technology (FZE), Sharjah Airport Free Zone, UAE. P.O.Box: 122415 Tel: +971 (0) 6 557 9890 Fax: +971 (0) 6 557 9891 Website: http://www.actt-uae.com E-mail: [email protected] Technical Bulletin For Textile Industry REANOL RDTC Is the new generation of high concentrated synthetic thickener for printing with reactive an disperse dyes on cotton, viscose , rayon and all synthetic textiles. PERFORMANCES Reanol RDTC is extremely cost effective. Highly economical in use. With Minimum inventory requirement because of its very high solid contents. Reanol RDTC is extremely easy to use. It instantly modifies rheology and viscosity of printing paste . Printing pastes prepared with Reanol RDTC is unaffected by bacterial attack and will have far superior shelf lives than any natural thickeners. Reanol RDTC can be printed over a wide viscosity range whilst still maintaining excellent definition, coverage and color yield compared with sodium alginate. Reanol RDTC can be printed with less bled pressure or smaller magnet bar than would be used with alginate paste of the same viscosity, allowing finer definition and printing 3-4 times higher speed than normally be possible with alginate on rotary machines. Reanol RDTC gives consistently superior color yield and coverage it shows 20-25% improved color yield on most shades and up to 40% with Turquoise on viscose. Reanol RDTC is compatible with all classes of dyes and natural thickeners except cationic dyes and thickeners. Advanced Chemical Technology FZE REANOL RDTC Synthetic Thickener for Reactive & Disperse Dyes Printing Urea 10 - 20 % Alkali 2 - 2.5 % Oxidizing Agent 1 % Reanol RDTC 5.0 - 5.5 % Water Up to 100 % PASTE RECIPE * 10% of Urea is recommended for cotton and 20% in rayon Applications. * In most cases 2% of Alkali Sodium carbonate, Sodium bicarbonate, or Potassium carbonate) is sufficient. APPLICATION REACTIVE DYES First, the recommended ancillary ingredients are dissolved in the water, then the recommended dosage of Reanol RDTC is added. Print paste can be mixed right after stock make-up. Complete hydration is occurs immediately, far different from alginates which take up to 24 hours. Hard water may influence the soft handle, the additional use of Scirasperse AD or any complexing agent and addition of natural thickener ex: Alginate is recommended, for extreme cases, to improve wash ability and electrolyte stability. WASHING OFF - Rinse in cold water (Max 30) with overflow and/or Spray, we suggest addition of 2 g/l of Scirasperse AD or complexing agent. - Warm rinse at 50-60 C - Wash at 90-100 C with Flosperse DT or complexing agent hot rinse at 60
Transcript of Synthetic Thickener for Reactive & Disperse Dyes Printing - Reanol RDTC brochure.pdf · for...
PRODUCTION: Advanced Chemical Technology (FZE), Sharjah Airport Free Zone, UAE. P.O.Box: 122415 Tel: +971 (0) 6 557 9890 Fax: +971 (0) 6 557 9891 Website: http://www.actt-uae.com E-mail: [email protected]
Techn
ical B
ulleti
n
For Textile Industry
REANOL RDTCIs the new generation of high concentrated synthetic thickener for printing with reactive an disperse dyes on cotton, viscose , rayon and all synthetic textiles.
PERFORMANCESReanol RDTC is extremely cost effective. Highly economical in use. With Minimum inventory requirement because of its very high solid contents.
Reanol RDTC is extremely easy to use. It instantly modifies rheology and viscosity of printing paste . Printing pastes prepared with Reanol RDTC is unaffected by bacterial attack and will have far superior shelf lives than any natural thickeners.
Reanol RDTC can be printed over a wide viscosity range whilst still maintaining excellent definition, coverage and color yield compared with sodium alginate.
Reanol RDTC can be printed with less bled pressure or smaller magnet bar than would be used with alginate paste of the same viscosity, allowing finer definition and printing 3-4 times higher speed than normally be possible with alginate on rotary machines.
Reanol RDTC gives consistently superior color yield and coverage it shows 20-25% improved color yield on most shades and up to 40% with Turquoise on viscose.
Reanol RDTC is compatible with all classes of dyes and natural thickeners except cationic dyes and thickeners.
Advanced Chemical Technology FZE
REANOL RDTCSynthetic Thickener for Reactive & Disperse Dyes Printing
Urea 10 - 20 %
Alkali 2 - 2.5 %
Oxidizing Agent 1 %
Reanol RDTC 5.0 - 5.5 %
Water Up to 100 %
PASTE RECIPE
* 10% of Urea is recommended for cotton and 20% in rayon Applications. * In most cases 2% of Alkali Sodium carbonate, Sodium bicarbonate, or Potassium carbonate) is sufficient.
APPLICATIONREACTIVE DYESFirst, the recommended ancillary ingredients are dissolved in the water, then the recommended dosage of Reanol RDTC is added. Print paste can be mixed right after stock make-up. Complete hydration is occurs immediately, far different from alginates which take up to 24 hours.Hard water may influence the soft handle, the additional use of Scirasperse AD or any complexing agent and addition of natural thickener ex: Alginate is recommended, for extreme cases, to improve wash ability and electrolyte stability.
WASHING OFF- Rinse in cold water (Max 30) with overflow and/or Spray, we suggest addition of 2 g/l of Scirasperse AD or complexing agent.
- Warm rinse at 50-60 C
- Wash at 90-100 C with Flosperse DT or complexing agent hot rinse at 60
Advanced Chemical Technology FZE
PASTE PREPARATION
Reanol RDTC
WASHING OFF PROCEDURE
Reanol RDTC
PACKAGINGReanol RDTC
Y WaterX Water
Reanol RDTC Natural �ickener
40 - 5010 - 2053
Sodium alginate *Starch étherAcid / Acid donor (e.g. citric acid)Oxidising Agent (e.g. sodium chlorate)
Fixation Accelerator
1000
1000
25 - 45 Reanol RDTC
g/kgg/kg
0 - 20
DISPERSE DYESReanol RDTC:
PRODUCTION: Advanced Chemical Technology (FZE), Sharjah Airport Free Zone, UAE. P.O.Box: 122415 Tel: +971 (0) 6 557 9890 Fax: +971 (0) 6 557 9891 Website: http://www.actt-uae.com E-mail: [email protected]
