Synopsis
description
Transcript of Synopsis
ROADMAP TO POWER GENERATION BY SHOCK ABSORBTION
Submitted By:1. Mr. Deepak Pandey2. Mr. Alok Dubey 3. Mrs. Suman Chaudhari4. Mr. Abhishek Dubey5. Mr. Shashank Singh
Under The Guidance of Prof. Nagarjun Sir
Introduction to TITLE
Situation of electricity in modern era is itself enough to define the need of unconventional way
Electricity : A second need of Human Beings It needs in every moment of our daily life e.g. charging for mobile,For decoration, even I am here giving the presentation with help of it.
Objectives
The major objectives of this project is to think over the unconventional resources.
These resources are reliable.
To achieve our goal.
Result of the project
Today , in terms of electricity , we are very much extrovert. So, this is our small step.
We have so many areas where electricity not proper, so we can implement it there.
Scope , Advantage, Disadvantage Less floor Area
Low budget
Easy maintenance
No obstruction to traffic
Suitable at traffic areas, signals, malls, multiplexes etc.
For lightening up the street light and storage purpose.
Principle of work
We use the basic principle of conversion of mechanical energy to electrical energy
Mechanism can be used
Rack- Pinion mechanism
Roller mechanism
Crank shaft mechanism
Rack pinion mechanism
Rack and pinion assembly gives good mounting convenience.
Maximum gear loss is 3 to 5%
Its efficiency is almost 96%
DC MOTOR
We select DC motor as a generator in our initial steps
Selection of generator is challenging phase.
Selection of springs
Proper balance of speed and torque
Future scope
The generated electricity can be used for street light
In huge model and high input of load of vehicle , the power can be distributed to the villages
Further enhancement could be lead to the new ideas in this unconventional resources.
More suitable and very much compact to increase efficiency