Synertech products are used as equipment Enclosures, … · Polymer Concrete and Sheet Moulding...
-
Upload
duongquynh -
Category
Documents
-
view
217 -
download
3
Transcript of Synertech products are used as equipment Enclosures, … · Polymer Concrete and Sheet Moulding...
AB
C
A. High Density Polymer Concrete (PC) Cover
• Cover weight meets OSHA handling weight up to size 17x30.
• Increased coefficient of friction suitable for location in sidewalks or walkways (.50 per W.U.C. Guide 3.6).
• Covers available with S. Steel Hex, Penta, or Vandal Proof hardware.
B. High Density Polymer Concrete (PC) Ring
• PC cover support ring is fused with SMC body providing a rigid, straight wall, stackable design.
• PC ring and cover are both UV and chemical resistant.
C. Sheet Molded Compound (SMC) Body
• Body weight meets OSHA handling weight up to size 17x30.
• Straight wall design allows unit stacking for increased depths.
• Easy conduit access and component mounting flexibility.
• Uses standard hole saw blade (no diamond tipped carbide blades required).
• Easily mounted component/slack cable racking hardware.
• Light weight body reduces unit weight for ease of field transportation and installation.
Body: Polymer Composite with Polymer Concrete Ring
Cover: Polymer Concrete
Synertech® products are used as equipment Enclosures, meter boxes, valve boxes, or whenever underground access is required.
This durable straight walled enclosure is tough and light weight.
Composite
11x18 11” x 18”
Straight
12” 18” 24” 30” 36”
15,000 lbf Tier 15
12x12 12” x 12” 12” 18” 24” 30” 36”
13x24 13” x 24” 12” 18” 24” 30” 36”
17x30 17” x 30” 12” 18” 24” 30” 36” 42”
24x36 24” x 36” 18” 24” 36” 42” 48” 60” 72”
22,500 lbf Tier 2230x48 30” x 48” 18” 24” 36” 42” 48” 60” 72”
36x60 36” x 60” 24” 36” 48” 60” 72”
Material Model Size (LxW) Shape Wall Type Depths Design Load Tier
Blue - Stacked Body Units Actual load rating is determined by the box and cover combination. Stacked body units are currently not rated.
oldcastleprecast.com/enclosuresolutions
For more information on Enclosures or a
distributor near you call (800) 735-5566
Components and Options
Testing and Features
VARIETY OF SIZES From 11” x 18” to 36” x 60”
STRENGTH Polymer Concrete and Sheet Moulding Compound create exceptional toughness and reduced weight
LOAD RATING Medium Duty and Heavy DutyNon-deliberate Traffic
STRAIGHT WALL DESIGN For stackable applications
CUSTOMIZABLE Special markings and marking plates are available
LIGHTWEIGHT - EASY TO HANDLEEnclosures up to 17” x 30” conform to OSHA Section VII Chapter 1 - Allowable handling weight
AMR FRIENDLY MATERIAL assures accurate transmission of data
Tier Certified MaximizedStrength
ImpactTested
StorageInside
ChemicalResistant
Non-Conductive
Freeze/ThawResilient
Security
Non-Flammable
CustomOptions
SunlightResistant
OpenBottom
SE05v04©2015 Oldcastle, Inc.