Synergy Specs Draft 01 -...
Transcript of Synergy Specs Draft 01 -...
AEF - DirectConnectLEDLED Retrofit kit for T12, T8 and T5 fixtures
FEATURES• Patented magnetic attachment system with optional
mechanical attachment
• DLC approved for rebates
• Ability to delamp - No kits needed for positioning
• Highest lumen per watt packages
• Existing ballast is disconnected - power directly to
line voltage
• Safest retrofit in the industry - lampholders are
NOT energized
• Light angle to 160 degrees
• 5 year non-prorated warranty
• Connect (2) 4’ to make an 8’
• 3 to 5 minute installation
• Quick disconnect - no lock out or tag out needed
• Patented Daisy Chain solution to 240’
2020 Howell Mill Road Suite C-360 | Atlanta, GA 30318 Ph: 888-925-4632 alwaysearthfriendly.com
Dimension2’ = (L) 22.562 (W) 1.312” (H) 1.437”
4’ = (L) 44.562” (W) 1.312” (H) 1.437”Weight 2’ = 6 oz 4’ = 9 oz
HousingAluminum Extrusion and
Poly Carbonate DiffuserRated Life > 65,000 hours
Work EnvironmentIndoor use (applicable for
dry environments) IP50Operating Temperature -20 - 60°C (-4 - 140°F)
Color Temperature 4000K or 5000K CRI 84
Lumen Maintenance 55°C
at 9000h98.89% Input Voltage/Current 100-300VAC
THD < 10% Power Factor > 0.98
Technical Specifications
Model Size Input Power Lumens/Frosted Lens Lumens/Clear Lens
LMT8213 F or C
LMK213 F or C *2’
3 lamps/fixture
13W
36W
126 lm/w = 1498 lm
87 lm/w = 3153 lm
134 lm/w = 1564 lm
92 lm/w = 3342 lm
LMT8418 F or C
LMK418 F or C *4’
2 lamps/fixture
18W
36W
125 lm/w = 2230 lm
98 lm/w = 3466 lm
133 lm/w = 2360 lm
104 lm/W = 3674 lm
LMT8422 F or C
LMK422 F or C *4’
2 lamps/fixture
22W
44W
120 lm/w = 2630 lm
941 lm/w = 4010 lm
129 lm/w = 2730 lm
101 lm/w = 4310 lm
LMT8422HO F or C
LMK422HO F or C *4’
2 lamps/fixture
24W
46W
148 lm/w = 3475 lm
127 lm/w = 5893 lm
158 lm/w = 3698 lm
133 lm/w = 6291 lm
* DLC Retrofit kit part number. Lm/w and delivered lumen values were determined
based upon testing completed on a 2x4 troffer with acrylic lens.
DirectConnectLED
Frosted or Clear lens options available
Patented high powered magnet system on the back of
the unit allows to simply magnetize or screw-in to
the existing fixture.
Connect Power Whip to incoming line voltage and plug
into the DirectConnectLED unit. Existing fixture lamp
holders are NOT energized or replaced. No “kits” needed!
Easy, scalable solution allows for unique custom configurations!
2020 Howell Mill Road Suite C-360 | Atlanta, GA 30318 Ph: 888-925-4632 alwaysearthfriendly.com