Synergy Hip System
-
Upload
ingridbach -
Category
Documents
-
view
222 -
download
0
Transcript of Synergy Hip System
7/27/2019 Synergy Hip System
http://slidepdf.com/reader/full/synergy-hip-system 1/4
http://www.smith-nephew.com/professional/products/all-products/synergy-hip-system-includes-cemented-and-uncement/
SYNERGY◊ Hip System with options that include: Porous, HA, HA on Porous, and Cemented
Overview Design and Technology
SYNERGY One system for Stability, Biomechanical Restoration, and Clinical Results With over 500,000 stems successfully implanted since 1997, SYNERGY Hip System has been one of the fastest growing hips in orthopaedics.
Why? Because SYNERGY is a complete system, with state-of-the-art options, that utilizes simple,
efficient instrumentation.
Features and Benefits The SYNERGY Hip System provides you a complete range of options to match your patients'needs. The implants include solutions for:• Cementless,• Cemented• Fracture management cases-CONQUEST FX
Each of these options uses the same surgical technique and the same two trays of surgicalinstruments.The SYNERGY Hip System gets initial stability through three-point fixation:• posterior proximal
• anterior midway• posterior distalSynergy is a bonded system approach and can be used with or without cement. This versatilesystem allows you to use one set of instrumentation.Note: CONQUEST FX is a low demand, fracture management option that is implanted with theSYNERGY instruments. This option can be press-fit or cemented.
7/27/2019 Synergy Hip System
http://slidepdf.com/reader/full/synergy-hip-system 2/4
Design and Technology
Sophisticated design
SYNERGY Hip System incorporates successful Smith & Nephew design features including unique
neck geometry and dual progressive offsets.
• Standard and high offset designs
• Threaded driving platform with an elliptical slot
• Improved neck geometry
• Recommended head/neck ratio
• No unnecessary anteversion
• Optimized 12/14 taper
Superior range of motion
The circulotrapezoidal neck and optimized 12/14 taper designs of SYNERGY stems provide
increased range of motion (ROM) compared to other designs.
Surgical simplicity
All of the stems in the SYNERGY system (cemented and cementless) use the same 2 trays of
instrumentation. The simple ream-and-broach system provides operating room efficiency: ream to
a 14, broach to a 14, implant a 14 stem.
• Locking broach handles
• Few trial necks required
• A variety of trial heads
• Rigid stem inserter
• Easy-to-use anteversion handle
Cementless Stems
The cementless line of SYNERGY stems is manufactured from a titanium alloy, Ti 6Al-4V
1. Porous
The sintered-bead ROUGHCOAT™ Porous Coating is manufactured from commercially
pure titanium
2. HA
SYNERGY HA is a press-fit stem with the proximal one-third sprayed with 50 microns of almost100% pure HA over a grit-blasted surface.
3. Porous Plus HA
SYNERGY Porous Plus HA Cementless Stem uses the same technology as the SYNERGY Porous
Stem. HA is applied to the porous coating using the same specifications as the HA stem.
Cemented Stems
SYNERGY Cemented Stem offers many of the advantages of the cementless system, along with
special benefits due to its unique design. SYNERGY Cemented Stem is made of forged cobaltchrome with a satin surface finish. Features of the cemented stem include:
7/27/2019 Synergy Hip System
http://slidepdf.com/reader/full/synergy-hip-system 3/4
• Cement mantle
• Distal groove stability
• Ramp and collar pressurization
Orthopaedics - Synergy Hip System
Synergy* hofteprotesesystem ble introdusert i 1997.
Målet var å gi ortopeden et valg, men ikke forvirring. Et
system som gir ortopeden mulighet til å velge fra en
samling stammer, men fortsatt kun forholde seg til ett
sett instrumenter.
Følgende femurstammer er del av Synergy Tapered Hip
System og kan bli implantert med ett sett instrumenter.
Synergy Porous har RoughCoat TM porøst belegg
som stimulerer beninnvekst og tredimensjonalforankring mellom implantat og ben.
Synergy HA har hydroksyapatitt-belegg, som gir
sikker fiksasjon.
Synergy HA on Porous har RoughCoat TM porøs
innvekstsone som igjen er belagt med
hydroksyapatitt for å sikre langtidsfiksasjon.
Synergy Titanium Press-Fit tillater bentilvekst og
gir stabilitet med en ru overflate.
Synergy Cemented er laget for sementfiksasjonmed en ru overflate og en krage.
Conquest Fx er en kostnadseffektiv stamme ment
for pasienter med lav aktivitet. Stammen kan
benyttes med og uten sement. ( mer info. på
Conquest Fx)
Synergy Porous, HA, HA on Porous, og Cemented er
alle tilgjengelig med standard og High Offset størrelser.
Porous HA Coated HA on
Porous
Press-Fit