SYMBOLS - Beghelli Hungary - Biztonsági világítás ...beghelli.hu/INS/825116000_illum.pdf · EN...

825.116.00020152015

SYMBOLSSYMBOLS

SMARTDRIVER

SMARTREVOLUTION

SM

AR

TD

RIV

ER

DARKLIGHT

Low luminosity optics Visual comfort is obtainedwith correct lighting design, using fixtures in whichthe control of the luminous flux reduces direct andreflected glare. Beghelli propose 5 classifications oftheir flux-control optics.

Low luminosity optics, less than 200 cd/m for angles greater than60 longitudinal and transverse, and for radial angles compliant withEN 12464-1 limit 1000cd/m


Low luminosity optics compliant with standard EN 12464-1 limit1000cd/m



DKL3

DKL4

DKL5

DKL2

DKL1

LIGHT SOURCES SUPPLIED WITH BEGHELLI FIXTURES

Beghelli products must be used with light sources complying with the provisions of the mostrecent laws in terms of energy efficiency and environmental impact. When supplied with thelighting fixtures, the proposed lamps supplied comply with the provisions of the respectivelaws (reg 244/09, 245/09 and 1194/2012).

European quality mark

Italian safety mark

GSM transmission of the energy saving data tothe Beghelli Services database

Built-in FH-DSSS radio transceiver operating inthe band 2.400-2.863 GHz

IP65 Fixtures with class II insulation level.Fixtures without this symbol are to be considered class I.

L80B20 indicator of product flux maintenance. It specificallyindicates that, within the number of hours specified on the

product data sheet, 80% of the number of LEDs will not losemore than 20% of the flux.

The number of hours specified on the product data sheetrefers to the most critical product, therefore in conditions oflower power and at a working temperature lower than 25C

a substantial increase of the product performance maybe expected.

SDCM - Standard Deviation Colour Matching is thestandard deviation of the correspondence of colours

between two lamps. With a value of 3 SDCM or less, thelamps emit light with a colour that is difficult to perceive

with the human eye.

Protection Grade against external factors(According to CEI EN 60598-1)

IK09 Protection Grade against impact of the fixturecomplying with test methods (According to EN 50102)

SmartDriver: Dimmable control gear for LEDsources which has two connectors for as manyoptional devices that modify the characteristicsof the fixture. The first connector is exclusivelyfor connection of the Autodimmer Sensor, thesecond is for a Building Automation Module

chosen from the SmartDriver series. Alternativemodules that can be connected: BuildingAutomation Module, Dali Module - 0/10W,Grande Esco Italia Module, Vision Module.

IP40IP41

Protection Grade against external factors of a part ofthe fixture (housing, optics) (according to

CEI EN 60598-1)

HACCP

Fixtures with absence of potentially contaminatingelements, suitable for use in places subject to HACCP

audit (food supply chain).

Devices complying with European Communitydirectives

Indicates Resistance Temperature of theproduct to the incandescent wire test

(CEI EN 60598-1)850C

M Lighting fixtures with soft light

Technologically advanced products, designedspecifically with a view to energy saving, recycling at

the end of their working life, and reduced periodic wearof parts during use.

Fixtures with product integrity ensured according toStandard UNI 9554, DIN 18031-3.

Suitable for installation in gymnasiums

GGYM

Fixture intended for use with a risk of explosion due to thepresence of combustible powders or explosive substances

according to theATEX Directive (see facing page)

UVFixtures characterized by particular resistance

to UV radiations

UV-OILFixtures with particular resistance to UV radiation and

aggression by mineral oils

Line of fixtures in sheet steel and toughened glass withhigh characteristics of resistance to external agents

LightingSymbols and approvals

Lighting fixtures with respectively directand indirect light

The light fixtures in the Stella Polare LED line areequipped with particularly performing diffusers and

optics. In a comparison with standard fixtures on themarket, with a greater luminous flux (lumen), BeghelliLuce Utile fixtures ensure up to 20% more illumination

on the work surface (lux).This greater efficiency is expressed in an equivalent

energy saving.

Centralized low-voltage safety system and fixtures ofthe SICURO 24 series

(for availability contact the Beghelli sales network)

SLGS

GB int_cop SPSD_01 21/05/15 14:58 Pagina 4

DARKLIGHT

Low luminosity optics Visual comfort is obtainedwith correct lighting design, using fixtures in whichthe control of the luminous flux reduces direct andreflected glare. Beghelli propose 5 classifications oftheir flux-control optics.






DKL3

DKL4

DKL5

DKL2

DKL1

LIGHT SOURCES SUPPLIED WITH BEGHELLI FIXTURES

Beghelli products must be used with light sources complying with the provisions of the mostrecent laws in terms of energy efficiency and environmental impact. When supplied with thelighting fixtures, the proposed lamps supplied comply with the provisions of the respectivelaws (reg 244/09, 245/09 and 1194/2012).

European quality mark

Italian safety mark

GSM transmission of the energy saving data tothe Beghelli Services database

Built-in FH-DSSS radio transceiver operating inthe band 2.400-2.863 GHz

IP65 Fixtures with class II insulation level.Fixtures without this symbol are to be considered class I.

L80B20 indicator of product flux maintenance. It specificallyindicates that, within the number of hours specified on the

product data sheet, 80% of the number of LEDs will not losemore than 20% of the flux.

The number of hours specified on the product data sheetrefers to the most critical product, therefore in conditions oflower power and at a working temperature lower than 25C

a substantial increase of the product performance maybe expected.

SDCM - Standard Deviation Colour Matching is thestandard deviation of the correspondence of colours

between two lamps. With a value of 3 SDCM or less, thelamps emit light with a colour that is difficult to perceive

with the human eye.

Protection Grade against external factors(According to CEI EN 60598-1)

IK09 Protection Grade against impact of the fixturecomplying with test methods (According to EN 50102)

SmartDriver: Dimmable control gear for LEDsources which has two connectors for as manyoptional devices that modify the characteristicsof the fixture. The first connector is exclusivelyfor connection of the Autodimmer Sensor, thesecond is for a Building Automation Module

chosen from the SmartDriver series. Alternativemodules that can be connected: BuildingAutomation Module, Dali Module - 0/10W,Grande Esco Italia Module, Vision Module.

IP40IP41

Protection Grade against external factors of a part ofthe fixture (housing, optics) (according to

CEI EN 60598-1)

HACCP

Fixtures with absence of potentially contaminatingelements, suitable for use in places subject to HACCP

audit (food supply chain).

Devices complying with European Communitydirectives

Indicates Resistance Temperature of theproduct to the incandescent wire test

(CEI EN 60598-1)850C

M Lighting fixtures with soft light

Technologically advanced products, designedspecifically with a view to energy saving, recycling at

the end of their working life, and reduced periodic wearof parts during use.

Fixtures with product integrity ensured according toStandard UNI 9554, DIN 18031-3.

Suitable for installation in gymnasiums

GGYM

Fixture intended for use with a risk of explosion due to thepresence of combustible powders or explosive substances

according to theATEX Directive (see facing page)

UVFixtures characterized by particular resistance

to UV radiations

UV-OILFixtures with particular resistance to UV radiation and

aggression by mineral oils

Line of fixtures in sheet steel and toughened glass withhigh characteristics of resistance to external agents

LightingSymbols and approvals

Lighting fixtures with respectively directand indirect light

The light fixtures in the Stella Polare LED line areequipped with particularly performing diffusers and

optics. In a comparison with standard fixtures on themarket, with a greater luminous flux (lumen), BeghelliLuce Utile fixtures ensure up to 20% more illumination

on the work surface (lux).This greater efficiency is expressed in an equivalent

energy saving.

Centralized low-voltage safety system and fixtures ofthe SICURO 24 series

(for availability contact the Beghelli sales network)

SLGS

GB int_cop SPSD_01 21/05/15 14:58 Pagina 4

xcbxfbxvbcv

1

Luminaires in the lighting world . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Fixtures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Technical annex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Self-adapting activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Centralized activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Building automation lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Detection of presences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Dynamic detection of presences: Vision System . . . . . . . . . . . . . . .92

Devices for building automation implementation

Building automation control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . .94

Building automation PC software . . . . . . . . . . . . . . . . . . . . . . . . . . .95

Building automation radio interface . . . . . . . . . . . . . . . . . . . . . . . . . .95

Building automation radio transmitter interface . . . . . . . . . . . . . . .96

Building automation radio receiver interface . . . . . . . . . . . . . . . . . .96

Building automation radio module . . . . . . . . . . . . . . . . . . . . . . . . . . .97

DALI/0-10V module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

Grande ESCo Italia radio module . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

Vision module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

Vision Radio module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Acciaio AutoDimmer Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

AutoDimmer Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

AutoDimmer Box Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Contents

2

The highly technological identity and the value of the Beghellibrand are fully expressed in the project for the renewal ofemergency fixture light sources and now also of lighting. In theStella Polare project, the use of high-efficiency LEDs and acalibrated light beam produces adequate lighting while maintainingvery high energy saving.

The Luce Utile (Useful Light) philosophy springs from the need toobtain an ideal beam of light for lighting and emergency lightingthat gives the maximum possible light output. The optics havebeen specially designed to solve lighting problems on the groundwith a smaller number of fixtures, respecting the valuesenvisaged by the regulations in force.

After the great success of Stella Polare LED Emergency, we are

proud to present on the market the new Beghelli proposal for

ordinary, technical and industrial lighting, LED.

And so the Stella Polare LED Light line is born, which exploits the

continuous efforts our group has always dedicated to the search for

new ideas, maximum efficiency in optical and lighting performance,

with consequent important energy saving values.

We are certain that all experts in the sector designers, architects,

wholesalers and installers will recognise in the Stella Polare LED

Emergency and now in the Lighting project, the innovative spirit that

animates us, and will propose its advantages to their interlocutors

and customers to improve the quality of their life.

Gian Pietro Beghelli

LuceUtile ProjectIt does not matter how much light a fixture emits.What makes it important is what its light shows,

transforming it into a useful lighting fixture.All the light outside the controlled beam is just a waste of energy.

We give even more valueto Savings Each appliance can be fitted with a specificsystem for recording energy consumptiondata, designed to supply the necessaryinformation to bodies authorized by theEnergy Service Company (ESCo) in order toobtain Energy Saving Certificates (WhiteCertificates). Grande ESCo Italia has all thenecessary certifications and the technologycompatible with the Stella PolareSmartDriver system equipped with theGrande ESCO Italia Module.

From today, all the fixtures inthe Stella Polare LED line areequipped with SmartDriver,an electronic control gear ofthe latest generation. A newpoint of arrival for electronicintelligence linked to thelighting world.

Focus on functional expandabilityand high lighting performance:the management of every singlefixture can be customized byintegrating the appropriate SDbuilding automation Sensors orModules which can be individuallyconnected to the SmartDriver.

3

Luminaires in theemergencyworld

Building automation intelligenceThe system allows specific luminousscenarios to be set, linked to everydaysituations, or specially studied for carrying outparticular activities. The scenarios can beactivated both locally, with the BuildingAutomation Control unit connected toa PC, and in remote mode through a Webinterface, a Smartphone or a Tablet

Wireless controlWe reproduce all the functions of the mostmodern lighting systems, avoiding the layingof additional cables or BUS (e.g. DALI). Themodularity of the SmartDriver system allowsthe function to be activated with only theconnection of the Building AutomationModule, equipped with a radio antennaand programmed to activate as soon as it isconnected.

Self-adapting dimmerEach SmartDriver appliance, equipped withan Autodimmer Sensor, becomesautonomous in its basic functions: it managesthe lighting by automatically regulating theluminous intensity according to the natural orartificial light already present in theenvironment, with energy savings of up to30% greater than LED fixtures with a fixedlight intensity.

Dynamic detection of presences

A colour camera on board the appliance forthe active and multidimensional detection ofpresences frames the work area anddivides it into quadrants, individuallyconnected to automatic actions on thelighting system, given by the movement ofthe people. This exclusive characteristicpresent in the Vision Module allows thesystem to respect the Standard for theLighting of Workplaces UNI EN 12464-1. Theimages recorded can be downloaded bythe Building Automation Control unit.

SMARTDRIVER

Total compatibility with Building Automation

The SmartDriver project allows a dialoguewith other communication protocols like theDALI. The special DALI Module / 0-10Vallows both DALI interfacing and 0-10Vanalogue dimming with direct control.

4

5

FIX

TU

RE

S

Contents

IP66Lighting fixtures

F250/400 LEDpage 60

P236/P258 LEDpage 20

IP66

IP20

D226 LEDpage 38

IP20

D170/1150 LEDpage 36

IP20

D170/1150 LED ADJUSTABLEpage 48

IP44IP20

IP20

ZOOM LED - wall, ceilingpage 30

IP40

ZOOM LED - trackpage 28

IP40

H250/400 LEDpage 54

IP66

ACCIAIO ECO LEDpage 10

WW135/170 LEDpage 42

IP44IP20

M600 I418 LEDpage 14

IP20IP66

ACCIAIO TOP LED ATEXpage 8

IP20SmartDriver control devices and Building Automation lighting

BUILDING AUTOMATION RADIO TRANSMITTER INTERFACEpage 96

IP20

VISION RADIO MODULEpage 99

IP20

BUILDING AUTOMATION RADIO RECEIVERINTERFACEpage 96

IP20

BUILDING AUTOMATION CONTROL UNITpage 94

BUILDING AUTOMATION PC RADIO INTERFACEpage 95

IP20

F50 LEDpage 72

IP66

FH 70/150 LEDpage 66

IP66

New

S70/100/150 LEDpage 78

IP66

New

New

New New New

SMARTDRIVER

SOFTWAREDOMOTICO

SD BUILDING AUTOMATION SOFTWAREpage 95

IP20

New

New

IP20

BUILDING AUTOMATION RADIO MODULEpage 97

IP20

GRANDE ESCO ITALIA RADIO MODULEpage 98

IP20

DALI MODULE / 0-10Vpage 97

IP20

ACCIAIO AUTODIMMER SENSORpage 99

AUTODIMMER SENSORpage 100

IP20

AUTODIMMER SENSOR BOXpage 100

IP20

New New

New

New

New New

VISION MODULEpage 98

IP20

New

New

New

6

7

Excellent performance for LEDlighting in the tertiary and

industrial sector. The structuralsimplicity of Acciaio LED,combined with technicalmaterials such as splined

technopolymers and toughenedglass, make it a product suitable

for installation in particularlydemanding conditions,

thanks to protection gradesIP66 and IK09.

The whole allows the projection,through the microprismatic

crystal, of a highly technologicallouvre specially designed for

high-efficiency LEDs, to ensurethe maximum of light outputwithout glare. The innovativehead with screw cap allowseasy installation and easyconnection with specificaccessories such as the

intelligent light sensor or the LEDemergency module with built-in

source and inverter.

Acciaio LEDsturdy and intelligent

FIX

TU

RE

S

SPECIAL VARIATIONS: COLOUR RENDERING 90 - COLOUR TEMPERATURE ON REQUEST - WITH THREE-PHASE THROUGH WIRING - WITH POLYCARBONATE DIFFUSER (HACCP)Contact the Beghelli sales network

8

acciaio top leD atexWaterproof ceiling fitting

Acciaio Top LED Atex is the reply to the request for products with ahigh technological content for particularly demanding applications inhigh-risk areas. The steel housing and glass diffuser present bothexcellent mechanical resistance (IK09) and resistance to aggressivechemical agents. In the industrial field, it is ideally used in installationsin environments with an explosive atmosphere, caused either byalterations of a gaseous type or by the presence of combustiblepowders suspended in the air, since it already complies withStandard ATEX 94/9/EC for zones 02 and 22.The optic system is composed of a diffuser subdivided into 15 cells foroptimal light distribution, and a special microprismatic glass with very highlight transmittance for greater visual comfort.Acciaio Top LED Atex is suitable for heavy-duty use even in outdoorenvironments directly exposed to inclement weather: it is designed toresist mechanical vibrations and electromagnetic disturbances typicalof industrial environments.

General characteristics

Equivalent power* 2x80 W

Power supply 230Vac 10% 50/60Hz176-276 Vdc

Standard EN 60598-1, EN 60598-2-1, EN 60598-2-22 (fundamentalrequirements), UNI9554:1989, DIN 18032-3:1997-04, EN 62471(Photobiological hazard), ATEX 94/9/EC

Protection grade IP66

Working temperature -20C +40C

Mountings ceiling, suspension, electrified rail

Electronic gear Electronic SD (cos j 0.96)Electronic with intelligent dimming

Housing polyester powder coated sheet steel RAL 7035

Head Caps Technopolymer PC+PBT

Louvre Wide anti-glarealuminium

Diffuser microprismatic toughened glass with high transmittance

MTBF Control gear** 65.000 h

Luminous flux >60.000 (L80B20)maintenance**

Colour tolerance 3 SDCM

* Equivalent power for comparison with fluorescent tube fixtures** At a reference working temperature of 25C - Cable gland M20

15018 KIT ATEX ACCIAIO ECO

Accessories installed on the fixtureOrder Code Description

20082 MOD EM ACC LED/T5 TR SE1NRM20085 MOD EM ACC LED/T5 AT/LG SE1/3H 20086 MOD EM ACC LED/T5 LGFM SE 1/3H 20113 WIDE ACC DIFFUSER 150017220 INV LED SLGS SICURO 24V15019 INPUT DOUBLE COUPLING M20

Accessories to be ordered separatelyOrder Code Description

Power* Dimensions (mm) WeightW L L2 B H max kg

2x80 1565 1625 108 90 3.9

L

H

B

L2

H

B

with external LED module for emergency lighting

20102 BUILDING AUTOMATION CONTROL UNIT 20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15020 ACCIAIO AUTODIMMER SENSOR15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE15027 ACCIAIO VISION MODULE 3MT 15028 ACCIAIO VISION MODULE 6MT

Building automation to be ordered separately Order Code Description

SMARTDRIVER

SMARTREVOLUTION

GGYMIP66

UV-OIL 960C

IK09230V50Hz

SLGS

SD BUILDING AUTOMATION MODULES INDIVIDUALLY CONNECTED TO THE BEGHELLI SMARTDRIVER

BuildingAutomationmodule

Grande ESCO Italia module Vision module

DALI / 0-10Vmodule

Autodimmersensor

9

FIX

TU

RE

S

Acciaio top LED Atex SmartDriver electronic reactor

A280ESD ACCIAIO TOP LED 2X80 SD 4K 68 4000 K >80 74 180 10440 8100 A++ 110

Power LED Colour CRI Absorption Flux of LEDs Flux of * Energy LuminousOrder Code Description W temperature K Max W NLEDs lm (Tj=25C) Fixture lm Class efficiency lm/WPower* W

2x80

* Indicative power for comparison with fluorescent tube fixtures

MOUNTING ON ELECTRIFIED RAIL SUSPENDED MOUNTING

20082 MOD EM ACC LED/T5 TR SE1NRM to be ordered separately

20085 MOD EM ACC LED/T5 AT/LG SE1/3H to be ordered separately

20086 MOD EM ACC LED/T5 LGFM SE 1/3H to be ordered separately

EXTERNAL LED MODULE FOR EMERGENCY LIGHTING

20113 WIDE DIFFUSER ACCIAIO 1500 to be ordered separately

MOUNTING FOR EMITTING WIDE LIGHT

Standard optic Wide optic

Diagramma polarePolar Diagram

* WHEN THE LUMEN DONT COUNT

The light fixtures in the Stella Polare LED line are equipped withparticularly performing diffusers and optics. In a comparison withstandard fixtures on the market, with a greater luminous flux (lumen),Beghelli Luce Utile fixtures ensure up to 20% more illumination on thework surface (lux). This greater efficiency is expressed in an equivalentenergy saving.

SPECIAL VARIATIONS: COLOUR RENDERING 90 - COLOUR TEMPERATURE ON REQUEST - WITH THREE-PHASE THROUGH WIRING - WITH POLYCARBONATE DIFFUSER (HACCP)Contact the Beghelli sales network

10

acciaio eco leDWaterproof ceiling fitting

Acciaio Eco LED is the reply to the request for products with a hightechnological content for particularly demanding applications in high-risk areas. The steel housing and glass diffuser present both excellentmechanical resistance (IK09) and resistance to aggressive chemicalagents. In the industrial field, it is ideally used in installations inenvironments with an explosive atmosphere, caused either byalterations of a gaseous type or by the presence of combustiblepowders suspended in the air (according to Standard ATEX 94/9/ECfor zones 02 and 22).The optic system is composed of a diffuser subdivided into 12 cells foroptimal light distribution, and a special microprismatic glass with very highlight transmittance for greater visual comfort.Acciaio Eco LED is suitable for heavy-duty use even in outdoorenvironments directly exposed to inclement weather: it is designed toresist mechanical vibrations and electromagnetic disturbances typicalof industrial environments.


Equivalent power* 1x36, 2x36, 1x58, 2x58 W

Power supply 230Vac 10% 50/60Hz 176-276 Vdc(only for SD versions)

Standard EN 60598-1, EN 60598-2-1, EN 60598-2-22 (fundamentalrequirements), UNI9554:1989, DIN 18032-3:1997-04, EN 62471(Photobiological hazard), ATEX 94/9/EC




Electronic gear Electronic SD with intelligent dimming(cos j 0.96)

Housing polyester powder coated sheet steel RAL 7035

Head Caps Technopolymer PC+PBT

Louvre Wide anti-glarealuminium

Diffuser microprismatic toughened glass with hightransmittance




*Equivalent power for comparison with fluorescent tube fixtures** At a reference working temperature of 25C

Power* Dimensions (mm) WeightW L L2 B H max kg

1x36 1225 1285 108 90 3.2

2x36 1225 1285 108 90 3.2

1x58 1225 1285 108 90 3.2

2x58 1225 1285 108 90 3.2

L1

H

B

L

H

B

L2

H

B

cablaggio passante

con testata di emergenza LED

L1

H

B

L

H

B

L2

H

B

cablaggio passante

with external LED module for emergency lighting

20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15020 ACCIAIO AUTODIMMER SENSOR15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE15027 ACCIAIO VISION MODULE 3MT 15028 ACCIAIO VISION MODULE 6MT


20082 MOD EM ACC LED/T5 TR SE1NRM 20085 MOD EM ACC LED/T5 AT/LG SE1/3H 20086 MOD EM ACC LED/T5 LGFM SE 1/3H 20107 WIDE ACC DIFFUSER 120017220 INV LED SLGS SICURO 24V15019 INPUT DOUBLE COUPLING M2015018 KIT ATEX ACCIAIO ECO


- Cable gland M20

Accessories installed on the fixtureOrder Code Description

SMARTDRIVER

SMARTREVOLUTION

GGYMIP66

UV-OIL 960C

IK09230V50Hz

SLGS

1x362x361x582x58

** 1x36** 2x36** 1x58** 2x58

A136ESD ACCIAIO E LED 1X36 SD 4000K 17 4000 K >80 22 48 3150 2500 A++ 110A236ESD ACCIAIO E LED 2X36 SD 4000K 35 4000 K >80 40 96 5570 4400 A++ 110A158ESD ACCIAIO E LED 1X58 SD 4000K 26 4000 K >80 32 72 4400 3500 A++ 110A258ESD ACCIAIO E LED 2X58 SD 4000K 52 4000 K >80 58 144 8350 6500 A++ 110

A136E ACCIAIO E LED 1X36 D 4000K 17 4000 K >80 22 48 3150 2500 A++ 110A236E ACCIAIO E LED 2X36 D 4000K 35 4000 K >80 40 96 5570 4400 A++ 110A158E ACCIAIO E LED 1X58 D 4000K 26 4000 K >80 32 72 4400 3500 A++ 110A258E ACCIAIO E LED 2X58 D 4000K 52 4000 K >80 58 144 8350 6500 A++ 110



Grande ESCO Italiamodule Vision module

DALI/0-10Vmodule

11

Acciaio Eco LED SmartDriver electronic reactor Power LED Colour CRI Absorption Flux of LEDs Flux of * Energy Luminous

Order Code Description W temperature K Max W NLEDs lm (Tj=25C) Fixture lm Class efficiency lm/WPower* W

* Indicative power for comparison with fluorescent tube fixtures - ** version with electronic Reactor with traditional technology

MOUNTING ON ELECTRIFIED RAIL SUSPENDED MOUNTING

20082 MOD EM ACC LED/T5 TR SE1NRM to be ordered separately

20085 MOD EM ACC LED/T5 AT/LG SE1/3H to be ordered separately

20086 MOD EM ACC LED/T5 LGFM SE 1/3H to be ordered separately

EXTERNAL LED MODULE FOR EMERGENCY LIGHTING

20107 WIDE DIFFUSER ACCIAIO 1200 to be ordered separately

MOUNTING FOR EMITTING WIDE LIGHT

FIX

TU

RE

S



Standard optic Wide optic

Polar DiagramPolar Diagram

Autodimmersensor

12

Acciao LED on an electrified rail is a typicalinstallation in industrial environments,workshop and high-risk areas. The fixture isalso available in the Atex version forparticularly heavy-duty situation and, thanksto the steel housing and technopolymerheads, it possesses very high resistance(IP66-IK09).

13

FIX

TU

RE

S

14

15

FIX

TU

RE

S

The maximum performance forLED lighting in the tertiary sector.The structural simplicity of M600I418 LED is conceived for use inoffices or modern and essential

workplaces.This combination of simplicity andsolidity reveals its elegance in the

most performing diffuser in itscategory, designed with direct andindirect emission to obtain a soft

light effect, appreciably increasingcomfort in the environment.

M600 I418 LEDrecessed and ceiling


The light fixtures in the Stella Polare LED line are equipped with particularlyperforming diffusers and optics. In a comparison with standard fixtures on

the market, with a greater luminous flux (lumen), Beghelli Luce Utile fixturesensure up to 20% more illumination on the work surface (lux). This greaterefficiency is expressed in an equivalent energy saving.

1616

Recessed fixture for mounting in an exposed structure, slats andplasterboard. Also for CEILING mounting with an adaptor. Characterized byexcellent Dark Light anti-glare control, its use is particularly indicated in allworkplaces with video terminals where employees are exposed to artificial lightfor long periods.The exact emission of light on the work surface gives precision to thebeam of light, the indirect emission that is reflected on the sidereflectors considerably increases comfort thanks to an overall result ofsoft light.Additional accessories are also available for integrating emergencylighting: the LED Inverter for lighting up part of the fixture in the eventof a black-out, or the LED Module for inserting in the seat provided.

M600 i418 leDCeiling, recessed M600, slats



Power supply 230Vac 10% 50/60Hz176-276 Vdc (only SD versions)

Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamental requirements), EN 62471 (Photobiological hazard)

Protection grade IP20, IP54

Mountings recessed M600, slats, plasterboard,ceiling

Electronic gear SELV electronic SD (cos j 0.96)Electronic with intelligent dimming

Housing Polyester powder coated sheet steel RAL 9003

Louvre sheet metal Dark light typeUGR




DALI/0-10Vmodule

Autodimmersensor

17

FIX

TU

RE

S

Polar Diagram

RECESSED MOUNTING ON MODULE 600

10404 Bracket for plasterboard/slats to be ordered separately

RECESSED MOUNTING ON PLASTERBOARD/SLATS

Recess hole dimensions: 580x580 mm

1232 Ceiling adapter

CEILING MOUNTING

I418SDPC with polycarbonate diffuser

I418SDVT with glass diffuser

VERSION IP54

19350 INVERTER ECOLED SE 1N RM to be ordered separately

19341 MODULE EM LED AT SE 1N to be ordered separately

19342 MODULE EM LED LG SE/SA 1/3H to be ordered separately

19343 MODULE EM LED LGFM SE/SA 1/3H to be ordered separately

17467 MODULE EM LED SLG to be ordered separately

EMERGENCY WITH INVERTER ECOLED/LED MODULE

IP40

17

M600 I418 LED SmartDriver electronic reactor

I418SD INC M600 4X18 LED SD 4000K 32 4000 >80 36 90 4400 4000 110 A++ 1I418SDPC INC M600 4X18 LED SD P IP54 4000K 32 4000 >80 36 90 4400 4000 110 A++ 1I418SDVT INC M600 4X18 LED SD V IP54 4000K 32 4000 >80 36 90 4400 4000 110 A++ 1

I418LED INC M600 4X18 LED B 4000K 32 4000 >80 36 90 4400 4000 110 A++ 1I418TRLED INC M600 4X18 LED TR SD 4000K 32 4000 >80 36 90 4400 4000 110 A++ 1

Power Colour CRI Absorption Flux of LEDs Flux of * Luminous EnergyOrder Code Descrizione LED temperature K Max W NLED lm (Tj=25C) Fixture lm efficiency lm/W class PackagingPower* W

4x184x184x18

** 4x18** 4x18

* Indicative power for comparison with fluorescent tube fixtures - ** version with electronic Reactor with traditional technology

17220 INV LED SLGS SICURO 24V to be ordered separately

19355 INV LED AT/LG 6W 55V 123H to be ordered separately

19356 INV LED LGFM 6W 55V 123H to be ordered separately

RA02 AUTORIPARA INVERTER BATTERY 7.2V 1.7Ah to be ordered separately

EMERGENCY WITH INVERTER LED /AUTORIPARA

AUTORIPARA SYSTEM:

When the Autoripara battery is inserted, theLED Inverter doubles the power or theautonomy, as well as intervening in the eventof a malfunction of the main battery

1818

M600 I418 LED on Module 600 is thesystem most used in offices and in publicadministration. This fixture, with itsparticularly limited thickness, can be easilymounted on the ceiling with the appropriateadapter.

19

FIX

TU

RE

S

19

20

21

FIX

TU

RE

S

In P236 and P258 LED fixtures,particular care was devoted to thestudy of the louvre: with the aid of

optical design software of the latestgeneration, the particular features ofLED lighting have been optimised,

achieving a minimal geometric shapethat nevertheless allows total control

of light reflections.The maximum performance in terms

of intensity and uniformity ofillumination to ensure maximum visualcomfort and a very high light output.

P236 / P258 LEDceiling and suspension

P236/P258 leDCeiling, suspension

Ceiling or suspension fixture for installations in the tertiary sector.Characterized by excellent Dark Light anti-glare control, its use isparticularly indicated in all workplaces with video terminals whereemployees are exposed to artificial light for long periods.The exact emission of light on the work surface gives highcharacteristics of comfort and precision of the beam of light. A rangeof accessories is available for heavy wiring and for mechanical fixingin a continuous row to obtain a civil system of the latest generation.Additional accessories are also available for integrating emergencylighting: the LED Inverter for lighting up part of the fixture in the eventof a black-out, or the LED Module for inserting in the seat provided.

22

960CDARKLIGHT

230V50Hz

B

HL

Power Dimensions (mm) WeightW L B H kg

2x36 1327 206 70 4.6

2x58 1327 206 70 4.6

19355 INV LED AT/LG 6W 55V 123H 19356 INV LED LGFM 6W 55V 123H 17220 INV LED SLGS SICURO 24V20080 P236/58 LED SINGLE SUSPENSION 20081 P236/58 LED SUSPENSION+SINGLE MAINS CABLE19350 INVERTER EcoLED SE 1N20087 COUPLING+ CONT ROW SUSP CABLE20088 THREE-PHASE THROUGH WIRING



Equivalent power* 2x36, 2x58 W


Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamental requirements), EN 62471 (Photobiological hazard)


Mountings ceiling, suspension


Housing polyester powder coated sheet steelRAL 9003

Louvre sheet metal Dark light typeUGR




DALI/0-10Vmodule

Autodimmersensor

23

FIX

TU

RE

S

CEILING MOUNTING DARK LIGHT WIDE OPTIC

20088 THREE-PHASE THROUGH WIRING CEILING to be ordered separately

20087 COUPLING + THREE-PHASE THROUGH WIRING SUSPENSIONto be ordered separately

CONTINUOUS ROW MOUNTING

P236 / P258 LED SmartDriver electronic reactor

P236SD CEILING LED 2x36 SD 4000K 31 4000 >80 36 140 4800 4000 111 A++ 1P258SD CEILING LED 2x58 SD 4000K 42 4000 >80 47 140 6160 5100 109 A++ 1


2x362x58


19350 INVERTER ECOLED SE 1N RM to be ordered separately

19341 MODULE EM LED AT SE 1N to be ordered separately

19342 MODULE EM LED LG SE/SA 1/3H to be ordered separately

19343 MODULE EM LED LGFM SE/SA 1/3H to be ordered separately

17467 MODULE EM LED SLG to be ordered separately

EMERGENCY WITH INVERTER ECOLED

IP40

20080 P236/58 LED SINGLE SUSP to be ordered separately

20081P236/58 LED SUSP+SINGLE CABLE to be ordered separately

SUSPENSION MOUNTING

Polar Diagram

17220 INV LED SLGS SICURO 24V to be ordered separately

19355 INV LED AT/LG 6W 55V 123H to be ordered separately

19356 INV LED LGFM 6W 55V 123H to be ordered separately


EMERGENCY WITH INVERTER LED /AUTORIPARA

AUTORIPARA SYSTEM:


24

P236/P258 LED suspension expresseselegance and simplicity at the same time.With the appropriate accessories, acontinuous row system of great aestheticeffect can be obtained. However, the ceilingversion maintains an excellent design andgreat speed of installation.

25

FIX

TU

RE

S

26

Zoom LED Beghelli is a fixture thatoverturns the already known schemes of

accent lighting. Thanks to a patentedmicrocontrol of the light beam, quite unlikeother products on the market until now,

this fixture has an unprecedentedversatility of use and an efficiency of the

light beam that upset the traditionalconcept of the accent spotlight.The light beam control system is

structured with a technology similar to thatof the most innovative variable focus

camera lenses: a micromovement groupthat, easily and without tools, is able to varythe focal length and therefore the width of

the cone of light.The end result is a unique product that

produces a beam of light with acontinuously variable angle of emission

from 10 to 40.

ZOOM LED Polyvalent is not enough

27

FIX

TU

RE

S

Zoom leD Three-phase electrified track


Equivalent power* 35, 70, 150 W

Power supply 230VAC 50HZ

Standard EN 60598-1,EN 60598-2-1, EN 60598-2-22 (fundamental requirements), EN62471 (photobiological hazard), EN 60570(electrified track)


Mountings Three-phase electrified track


Housing Die-cast aluminium, white RAL 9010

Lenses transparent PMMA

Louvre Zoom LED System




* Equivalent power for comparison with metal halide fixtures** At a reference working temperature of 25C

Adjustable focus projector made of die-cast aluminium whichintegrates the power of 9 high-efficiency LEDs. Patented optics,consisting of a system of variable focus PMMA lenses to adjust thebeam of light with an angle between 10 and 40. Adjustment iscontinuous and is obtained by a regulator on the rear. The fixture canbe oriented on both the horizontal and the vertical axis. The Zoom Ledsystem envisages the used of a vast range of accessories for thecreation of a three-phase electrified track; The adaptor supplied allowsthe spotlight to be used on most of the three-phase electrified tracksavailable on the market. The Zoom Led range has been designedspecifically for accent lighting, where it is essential to enhance theitems on display. Due to this particular feature it does not offerdimming with an AutoDimmer Sensor.The fixture is also available on request in a single-phase version.

B

H

L

28

SINGLE-PHASE VERSION

THREE-PHASE VERSION

L

B

H

SINGLE-PHASE VERSION

Three-phase 330 170 53 1.4Single-phase 239 194 61 1.4

Version Dimensions (mm) WeightL B H max kg

650C

230V50HzIP40 IK05

20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15022 BUILDING AUTOMATION RADIO MODULE15025 GRANDE ESCO ITALIA RADIO MODULE20111 VISION RADIO MODULE 3MT20112 VISION RADIO MODULE 6MT


SMARTDRIVER

SMARTREVOLUTION



Grande ESCO Italiamodule

Beam width 10DiameterDistance Luminosity

0,11 m 119379 lx0,5 m

0,22 m 29845 lx1,0 m

0,33 m 13264 lx1,5 m

0,44 m 7461 lx2,0 m

0,66 m 3316 lx3,0 m

0,55 m 4775 lx2,5 m

I max 35w*= 28.800 Cd / I max 70w*= 47.400 Cd


0,18 m 49269 lx0,5 m

0,36 m 12317 lx1,0 m

0,53 m 5474 lx1,5 m

0,71 m 3079 lx2,0 m

1,07 m 1369 lx3,0 m

0,89 m 1971 lx2,5 m

I max 35w*= 11.900 / I max 70w*= 19.550 Cd


0,29 m 24656 lx0,5 m

0,58 m 6164 lx1,0 m

0,87 m 2740 lx1,5 m

1,15 m 1541 lx2,0 m

1,73 m 685 lx3,0 m

1,44 m 986 lx2,5 m

I max 35w*= 5.950 Cd / I max 70w*= 9.800 Cd


0,39 m 16512 lx0,5 m

0,78 m 4128 lx1,0 m

1,16 m 1835 lx1,5 m

1,55 m 1032 lx2,0 m

2,33 m 459 lx3,0 m

1,94 m 660 lx2,5 m

I max 35w*= 4.000 Cd / I max 70w*= 6.550 Cd

29

FIX

TU

RE

S

* Indicative power for comparison with metal halide fixtures

MINIMUM RANGE OF THE FOCAL LENGTH FOR 10 CONE OF LIGHTMAXIMUM RANGE OF THE FOCAL LENGTH FOR 40 CONE OF LIGHT

SPECIAL VARIATIONS: COLOUR RENDERING 90, COLOUR TEMPERATURE ON REQUEST, SINGLE-PHASE TERMINAL, COLOUR BLACK RAL 9005, COLOUR GREY RAL 7036Contact the Beghelli sales network

Zoom LED SmartDriver electronic reactor

Z135SD ZOOM LED BTRF 1X35W SD 3K 13 3000 80 17 9 1750 1400 84 A++ 1Z170SD ZOOM LED BTRF 1X70W SD 3K 29 3000 80 33 9 3200 2500 76 A++ 1Z1150SD ZOOM LED BTRF 1X150W SD 3K 47 3000 80 52 9 5000 4000 77 A++ 1


1x351x701x150

Vision radioModule

30

Zoom leD Mounting on ceiling, wall


Equivalent power* 35, 70, 150 W


Standard EN 60598-1, EN 60598-2-1, EN 60598-2-22 (fundamentalrequirements), EN 62471 (photobiological hazard)


Mountings wall, ceiling


Housing Die-cast aluminium, white RAL 9010

Lenses transparent PMMA

Louvre Zoom LED System





Adjustable focus projector made of die-cast aluminium whichintegrates the power of 9 high-efficiency LEDs. Patented optics,consisting of a system of variable focus PMMA lenses to adjust thebeam of light with an angle between 10 and 40. Adjustment iscontinuous and is obtained by a regulator on the rear. The fixture canbe oriented on both the horizontal and the vertical axis. With thebracket supplied it can be mounted on the wall or on the ceiling. TheZoom Led range has been designed specifically for accent lighting,where it is essential to enhance the items on display. Due to thisparticular feature it does not offer dimming with anAutoDimmer Sensor.

340

+180

35, 70, 150 W 240 195 53 1.4

Version Dimensions (mm) WeightL B H max kg

SPECIAL VARIATIONS: COLOUR RENDERING 90 - COLOUR TEMPERATURE ON REQUEST Contact the Beghelli sales network

650C

230V50HzIP40 IK05

20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE20111 VISION RADIO MODULE 3MT20112 VISION RADIO MODULE 6MT


SMARTDRIVER

SMARTREVOLUTION




DALI/0-10Vmodule

31

FIX

TU

RE

S


0,11 m 119379 lx0,5 m

0,22 m 29845 lx1,0 m

0,33 m 13264 lx1,5 m

0,44 m 7461 lx2,0 m

0,66 m 3316 lx3,0 m

0,55 m 4775 lx2,5 m

I max 35w*= 28.800 Cd / I max 70w*= 47.400 Cd


0,18 m 49269 lx0,5 m

0,36 m 12317 lx1,0 m

0,53 m 5474 lx1,5 m

0,71 m 3079 lx2,0 m

1,07 m 1369 lx3,0 m

0,89 m 1971 lx2,5 m

I max 35w*= 11.900 / I max 70w*= 19.550 Cd


0,29 m 24656 lx0,5 m

0,58 m 6164 lx1,0 m

0,87 m 2740 lx1,5 m

1,15 m 1541 lx2,0 m

1,73 m 685 lx3,0 m

1,44 m 986 lx2,5 m

I max 35w*= 5.950 Cd / I max 70w*= 9.800 Cd


0,39 m 16512 lx0,5 m

0,78 m 4128 lx1,0 m

1,16 m 1835 lx1,5 m

1,55 m 1032 lx2,0 m

2,33 m 459 lx3,0 m

1,94 m 660 lx2,5 m

I max 35w*= 4.000 Cd / I max 70w*= 6.550 Cd

MINIMUM RANGE OF THE FOCAL LENGTH FOR 10 CONE OF LIGHTMAXIMUM RANGE OF THE FOCAL LENGTH FOR 40 CONE OF LIGHT


Zoom LED SmartDriver electronic reactor

Z135ASD ZOOM LED AP 1X35W SD 3K 13 3000 80 17 9 1750 1400 84 A++ 1 Z170ASD ZOOM LED AP 1X70W SD 3K 29 3000 80 33 9 3200 2500 76 A++ 1Z1150ASD ZOOM LED AP 1X150W SD 3K 47 3000 80 52 9 5000 4000 77 A++ 1


1x351x701x150

Visionleradio modue

3232

33

FIX

TU

RE

S

33

Zoom LED on a three-phase electrified rail isthe typical installation for illuminating displayareas that vary periodically, such as shops,showrooms and exhibitions in general. Thetrack system allows rapid movement of thespotlight which, in turn, has variable focuswith a beam angle from 10 to 40.

D170/1150 - D226 LEDrecessed and ceiling

34

A revolutionary fixture that allowsgreat power of the light beamthanks to optics with controlled

refraction. An innovative Downlight also in itsmultifunctional aspect, to satisfy all

mounting necessities.Various accessories are available

for both recessed and ceilingmounting, with adapters that allowit to be integrated in existing holes

of various sizes.Not least is the heat dissipation

aspect, achieved with analuminium cooling system to allowperfect performance even in cases

of reduced recess space.

D170/1150 - D226 LEDrecessed and ceiling

35

FIX

TU

RE

S

36

D170/1150 leD Downlight




Standard EN 60598-1, EN 60598-2-2, EN 60598-2-22 (fundamentalrequirements), EN 62471


Mountings recessed, ceiling


Housing Die-cast aluminium RAL 9003 metal

Louvre sheet metal Dark light type UGR50.000/60.000 (L80B20)maintenance**



This revolutionary Downlight range sprang from the need to optimizelighting on the ground while reducing glare as much possible. Thepatented optical system consists of a primary louvre with very highreflectance and a secondary louvre for controlling glare, so it is alsosuitable in the presence of video terminals. The control gear isindependent of the fixture and is supplied already wired to the opticalcompartment, complete with cable ties.The particular diffusion of the heat of products with LED sourcesconsiderably reduces the overheating of the illuminated surfaces,thus ensuring greater environmental comfort and less impact on theilluminated objects. Together with the substantial absence of UVradiation, these features make the product particularly suitable forexhibition areas.An additional accessory is available for lighting the LED source of thedevice in the event of a black-out.

960CDARKLIGHT

230V50Hz

46

33

313

270

168

110

11

Electronic control gear

235

168

110

10

272

146

recessed version for holesfrom 170 to 200 mm

recessed version with adapter ring forholes from 200 to 240 mm

ceiling version

20090 ADAPTER RING 240 DWL LED20091 CEILING ACCESSORY DWL LED19364 INV LED IP65 AT/LG 123H 19365 INV LED IP65 LGFM 123H17210 INV LED IP65 SLGS SICURO 24V20098 WIDE DIFFUSER DWL/RL08 LED


Power* W Mounting Lamp Weight kg

150/70 recessed leD 1.9

150/70 ceiling leD 3.2

150/70 recessed with ring leD 2.2

IK05IP20 SLGS

20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15029 AUTODIMMER BOX SENSOR15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE20111 VISION RADIO MODULE 3MT20112 VISION RADIO MODULE 6MT


SMARTDRIVER

SMARTREVOLUTION

17210 INV LED IP65 SLGS SICURO 24V to be ordered separately

19364 INV LED IP65 AT/LG 123H to be ordered separately

19365 INV LED IP65 LGFM 123H to be ordered separately


EMERGENCY WITH INVERTER LED IP65/AUTORIPARA

D1150 LED SmartDriver electronic reactor

D1150SD DWL SPOT LED 1x150W INC SD 3K 47 3000 >80 52 24 6700 5500 106 A++ 1

LED Colour Colour Absorption N Flux of LEDs Flux of Luminous Energy Order Code Description Power K temperature rendering Max W LEDs lm (Tj=85C) Fixture lm efficiency lm/W class PackagingPower* W

150

37

FIX

TU

RE

S

RECESSED MOUNTING

20090 ADAPTER RING 240 DWL RL08 to be ordered separately

MOUNTING WITH ADAPTER RING

20091 CEILING ADAPTER FOR DWL RL08 to be ordered separately

CEILING MOUNTING

20098 to be ordered separately

WIDE DIFFUSER

Recess hole dimensions: 200240 mmRecess hole dimensions: 170200 mm

C0-C180 C90-C270

105

90

75

60

45

30

15 0 15

cd/klm

400

600

800

1200

Polar Diagram

SPECIAL VARIATIONS: COLOUR RENDERING 90COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network


IP65




70






DALI/0-10Vmodule

AutodimmerSensor

Vision radiomodule

AUTORIPARA SYSTEM:


270

168

110

11

272

146

recessed version for holes from170 to 200 mm

recessed version with adapter ring forholes from 200 to 240 mm

235

168

110

10

38

D226 leD Downlight




Standard EN 60598-1, EN 60598-2-2, EN 60598-2-22 (fundamentalrequirements), EN 62471


Mountings recessed, ceiling

Electronic gear SELV electronic SD (cos j 0.96) Electronic with intelligent dimming

Housing Die-cast aluminium

Louvre sheet metal parabolic




* Equivalent power for comparison with fluorescent tube fixtures** At a reference working temperature of 25C

Downlight with very high light output The optical system allowsmaximized illumination with excellent anti-glare features, so it is alsosuitable in the presence of video terminals. The control gear isindependent of the fixture and is supplied already wired to the opticalcompartment, complete with cable ties.The particular diffusion of the heat of products with LED sourcesconsiderably reduces the overheating of the illuminated surfaces,thus ensuring greater environmental comfort and less impact on theilluminated objects. Together with the substantial absence of UVradiation, these features make the product particularly suitable forexhibition areas.An additional accessory is available for lighting the source and theLEDs of the device in the event of a black-out.

960C

230V50Hz

ceiling version

46

33

313


20090 ADAPTER RING 240 DWL LED20091 CEILING ACCESSORY DWL LED19364 INV LED IP65 AT/LG 123H 19365 INV LED IP65 LGFM 123H 17210 INV LED IP65 SLGS SICURO 24V20098 WIDE DIFFUSER DWL/RL08 LED


Power* W Mounting Lamp Weight kg

2x26 recessed leD 1.9

2x26 ceiling leD 3.2

2x26 recessed with ring leD 2.2

IP20 SLGS

20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15029 AUTODIMMER BOX SENSOR15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE20111 VISION RADIO MODULE 3MT20112 VISION RADIO MODULE 6MT

Building automation modules to be ordered separately Order Code Description

SMARTDRIVER

SMARTREVOLUTION




DALI/0-10Vmodule

Autodimmersensor

39

FIX

TU

RE

S

20090 Adapter ring 240 DWL RL08 LED to be ordered separately

RECESSED MOUNTING WITH ADAPTER RING

20091 Ceiling accessory DWL LED to be ordered separately

CEILING MOUNTING

C0-C180 C90-C270

105

90

75

60

45

3015 0 15

cd/klm

300

200

500

Polar Diagram

SPECIAL VARIATIONS: COLOUR RENDERING 90 - COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network





2x26

RECESSED MOUNTING

20099 WIDE DIFFUSER DWL/RL08 LED

WIDE DIFFUSER

Recess hole dimensions: 170200 mm



Vision radiomodule






IP65

AUTORIPARA SYSTEM:


40

41

FIX

TU

RE

S

The recessed D170/1150 - D226 LED has areally minimal technological impact. The wideillumination area makes it suitable even forlarge spaces; with the appropriate adaptermodules it can be installed in existing holesfrom 170 to 240mm. In offices with thepresence of PC operators, it offers excellentanti-glare features (Darklight).

42

A fixture that springs from the needto highlight vertical surfaces

in interiors.Used in art exhibitions to cast an

accent light on the works on show,but also in retail outlets for directlylighting the goods or creating a

luminous backstage for displayed products.

A microprismatic anti-glare diffuserand above all a shape of the beamof light conceived to illuminate thewalls with maximum uniformity,thanks also to the tilting of the

diffuser which directs the light onlywhere it is needed.

43

FIX

TU

RE

S

WW135/170 LEDGreat uniformity of lighting

WW135/170 leDDownlight - wall washer




Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamentalrequirements), EN 62471



Mountings recessed in false ceilings

Electronic gear SELV electronic SD (cos j 0.96) Electronic with intelligent dimming

Housing Polyester powder coated die-castaluminium RAL 9003

Diffuser Toughened glass 3 mm thick


Luminous flux 50.000h (L80B20)maintenance**



Downlight for vertical surfaces. The optics allow maximized wallillumination while maintaining excellent anti-glare characteristicsthanks to the microprismatic diffuser. The louvre can be oriented onan axis. The control gear is independent of the fixture and issupplied already wired to the optical compartment, complete withcable ties.The particular diffusion of the heat of products with LED sourcesconsiderably reduces the overheating of the illuminated surfaces,thus ensuring greater environmental comfort and less impact on theilluminated objects. Together with the substantial absence of UVradiation, these features make the product particularly suitable forexhibition areas, both in retail outlets and in museums. Due to thisparticular feature it does not offer dimming with anAutoDimmer Sensor.An additional accessory is available for lighting the LED source of thedevice in the event of a black-out.

L

B

H

60

0

30

60

125

230

L

B

H

60

0

30

60

125

230

1x35 250 160 114 39 1.61x70 250 160 114 39 1.6

Power Dimensions (mm) Width WeightL B H beam max kg

44

960C

230V50HzIP20


20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE20111 VISION RADIO MODULE 3MT20112 VISION RADIO MODULE 6MT


19364 INV LED IP65 AT/LG 123H 19365 INV LED IP65 LGFM 123H 17210 INV LED IP65 SLGS SICURO 24V


SMARTDRIVER

SMARTREVOLUTION

46

33

313





DALI/0-10Vmodule

RECESSED MOUNTING


WW135/170 LED SmartDriver electronic reactor

WW135SD WW LED 1x35W OR INC SD 3K 18 3000 >80 23 72 2700 2250 100 A++ 1WW170SD WW LED 1x70W OR INC SD 3K 40 3000 >80 45 72 4900 4000 90 A++ 1


1x351x70

Prismatic diffuser glass with high transmittance allowing thereduction of glare while keeping the lighting efficiency unchanged.

45

FIX

TU

RE

S

Diagramma polare

Vision radiomodule






IP65

AUTORIPARA SYSTEM:


4646

WW135/170 LED for interiors ischaracterized by asymmetrical lighting for abetter distribution of light intensity on the wallthat is to be highlighted. The tilting systemallows lighting to be accentuated and to bedirected towards the floor.

47

FIX

TU

RE

S

47

D170/1150 LEDadjustable

tilting as much as 60

48

The best solution for accent lightingwithout three-phase tracks, withthe possibility of connecting the

Inverter LED to integrateemergency lighting. The fixture canbe fitted with a nocturnal LED lampwith lenticular optic, to be insertedin a special compartment in the

housing. Flexibility of use is anotherfocus of the project: the sameproduct has various optional

louvres to obtain different angles ofthe beam of light, varying from 16to 70. The whole combined with a

system that allows rotation in alldirections, with an ample angle oftilting the lighting compartment.

D170/1150 LEDadjustable

tilting as much as 60

49

FIX

TU

RE

S

50

D170/1150 leD adjustableDownlight



Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamentalrequirements), EN 62471


Protection grade IP44 optic compartment, IP20 housing


Mountings recessed in false ceilings


Louvre white PC with high reflectance (70supplied, 16, 24 and 40 mirrorfinished aluminium to be orderedseparately)

Diffuser Toughened glass 3 mm thick

Electronic gear SELV electronic SD (Cos 0.97)Electronic with intelligent dimming

MTBF Control gear** 65.000h

Luminous flux 50.000h (1x150W) (L80B20)maintenance** 60.000h (1x70W) (L80B20)



Die-cast aluminium spotlight with high-efficiency LED source, whitepowder coated. Power supply box separate from the fixture forgreater mounting flexibility and better heat dissipation. Quick couplingconnection terminal board. White louvre with very high reflectanceand complex geometry for a high light output (>97%), with highlytransparent toughened glass. Optics adjustable through 345 andtilting with maximum inclination 60.An additional accessory is available for lighting the LED source of thedevice in the event of a black-out and an optional nocturnal lamp withlenticular optic for maximizing lighting on the ground. The adjustableDWL LED has been designed specifically for retail lighting, where it isessential to enhance the items on display. Due to this particularfeature it does not offer dimming with an AutoDimmerSensor.


1233 LOUVRE 16 DWL OR1234 LOUVRE 24 DWL OR1235 LOUVRE 40 DWL OR19364 INV LED IP65 AT/LG 123H 19365 INV LED IP65 LGFM 123H 17210 INV LED IP65 SLGS SICURO 24V14120 CONTROL GEAR 5 LED14121 1 LED NOCTURNAL MODULE


IP44IP20650C

L

170

H

max

15

mm B

A

C

50 mm(150W)

210 mm (opzionale)

170 mm (standard)

50 mm

Power * Dimensions (mm) a Lamp WeightW L A B C H max max kg

1x70 233 45 302 30 150 60 leD cOB 2.3

1x150 233 45 302 30 150 60 leD cOB 2.3

RX08 LED adjustable SmartDriver electronic reactor

D170LORSD DWL LED 1x70W OR INC SD 3K 29 3000 >80 34 1 (COB) 4000 3400 100 A++ 1D1150LORSD DWL LED 1x150W OR INC SD 3K 50 3000 >80 55 1 (COB) 6500 5500 100 A++ 1


1x701x150

170 200

SLGS

SMARTDRIVER

SMARTREVOLUTION


20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE20111 VISION RADIO MODULE 3MT20112 VISION RADIO MODULE 6MT1237 SENSORE AUTODIMMER OR

46

33

313




Grande ESCO Italia module

DALI/0-10Vmodule

Autodimmersensor

Vision radiomodule

51

FIX

TU

RE

S

1233 Louvre 16 DWL OR to be ordered separately



LOUVRE 16, 24, 40

OPTICS ADJUSTABLE THROUGH 345 AND TILTING WITH MAXIMUM INCLINATION 60.



I max 70w*= 10.100 Cd / I max 150w*= 18.700 Cd

0,16 m 40338 lx0,5 m

0,32 m 10084 lx1,0 m

0,49 m 4482 lx1,5 m

0,65m 2521 lx2,0 m

0,81 m 1614 lx2,5 m

0,97 m 1120 lx3,0 m


I max 70w*= 10.100 Cd / I max 150w*= 18.700 Cd

0,20 m 40846 lx0,5 m

0,40 m 10212 lx1,0 m

0,59 m 4538 lx1,5 m

0,79m 2553 lx2,0 m

0,99 m 1634 lx2,5 m

1,19 m 1135 lx3,0 m


I max 70w*= 4.950 Cd / I max150w*= 9.150 Cd

0,34 m 19774 lx0,5 m

0,68 m 4944 lx1,0 m

1,02 m 2197 lx1,5 m

1,35 m 1236 lx2,0 m

1,70 m 791 lx2,5 m

2,04 m 549 lx3,0 m


I max 70w*= 2.200 Cd / I max 150w*= 4.100 Cd

0,65 m 8826 lx0,5 m

1,30 m 2207 lx1,0 m

1,95 m 981 lx1,5 m

2,60 m 552 lx2,0 m

3,25 m 353 lx2,5 m

3,90 m 245 lx3,0 m

OPTICS SUPPLIED

14121 1 LED NOCTURNAL MODULE to be ordered separately

14120 5 LED CONTROL GEAR to be ordered separately

MOUNTING WITH NOCTURNAL/EMERGENCY LAMP






IP65

AUTORIPARA SYSTEM:


52

The adjustable D170/1150 LED replacesnon adjustable traditional spotlights withholes from 170 to 200mm.

53

FIX

TU

RE

S

The fixture offers the dual possibility ofaccent and environmental lightingdepending on the extractable positioningand on the type of louvre installed, whichvaries the opening of the beam from 16to 70.

54

A louvre that combines versatility,sturdiness and superlativetechnical lighting features,

conceived for large structures withelevated installation heights.

The triple possibility of light diffusionmakes this a complete product inan industrial setting, solving themost varied lighting problemsthanks to optics of the latest

generation that focus on efficiencyand glare control.

The small dimensions of thehousing allow the easy passage ofoverhead cranes or other internalmoving stuctures: there are no

mounting limits.

H250/400 LEDMinimum bulk ceiling suspension

55

FIX

TU

RE

S

56

h250/400 leD Louvre


Equivalent power* 250, 400 W

Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamentalrequirements), EN 62471(Photobiological hazard), EN61493

Power supply 230Vac 10% 50 Hz176-276 Vdc




Housing Die-cast aluminium RAL 7040

Louvre Sheet metal with parabolic developmentin anti-iridescent, mirror finished,anodised aluminium, Wide,Concentrating, Ellipsoid

Diffuser Prismatic toughened glass 4mm



Luminous flux 50.000h (1x400W) (L80B20)maintenance** 60.000h (1x250W) (L80B20


* Equivalent power for comparison with metal halide fixtures** At a reference working temperature of 25C*** Per Versioni dimmerabili alimentate a corrente continua

rivolgersi alla rete vendita Beghelli

The H250/400 LED is a fixture of the latest generation able tocombine the advantages of the LED light source with state-of-the-artoptic systems, as regards both performance and flexibility ofapplication. The LED sources used, with very high efficiency, produceunprecedented lighting on the ground and allow mounting at heightsof more than 12 metres. The diffuser has an ample and uniform areaof emission, allowing very low luminosity and therefore reduced glarewith high visual comfort. The excellent mechanical characteristics(IP66-IK09) allow installation even in heavy-duty industrialenvironments. The fixture is available with three different optic modes:concentrating, wide and elliptical beam.Unlike traditional industrial louvre fixtures, the H250/400 LED ischaracterized by very compact dimensions, especially the height,which make it the ideal solution for sheds where there are overheadcranes or other moving structures. The fixture is designed to resistmagnetic disturbances typical of industrial environments (EN 61000-6-2). In the versions with dimming, to ensure maximum energysaving, self-adapting technology is used on the sensor integrated inthe fixture, to automatically adjust the emission of light according tothe reading of the natural light present on the work surface.A LED INVERTER is also available which transforms the fixture into anemergency fixture with SA function, to light a section of the LEDsource in the event of a black-out.The versions with intelligent dimming are enabled in the GrandeESCo Italia project

- Anti-vandal screws- Cable gland M20 with ventilation valve

Accessories suppliedOrder Code Description

19364 INV FULL LED IP65 LG 123H 19365 INV FULL LED IP65 LGFM 123H17210 INV LED IP65 SLGS SICURO 24V12658 PROTECTIVE GRID12659 ELECTRIFIED RAIL FIXING BRACKET12664 CEILING FIXING BRACKET12663 LOUVRE SUSPENSION CABLE


L

B

H

250 425 413 121 leD 1 7.7

400 425 413 121 leD 1 7.7

Power * Dimensions (mm) Lamp Packaging WeightW L B H max kg

20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE


SPECIAL VARIATIONS: COLOUR TEMPERATURE ON REQUEST Contact the Beghelli sales network

IK09 960CGGYM UV-OILIP66 SLGS

57

FIX

TU

RE

S


SUSPENDED MOUNTING

12664 Ceiling fixing bracket to be ordered separately

CEILING MOUNTING

12659 Electrified rail fixing bracket to be ordered separately

ON ELECTRIFIED RAIL

Elliptical opticWide optic Concentrating optic

H250/400 LED Electronic reactor

H250LED RIF LED 250W DIFF 4000K WIDE 116 4000 >80 127 256 17300 15000 118 A++ 1H400LED RIF LED 400W DIFF 4000K WIDE 214 4000 >80 230 512 30000 26000 113 A++ 1H250CLED RIF LED 250W CONC 4000K CONCENTRATING 116 4000 >80 127 256 17300 15000 118 A++ 1H400CLED RIF LED 400W CONC 4000K CONCENTRATING 214 4000 >80 230 512 30000 26000 113 A++ 1H250ELED RIF LED 250W ELLIT 4000K ELLIPTICAL 116 4000 >80 127 256 17300 15000 118 A++ 1H400ELED RIF LED 400W ELLIT 4000K ELLIPTICAL 214 4000 >80 230 512 30000 26000 113 A++ 1HD250LED RIF LED DIM 250W DIFF 4000K WIDE 116 4000 >80 127 256 17300 15000 118 A++ 1HD400LED RIF LED DIM 400W DIFF 4000K WIDE 214 4000 >80 230 512 30000 26000 113 A++ 1HD250CLED RIF LED DIM 250W CONC 4000K CONCENTRATING 116 4000 >80 127 256 17300 15000 118 A++ 1HD400CLED RIF LED DIM 400W CONC 4000K CONCENTRATING 214 4000 >80 230 512 30000 26000 113 A++ 1HD250ELED RIF LED DIM 250W ELLIT 4000K ELLIPTICAL 116 4000 >80 127 256 17300 15000 118 A++ 1HD400ELED RIF LED DIM 400W ELLIT 4000K ELLIPTICAL 214 4000 >80 230 512 30000 26000 113 A++ 1HDV250LED RIF LED DIM V 250W DIFF 4000K WIDE 116 4000 >80 127 256 17300 15000 118 A++ 1HDV400LED RIF LED DIM V 400W DIFF 4000K WIDE 214 4000 >80 230 512 30000 26000 113 A++ 1HDV250CLED RIF LED DIM 250W CONC 4000K CONCENTRATING 116 4000 >80 127 256 17300 15000 118 A++ 1HDV400CLED RIF LED DIM 400W CONC 4000K CONCENTRATING 214 4000 >80 230 512 30000 26000 113 A++ 1HDV250ELED RIF LED DIM 250W ELLIT 4000K ELLIPTICAL 116 4000 >80 127 256 17300 15000 118 A++ 1HDV400ELED RIF LED DIM 400W ELLIT 4000K ELLIPTICAL 214 4000 >80 230 512 30000 26000 113 A++ 1

LED Colour CRI Absorption N Flux of LEDs Flux of Luminous EnergyOrder Code Description Optics Power temperature K Max W LEDs lm (Tj=25C) Fixture lm efficiency lm/W class PackagingPower* W

250400250400250400250400250400250400250400250400250400

H250 Vision HDV250LED/CLED/ELED

H400 Vision HDV400LED/CLED/ELED

VERSION WITH VISION MODULE






IP65

AUTORIPARA SYSTEM:


58

H 250/400 LED on an electrified rail is a typicalinstallation in industrial environments, workshopand high-risk areas. Its particular distinctivefeatures are the reduced thickness, to replace thetraditional Bells, and high lighting on the groundwhich makes the concentrating versionparticularly suitable for installation a great heights.

59

FIX

TU

RE

S

60

A projector that combines design,sturdiness and superlativetechnical lighting features,

conceived for illuminating largeoutdoor areas. The dual possibility

of light diffusion offers totalcoverage in outdoor lighting,

solving the most complex lightingproblems thanks to optics of thelatest generation that focus onefficiency and glare control.The small dimensions of the

housing contrast with the depth ofthe beam of light which has no

limits of use.

F250/400 LEDWall or ground outdoors

61

FIX

TU

RE

S

62

F250/400 leD Louvres







Mountings on the ground, wall, spotlight towers

Housing Die-cast aluminium RAL 7040

Louvre Sheet metal with parabolic developmentin anti-iridescent, mirror finished,anodised aluminium. SymmetricalAsymmetrical




Luminous flux 50.000h (1x150W)maintenance** 60.000h (1x700W) (L80B20)


* Equivalent power for comparison with metal halide fixtures** At a reference working temperature of 25C*** Per Versioni dimmerabili alimentate a corrente continua

rivolgersi alla rete vendita Beghelli

The F250/F400 LED is a fixture of the latest generation able tocombine the advantages of the LED light source with state-of-the-artoptic systems, as regards both performance and flexibility ofapplication. The LED sources used, with very high efficiency, produceunprecedented lighting that allows the illumination of building faadesor hardstands, even at considerable distance. The diffuser has anample and uniform area of emission, allowing very low luminosity andtherefore reduced glare with high visual comfort. The excellentmechanical characteristics (IP66-IK09) allow installation in outdoorsettings even in extreme conditions, while the possibility of versionswith a symmetrical or asymmetrical beam makes the fixtureparticularly versatile.The square cut design of the F250/F400 LED allows movementsthrough 360, on the axis of rotation of the goniometric bracket, thusenabling great flexibility of movement and mounting.In the versions with intelligent dimming, to ensure maximum energysaving, self-adapting technology is used on the sensor integrated inthe fixture, to automatically adjust the emission of light according tothe reading of the natural light present on the work surface.A LED INVERTER is also available which transforms the fixture into anemergency fixture with SA function, to light a section of the LEDsource in the event of a black-out.The versions with intelligent dimming are enabled in the GrandeESCo Italia project

- Anti-vandal screws- Goniometric bracket- Cable gland M20 with ventilation valve

Accessories suppliedOrder Code Description

19364 INV FULL LED IP65 LG 123H 19365 INV FULL LED IP65 LGFM 123H17210 INV LED IP65 SLGS SICURO 24V12660 ADAPT L POST HEAD12661 POST HEAD 2x 60-7612662 POST HEAD 4x 60-7612658 PROTECTIVE GRID


L

B

H

250 438 434 121 leD 1 8.8

400 438 434 121 leD 1 8.8

Power * Dimensions (mm) Lamp Packaging WeightW L B H max kg

20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE


SPECIAL VARIATIONS: COLOUR TEMPERATURE ON REQUEST Contact the Beghelli sales network

IK09 960CGGYM UV-OILIP66 SLGS

63

FIX

TU

RE

S

WALL MOUNTINGGROUND MOUNTING

12658 Protective grid

PROTECTIVE GRID

-

PROTECTIVE GRID

12661 POST HEAD 2x 60-76 to be ordered separately

12662 POST HEAD 4x 60-76 to be ordered separately

POST MOUNTING


F250/400 LED Electronic / dimmable electonic reactor

F250SLED PRO LED 250W SM 4000K SYMMETRICAL 116 4000 >80 127 256 17300 15000 118 A++ 1F400SLED PRO LED 400W SM 4000K SYMMETRICAL 214 4000 >80 230 512 30000 26000 113 A++ 1F250ALED PRO LED 250W AS 4000K ASYMMETRICAL 116 4000 >80 127 256 17300 15000 118 A++ 1F400ALED PRO LED 400W AS 4000K ASYMMETRICAL 214 4000 >80 230 512 30000 26000 113 A++ 1FD250SLED PRO LED DIM 250W SM 4000K SYMMETRICAL 116 4000 >80 127 256 17300 15000 118 A++ 1FD400SLED PRO LED DIM 400W SM 4000K SYMMETRICAL 214 4000 >80 230 512 30000 26000 113 A++ 1FD250ALED PRO LED DIM 250W AS 4000K ASYMMETRICAL 116 4000 >80 127 256 17300 15000 118 A++ 1FD400ALED PRO LED DIM 400W AS 4000K ASYMMETRICAL 214 4000 >80 230 512 30000 26000 113 A++ 1FDV250SLED PRO LED DIM VIS 250W SM 4000K SYMMETRICAL 116 4000 >80 127 256 17300 15000 118 A++ 1FDV400SLED PRO LED DIM VIS 400W SM 4000K SYMMETRICAL 214 4000 >80 230 512 30000 26000 113 A++ 1FDV250ALED PRO LED DIM VIS 250W AS 4000K ASYMMETRICAL 116 4000 >80 127 256 17300 15000 118 A++ 1FDV400ALED PRO LED DIM VIS 400W AS 4000K ASYMMETRICAL 214 4000 >80 230 512 30000 26000 113 A++ 1

LED Colour CRI Absorption N Flux of LEDs Flux of Luminous EnergyOrder Code Description Optics Power temperature K Max W LEDs lm (Tj=25C) Fixture lm efficiency lm/W class PackagingPower* W

250400250400250400250400250400250400

Symmetrical optic Asymmetrical optic






IP65

AUTORIPARA SYSTEM:


F250 Vision FDV250SLED, FDV250ALED

F400 Vision FDV400SLED, FDV400ALED

VERSION WITH VISION MODULE

64

65

FIX

TU

RE

S

F250/400 LED Floodlight has a practicaladjustable bracket that allows mountingon the wall or on the ground. Thepossibility of an asymmetrical optic, withvery high illumination, makes it particularlysuitable for the illumination of largeindustrial faades.

66

A single polyvalent fixture for useeither as a projector or a louvre,

combining design, sturdiness andsuperlative technical lighting

features. The dual possibility ofsymmetrical and asymmetrical lightdiffusion is embodied in the sameproduct and is achieved thanks toa louvre with divisible modules. A

single fixture to achieve totalcoverage in outdoor lighting,

solving the most varied technicallighting problems thanks to an

innovative optical project based onefficiency and glare control.The small dimensions of the

housing contrast with the depth ofthe beam of light which has no

limits of use.

FH 70/150 LEDWall or ground outdoors

67

FIX

TU

RE

S

68

Fh 70/150 leD Projectors / Louvres





Protection grade IP66, IK09


Mountings on the ground, wall, spotlight towers,suspension


Louvre Sheet metal with parabolic developmentin anti-iridescent, mirror finished,anodised aluminium. SymmetricalAsymmetrical


Electronic gear SELV electronic SD (Cos 0.97) with intelligent dimming


Luminous flux 60.000h (L80B20)maintenance**



The FH 70/150 LED is a fixture of the latest generation able tocombine the advantages of the LED light source with state-of-the-artoptic systems, as regards both performance and flexibility ofapplication. The LED sources used, with very high efficiency, produceunprecedented lighting that allows the illumination of building faadesor hardstands, even at considerable distance. The diffuser has anample and uniform area of emission, allowing very low luminosity andtherefore reduced glare with high visual comfort. The excellentmechanical characteristics (IP66-IK09) allow installation in outdoorsettings even in extreme conditions, while the possibility of versionswith a symmetrical or asymmetrical beam makes the fixtureparticularly versatile.The square cut design of the FH 70/150 LED allows movementsthrough 360, on the axis of rotation of the goniometric bracket, thusenabling great flexibility of movement and mounting.Thanks to the Autodimmer Sensor accessory, the fixture works withintelligent dimming. To ensure maximum energy saving, self-adaptingtechnology is used on the sensor integrated in the fixture, toautomatically adjust the emission of light according to the reading ofthe natural light present on the work surface.A LED INVERTER is also available which transforms the fixture into anemergency fixture with SA function, to light a section of the LEDsource in the event of a black-out.Louvre with a controlled beam to opt

SYMBOLS - Beghelli Hungary - Biztonsági világítás ...beghelli.hu/INS/825116000_illum.pdf · EN...

Documents

Transcript of SYMBOLS - Beghelli Hungary - Biztonsági világítás ...beghelli.hu/INS/825116000_illum.pdf · EN...