Garment makers & consumers have very high expectationThe seam must meet a multiplicity of requirements. Consequently, the requirements of the garment makers and the sewing industry are high on the thread used to make seams. Production of seam must be quick & flawless, it must withstand mechanical stress & it must meet the aesthetic & up-to-date fashion expectations of consumers. They can fully unfold their capabilities when they are brought up to peak performance by “Sylast series” of Sewing Thread Lubricants:

A lot is expected of

sewing thread

Embroidery yarn should

shine & embellish

Robust Sewing process are

crucialIt is important that seamstresses like working with your thread

Thread must be gentle on the skin

A seam must hold & look

good

Sewing thread lubricants for exhaust method & lick roll application

LNCI offers a complete range of sewing thread lubricants that are suitable for use with all

application techniques:

Exhaust Method Lick Roll Method / Dosing pump

Constant Concentration along bobbin cross section

Temperature

Liquor flow

pH control

Pumping cycles

Residence time

Yield

Rinsed Yarn

BufferSoda

Sylast Series

8 mins8 mins

25ºC

2ºC/min

60-70ºC

Draining

8 mins

pH measurement: 7.0-7.5(As indicated in the technical leaflet)

Pumping cycle(Alternating):3 min inside-outside5 min outside-inside

Sylast LubricantsSuperior performance in your exhaust process:

The lubrication is initiated by pH adjustment and temperature raise. The lubricant droplets grow together and form a homogeneous film on the surface of the thread. Sylast-Series helps to make exhaust process quick, simple & complete

Sylast film

Sylast lubricants for lick roll application have been optimized to wet the lick roll with a uniform thin layer. When the thread comes into contact with this layer, the lubricant is transferred to the thread and spread out forming a homogeneous film on the surface of the thread. 

Sylast series range includes lubricants that are formulated to give optimum performance in dosing pump application. They fully cover the thread forming a uniform lubricant film. They are so stable that very little contamination builds up in the machine. This reduces cleaning costs & idle time to a minimum

Normal lubricants often create a non-homogeneous layer, resulting in

insufficient smoothness of the thread. With Sylast Series you get a

homogeneous lubrication. Regardless of whether you use the exhaust

process, a kiss-roll or dosing pump, the lubrication result in perfect in all

respects.

Without antistatic agents, a very high static charge builds up on thread

during sewing. Threads do not run smoothly, and this inevitably results in

poor sewing & poor seam quality.

Standard lubricants hardly reduce friction on thread, & they are a significant factor in needle overheating without heat protection, sewing thread made of synthetic fiber will melt. This weakens the thread, leading to crust formation at needle. The result is thread breakage and limits on stitch frequency. Sewing thread treated with Sylast lubricant glides smoothly into the fabric. It provides heat protection for threads made of synthetic fiber. With Sylast you can sew at high speeds without the risk of thread breakage.

In the sewing industry, there often is not enough time to adjust sewing machine parameters to exactly match the sewing thread & the fabric. The consequences, for example when working with thin or smooth materials, are often fatal-crinkled seams & frustrated seamstresses.

Standard lubricants have narrow application window , & this often leads to problems in sewing process.

LNCI optimizes thread lubricants for a wide application window, so that critical seams can be placed more easily even when conditions are not optimal.

LNCI optimizes thread lubricants for a wide application window

Standard lubricants have narrow application window

Customer benefits during production of sewing thread:Optimal formulation for exhaust, kiss-roll and dosing pump.

Simple, reliable lubrication.

 Homogeneous solid add-on along the bobbin cross-section during the exhaust process.

Perfect results during application with kiss-roll or dosing pump.

 Nearly no influence on tensile strength.

Stable emulsions, even under extreme conditions.

 No influence on rubbing or colour fastness.

100% exhaustion.

Customer benefits during sewing:Good gliding and minimal friction for easy sewing.

Constant friction values for constant sewing parameters.

Antistatic properties for optimal running behaviour.Effective heat protection prevents thread melting & formation of deposits on the needle.

No corrosion on machine parts.

Non-critical when stitch frequencies vary significantly.Constant thread characteristics even under extreme climatic conditions.

Constant seam thickness.Wide application window, even when technical sewing conditions are unfavorable.

Fast, productive sewing with no thread breakage.

Reduced reject rate.

Satisfied seamstresses.

Productive, efficient sewing operations.

Disadvantage of hard waxing :oIrregular take-up

oPoor reproducibility

oNo constant friction

oHigh static charge

oLoss of paraffin during storage

oParaffin deposits

oLow winding speed

oYarn breakage

oUnsteady fibre run.

Wet waxing with “Sylast” is the technology of choice

Sylast Oil in water Inducing lubricant Yarn coating emulsion film formation Completed

Lubricant Water growing together of Sylast lubricant Water lubricant droplets film

Ordinary two step process:

2nd stepHard-waxing

Dyeing

Softening + Wet-waxing

Combo-Process with Sylast:

Wet-waxing and softening in the dyeing unit,

directly after the dyeing process.

Ingeniously simple” One pot process”

Good sliding properties & soft handle through

finishing at yarn level.

Excellent results & lower costs.

For all types of yarn.

For practically all applications such as socks, over

wear, body wear etc.

Technical benefits:

Extremely thin & homogeneous coating of the yarn with high-performance lubricant. Greatly reduced friction, abrasion & static charge.Constant coefficients of friction in every speed range.

Operational benefits:

Simplest handling No intermediate steps, directly after dyeingLittle fibre fly & no deposits on the processing machines

Efficient:

Economical due to practically 100% yield Cost saving through simplification of process flow Environment- friendly because next to nothing remains in the liquor

LNCI Thread Lubricants

Wet Waxing/ Softening of knitting, warp knitting &

weaving yarns

Sewing Thread

Lubricants

Lick Roll / Metering

Pump

Exhaust Method

Exhaust Method

Paraffin Basis/Polyethyl

ene

Paraffin Basis/

SoftenerNon-aqueous

lubricants

Aqueous Lubricant

s

Sylast-DCSylast-HMT(hotmelt)Sylast-TLNASylast-GL

Sylast-DSWS

Sylast-PSWProfinish-

LDS

Sylast-BASylast-

OVG

Sylast-GTProfinish-

OEProfinish-

YXProfinish-

NPF

Profinish-LAN

LNCI Range of Lubricants:Sylast-DC: Non aqueous lubricant for all kind of sewing threads & embroidery yarns. Best sewing performance on text. PES threads. Blend of silicones & additives.

Sylast-HMT(hotmelt) : Hot melt lubricant for all kind of sewing threads & embroidery yarns. Application temperature 60-80ºC, good handling / pourable. 100% active blend of silicones, waxes & additives. Excellent sewing performance.

Sylast-TLNA: 100% active lubricant based on silicone, waxes & additives. Suitable for all kind of sewing threads & embroidery yarns. For the cold lick roll application.

Sylast-GL: Wet waxing agent for yarns. Excellent low friction on CO yarn, even distribution over the bobbin cross section.

Sylast-DSWS: A ready-to-use, fully-formulated, new generation polysiloxanebased product, designed for application as sewing thread finish.

Sylast-NSW: A ready-to-use, fully-formulated, new generation polysiloxanebased product, designed for application as sewing thread finish.

Sylast-BA: Is developed as a specialty product for exhaust application as yarn lubrication. Sylast BA confers to the knitting yarns the gliding properties required for further processing. The product is applied in a fresh bath after bleaching or dyeing of the yarns

Sylast-OVG: Lubricant for all kind of sewing threads & embroidery yarns. Excellent sewing performances, good antistatic properties, high exhaustion rate, minimum waste of water-maximum economy.

Sylast-GT: Is developed as a combination of softeners & smoothing agents. Its range of application extends from top back-washing or dyeing machine to yarn & piece good finishing. It reduces fiber-to-fiber & fiber-to-metal friction. Avoid sewing damage to tailored goods. Softener for re-beaming of indigo dyed yarns. It improves the running properties when used as a finish for tops, weaving yarns & embroidery yarns.

Profinish-OE: Softening agent to improve sewability. For cellulosic's, wool and blends of these fibres with synthetics. Improves sewability, especially of open-end yarns. Improves the elasticity of knitted fabrics. Extremely smooth, silky handle. Suitable for jet application. Low foaming

LNCI Range of Lubricants(Contd):

Profinish-YX: A proprietary blend of waxes & speciality modified fatty amidederivatives that has been specially designed to give good lubrication and soft handle on yarns.

Profinish-NPF: Wet waxing and softening agent For the finishing of yarns made of synthetic fibres, wool and blends of these; also suitable for cellulosic fibres.Low concentrations give extremely smooth yarns.High yield from long liquors.Good abrasion resistance & antistatic properties.

Profinish-LAN: 40% active cationic dispersion of waxes & softeners. Lubricant for 100% cotton sewing threads. Lubricant free of silicone.

LNCI Range of Lubricants(Contd):

L.N.Chemical IndustriesL.N.Chemical Industries

OFFICE ADDRESS :-403, “Antariksh”, Makwana Road,Marol Naka,Andheri (E), Mumbai – 400 059

Tel.- 91- 22- 4221 6789 (30 Lines) 91- 22- 6692 4112Fax -91-22- 2836 6434

Email ID – ketan@lnchem.in lnchem@vsnl.com

FACTORY ADDRESS :-D- 14 /10, T.T.C. M.I.D.C Industrial area,Turbhe , P.O.K.U.Bazar,Navi Mumbai – 400 705

Tel.-91- 22- 4141 9899 (30 Lines)Fax -91- 22- 4141 9888