SY Series Scotch Yoke Actuators - Industrial Valves … · The Pratt Industrial SY series scotch...
Transcript of SY Series Scotch Yoke Actuators - Industrial Valves … · The Pratt Industrial SY series scotch...
SY Series Scotch Yoke
Actuators
Engineering Creative Solutions for Fluid Systems Since 1901
MODULAR DESIGNThe Pratt Industrial SY series scotch yoke actuator has a highly efficient and interchangeable modular design (air cylinder, power drive, spring pack, and override module) providing for easy field modification and serviceability.
NAMUR MOUNTINGNAMUR VDI/VDE 3845 dimensional standard on all sizes. No special blocks or hardware required to mount solenoid valves, limit switches, or positioners.
DEGREE OF TRAVELEach SY actuator has been engineered with bidirectional travel stops which allow for total travel adjustment between 80° and 100°.
ISO MOUNTINGDesigned in accordance to the ISO 5211 dimensional and torque range specification for easy and cost effective automated valve assemblies.
All critical-to-operation bearings have been designed with self-lubrication allowing for maximum energy transfer directly to the valve stem. The pre-compressed spring pack minimizes radial loads on the piston rod and increases the service life and durability of the actuator. Replaceable bearings protect all sliding and rotating components for maximum life.
SELF-LUBRICATINGAll SY series actuators have been designed to be completely self-lubricating, requiring no further lubrication, ensuring maximum wear resistance and long cycle life.
QUALITY ASSURANCE100% of all units are factory pressure tested, no-leak verified, and torque performance guaranteed prior to shipment.
WATERTIGHT DESIGNO-rings are sized to exact specifications creating a watertight design.
SAFETY LOCKEach SY series actuator has been engineered with safety as its highest priority. The SY series actuator features a specially designed safety lock mechanism so that the spring module can only be removed from the power module when the spring is fully decompressed. This important safety feature prevents accidental release of spring tension. The spring lock mechanism safely retains the spring module under load, and prevents the module from being removed when the actuator is under load conditions.
INTEGRAL CHECK VALVEAn integral check valve is incorporated into the design of the SY series actuator to prevent over pressurizing and foreign material from getting inside the unit. This prevents premature break down and increases the life of the actuator.
POWER YOKE DESIGNEach scotch yoke power mechanism has been precisely machined to exact tolerances and fitted with high quality, self-lubricating bearings, piston rod, and guide block for high efficiency energy transmission, smooth operation, and trouble-free service.
HYDRAULIC OVERRIDEThe SY series offers a hydraulic override cylinder module on all spring return models. This important feature does not increase the overall length of the body.
CORROSION RESISTANCEEach unit comes standard with a minimum of three progressive stages of internal and external coating for corrosion resistance. The inner lining of the cylinder wall is coated with infused PTFE, thereby enhancing internal corrosion resistance and self-lubrication.
HANDLINGThe SY series actuators come with easy to handle eye bolts which make for ease of lifting and transporting.
Please call for further details.
HIGH CYCLE BEARINGS
FEATURES
2 I Pratt Industrial
DRAWING & PARTS LIST
Operating Temperatures–4˚F to 176˚F–40˚F to 176˚F
Standard Temperature Low Temperature High Temperature –4˚F to 300˚F
Operating Pressure Pneumatic Hydraulic
40 PSI to 100 PSI 1450 PSI
Items listed in red are included in the repair kit.
22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
21 20 19 18 17 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Item Description Materials Item Description Materials
1 Body Ductile Iron 22
2 Vent Valve WCB 233 Rod Slide Bearing WCB + TFE 244 Adjusting Rod Steel Alloy 25
5 Adjusting Rod Nut 2H 266 Yoke WCB 277 Spring Housing WCB 28
8 Yoke Slide Bearing WCB + TFE 299 Spring Housing Steel Alloy 3010 Tension Rod Steel Alloy 31
11 Spring Seat WCB 3212 Yoke Slide Bearing Nut 2H 3313 Pivot Slide Bearing WCB + TFE 3414 Hydraulic Cylinder WCB 3515 Hydraulic Piston WCB 3616 Adapter Ductile Iron 3717 Cylinder BUNA-N O-Ring Seal BUNA-N 38
18 Yoke Slide Bearing Nut 2H 3919 Cylinder WCB 4020 Cylinder End Cap Ductile Iron 4121 Cylinder End Cap Nut 2H 42
Rod BUNA-N O-Ring Seals
Screw
Piston Guide RingPiston BUNA-N O-Ring Seal
Piston
Center Cylinder Bar
Center Cylinder Bar O-Ring Seal
Stud
Stud Nut
Sliding Bearing
Bolt
Body Cap
Bolt
Cover
Drive Shaft
Roller
Sliding Bearing
Pin
Guide Block
Guide Block Nut
Spring Housing Cover Plate
BUNA-N
Steel Alloy
TFEBUNA-N
Ductile Iron
Steel Alloy
BUNA-N
Steel Alloy
2H
WCB + PTFE
WCB
Ductile Iron
WCB
Ductile Iron
Steel Alloy
Steel Alloy
WCB + PTFE
Steel Alloy
Ductile Iron
WCB
WCB
Pratt Industrial I 3
TORQUE RANGE
DOUBLE ACTING SPRING RETURN
7350 in-lbs to 2,003,810 in-lbs2700 in-lbs to 635,070 in-lbs
Tor
que
125
100
75
50
25
Spring Break
AirBreak
AirStroke
Spring Stroke
AirEnd
Spring End
Tor
que
125
100
75
50
25
0˚ 45˚ 90˚
Break Torque
Running Torque
0˚ 45˚ 90˚
DOUBLE ACTINGSPRING RETURN
MECHANICAL OPERATION AND SIZING CONSIDERATIONS
The Scotch Yoke is a mechanism designed for converting linear force into rotation torque, usually at higher torque outputs than other conventional mechanical devices. The piston and spring mechanisms are directly coupled to a sliding yoke and pin device that provides for the transmission of power in a highly reliable and smooth operation. This type of mechanical device provides for the highest torque outputs to be generated at the beginning and
ending of the stroke cycle, and at decreasing speeds during the most critical point in the cycle; unseating and seating valves at their opening and closing phases. This design allows for the most desirable and efficient use of energy in large valve applications.
When sizing scotch yoke actuators, it is important to take into consideration the following:••••••
Type of application desired (double acting or spring return service) Proper determination of the ‘sizing torque'Understanding of the valve type and operation (ball, butterfly, plug, etc.)Knowledge of the related process media (oil, water, gas, powders, etc.)Review of minimum and maximum operational temperatures and pressures of the line media Consideration of environmental conditions which may affect the installationFinally, a safety and regulation review to ensure all aspects of the operation are compliant•
4 I Pratt Industrial
DO
UB
LE
AC
TIN
G T
OR
QU
E C
HA
RT
Model N
o.
Weig
ht
(lbs.)
Max D
rive4
3.5
PS
I (3 B
ar)T
orq
ue
Start
Run
58
.0 P
SI (4
Bar)
Start
Run
72
.5 P
SI (5
Bar)
Start
Run
87
PS
I (6 B
ar)S
tartR
un
Start
Run
SY
14
-DA
-20
-F14
12
5
17
,70
0
7,3
46
4,4
61
9,7
98
5,9
48
12
,24
97
,42
61
4,6
92
8,9
13
17
,14
41
0,4
00
SY
14
-DA
-25
-F14
15
21
1,4
88
6,9
66
15
,31
29
,28
41
9,1
44
11
,61
2-
--
-
SY
14
-DA
-30
-F14
19
11
6,4
71
9,9
92
--
--
--
--
SY
16
-DA
-25
-F16
19
6
35
,40
0
14
,35
68
,70
91
9,1
44
11
,61
22
3,9
32
14
,51
52
8,7
21
17
,41
83
3,5
09
20
,32
1
SY
16
-DA
-30
-F16
23
82
0,6
75
12
,54
22
7,5
70
16
,71
93
4,4
65
20
,90
5-
--
-
SY
16
-DA
-35
-F16
28
42
8,1
45
17
,07
33
7,5
27
22
,76
4-
--
--
-
SY
25
-DA
-35
-F25
34
8
70
,80
0
34
,74
82
1,0
74
46
,33
42
8,1
01
57
,91
03
5,1
29
69
,49
64
2,1
56
--
SY
25
-DA
-40
-F25
44
44
4,1
12
26
,75
65
8,8
22
35
,67
77
3,5
23
44
,59
9-
--
-
SY
25
-DA
-45
-F25
49
15
5,8
39
33
,87
27
4,4
53
45
,16
5-
--
--
-
SY
30
-DA
-45
-F30
62
7
14
1,6
00
68
,23
94
1,3
95
90
,98
65
5,1
93
11
3,7
32
68
,99
21
36
,47
98
2,7
90
--
SY
30
-DA
-50
-F30
71
58
4,2
50
51
,10
41
12
,34
36
8,1
51
14
0,4
26
85
,18
8-
--
-
SY
30
-DA
-55
-F30
77
21
01
,95
26
1,8
49
13
5,9
39
82
,46
2-
--
--
-
SY
35
-DA
-55
-F35
93
9
28
3,2
00
12
9,7
52
78
,71
01
73
,00
61
04
,95
22
16
,25
01
31
,18
62
59
,50
41
57
,42
83
02
,75
81
83
,67
1
15
4,4
19
93
,67
62
05
,89
51
24
,90
22
57
,36
21
56
,12
73
08
,83
81
87
,36
2-
-
21
0,1
88
12
7,5
13
28
0,2
50
17
0,0
14
--
--
--
55
7,5
96
--
--
31
2,5
20
18
9,5
92
37
5,0
33
22
7,5
17
43
7,5
37
26
5,4
34
--
34
0,3
02
20
6,4
44
42
5,3
85
25
8,0
61
51
0,4
58
30
9,6
70
59
5,5
32
36
1,2
88
33
3,3
55
26
7,9
56
44
4,4
76
35
7,2
69
55
5,5
97
44
6,5
91
--
--
1,1
06
,34
0
--
--
65
3,6
46
39
6,5
40
78
4,3
80
47
5,8
52
91
5,1
06
55
5,1
63
--
66
1,8
15
40
1,4
97
82
7,2
62
50
1,8
91
99
2,7
18
60
2,2
40
1,1
58
,17
47
02
,61
7
61
2,7
99
37
1,7
58
81
7,0
66
49
5,6
95
1,0
21
,33
26
19
,60
6-
--
-
2,2
12
,68
5
--
--
--
1,0
58
,91
36
42
,40
51
,23
5,3
97
74
9,4
73
--
89
3,4
57
54
2,0
29
1,1
16
,81
46
77
,53
41
,34
0,1
81
81
3,0
39
1,5
63
,54
79
48
,54
4
82
7,2
71
50
1,8
73
1,1
03
,03
46
69
,17
01
,37
8,7
88
83
6,4
58
1,6
54
,55
01
,00
3,7
55
1,9
30
,30
41
,17
1,0
43
SY
35
-DA
-60
-F35
10
19
SY
35
-DA
-70
-F35
11
92
SY
40
-DA
-60
-F40
13
99
SY
40
-DA
-70
-F40
15
91
SY
40
-DA
-80
-F40
18
52
SY
48
-DA
-80
-F48
23
61
SY
48
-DA
-90
-F48
29
37
SY
48
-DA
-10
0-F4
83
43
2
SY
60
-DA
-80
-F60
37
07
SY
60
-DA
-90
-F60
43
34
SY
60
-DA
-10
0-F6
04
86
2
SY
60
-DA
-11
0-F6
05
52
21
,00
0,9
93
60
7,2
68
1,3
34
,66
78
09
,69
31
,66
8,3
31
1,0
12
,11
92
,00
1,9
95
1,2
14
,58
02
,33
5,6
60
1,4
16,9
61
Units: in
–lb
s
10
1.5
PS
I (7 B
ar)
Pratt Industrial I 5
SP
RIN
G
RE
TU
RN
T
OR
QU
E
CH
AR
T
4 B
AR (5
8.0
PSI) A
ir Supply S
pring Return T
orque Sheet
Units: in
–lb
s
Model N
o.
Weig
ht
(lbs.)
Air S
upply
Pressu
reM
ax Drive T
orq
ue
Sprin
g S
tartS
prin
g E
nd
Air S
tartA
ir End
25
71
7,7
00
6,0
10
3,8
59
5,9
39
3,7
88
34
39
,55
05
,96
59
,34
65
,76
24
00
13
,07
38
,39
11
3,6
66
8,9
84
40
53
5,4
00
11
,33
87
,24
01
1,9
04
7,8
06
46
01
6,7
81
10
,86
01
6,7
10
10
,78
95
90
22
,96
81
4,4
18
23
,10
91
4,5
59
69
57
0,8
00
26
,51
71
6,7
72
28
,26
01
8,5
16
78
13
5,0
49
22
,42
83
6,3
94
23
,77
38
49
43
,85
52
6,5
43
47
,90
03
0,5
88
11
75
14
1,6
00
56
,01
63
3,8
10
57
,18
53
4,9
78
13
40
70
,17
84
3,0
94
69
,24
84
2,1
56
16
68
82
,97
65
1,5
47
84
,38
35
2,9
54
21
93
28
3,2
00
10
8,8
38
66
,21
21
06
,79
36
4,1
68
24
24
12
7,8
84
78
,83
41
27
,06
17
8,0
02
28
82
16
8,7
75
10
2,2
17
17
8,0
24
11
1,4
66
27
06
55
7,5
96
14
4,7
89
90
,91
51
59
,10
11
05
,21
83
12
41
89
,63
61
20
,95
42
19
,33
91
50
,66
64
10
32
65
,65
51
66
,01
42
78
,45
31
78
,81
25
14
81
,10
6,3
40
29
9,5
45
18
4,3
35
33
8,5
77
22
3,3
66
61
95
40
5,2
67
25
7,5
30
40
4,2
76
25
6,5
48
74
36
50
7,5
73
31
1,5
46
50
5,5
11
30
9,4
93
69
74
2,2
12
,68
5
41
7,0
30
24
6,4
23
45
9,5
13
28
8,9
06
81
80
56
1,1
20
33
8,6
39
55
4,8
09
33
2,3
28
93
06
69
8,1
29
43
5,6
07
66
7,4
26
40
4,8
95
SY
14
-SR
4-2
0-F1
4S
Y1
4-S
R4
-25
-F14
SY
14
-SR
4-3
0-F1
4S
Y1
6-S
R4
-25
-F16
SY
16
-SR
4-3
0-F1
6S
Y1
6-S
R4
-35
-F16
SY
25
-SR
4-3
5-F2
5S
Y2
5-S
R4
-40
-F25
SY
25
-SR
4-4
5-F2
5S
Y3
0-S
R4
-45
-F30
SY
30
-SR
4-5
0-F3
0S
Y3
0-S
R4
-55
-F30
SY
35
-SR
4-5
5-F3
5S
Y3
5-S
R4
-60
-F35
SY
35
-SR
4-7
0-F3
5S
Y4
0-S
R4
-60
-F40
SY
40
-SR
4-7
0-F4
0S
Y4
0-S
R4
-80
-F40
SY
48
-SR
4-8
0-F4
8S
Y4
8-S
R4
-90
-F48
SY
48
-SR
4-1
00
-F48
SY
60
-SR
4-8
0-F6
0S
Y6
0-S
R4
-90
-F60
SY
60
-SR
4-1
00
-F60
SY
60
-SR
4-1
10
-F60
10
86
8
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
4 B
AR
(58
.0 P
SI)
84
8,7
07
51
4,9
10
81
9,7
56
48
5,9
59
6 I Pratt Industrial
SP
RIN
G R
ET
UR
N T
OR
QU
E C
HA
RT
6 B
AR (8
7.0
PSI) A
ir Supply S
pring Return T
orque Sheet
Units: in
–lb
s
Model N
o.
Air S
upply
Pressu
reM
ax Drive
Torq
ue
Sprin
g S
tartS
prin
g E
nd
Air S
tartA
ir End
17
,70
09
,09
95
,51
49
,17
85
,60
31
3,0
73
8,3
91
14
,58
69
,89
52
0,2
77
12
,90
42
0,1
80
12
,80
7
35
,40
01
6,7
81
10
,86
01
7,8
61
11
,93
12
2,9
68
14
,41
82
6,9
42
18
,38
33
4,1
46
21
,64
93
4,6
42
22
,14
5
70
,80
04
3,8
55
26
,54
34
1,0
06
23
,69
35
5,9
90
32
,97
85
5,2
55
32
,24
37
3,1
16
41
,77
66
9,8
94
38
,56
3
14
1,6
00
82
,97
651,5
47
84
,94
95
3,5
12
10
1,1
29
62
,77
01
05
,87
36
7,3
81
12
4,6
19
73
,85
11
30
,05
37
9,2
76
28
3,2
00
16
0,9
51
95
,16
31
64
,35
09
8,5
62
19
8,8
85
11
2,5
46
19
6,3
01
10
9,9
62
25
6,2
56
15
3,0
12
26
7,3
55
16
4,1
19
55
7,5
96
23
5,6
95
14
8,9
40
22
6,0
84
13
6,9
30
31
3,5
38
19
1,8
75
31
8,5
83
19
6,9
11
42
2,5
53
25
9,3
27
40
7,3
91
25
3,0
69
1,1
06
,34
05
07
,57
33
11
,54
64
72
,80
72
76
,80
7
SY
14
-SR
6-2
0-F1
46
BA
R (8
7.0
PS
I)S
Y1
4-S
R6
-25
-F14
6 B
AR
(87
.0 P
SI)
SY
14
-SR
6-3
0-F1
46
BA
R (8
7.0
PS
I)S
Y1
6-S
R6
-25
-F16
6 B
AR
(87
.0 P
SI)
SY
16
-SR
6-3
0-F1
66
BA
R (8
7.0
PS
I)S
Y1
6-S
R6
-35
-F16
6 B
AR
(87
.0 P
SI)
SY
25
-SR
6-3
5-F2
56
BA
R (8
7.0
PS
I)S
Y2
5-S
R6
-40
-F25
6 B
AR
(87
.0 P
SI)
SY
25
-SR
6-4
5-F2
56
BA
R (8
7.0
PS
I)S
Y3
0-S
R6
-45
-F30
6 B
AR
(87
.0 P
SI)
SY
30
-SR
6-5
0-F3
06
BA
R (8
7.0
PS
I)S
Y3
0-S
R6
-55
-F30
6 B
AR
(87
.0 P
SI)
SY
35
-SR
6-5
5-F3
56
BA
R (8
7.0
PS
I)S
Y3
5-S
R6
-60
-F35
6 B
AR
(87
.0 P
SI)
SY
35
-SR
6-7
0-F3
56
BA
R (8
7.0
PS
I)S
Y4
0-S
R6
-60
-F40
6 B
AR
(87
.0 P
SI)
SY
40
-SR
6-7
0-F4
06
BA
R (8
7.0
PS
I)S
Y4
0-S
R6
-80
-F40
6 B
AR
(87
.0 P
SI)
SY
48
-SR
6-8
0-F4
86
BA
R (8
7.0
PS
I)S
Y4
8-S
R6
-90
-F48
6 B
AR
(87
.0 P
SI)
61
6,0
30
37
7,2
01
61
5,5
25
37
6,6
97
73
1,7
80
46
0,0
27
76
5,5
63
49
3,8
10
2,2
12
,68
5
69
8,1
29
43
5,6
07
62
5,9
60
36
0,7
74
84
8,7
07
51
4,9
10
82
5,2
70
49
1,4
73
99
4,5
50
63
5,1
65
1,0
19
,38
56
60
,00
0
SY
48
-SR
6-1
00
-F48
6 B
AR
(87
.0 P
SI)
SY
60
-SR
6-8
0-F6
06
BA
R (8
7.0
PS
I)S
Y6
0-S
R6
-90
-F60
6 B
AR
(87
.0 P
SI)
SY
60
-SR
6-1
00
-F60
6 B
AR
(87
.0 P
SI)
SY
60
-SR
6-1
10
-F60
6 B
AR
(87
.0 P
SI)
N/A
N/A
N/A
N/A
Pratt Industrial I 7
DOUBLE ACTING DIMENSIONAL CHART
DA Dimensions Units: inches
Model No. MountingFlange L L1 m1 m2 A B ØD Air Inlet
SY14-DA-20-F14F14
23.4 17.7 3.4 7.4 2.4 3.5 10.0 3/8”SY14-DA-25-F14 23.4 17.7 3.4 8.4 2.4 3.5 12.0 1/2”SY14-DA-30-F14 23.4 17.7 3.4 9.4 2.4 3.5 14.0 1/2”SY16-DA-25-F16
F1626.7 19.6 4.1 8.8 2.8 3.6 12.0 1/2”
SY16-DA-30-F16 26.7 19.6 4.1 9.7 2.8 3.6 14.0 1/2”SY16-DA-35-F16 26.7 19.6 4.1 10.7 2.8 3.6 15.9 1/2”SY25-DA-35-F25
F2530.2 21.9 5.9 11.5 3.5 4.1 15.9 1/2”
SY25-DA-40-F25 30.2 21.9 5.9 12.5 3.5 4.1 17.9 3/4”SY25-DA-45-F25 30.2 21.9 5.9 13.8 3.5 4.1 20.5 3/4”SY30-DA-45-F30
F3036.3 26.1 6.9 14.6 4.3 5.1 20.5 3/4”
SY30-DA-50-F30 36.3 26.1 6.9 15.6 4.3 5.1 22.4 3/4”SY30-DA-55-F30 36.3 26.1 6.9 16.5 4.3 5.1 24.4 3/4”SY35-DA-55-F35
F3544.5 32.2 8.2 17.7 5.5 6.5 24.4 1”
SY35-DA-60-F35 44.5 32.2 8.2 17.7 5.5 6.5 26.4 1”SY35-DA-70-F35 44.5 32.2 8.2 18.7 5.5 6.5 30.3 1”SY40-DA-60-F40
F4052.0 37.8 9.4 19.9 6.7 7.9 26.4 1”
SY40-DA-70-F40 52.0 37.8 9.4 21.9 6.7 7.9 30.3 1”SY40-DA-80-F40 52.0 37.8 9.4 23.9 6.7 7.9 34.4 1-1/2”SY48-DA-80-F48
F4862.2 44.5 11.0 25.1 7.9 8.3 34.4 1-1/2”
SY48-DA-90-F48 62.2 44.5 11.0 27.1 7.9 8.3 38.4 2”SY48-DA-100-F48 62.2 44.5 11.0 31.0 7.9 8.3 42.3 2”SY60-DA-80-F60
F60
77.2 54.3 13.5 27.9 10.6 9.1 34.4 1-1/2”SY60-DA-90-F60 77.2 54.3 13.5 29.8 10.6 9.1 38.4 2”
SY60-DA-100-F60 77.2 54.3 13.5 31.8 10.6 9.1 42.3 2”SY60-DA-110-F60 77.2 54.3 13.5 33.8 10.6 9.1 46.3 2”
8 I Pratt Industrial
SPRING RETURN DIMENSIONAL CHART
SR Dimensions Units: inches
Model No. Mounting Flange L L1 m1 m2 A B ØD Air Inlet
SY14-SR*-20-F14F14
43.5 17.7 3.4 7.4 2.4 3.5 10.0 3/8”SY14-SR*-25-F14 43.5 17.7 3.4 8.4 2.4 3.5 12.0 1/2”SY14-SR*-30-F14 44.3 17.7 3.4 9.4 2.4 3.5 14.0 1/2”SY16-SR*-25-F16
F1650.7 19.6 4.1 8.8 2.8 3.6 12.0 1/2”
SY16-SR*-30-F16 50.7 19.6 4.1 9.7 2.8 3.6 14.0 1/2”SY16-SR*-35-F16 51.9 19.6 4.1 10.7 2.8 3.6 15.9 1/2”SY25-SR*-35-F25
F2562.0 21.9 5.9 11.5 3.5 4.1 15.9 1/2”
SY25-SR*-40-F25 62.0 21.9 5.9 12.5 3.5 4.1 17.9 3/4”SY25-SR*-45-F25 65.9 21.9 5.9 13.8 3.5 4.1 20.5 3/4”SY30-SR*-45-F30
F3071.1 26.1 6.9 14.6 4.3 5.1 20.5 3/4”
SY30-SR*-50-F30 71.1 26.1 6.9 15.6 4.3 5.1 22.4 3/4”SY30-SR*-55-F30 71.1 26.1 6.9 16.5 4.3 5.1 24.4 3/4”SY35-SR*-55-F35
F3578.9 32.2 8.2 17.7 5.5 6.5 24.4 1”
SY35-SR*-60-F35 78.9 32.2 8.2 17.7 5.5 6.5 26.4 1”SY35-SR*-70-F35 78.9 32.2 8.2 18.7 5.5 6.5 30.3 1”SY35-SR*-60-F35
F40106.1 37.8 9.4 19.9 6.7 7.9 26.4 1”
SY35-SR*-70-F35 106.1 37.8 9.4 21.9 6.7 7.9 30.3 1”SY40-SR*-80-F40 106.1 37.8 9.4 23.9 6.7 7.9 34.4 1-1/2”SY48-SR*-80-F48
F48133.7 44.5 11.0 25.1 7.9 8.3 34.4 1-1/2”
SY48-SR*-90-F48 133.7 44.5 11.0 27.1 7.9 8.3 38.4 2”SY48-SR*-100-F48 141.1 44.5 11.0 31.0 7.9 8.3 42.3 2”SY60-SR*-80-F60
F60
164.8 54.3 13.5 27.9 10.6 9.1 34.4 1-1/2”SY60-SR*-90-F60 164.8 54.3 13.5 29.8 10.6 9.1 38.4 2”
SY60-SR*-100-F60 187.0 54.3 13.5 31.8 10.6 9.1 42.3 2”SY60-SR*-110-F60 187.0 54.3 13.5 33.8 10.6 9.1 46.3 2”
Pratt Industrial I 9
Pratt IndustrialEmporia, Kansas
Tel. 620-208-8100Fax. 620-208-8111www.prattindl.com
© 2014 CAM Valve and Automation, LLC I Printed in the U.S.A. I PI-SY-1014