7/30/2019 SX200 Info Sheet

1/2

PETROL ENGINE, HYDRAULIC FEED BRAKED ROAD CHASSIS - OPTIONAL CONVEYOR

EXCELLENT AT HANDLING GREEN WASTE, PERFECT FOR CREATING COMPOST

TW SX200PHB SHREDDER

FOR YOUR NEARESTTIMBERWOLF DEALERCALL 0845 686 0137

The all new TW SX200PHB(c) is an economical,

high throughput, low cost green waste shredder

aimed at landscapers, local authorities and

contractors and can be easily operated by a

single user.

Unlike its competitors, the SX200 has a dedicated

integral chassis with brakes as opposed to a

bought in trailer chassis. It has a 20 HP Honda

petrol engine, widely recognised as the most

reliable and economic on the market. It is

specifically aimed at processing green waste with

reduced noise, aided by the forged, sharp profile

hammers with Teflon bushes. Quieter than some

of the bigger machines, it is suitable to use in

urban areas where noise pollution is often a

pressing concern for businesses. There is also

an option for a conveyor (feed and grab design)

which draws material to the feed roller.

(C)

NEWPRO

DUCT!

SEETHISMAC

HINEINA

CTION...

...VISITTHESAL

TEXSHO

W

(LISTER

WILDERSTAND&

DEMONS

TRATIONVILLAGE

)

...ORT

HE

APFSHO

W

7/30/2019 SX200 Info Sheet

2/2

SPECIFICATIONS

Key Benefits Include:

Optional feed conveyor

Sub 750kg in weight

Fully homologated Feed roller optimally positioned to take material

as it reaches letter box style feed mouth

Feed roller controls on both sides of feed funnel

for additional safety and easier operation

Easy access to rotor from the top of the machine

Discharge chute rotates through 270 degrees

A simple and reliable direct belt drive

Waste material from conveyor operation diverted

to rotor or rear of machine, rather than dropping

onto the floor underneath Optional hammer layout (to allow for different

processing and end product requirements)

Superior air flow that throws material further

No stress system complete with auto-back-off

Honda engine with built in hour clock

TW SX200PHB SHREDDER(C)

Landscapers will be particularly interestedin the capabilities of the SX200 this

robust machine with letter box style feed

mouth can shred green materials, hedge

trimmings, conifer, shrubs, brash and also

nursery waste (such as packaging, plastic

plant pots/seed trays, etc.) with ease,

which means you dont have to rely on

material being clean.

In such environments where having a

lesser wood content and the inclusion of

dirt and foreign objects is commonplace,

(plus the fact that the end product is

normally required for compost), the

SX200 is the perfect solution as compost

forms better and more quickly if the

material is shredded rather than chipped.

ENGINE FUELTANK

CAPACITYWEIGHT LENGTH WIDTH HEIGHT

MAX DIA.

INFEED

THROUGH-

PUTFEED METHOD HAMMERS

20 hp

Honda

V-twin

UnleadedPetrol

18 litres(4 gallons)

745kg(with

conveyor)

700kg(without

conveyor)

3280mm 1510mm2270mm

200mm(8) x

150mm(6)

Up to 2tonnes per

hour

Via toothedconveyor to

hydraulic rollerc/w Auto FeedControl/Auto

Back Off

12 Singleform

replaceablehammers

TIMBERWOLF, Tomo Industrial Estate, Stowmarket, Suffolk IP14 5AY

CONTACT T: 0845 686 0137 E: info@timberwolf-uk.com W: timberwolf-uk.com