SWIS CAPPING STACK SYSTEM - Oil Spill Response Limited · H4 - 18¾” API HC - 18¾” API Adapter...
Transcript of SWIS CAPPING STACK SYSTEM - Oil Spill Response Limited · H4 - 18¾” API HC - 18¾” API Adapter...
![Page 1: SWIS CAPPING STACK SYSTEM - Oil Spill Response Limited · H4 - 18¾” API HC - 18¾” API Adapter Spools 3m 2m 1m Lifting Eye Accumulator Racks (40 Bottles x 15 Gallons) H4 Test](https://reader034.fdocuments.us/reader034/viewer/2022042212/5eb52aa9611f497a683feb61/html5/thumbnails/1.jpg)
Oil Spill Response Limited (OSRL) can provide members global access to an integrated intervention system comprising of four capping stacks and two incident response toolkits.
The Capping Stack System: Key Facts• Four capping systems, including two 18¾” 15k stacks and two 7¹⁄₁₆” 10k stacks
(with ancillary equipment) • Transportable by sea and/or air • Available for a variety of international metocean conditions• Designed for subsea use to a maximum of 3000m water depth • Stored in four strategic regional locations around the world – Brazil, Norway, Singapore and South Africa• Manufactured by Trendsetter Engineering
KEY FEATURESStandardised Capping Platform
Outlets with Dual 5 ¹⁄₈”15k Gate Valves
Retrievable Choke
ROV Panel
Lower Connector
Flow Line Connector
Acoustic Transponder
The four capping stacks (both full bore and reduced bore) are designed into a standard configuration with common pipework, valves, chokes and spools all rated to 15kpsi.
The key difference is the use of 7 ¹⁄₁₆” 10k gate valves for the 10k stacks and 18¾“ 15k rams for the 15k stacks.
TECHNICAL INFORMATION SHEET
SWIS CAPPING STACK SYSTEM
Flexible to handle a variety of scenarios
Retrievable chokes to help gain control of a flowing well
15k connectors, adapter and spacer spools
Connects to BOP, flex joint, or top of wellhead
4 x 51/8” outlets on the diverter spool
Diverter spool providing optimal flow path during installation and shut in
Use of Spreader Bar to run the Capping device
Acoustic real-time pressure and temperature data to surface
![Page 2: SWIS CAPPING STACK SYSTEM - Oil Spill Response Limited · H4 - 18¾” API HC - 18¾” API Adapter Spools 3m 2m 1m Lifting Eye Accumulator Racks (40 Bottles x 15 Gallons) H4 Test](https://reader034.fdocuments.us/reader034/viewer/2022042212/5eb52aa9611f497a683feb61/html5/thumbnails/2.jpg)
The 10k System
Outlets with Dual 5 ¹⁄₈”15k Gate Valves
Dual 7 ¹⁄₁₆” 10k Gate Valves
Lower Connector
Flow Line Connector
Retrievable Choke
7 ¹⁄₁₆” 10k API Hub
Acoustic Transponder
ROV Panel
SPECIFICATION
71/16” 10k Capping Device and 183/4” 15k Capping Device
Design Pressure 10 kpsi / 15 kpsi
Design Life 20 years (storage), 6 months (flowing), 2 years (shut)
Water Depth Up to 3000m
Flow Rate 0 to 100 kbd of liquid
GOR 0 to 2000 scf/stb
Design Temp -2°C to 150°C (Operation), -20°C to 40°C (Storage)
CO2 0 to 10%
H2S 0 to 500 ppm
Water Cut Up to 30%
Injection Dispersant and Hydrate Inhibitor (150 L/min)
Outlets 4 outlets, each with dual
5¹⁄₈” Gate Valves
Sealing Device 10k Stack: 2 x 7¹⁄₁₆” Gate Valve (fail as is)/ 15k Stack: 2 x 18¾” Rams
Operation Third-Party ROV (manual and hydraulic)
Measurements Pressure and Temperature
Connectors H4 and HC 18¾” 15kpsi
Adapter spools H4 and HC 18¾” by 18¾” 15 kpsi API flange
Flow Control Retrievable Choke Valve on each outlet
Installation Drill Pipe and / Method or Wire Line
Transportability Air, Land and Sea
Material NACE MR-0175 Zone 3
The 15k System
18¾” Dual 15k Rams
Lower Connector
Flow Line Connector
Retrievable Choke
H4 Mandrel
Acoustic Transponder
Outlets with Dual 5 ¹⁄₈”15k Gate Valves
ROV Panel
Oil Spill Response LtdLower William StreetSouthampton SO14 5QEUnited KingdomT: +44 (0)23 8033 1551F: +44 (0)23 8033 1972E: subseaservices@oilspillresponse.comwww.oilspillresponse.comwww.swis-oilspillresponse.com
Ancillary EquipmentConnectors Spacer Spools
HC Connector H4 Connector
H4 Weldneck
H4 - 18¾” API
HC - 18¾” API
Adapter Spools
3m 2m 1m
Lifting Eye
Accumulator Racks (40 Bottles x 15 Gallons)
H4 Test Stump
HC Test Stump
Test Stand
18¾” API 15k blind flange Connector Parking
Stands
JULY
201
4