Swagemaster 2016/2017 Manufacture & Stock · specialize in manufacturing Spectacle Blinds, Spades...

Swagemaster 2016/2017Manufacture & Stock

Contents

Contents Page 1 – Introduction.

– Flanges ANSI B16.5 ,JIS, Gost.

Page 3 - Nipoflange, Weldo-flange & Olets.

Page 4 – Spectacle Blinds, Spades & Spacers.

Page 5 – BW Fittings ANSI B16.9.

Page 6 – Forged Fittings ANSI B16.11.

Page 7 – Seamless & Welded Line pipe.

Page 8 – Structural Beams & Sections.

Page 9 – Fabrication and Custom Design.

Page 10 – Polypropylene Pipes & Fittings.

Page 11 – Contact Information.

Swagemaster specialize in manufacturing and sourcing related commodities from the Petrochemical, Oil and Gas industry. We Manufacture a wide range of Flanges, Spectacle Blinds, Spacers, Spades and fittings to our own Swagemaster brand as well as stocking a large consignment of European and USA Pipes, fittings and Flanges.

Over the past Decade Swagemasters market growth has risen at an unprecedented rate due to key factors of constant investment in products, personnel, facilities and plant.

Our expertise in procurements is also second to none and if the item required can not be Manufactured or supplied from stock, our Dedicated sales staff will endeavour to find the solution from within our vast network of suppliers and Manufacturers that we work closelyWith every day.

Introduction

Swagemaster manufacture and supply the highest quality of Flanges from only European and USA sourced quality forgings.

Our Flanges are available in various formats such as

• Slip On • Blind Flange• Weldneck• Long Welded Neck. • Socketweld • Threaded • Lap Joint • Orifice

We manufacture to a wide range of flange specifications from industry standard ASTM to End user project requirements that require tightly controlled material conformity.

Materials

Stainless A182 F304/L/H, F310/H, F316/L/H, F321/H, F347/H, F410, F440, 904L

Carbon Carbon Steel - A105, C22.8 Low Temperature Steel A350, LF2, LF3, LF6

Alloy Steel Alloy Steel - A182 F1, F5, F9, F11, F12, F22, F91 High Yield A694, F42, F52, F60, F65, F70

Duplex & Super Duplex A182 F51, F44, UNS S32760

Nickel Alloys 200, 400, 600, 625, 800, 825

Unusual Grades Bronze, Brass, Copper, Cupro Nickel, Titanium

Specifications

Available Sizes 1/4" through to 64" Wall thickness Schedule 5s through to Schedule XXS and heavier.

Dimensions & Pressure Rating JIS Gost ANSI, MSS- SP-44, BS3293, API 605 150lb through to 2500lb

Available Facing Raised Face, Ring Type Joint Large Tongue & Groove, Small Tongue & Groove BS4504 - PN6, 10, 16, 25 & 64 BS10 - Table D, E, F & H

Flanges From Manufacture and Stock

Just a few of the Major brands we have in our current stock range.

Swagemaster manufacture and supply the highest quality of Nipo-Flanges, Olets and Weldolet Flanges to meet the exacting requirements of the International Petrochemical Industry as well as Bi-spoke Client designs.

Materials





Nickel Alloys 200, 400, 600, 625, 800, 825


Specifications

Available Sizes Branch sizes ½” – 2” Sch 40- XXS, Run size to order.

Dimensions & Pressure Rating

ANSI B16.5, B16.47 , 3000, 6000lb , 150LB – 2500LB

Available Facing Raised Face, Ring Type Joint ( RTJ ) & Flat Face.

NipoFlange, Olet, WeldoflangeFrom Manufacture and Stock

Swagemaster specialize in manufacturing Spectacle Blinds, Spades and Spacers to both industry standard ASME B16.48 to Bi-Spoke client specifications, all from hand picked European Quality Plate material.

With large stocks on the shelf available for same day dispatch, this particular Swagemaster product has heavily supported many of the worlds largest projects over the last decade and is Widley trusted within the Industry.

Materials

Stainless A240-316/316L, A240-304/304L, A240-321, A182 F304/L/H, F310/H, F316/L/H, F321/H, F347/H, F410, F440, 904L

Carbon A516-60/65/70 + 70 HIC Resistant, A105, C22.8 Low Temperature Steel A350, LF2, LF3, LF6

Duplex & Super Duplex

UNS S31803, UNS S32205, UNS S32750,UNS S32760

Specifications

Available Sizes ½” ( DN15 ) through to 72 ” ( DN1800 )


All fittings are designed in accordance with ASME B16.48 unless otherwise specified. Typical Asme B16.48 ratings from 150lb through to 2500lb We also supply many other projects such as Total, Shell, Maersk which all vary dimensionally.

Available Facing Raised Face, Flat faced, Female Ring Type Joint, Male Ring Type Joint & Special items according to customer drawings.

Spectacle Blinds,Spacers & Spades, Manufactured

Swagemaster keep vast stocks of Buttweld fittings in Stainless Steel, Alloy, and both High and Low temperature grades of Carbon, sourced only from Major European or USA Manufacturers. Swagemaster Also Manufacture our own brand of Concentric and Eccentric ReducersSince 1990.

• Stocked Buttweld Fittings Include: • Elbows ( 90 Deg & 45 Deg )• Equal & Reducing Tees• Cross’s both equal and un Equal. • Concentric & Eccentric Reducers.• Caps.• More on request.

Specifications

Available Sizes

1/4" through to 64"


Schedule 5s through to Schedule XXS and heavier

All pipe fittings are made and controlled to the relevant standards such as: ASME, ASTM, BS and DIN/WERKSTOFFE. BS 1640/ANSI - ASME B16.9 - B16.28 - B16.25 Seamless, Welded, Welded X-Ray.

Available Ends & Finishes

Buttweld Ends, Self Colour or HDG

Materials Stainless A403-WP-316/316L, 304/304L, 321, F304/L/H, F310/H, F316/L/H, F321/H, F347/H, F410, F440, 904L

Carbon A234-WPB, A420-WPL6

Others on Request.


Butt-Weld Fittings From Manufacture and Stock

Swagemaster keep vast stocks of Forged Fittings in Stainless Steel, Alloy, and both High and Low temperature grades of Carbon, sourced only from Major European or USA Manufacturers. Swagemaster Also Manufacture our own brand of Forged fittings on request made from forged Bar with very impressive lead times.

• Stocked Forged Fittings Include: • Elbows ( 90 Deg & 45 Deg , SR & LR )• Equal & Reducing Tees.• SW & Threaded Unions.• Concentric & Eccentric Reducers.• Swaged Nipples.• Hexagon Nipples.• Caps.• Couplings Half & Full.• Roundhead & Hex head Plugs.

Forged Fittings From Manufacture and Stock

Materials





Nickel Alloys 200, 400, 600, 625, 800, 825



Swagemaster Source and stock seamless Carbon, Alloy, Duplex and stainless linepipe all from major European and USA manufacturers.

• Manufacturing Standards: ASTM, EN, DIN, BS, GOST• Carbon steel: A333 Gr.6, A106 Gr B/A/C, API 5L X42, X46, X52,X60, X65, X70 (PSL1 & PSL2), P235HG,P265GH (TC1 & TC2),

S355J2H, P355N, P420N, L245NB, L290NB, ST37.8, ST35.8• Stainless & Duplex steel: TP304L, TP316L, TP316TI,TP317L, TP304H, TP310S, TP321H, TP347H, TP904L, S31803, S32760,

S32750, S32205, 1.4301, 1.4306, 1.4541, 1.4404, 1.4401, 1.4571.• Alloy steel: A335-P1,P5, P9, P11, P22, P91,P92, 16Mo3, 13CrMo4-5, 10CrMo9-10, X11CrMo5, X10CrMoVNb9-1,

X20CrMoV1-1.• Nickel alloy steel: Alloy 825, Alloy 800H, Alloy 625, Alloy 600, Alloy 400, Alloy 200/201, Hastelloy C276• Sizes: from 1/2" up to 102" / SCH STD up to SCH160/XXS / 1.5mm to 60.0mm• Availability: Pp to 24” Seamless & from 24” to 102” SAW/ERW Welded - Ends Bevelled / Plain - Stock / Production• Lengths: SRL 5-7 metres and DRL 9-13 metres


Line Pipe Supply & Stock

Swagemaster Source and stock Structural European Beams, Channels and Angles to BS EN 10025 in a multiple of grades from S275, S355 J2 (+N,M,AR )

Angles

We stock hot-rolled equal and unequal angles in grade S355J2. We carry a full assortment of products in almost any dimensions including special sizes.

But please also call us whenever you need angles of grade S235JR.

Dimensions: Equal angles from 20 x 20 x 3 mm to 300 x 300 x 38 mmUnequal angles from 30 x 20 x 3 mm to 250 x 90 x 16 mm

Flat Bars

Flat bars in grades S355J2 and C-45 are kept in our stock. We carry a full assortment of products in almost any dimension, including special sizes.

But flat bars in grade S235JR are also available from us.

Range of dimensions: Thicknesses: 3 – 100 mm, Widths: 15 – 600 mm

The standard length is 6,000 mm, but many dimensions are also available in lengths of 12,000 mm.

Sections

UNP 80 – 400 mmUPE 80 – 400 mmINP 80 – 600 mmIPE 80 – 750 mmHEA 100 – 1000 mmHEB 100 – 1000 mmHEM 100 – 1000 mm

The above sections are regularly stocked by us in standard lengths of 12 m. Works certificates according to DIN 50049/3.1 areavailable for sections in grade S355J2. At least 2.2 certificates are available for sections in grade S235JR.

Structural, Plate, Beam, Angle & Channel

Swagemaster Specialize in Manufacture and procurement of fittings and assembles from design stage to completion.Contact us about our fabrication and procurement services.

Swagemaster were asked to supply these Electrical Lighting Posts which consisted of low temperature graded pipe and fittings, Galvanized, threaded and welded, all from design stage to final shipment.

Swagemaster were asked to supply these 60” Lobster Style Elbows Constructed from Low temperature HIC resistant Plate hand picked to the clients sensitive specification.

One of our clients requested this unusual long weldneck flange which comprised of an A350-LF2 Body with Stainless 316L Inserted & Welded inside.

Custom Fabrications & Design

Swagemaster Supply a range of Polyethylene Fittings and Pipes.For more information please contact a member of our Sales team.

• PVC-U Un-Plasticised Polyvinyl Chloride

• PVC-C Chlorinated Polyvinyl Chloride

• ABS Acrylonitrile Butadiene Styrene

• PP Polypropylene

• PE Polyethylene

• PVDF Polyvinylidene Fluoride

Polyethylene Pipe & Fittings


Contact Information

Swagemaster Engineering Services ltd.Lint House , Lint house Lane

WolverhamptonWv113EA

United Kingdom

Telephone +44 (0) 1902 906060Sales Enquires : [email protected]: Swagemaster.com

Swagemaster 2016/2017 Manufacture & Stock · specialize in manufacturing Spectacle Blinds, Spades...

Documents

Transcript of Swagemaster 2016/2017 Manufacture & Stock · specialize in manufacturing Spectacle Blinds, Spades...