SVELTA - Support bracket for wall hung wc and bidet · SVELTA - Support bracket for wall hung wc...
Transcript of SVELTA - Support bracket for wall hung wc and bidet · SVELTA - Support bracket for wall hung wc...
PR
OD
UC
T D
ATA
SH
EE
TSANITARY FIXINGS
SVELTA - Support bracket for wall hung wc and bidet
G
C
B
D E
F
A
APPLICATION
Wall hung wc and bidet fastening on masonry.
FEATURES AND BENEFITS
Extremely fast and solid installation thanks to the patented system with bayonette fitting.Fast adjustment of the center-to-center distance between 180 and 230mm allowed by the nuts, which are pre-assembled on the connection rods. Complete with finishing caps for the best aesthetic result.Every package is equipped with detailed assembly instructions.It is designed to bear a load of 400 kg, according to the UNI EN 997 and UNI 8950/2 regulations for wall hung wc and bidet.
COD TYPE A B C D E F G
020535 SVELTA 600 180 39 20 M8 300 M12x180
020536 SVELTA S Single bracket 600 180 39 20 M8 300 M12x180
C O M P LI AN
T400kg
UNI E
N 9
97
- UNI EN 14528
WALL HUNG WC AND BIDET FASTENING
>
>
>
>
>
PR
OD
UC
T D
ATA
SH
EE
T
PR
OD
UC
T D
ATA
SH
EE
T
DATE 03-2020 REV. 00The current technical data sheet substitutes and cancels the previous ones. Information correspond with our current knowledge of the product. It cannot lead us to any sort of responsibility or compensation. Gia S.p.A. reserves the right of changing techical features and molds without notice.
Gia S.p.A. – Via Sac. A. Cremona, 12 – 28069 Trecate (NO) – www.gia.it
SANITARY FIXINGS
WALL HUNG WC AND BIDET FASTENING
T 02.10.25 REV 0
INSTALLATION
In order to install the product properly, please follow the instructions included in the packaging box.
PACKAGING
In cardboard box | 2 items per box
RELATED ITEMS
> PO - spare brass extension kit> CAP - caps> CLIPPO ½” insulated pipe clamps
Stainless steel DX51 D Z200 EN 10142 sendzimir zinc plating
BRACKET
Stainless steel 4.8 EN ISO 898.1 with electro zinc plating 7-8 μm
PP Prolypropylene
PA6 White Nylon
PE Polyethylene
COMPONENTS
PLUG
WASHERS
CAPS
MATERIALS TECHNICAL DATA
Masonry
BASE MATERIAL
INSTALLATION TOOLS AND RECOMMENDATIONS
Drill, drill bit of Ø 8.
Composed of:- zinc-plated brackets- connection rods with preassembled nuts- side brackets for wall fastening - plugs for floor fastening - M12 rods with red covers- support nuts and washers- white nylon washers- finishing caps and washers