sustainable engineers to assist you to design and...

16
sustainable alternative timber Get in touch If you want to talk with our in-house design and technical engineers to assist you to design and customize your products. Sydney 1300 787 717 (Australia Wide) +61 2 9630 8388 (International) Fax:+61 2 9630 8088 Hours: Monday - Friday 8:30am - 5:30pm (AEST) Email:[email protected] Western Australia Email: [email protected] INNOWOOD is committed to finding new ways to do more with less www.innowood.com Youtube: www.youtube.com/innowood

Transcript of sustainable engineers to assist you to design and...

Page 1: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

sustainable

alternativetimber

Get in touch

If you want to talk with our in-house design and technical engineers to assist you to design and customize your products.

Sydney

1300 787 717 (Australia Wide)

+61 2 9630 8388 (International)

Fax:+61 2 9630 8088

Hours: Monday - Friday

8:30am - 5:30pm (AEST)

Email:[email protected]

Western Australia

Email: [email protected]

INNOWOOD is committed to finding new ways to do more with less

www.innowood.com

Youtube: www.youtube.com/innowood

Page 2: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

the sustainable, low carbon,

& energy efficient timber alternative

INNOWOOD

eco-friendly Sydney Wharf 8 & 9, Sydney NSW

2 3

Page 3: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

Wild Life Sydney Zoo - Sydney NSW4 5

Page 4: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

INNOWOOD was established in 2005, the first in Australia to be

involved in designing, developing, manufacturing, and installation of Composite Wood Products in

commercial applications.

The first project for INNOWOOD was the “Wild Life World Sydney”

building at Sydney Darling Harbour in 2006.

Over the past 8 years INNOWOOD products have proven their

versatility in various applications and achieving performance

requirements and accepted by Architects, Designers, Builders and

End Users. They have specified INNOWOOD as being instrumental

in their design of projects in Australia and overseas.

INNOWOOD’s vision is to be a leader in the innovation of

wood-based composite and a sustainable timber alternative,

through inventive solutions, research and development,

including total design and product management.

6 7

Page 5: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

Eco-friendly material - 100% recyclable & low VOC emissions, energy efficiency

Toughness - certain hardness, bendable, high strength; can’t easily be destroyed by external force, security-impact resistance

Comfort - sound proofing, insulation, antistatic, anti-corrosion, UV and moisture resistant

Safe - non toxic, no odour pollution, no splinter, termite, mildew and water resistance, fire retardant

Uniqueness - Design to any shape, product with excellent architecture design

Durable - anti aging, weathering; suitable for any environment & will not crack, split, swell, rot, flake or peel

Attractive - the look of real timber minus the challenges

Versatile - suitable for indoor & outdoor applications & can bent or curved to suit any design

Workability- can be sawn and nailed; plane is used as normal working tool; can be bonded and pinned same as timber

Flexible and convenience - mostly using socket bayonet and mortise design, quick and easy to install

A wide range application - indoor and outdoor, commercial and residential

Light weight - compared to equivalent solid timber, up to 75% weight saving in certain applications

06 Introduction

09 Why INNOWOOD?

10 InnoDeck

12 InnoTiles

14 InnoClad

16 InnoCeil

18 InnoScreen

20 InnoShade

22 Louvre

24 Residential Projects

26 InnoCoat

27 Batten, Beams & Bollards

28 Street Furniture

29 Frequently Asked Questions

30 Care & Maintenance

32 Contact Information

Why INNOWOOD?Contents

8 9

Page 6: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

InnoDeck is the ideal real timber alternative for any indoor or outdoor commercial or residential decking application and design option. It requires low maintenance and is easy to install.

Constructed from low carbon, energy saving composite timber, InnoDeck is made to perform, outlast and withstand even the most challenging environmental conditions.

INNODECK

InnoDeck Systems:InnoDeck Plastic Connector Conceals Fixing SystemInnoDeck Stainless Steel Connector Conceals Fixing SystemInnoDeck Aluminum Tee Section Fixing SystemInnoDeck Naked Nailing Fixing System

10 11

Page 7: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

INNOTILESConstructed from environmentally friendly composite timber, InnoTiles are the perfect choice for modular decks in residential and commercial settings. Lightweight, durable and suitable for all weather conditions, InnoTiles are easy to handle, quick to install and designed to stand the test of time.

InnoTiles composite timber deck tiles can be manufactured in any size, shape and pattern to suit even the most imaginative design. And because they are quick and easy to façade directly onto existing surfaces, including brick pavers, tiles, concrete or stone (including pebble) and timber floors, InnoTiles will instantly transform the look of any area.

12 13

Page 8: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

INNOCLADInnoClad is an architectural composite wood cladding system that enhances outdoor façades and internal linings in a range of commercial and residential settings. Ideal for new buildings, renovations or extensions, InnoClad’s contemporary look will add distinctive character and value to any building.

InnoClad Systems:InnoClad E’Clip fixing SystemInnoClad Step Fix SystemInnoClad Snap Fix SystemInnoClad shiplap fixing systemFlat-joint System

InnoClad are perfect for new buildings, renovations, extensions, Shop fit-outs, and refurbishment of resi-dential or commercial building

InnoClad can be combined with flooring, screening and decking with the same wood finish to carry a consistent theme throughout the building.

14 15

Page 9: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

INNOCEILInnoCeil is a high performing, composite timber, modular ceiling system designed for indoor and outdoor commercial or residential applications. InnoCeil’s unique flexibility solves many of the design challenges that traditional building materials are unable to meet. Available in a range of colours, profiles and sizes, InnoCeil’s modular ceiling panels can also be custom designed to meet the design specifications created by your architect or designer.

InnoCeil Systems:

InnoCeil Acoustic SystemInnoCeil E’Clip SystemInnoCeil Linear Grid SystemInnoCeil Modular SystemInnoCeil Shiplap SystemInnoCeil Slat Pin Nail System

16 17

Page 10: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

INNOSCREENInnoScreen is an innovative, energy saving and cost effective composite timber screening solution that offers superior decorative and protective functions in commercial and residential applications. Designed for both horizontal and vertical fixing applications over steel or timber supports, InnoScreen is the ideal screening solution to achieve any design or desired look.

18 19

Page 11: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

INNOSHADEInnoShade’s Sol ‘art Louvre Systems & Sol ’art Opening Roof Systems are architecturally designed and developed sun shading and solar control systems crafted from INNOWOOD’s sustainable, durable and cost effective composite wood product range.

Available with various fixing options, InnoShade composite timber shading and solar control systems are suitable for commercial and residential applications.

University of New South Wales, Sydney NSW

InnoShade Systems:

InnoShade Sol ‘art Louvre SystemInnoShade Sol ‘art Opening Roof System

20 21

Page 12: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

LOUVRESol ‘art Louvre Systems are designed for both external and internal use. Available with horizontal or vertical louvres and panel blades, Sol ‘art Louvre Systems composite timber louvre maximise comfort, functionality and the energy-efficiency of your home or commercial building. They can provide shade during the day while still allowing cross breezes to come through and be fully closed at night for privacy and comfort.

Sliding or Bi-folding Shutters are an ideal way to maximise your useable living space by enclosing a deck or veranda to create a weather and sun protected ‘outdoor room’, while automated solar shutters are perfect for those out of reach windows and exterior screening requirements.

INNOWOOD Louvre Systems:

Sol ‘art Louvre Fixed SystemSol ‘art Shutter Operable SystemSol ‘art Motorised Control System

22 23

Page 13: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

RESIDENTIAL PROJECTS

24 25

Page 14: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

INNOCOAT BATTEN BEAM & BOLLARDSInnoCoat is a water-based UV protective composite timber sealer that has been specifically formulated to protect the surface, reduce the maintenance and extend the life of INNOWOOD products.

INNOWOOD Battens are simple, square profiled, solid or hollow wood-based composite timber building products that offer a range of applications including screening, fencing, decorative enhancement and street furniture.

INNOWOOD Beams & Bollards are a lightweight, decorative composite timber post and beam cladding solution and a sustainable alternative to

rare and expensive timbers that are both difficult and expensive to install.

INNOWOOD has developed an innovative process whereby a steel or aluminum structural core is encased in composite timber. The commercial viability of the INNOWOOD Batten Beam & Bollard process allows you to achieve a custom designed composite timber solution to suit your specific need.

Protect your INNOWOOD product from the harsh Australian sun with InnoCoat

INNOWOOD products are supplied uncoated, which is fine when they are intended for internal use only. For external use, we strongly recommend the application of a water-based, UV protective composite timber sealer.

INNOWOOD has worked with an Australian Coating manufacturer to develop a quick drying, water-based coating with a high resistance to UV that would enhance INNOWOOD’s surface and offer superior protection against foot traffic and Australia’s harsh conditions. InnoCoat ticks all those boxes and more.

We recommend the use InnoCoat on all INNOWOOD products that are intended for external use.

InnoCoat features & benefits

Non-flammable

Non-hazardous

Lead free

UV resistant

Quick drying (2-3 coats may be applied in a day)

Maintains the beautiful INNOWOOD wood grain finish

Excellent adhesion

Low odour

Easy to clean

26 27

Page 15: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

STREET FURNITURE FAQsINNOWOOD offers a design and supplying for public space range includes Outdoor Benches and Seats, tables, Bins, the perfect composite wood material instead natural timber.

Non-toxic

Non polluting

100% recyclable

Low VOC emissions

Durable & Low maintenance

Lightweight but strong

Will not crack, split, rot or generate mould & mildew

Termite & UV resistant

Water resistant with minimal moisture absorbance

Fire retardant

INNOWOOD material– the appearance of natural timber minus the challenges of natural timber

28 29

WHAT IS INNOWOOD?

INNOWOOD is sustainable timber alternative and 100% recyclable, low VOC emissions, energy efficiency ecofriendly material.

WHY IS INNOWOOD BETTER THAN TRADITIONAL TIMBER?

INNOWOOD looks and feels like real timber without its inherent shortcomings such as timber’s tendency to crack, warp, split or rot over time. INNOWOOD is also low maintenance, lightweight, and resistant to termites, water and fire. Unlike traditional timber, INNOWOOD is self-extinguishing if subjected to fire.

HOW DURABLE IS INNOWOOD?

INNOWOOD is resistant to fire, water and termites. It also discourages the growth of mould and mildew, is low maintenance and maximum lifespan.

HOW DOES THE PRICE OF INNODECK COMPARE WITH TRADITIONAL TIMBER DECK?

While the initial cost to build a pine or hardwood deck may be lower, the value of an INNOWOOD deck truly comes into its own over the longer term, easy to install and low maintenance and significant cost and time savings.

IS INNODECK SUITABLE AROUND POOLS?

INNOWOOD is suitable around pools, spas, boardwalks and all marine environments as it is impervious to saltwater.

HOW SAFE IS INNOWOOD?

INNOWOOD is non toxic, splinter-proof, making it ideal for children and bare feet. Also, INNOWOOD is Fire retardant, non-combustible and self-extinguishing material.

WILL INNOWOOD BOARDS MOVE UNDERFOOT?

INNOWOOD is unaffected

by moisture absorption but consideration should be given to ambient temperature and direct sunlight when initially laying boards as the deck will stabilise in its new environment. INNOWOOD will not shrink across the board’s width but, as is the case with timber tongue and groove boards, some seasoning of the INNOWOOD boards prior to installation will minimise possible movement in the board’s length caused by variations in individual board temperatures.

DOES INNOWOOD VARY IN COLOUR?

Because INNOWOODis made predominantly from timber hardwood waste, colour will vary slightly according to the hardwood species used in its manufacture. It is therefore recommended that all boards be sourced from the same production batch if possible.

WILL INNOWOOD FADE?

INNOWOOD is like natural timber, fading over time and depending upon the amount of sunlight. INNOWOOD water-based coating will protect the composite timberfrom fading when exposed to the sun and foot traffic for 1-5 years.

HOW DO I MAINTAIN INNOWOOD BOARDS?

To maintain the finish and extend the life of your INNOWOOD boards, regular simple maintenance is recommended. To protect the colour of your boards an INNOWOOD sealer should be applied following installation. A regular simple cleaning routine is important to keep your INNOWOOD boards looking their best. Simply remove surface dirt by sweeping or washing down the boards with water.

HOW DO I RECOAT MY INNOWOOD BOARDS?

To apply a maintenance coat to a surface that is in good condition, simply clean the surface with Methylated Spirits and apply one coat of INNOWOOD Sealer.

The first indication of the need for recoating will be observed as patchiness or discolouration on the edges and on areas where insufficient sealer had been applied initially.

WHAT FINISHES DO INNOWOOD BOARDS COME IN?

Smooth, Slightly Sanded and Industrial Sanded.

HOW MANY STANDARD COLOUR DO INNOWOOD BOARDS COME IN?

Spotted Gum, Weathered Wood, Red Cedar, Iron Bark and Teak.

HOW SHOULD INNOWOOD BOARDS BE HANDLED?

INNOWOOD boards should be handled with care when loading and unloading (do not drop on the ground), stored undercover on a flat surface and supported at 600mm centres until ready to be installed.

HOW DOES INNOWOOD PERFORM IF EXPOSED TO FIRE?

INNOWOOD Composite Timber has achieved a CSIRO Fire Hazard Rating of 2, meaning it is a fire retardant, non-combustible, self-extinguishing material.

WHAT IS INNOCOAT?

InnoCoat is INNOWOOD’s exclusive water-based sealer. It is a non-hazardous, non- flammable, non-toxic, low odour and lead free product.

IS INNOWOOD GUARANTEED TO PERFORM?

INNOWOOD products and systems are manufactured by a fully accredited manufacturer of wood composite products with ISO 9001:2000 Certification. As a result, INNOWOOD products are backed by a 7-year limited warranty. Please visit www.innowood.com. Hard copy can be provided upon request.

Page 16: sustainable engineers to assist you to design and ...innowood.com/wp-content/uploads/2016/09/Innowood-brochure-2013spread.pdf · engineers to assist you to design and customize your

Maintenance CoatingINNOWOOD - wood composite products are like any wood product, coating is required depending upon location to sun or how much pedestrian traffic it attracts. If INNOWOOD is not applied with a coating, when exposed to UV, INNOWOOD will oxidise and show discolouration, the colour will revert to its silver / grey colour, however it can be and revived by re-coating or stained should this be desired.

Best protection of INNOWOOD board is ensured by applying the coating prior to installation.

To apply a maintenance coat, First indication of the need for recoating will be observed as patchiness or discolorations. Clean the surface of the board’s prior to applying a new coat, lightly sand the surface using 120 to 180 grit sand paper (test small area first), wash INNOWOOD thoroughly with Methylated Spirits allow to evaporate and recoat with InnoCoat as per application instructions on the container.

Material Handling Guidelines / StorageINNOWOOD boards should not be stored in the open or covered wrapped with plastic sheet, INNOWOOD board is finished product, do not dump or drop when loading or unloading.

INNOWOOD boards should be carried on its edge, for better support.

When removing INNOWOOD boards, do not slide boards against each other, lift the boards and set them down.

INNOWOOD boards should be unpacked, stored in dry and flat surface supported at 600mm centre.

When handling INNOWOOD boards take care to minimize scratches, nicks or to prevent damage the boards.

INNOWOOD board should be stored under cover until ready to install.

Finish & ColourINNOWOOD has a look and feel that is very similar to natural timber. Supplied with a smooth or brushed surface finish, your INNOWOOD product is available in

your choice of a wide range of natural wood grain timber colours.

INNOWOOD’s original mill finish is uncoated, which is suitable for indoor applications. To extend the life of your INNOWOOD product and retain its colour,the application of a water-based, UV protective composite timber sealer is recommended.

InnoCoat is a water-based UV protective composite timber sealer that has been specifically formulated to protect the surface, reduce the maintenance and extend the life of INNOWOOD products.

When InnoCoat is applied to INNOWOOD products that are kept outdoors, the coating has a life expectancy of 1-5 years. How long your coating will last depend on the following factors:

• Wear and tear• Amount of sunlight, precipitation

and debris• Foot traffic

It is time to re-apply InnoCoat when your INNOWOOD surface begins to show signs of fading or dullness. We recommend conducting routine 12-monthly maintenance inspections to determine when it’s time to reapply InnoCoat. Quick and easy to apply, InnoCoat will instantly bring back the colour to your INNOWOOD product.

For a slip resistant finish, we recommend you add InnoCoat Grip to the InnoCoat coating.

INNOWOOD mill finish is available in five standard natural wood grain colours.

Care & MaintenanceINNOWOOD is an advanced composite material does not splinter, mildew, is water, fire resistance and termite proof. It is also simple and easy to maintain. INNOWOOD products are low-maintenance material; composite wood requires simple care and handling to ensure lasting integrity. We recommend conducting 6 monthly inspections.

Teak

Iron Bark

Weathered Wood

Spotted Gum

Red Cedar

30 31