SURFACE Finish Solution
5
SURFACE FINISH SOLUTION
description
SURFACE Finish Solution. Attachment for Finishing Material. De-burring the ends. Conclusions. Maroon abrasive disks will be used to De-burr ends De-burr holes Finish the top/side surfaces Disks will be stacked 5-6 deep to fit over entire track profile. - PowerPoint PPT Presentation
Transcript of SURFACE Finish Solution
SURFACE FINISH SOLUTION
Attachment for Finishing Material
De-burring the ends
Conclusions Maroon abrasive disks will be used to
De-burr ends De-burr holes Finish the top/side surfaces
Disks will be stacked 5-6 deep to fit over entire track profile