Supplement to ISO Focus+ · Supplement to ISO Focus+ February 2013 People and places ISO Members 2...

ISO Update

Supplement to ISO Focus+

February 2013

People and places

ISO Members 2

International Standards in processfrom 1 to 31 January 2013

Committee Drafts (CD) registered 3

Draft International Standards (DIS) circulated 4

Final draft International Standards (FDIS) circulated 9

Standards published 11

Standards confirmed 14

Standards withdrawn 16

Meeting calendar 16

People and places

2 ISO Update, Supplement to ISO Focus+– February 2013

ISO Members

Since the January 2013 issue of ISO Update Supplement to ISO Focus+, the following changes affecting ISO members have occurred:

Membership change

Member body

The membership status of the Uganda National Bureau of Standards (UNBS) has been upgraded from correspondent member to member body as from 1 January 2013. Their contact details read as follows:

UGANDA (UNBS)

Uganda National Bureau of Standards (UNBS) Plot M217 Nakawa Industrial Area P.O.Box 6329 KAMPALA

Tel. +256 41 450 59 95 Fax +256 41 428 61 23 E-mail [email protected] Web www.unbs.go.ug

New CEOs

Member body

SWEDEN (SIS)

CEO: Ms Charlotta Nilsson

Correspondent member

LIBERIA (LDS)

Deputy Minister of Commerce and Industry: Mr. Axel Addy

Address changes:

Member bodies

IRAN, ISLAMIC REP. OF (ISIRI)

E-mail [email protected]

KENYA (KEBS)

Tel. +254 20 694 80 00 Fax +254 20 600 96 60

LUXEMBOURG (ILNAS)

Institut luxembourgeois de la normalisation, de l'accréditation, de la sécurité et qualité des produits et services Southlane Tower 1 1, avenue du Swing L-4367 BELVAUX

Tel. +352 24 77 43 00 E-mail [email protected] Web www.ilnas.lu

PAKISTAN (PSQCA)

Pakistan Standards and Quality Control Authority Block-77, Pakistan Secretariat Saddar KARACHI 74400

Tel. +92 21 99 20 62 60 Fax +92 21 99 20 62 63 E-mail [email protected] Web www.psqca.com.pk

ISO Update, Supplement to ISO Focus -- February 2013 3

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Stand-ard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 January to 31 January 2013

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 6 Paper, board and pulps

ISO/CD 5636-6 Paper and board — Determination of air per-meance and air resistance (medium range) — Part 6: Oken method

TC 22 Road vehicles

ISO/CD 8820-1 Road vehicles — Fuse-links — Part 1: Defini-tions and general test requirements

ISO/CD 22901-3

Road vehicles — Open diagnostic data exchange (ODX) — Part 3: Fault symptom exchange description (FXD)

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 23205 Agricultural tractors — Instructional seat

ISO/CD 4254-14

Agricultural machinery — Safety — Part 14: Mounted, semi-mounted and trailed bale wrappers

ISO/CD 18564 Machinery for forestry — Noise measure-ment method — Engineering method (Grade 2 accuracy)

TC 34 Food products

ISO/DTS 18083

Processed cheese products — Calculation of content of added phosphate expressed as phosphorus

ISO/DTS 22002-4

Prerequisite programmes on food safety — Part 4: Food packaging manufacturing

ISO/CD 22004 Food safety management systems — Guid-ance on the application of ISO 22000:2005

TC 38 Textiles

ISO/CD 18184 Textiles — Determination of antiviral activity assay of textile products

TC 43 Acoustics

ISO/CD 389-3 Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators

ISO 10140-3:2010/CD Amd 2

Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation — Amendment 2

TC 45 Rubber and rubber productsISO/CD 17324 Rubber hoses for automotive turbochargers

— Specification

ISO/DTS 16097

Vulcanized crumb rubber — Evaluation procedures

TC 54 Essential oilsISO/CD 16385 Essential oil — Oil of Molle

TC 61 PlasticsISO/CD 16012 Plastics — Determination of linear dimensions

of test specimens

TC 69 Applications of statistical methodsISO/CD 22514-8

Statistical methods in process management — Capability and performance — Part 8: Machine performance of a multi-state production process

TC 70 Internal combustion enginesISO/CD 4548-14

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO/CD 15382 Radiological protection - Procedures for moni-toring the dose to the lens of the eye, the skin and the extremities

ISO/CD 16637 Radiological protection — Monitoring and internal dosimetry for staff exposed to medical radionuclides

ISO/CD 21909-1

Passive neutron dosimetry systems — Part 1: Performance and test requirements for per-sonal dosimetry

TC 92 Fire safetyISO/DTS 14934-4

Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests

TC 98 Bases for design of structuresISO/DTR 12930

Seismic design examples based on ISO 23469

TC 106 DentistryISO/DTS 17988

Dentistry — Corrosion test methods for amalgam

ISO/CD 9693-2 Dentistry - Compatibility testing — -- Part 2: Ceramic-ceramic systems

TC 110 Industrial trucksISO/CD 18063 Rough-terrain trucks — Visibility — Test meth-

ods and their verification

TC 130 Graphic technologyISO/CD 12643-2

Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems

ISO/CD 12643-3

Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems

ISO/CD 12643-4

Graphic technology — Safety requirements for graphic technology equipment and systems — Part 4: Converting equipment and systems

4 ISO Update, Supplement to ISO Focus -- February 2013

TC 137 Footwear sizing designations and marking systems

ISO/DTS 19407

Footwear - Sizing - Conversion of International sizing systems

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/CD 4437-4 Plastics piping systems for the supplyof gase-ous fuels — Polyethylene — Part 4: Valves

TC 142 Cleaning equipment for air and other gases

ISO/CD 16890-1

Air filters for general ventilation — Part 1: Technical specifications, requirements and efficiency classification system based upon Particulate Matter (PM)

TC 146 Air qualityISO/CD 17211 Stationary source emissions — Sampling and

determination of selenium compounds in flue gas

TC 153 ValvesISO/CD 15848-1

Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Part 1: Classification system and qualifica-tion procedures for type testing of valves

ISO/CD 15848-2

Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Part 2: Production acceptance test of valves

TC 172 Optics and photonicsISO/CD 13142 Electro-optical systems — Cavity ring-down

technique for high-reflectance measurement

TC 184 Automation systems and integrationISO/CD 15746-1

Automation systems and integration — Integra-tion of advanced process control and opti-mization for manufaruing systems — Part 1: Framework and functional model

TC 206 Fine ceramicsISO/CD 18061 Fine Ceramics (Advanced Ceramics, Advanced

Technical Ceramics) — Determination of anti-viral activity of semiconducting photocatalytic materials — Test method using bacteriophage Q-beta

ISO/CD 20507 Fine ceramics (advanced ceramics, advanced technical ceramics) — Vocabulary

TC 215 Health informaticsISO/DTR 17791

Health informatics - Guidance on Standards for Enabling Safety in Health Software

ISO/DTR 28380-1

Health informatics — IHE global standards adoption — Part 1: Process

TC 217 CosmeticsISO/CD 15819 Cosmetics — Analytical methods — Ni-

trosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS

ISO/CD 17516 Cosmetics - Microbiological limits

TC 220 Cryogenic vesselsISO/CD 20421-2

Cryogenic vessels — Large transportable vacu-um-insulated vessels — Part 2: Operational requirements

ISO/CD 21009-2

Cryogenic vessels — Static vacuum insulated vessels — Part 2: Operational requirements

TC 238 Solid biofuelsISO/CD 16996 Solid biofuels — Determination of elemental

composition by X-ray fluorescence

TC 254 Safety of amusement rides and amuse-ment devices

ISO/CD 17842-1

Safety of amusement rides and amusement devices — Part 1: Design and manufacture

ISO/CD 17842-2

Safety of amusement rides and amusement devices — Part 2: Operation and use

CASCO Committee on conformity assessment

ISO/IEC DTS 17023

Conformity assessment — Guidelines for determining duration of management system certification audits

JTC 1 Information technology

ISO/IEC CD 24744

Software Engineering — Metamodel for Devel-opment Methodologies

ISO/IEC CD 18745-2

Test methods for machine readable travel documents (MRTD) — Part 2: Test methods for the contactless interface

ISO/IEC CD 17960

Information technology — Programming languages, their environments and system software interfaces — Code signing for source code

ISO/IEC CD 17961

Information Technology — Programming languages, their environments and system soft-ware interfaces — C Secure Coding Rules

ISO/IEC 14496-27:2009/PDAM 5

Information technology — Coding of audio-visual objects — Part 27: 3D Graphics con-formance — Amendment 5: Conformance for multi-resolution 3D mesh compression

ISO/IEC 23000-11:2009/PDAM 3

Information technology — Multimedia applica-tion format (MPEG-A) — Part 11: Stereoscopic video application format — Amendment 3: Support movie fragment for Stereoscopic Video AF

ISO/IEC CD 23001-9

Information technology — MPEG systems technologies — Part 9: Common encryption of MPEG-2 transport streams

ISO/IEC 23002-5/PDAM 1

Information technology — MPEG video technologies — Part 5: Reconfigurable media coding conformance and reference software — Amendment 1: Graphics tool library (GTL) refer-ence software and conformance

ISO/IEC CD 15944-20

Information technology — Business Operation-al View — Part 20: Linking business operational view to functional service view

ISO/IEC PDTR 29196

Guidance for Biometric Enrolment

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

IIW International Institute of Welding

ISO/DIS 10447 * Resistance welding — Peel and chisel testing of resistance spot and projection welds

2013-06-18

(Revision of ISO 10447:2006)


ISO/DIS 14272 * Specimen dimensions and pro-cedure for cross tension testing resistance spot and embossed projection welds

2013-06-18


ISO/DIS 14273 * Specimen dimensions and pro-cedure for shear testing resist-ance spot, seam and embossed projection welds

2013-06-18


ISO/DIS 14323 * Resistance spot welding and projection welds — Destructive testing of welds — Specimen dimensions and procedure for impact shear test and cross-tension testing

2013-06-18


ISO/DIS 14373 * Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels

2013-06-18


TC 4 Rolling bearings

ISO 10317:2008/DAmd 1

* Rolling bearings — Tapered roller bearings — Designation system — Amendment 1

2013-04-30


ISO/DIS 14453 * Pulps — Determination of acetone-soluble matter 2013-06-11


ISO/DIS 12625-3

* Tissue paper and tissue prod-ucts — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk

2013-06-11

(Revision of ISO 12625-3:2005)

TC 8 Ships and marine technology

ISO/DIS 17357-1

* Ships and marine technology - Floating pneumatic rubber fend-ers — Part 1: High pressure

2013-04-14

(Revision of ISO 17357:2002, ISO/NP 17357)

ISO/DIS 17357-2

* Ships and marine technology - Floating pneumatic rubber fend-ers — Part 2: Low pressure

2013-04-14

(Revision of ISO 17357:2002, ISO/NP 17357)

ISO/DIS 14886 * Ships and marine technology - Large Yachts - Structural fire protection for FRP yachts

2013-04-17

TC 17 Steel

ISO/DIS 5002 * Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities

2013-05-01


TC 22 Road vehicles

ISO/DIS 8820-5

* Road vehicles — Fuse-links — Part 5: Fuse-links with axial ter-minals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures

2013-04-10


ISO/DIS 15031-7

* Road vehicles — Communica-tion between vehicle and exter-nal equipment for emissions-re-lated diagnostics — Part 7: Data link security

2013-04-08


ISO/DIS 16552 * Heavy commercial vehicles and buses — Stopping distance in straight-line braking with ABS — Open loop and closed loop test methods

2013-04-04

ISO/DIS 15007-1

* Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters(Revision of ISO 15007-1:2002)

ISO/DIS 12614-1

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 1: General requirements and definitions

2013-04-17

ISO/DIS 12614-2

* Road vehicles — Liquefied natu-ral gas (LNG) fuel system com-ponents — Part 2: Performance and general test methods

2013-04-17

ISO/DIS 12614-3

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 3: Check valve

2013-04-17

ISO/DIS 12614-4

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 4: Manual valve

2013-04-17

ISO/DIS 12614-5

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 5: Tank pressure gauge

2013-04-17

ISO/DIS 12614-6

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 6: Overpres-sure regulator

2013-04-17

ISO/DIS 12614-7

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 7: Pressure relief valve

2013-04-17

ISO/DIS 12614-8

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 8: Excess flow valve

2013-04-17

ISO/DIS 12614-9

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 9: Gas-tight housing and ventilation hose

2013-04-17

ISO/DIS 12614-10

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 10: Rigid fuel line in stainless steel

2013-04-17

ISO/DIS 12614-11

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 11: Fittings

2013-04-17

ISO/DIS 12614-12

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 12: Rigid fuel line in material other than stainless steel

2013-04-17

ISO/DIS 12614-13

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 13: Pressure control regulator

2013-04-17

ISO/DIS 12614-14

* Road vehicles — Liquefied natu-ral gas (LNG) fuel system com-ponents — Part 14: Differential pressure fuel content gauge

2013-04-17

ISO/DIS 12614-15

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 15: Capaci-tance fuel content gauge

2013-04-17


ISO/DIS 12614-16

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 16: Heat exchanger - vaporizer

2013-04-17

ISO/DIS 12614-17

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 17: Natural gas detector

2013-04-17

ISO/DIS 12614-18

* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 18: Gas temperature sensor

2013-04-17

ISO/DIS 16380 * Road Vehicles — Blended Fuels Refuelling Connector 2013-04-13


ISO/DIS 16122-1.2

* Agricultural and forestry machin-ery — Inspection of sprayers in use — Part 1: General

2013-06-11

ISO/DIS 16122-2.2

* Agricultural and forestry machin-ery — Inspection of sprayers in use — Part 2: Horizontal boom sprayers

2013-06-11

ISO/DIS 16122-3.2

* Agricultural and forestry machin-ery — Inspection of sprayers in use — Part 3: Vertical boom sprayers, mistblowers and similar

2013-06-11

TC 31 Tyres, rims and valves

ISO/DIS 5775-2

* Bicycle tyres and rims — Part 2: Rims 2013-04-09

(Revision of ISO 5775-2:1996, ISO 5775-2:1996/Amd 1:2001)

TC 34 Food products

ISO/DIS 16140-1

* Microbiology of food and animal feed - Method validation — Part 1: Vocabulary

2013-06-11


ISO/DIS 16140-2

* Microbiology of food and animal feed - Method validation — Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method

2013-06-11


ISO/DIS 17468 * Microbiology of food and animal feed - Technical requirements and guidance on establishment or revision of standard methods

2013-06-11

ISO 8589:2007/DAmd 1

* Sensory analysis — General guidance for the design of test rooms — Amendment 1

2013-06-11

TC 44 Welding and allied processes

ISO/DIS 23277 * Non-destructive testing of welds — Penetrant testing of welds — Acceptance levels

2013-06-25


ISO/DIS 23278 * Non-destructive testing of welds — Magnetic particle testing of welds — Acceptance levels

2013-06-25


ISO/DIS 669 * Resistance welding — Re-sistance welding equipment — Mechanical and electrical requirements

2013-06-11


TC 54 Essential oils

ISO/DIS 3218 * Essential oils — Principles of nomenclature 2013-06-25


TC 61 Plastics

ISO/DIS 16365-1

* Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designa-tion system and basis for specifications

2013-04-16

ISO/DIS 16365-2

* Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determi-nation of properties

2013-04-16

ISO/DIS 16365-3

* Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 3: Distinction between ether and ester polyu-rethanes by determination of the ester group content

2013-04-16

TC 69 Applications of statistical methods

ISO/DIS 13528 * Statistical methods for use in proficiency testing by interlabo-ratory comparisons

2013-04-23


TC 72 Textile machinery and accessories

ISO/DIS 21485 * Textile machinery — Draw frame for cotton spinning — Vocabulary and principles of construction

2013-04-25


ISO 9902-1:2001/DAmd 2

* Textile machinery — Noise test code — Part 1: Common re-quirements — Amendment 2

2013-06-11

ISO 9902-2:2001/DAmd 2

* Textile machinery — Noise test code — Part 2: Spinning pre-paratory and spinning machinery — Amendment 2

2013-06-11

ISO 9902-3:2001/DAmd 2

* Textile machinery — Noise test code — Part 3: Nonwoven ma-chinery — Amendment 2

2013-06-11

ISO 9902-4:2001/DAmd 2

* Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2

2013-06-11

ISO 9902-5:2001/DAmd 2

* Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery — Amendment 2

2013-06-11

ISO 9902-6:2001/DAmd 2

* Textile machinery — Noise test code — Part 6: Fabric manufac-turing machinery — Amendment 2

2013-06-11

ISO 9902-7:2001/DAmd 2

* Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery — Amend-ment 2

2013-06-11

TC 83 Sports and recreational equipment

ISO/DIS 9523 * Touring ski-boots for adults — Interface with touring ski-bind-ings — Requirements and test methods

2013-04-17



TC 85 Nuclear energy, nuclear technologies, and radio-logical protection

ISO/ASTM DIS 51275

* Practice for use of a radiochro-mic film dosimetry system 2013-04-04

(Revision of ISO/ASTM 51275:2004)

ISO/ASTM DIS 51607

* Practice for use of the alanine-EPR dosimetry system 2013-04-04


ISO/ASTM DIS 51650

* Practice for use of a cellulose triacetate dosimetry system 2013-04-04


ISO/ASTM DIS 51818

* Practice for dosimetry in an elec-tron beam facility for radiation processing at energies between 80 and 300 keV

2013-04-04


TC 89 Wood-based panels

ISO/DIS 1954 * Plywood — Tolerances on dimensions 2013-04-16


TC 96 Cranes

ISO/DIS 10245-2

* Cranes — Limiting and indicating devices — Part 2: Mobile cranes 2013-04-16


TC 106 Dentistry

ISO/DIS 24234 * Dentistry — Dental amalgam2013-06-18

(Revision of ISO 24234:2004, ISO 24234:2004/Amd 1:2011)

TC 110 Industrial trucks

ISO/DIS 22915-22

* Industrial trucks — Verification of stability — Part 22: Lateral- and front-stacking trucks with elevat-ing operator position

2013-04-13

TC 121 Anaesthetic and respiratory equipment

ISO/DIS 8836 * Suction catheters for use in the respiratory tract


TC 126 Tobacco and tobacco products

ISO/DIS 3550-3

* Cigarettes — Determination of loss of tobacco from the ends — Part 3: Method using a vibro-bench

2013-04-04

TC 127 Earth-moving machinery

ISO/DIS 17253 * Earth-moving machines and rough-terrain variable reach trucks - Design requirements for machines intended to be driven on the road

2013-04-03

ISO/DIS 15818 * Earth-moving machinery — Lifting and tying-down attach-ment points — Performance requirements

2013-04-03

TC 135 Non-destructive testing

ISO/DIS 12715 * Non-destructive testing - Ultra-sonic testing - Reference blocks and test procedures for the characterization of contact probe sound beams

2013-04-11


TC 147 Water quality

ISO/DIS 5667-6

* Water quality — Sampling — Part 6: Guidance on sampling of rivers and streams

2013-04-14


TC 164 Mechanical testing of metals

ISO/DIS 16808 * Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve ny means of bulge test with optical measuring systems

2013-06-11

ISO/DIS 16842 * Metallic materials — Sheet and strip — Biaxial tensile test-ing method using cruciform specimen

2013-04-11

ISO/DIS 17340 * Metallic materials — Ductility testing — High speed compres-sion test for porous and cellular metals

2013-04-06

TC 165 Timber structures

ISO/DIS 10983 * Timber — Finger joints — Mini-mum production requirements and testing methods

2013-04-29


ISO/DIS 17754 * Torsional resistance of driving in screws 2013-04-25

TC 173 Assistive products for per-sons with disability

ISO/DIS 16840-3

* Wheelchair seating — Part 3: Determination of static, impact and repetitive load strengths for postural support devices

2013-04-23


ISO/DIS 17049 * Accessible design — Application of braille on signage, equipment and appliances

2013-04-24

TC 184 Automation systems and integration

ISO/DIS 8000-100

* Data quality — Part 100: Master data: Overview 2013-04-24

(Revision of ISO/TS 8000-100:2009)

ISO/DIS 8000-120

* Data quality — Part 120: Master data: Exchange of characteristic data: Provenance

2013-04-24


ISO/DIS 8000-130

* Data quality — Part 130: Master data: Exchange of characteristic data: Accuracy

2013-04-24


ISO/DIS 8000-140

* Data quality — Part 140: Master data: Exchange of characteristic data: Completeness

2013-04-24



TC 206 Fine ceramics

ISO/DIS 17172 * Fine ceramics (advanced ceramics, advanced techni-cal ceramics) — Determination of compaction properties of ceramic powders

2013-04-22

TC 213 Dimensional and geometri-cal product specifications and verification

ISO/DIS 16610-30

* Geometrical product specifica-tions (GPS) — Filtration — Part 30: Robust profile filters: Basic concepts

2013-04-09


ISO/DIS 16610-32

* Geometrical product specifica-tions (GPS) — Filtration — Part 32: Robust profile filters: Spline filters

2013-04-09


ISO/DIS 25178-1

* Geometrical product specifica-tions (GPS) — Surface texture: Areal — Part 1: Indication of surface texture

2013-06-25

ISO/DIS 25178-606

* Geometrical product specifica-tion (GPS) — Surface texture: Areal — Part 606: Nominal char-acteristics of non-contact (focus variation) instruments

2013-04-25

TC 216 Footwear

ISO/DIS 10734 * Footwear — Test method for slide fasteners — Strength of slide fastener pullers

2013-06-18

ISO/DIS 10750 * Footwear — Test method for slide fasteners — Attachment strength of end stops

2013-06-18

ISO/DIS 10751 * Footwear — Test methods for slide fasteners — Resistance to repeated opening and closing

2013-06-18

ISO/DIS 10764 * Footwear — Test methods for slide fasteners — Lateral strength

2013-06-18

ISO/DIS 17694 * Footwear — Test methods for uppers and lining — Flex resistance

2013-06-18


ISO/DIS 17697 * Footwear — Test methods for uppers, lining and insocks — Seam strength

2013-06-18


ISO/DIS 17698 * Footwear — Test methods for uppers — Delamination resistance

2013-06-18


ISO/DIS 18403 * Footwear — Test methods for slide fasteners — Resistance to damage during closure under a lateral force

2013-06-18

ISO/DIS 22649 * Footwear — Test methods for insoles and insocks — Water absorption and desorption

2013-06-18


TC 223 Societal security

ISO/DIS 22322 * Societal security — Emergency management — Public warning 2013-04-10

TC 226 Materials for the produc-tion of primary aluminium

ISO/DIS 10143 * Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules

2013-04-29


TC 238 Solid biofuels

ISO/DIS 16559 * Solid biofuels — Terminology, definitions and descriptions

ISO/DIS 16948 * Solid biofuels — Determination of total content of carbon, hydro-gen and nitrogen

ISO/DIS 16967 * Solid biofuels — Determination of major elements

ISO/DIS 16968 * Solid biofuels — Determination of minor elements


ISO/IEC DIS 29182-3

* Reference architecture for sen-sor network applications and services — Part 3: Reference architecture views

2013-04-15

ISO/IEC DIS 29182-4

* Information technology - Sen-sor networks: Sensor Network Reference Architecture (SNRA) — Part 4: Entity models

2013-04-08

ISO/IEC DIS 29182-5

* Information technology - Sen-sor Networks: Sensor Network Reference Architecture (SNRA) — Part 5: Interface definitions

2013-04-08

ISO/IEC 10646:2012/DAmd 2

* Information technology — Uni-versal Coded Character Set (UCS) — Amendment 2: Cauca-sian Albanian, Psalter Pahlavi, Old Hungarian, Mahajani, Grantha, Modi, Pahawh Hmong, Mende, and other characters

2013-04-26

ISO/IEC DIS 29145-1

* Information technology - Wire-less Beacon-enabled Energy Ef-ficient Mesh network (WiBEEM) for wireless home network services — Part 1: PHY Layer

2013-04-09

ISO/IEC DIS 29145-2

* Information Technology - Wire-less Beacon-enabled Energy Ef-ficient Mesh network (WiBEEM) for wireless home network services — Part 2: MAC Layer

2013-04-09

ISO/IEC DIS 29145-3

* Information technology - Wire-less Beacon-enabled Energy Ef-ficient Mesh network (WiBEEM) for wireless home network services — Part 3: NWK Layer

2013-04-09

ISO/IEC DIS 20008-1

* Information technology — Secu-rity techniques — Anonymous digital signatures — Part 1: General

2013-04-17

ISO/IEC DIS 20008-2

* Information technology — Se-curity techniques — Anony-mous digital signature — Part 2: Mechanisms using a group public key

2013-04-17

ISO/IEC DIS 20009-1

* Information technology — Secu-rity techniques — Anonymous entity authentication — Part 1: General

2013-04-15


ISO/IEC DIS 20009-2

* Information technology — Secu-rity techniques — Anonymous entity authentication — Part 2: Mechanisms based on signa-tures using a group public key

2013-04-15

ISO/IEC DIS 27001

* Information technology — Se-curity techniques — Information security management systems — Requirements

2013-04-17

(Revision of ISO/IEC 27001:2005)

ISO/IEC DIS 27002

* Information technology — Se-curity techniques — Code of practice for information security controls

2013-04-17

(Revision of ISO/IEC 27002:2005)

ISO/IEC DIS 27033-4

* Information technology — Secu-rity techniques — Network secu-rity — Part 4: Securing com-munications between networks using security gateways

2013-04-17

(Revision of ISO/IEC 18028-3:2005)

ISO/IEC DIS 27033-5

* Information technology — Secu-rity techniques — Network secu-rity — Part 5: Securing commu-nications across networks using Virtual Private Network (VPNs)

2013-04-17

ISO/IEC DIS 27036-1

* Information technology — Se-curity techniques — Information security for supplier relation-ships — Part 1: Overview and concepts

2013-04-18

ISO/IEC DIS 27036-2

* Information technology — Se-curity techniques — Information security for supplier relationships — Part 2: Common requirements

2013-04-18

ISO/IEC DIS 27036-3

* Information technology — Se-curity techniques — Information security for supplier relationships — Part 3: Guidelines for ICT sup-ply chain security

2013-04-23

ISO/IEC DIS 27038

* Information technology — Secu-rity techniques — Specification for Digital Redaction

2013-04-15

ISO/IEC DIS 29101

* Information technology — Se-curity techniques — Privacy architecture framework

2013-04-17

ISO/IEC DIS 30111

* Information technology - Secu-rity techniques - Vulnerability handling processes

2013-04-15

ISO/IEC DIS 11160-2

* Information technology — Office equipment — Minimum informa-tion to be included in specifica-tion sheets — Printers — Part 2: Class 3 and Class 4 printers

2013-04-08


ISO/IEC 14496-1:2010/DAmd 2

* Information technology — Cod-ing of audio-visual objects — Part 1: Systems — Amendment 2: Support for raw audio-visual data

ISO/IEC 14496-15:2010/DAmd 2

* Information technology — Cod-ing of audio-visual objects — Part 15: Advanced Video Coding (AVC) file format — Amendment 2: Carriage of high-efficiency video coding (HEVC)

2013-04-15

ISO/IEC 23003-3:2012/DAmd 1

* Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 1: Conformance

2013-04-15

ISO/IEC 23003-3:2012/DAmd 2

* Information technology — MPEG audio technologies — Part 3: Unified speech and audio cod-ing — Amendment 2: Reference software

2013-04-15

ISO/IEC DIS 23006-2

* Information technology - Multi-media service platform technolo-gies - Part 2: MPEG extensible middleware (MXM) API — Part 2: MPEG extensible middleware (MXM) API

2013-04-16

(Revision of ISO/IEC CD 23006, ISO/IEC 23006-2:2011)

ISO/IEC DIS 23006-3

* IInformation technology - Multi-media service platform technolo-gies — Part 3: Conformance and reference software

2013-04-16


ISO/IEC DIS 15426-2

* Information technology — Au-tomatic identification and data capture techniques — Bar code verifier conformance specifica-tion — Part 2: Two-dimensional symbols

2013-04-29

(Revision of ISO/IEC 15426-2:2005, ISO/IEC 15426-2:2005/Cor 1:2008)

ISO/IEC DIS 18000-7

* Information technology — Radio frequency identification for item management — Part 7: Param-eters for active air interface com-munications at 433 MHz

2013-04-17


ISO/IEC DIS 24730-1

* Information technology — Real-time locating systems (RTLS) — Part 1: Application program interface (API)

2013-04-03


ISO/IEC 19794-8:2011/DAmd 1

* Information technology — Bio-metric data interchange formats — Part 8: Finger pattern skeletal data — Amendment 1: Conform-ance testing methodology

2013-04-26

ISO/IEC DIS 29109-5

* Information technology — Con-formance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 5: Face image data

2013-04-29


FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

TC 22 Road vehicles

ISO 16850:2007/FDAmd 1

* Road vehicles — Pedestrian protection — Child head impact test method — Amendment 1

2013-03-18



ISO/FDIS 5700 * Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions

2013-03-24


ISO/FDIS 4254-1

* Agricultural machinery — Safety — Part 1: General requirements 2013-03-25


TC 27 Solid mineral fuels

ISO/FDIS 579 * Coke — Determination of total moisture 2013-03-12


ISO/FDIS 975 * Brown coals and lignites — De-termination of yield of benzene-soluble extract — Semi-auto-matic method

2013-03-12


ISO/FDIS 5071-1

* Brown coals and lignites — De-termination of the volatile matter in the analysis sample — Part 1: Two-furnace method

2013-03-12


ISO/FDIS 5072 * Brown coals and lignites — Determination of true relative density and apparent relative density

2013-03-12


ISO/FDIS 5073 * Brown coals and lignites — De-termination of humic acids 2013-03-12


TC 28 Petroleum products and lubricants

ISO 4264:2007/FDAmd 1

* Petroleum products — Calcula-tion of cetane index of middle-distillate fuels by the four-varia-ble equation — Amendment 1

2013-03-11

TC 29 Small tools

ISO/FDIS 6344-3

* Coated abrasives — Grain size analysis — Part 3: Determina-tion of grain size distribution of microgrits P240 to P2500

2013-03-10

(Revision of ISO 6344-3:1998, ISO 6344-3:1998/Cor 1:1999)

TC 34 Food products

ISO/FDIS 16297

* Milk — Bacterial count — Proto-col for the evaluation of alterna-tive methods

2013-03-16

ISO 21570:2005/FDAmd 1

* Foodstuffs — Methods of analysis for the detection of ge-netically modified organisms and derived products — Quantitative nucleic acid based methods — Amendment 1

2013-03-11

ISO 24276:2006/FDAmd 1

* Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived products — General requirements and definitions — Amendment 1

2013-03-11

TC 43 Acoustics

ISO/FDIS 3095 * Acoustics — Railway applica-tions — Measurement of noise emitted by railbound vehicles(Revision of ISO 3095:2005)

TC 58 Gas cylinders

ISO 15245-1:2001/FDAmd 1

* Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 1: Specification — Amendment 1

ISO/FDIS 11439

* Gas cylinders — High pressure cylinders for the on-board stor-age of natural gas as a fuel for automotive vehicles

2013-03-18


TC 60 Gears

ISO/FDIS 1328-1

* Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allow-able values of deviations relevant to flanks of gear teeth

2013-03-25


TC 61 Plastics

ISO/FDIS 11357-2

* Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and glass transition step height

2013-03-26


TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO/FDIS 1920-11

* Testing of concrete — Part 11: Determination of the chloride resistance of concrete, unidirec-tional diffusion

2013-03-23

ISO/FDIS 28841

* Guidelines for simplified seismic assessment and rehabilitation of concrete buildings

2013-03-18

ISO/FDIS 28842

* Guidelines for simplified design of reinforced concrete bridges 2013-03-18

TC 86 Refrigeration and air-conditioning

ISO/FDIS 16358-1

* Air-cooled air conditioners and air-to-air heat pumps — Test-ing and calculating methods for seasonal performance factors — Part 1: Cooling seasonal performance factor

2013-03-16

ISO/FDIS 16358-2

* Air-cooled air conditioners and air-to-air heat pumps — Test-ing and calculating methods for seasonal performance factors — Part 2: Heating seasonal performance factor

2013-03-16

ISO/FDIS 16358-3

* Air-cooled air conditioners and air-to-air heat pumps — Test-ing and calculating methods for seasonal performance factors — Part 3: Annual performance factor

2013-03-16

TC 94 Personal safety -- Pro-tective clothing and equipment

ISO/FDIS 13688

* Protective clothing — General requirements 2013-03-25


TC 106 Dentistry

ISO/FDIS 29022

* Dentistry — Adhesion — Notched-edge shear bond strength test

2013-03-11


ISO/FDIS 3630-2

* Dentistry — Endodontic instru-ments — Part 2: Enlargers 2013-03-11



ISO/FDIS 7130 * Earth-moving machinery — Operator training — Content and methods

2013-03-24


TC 131 Fluid power systems

ISO/FDIS 6358-1

* Pneumatic fluid power — Deter-mination of flow-rate charac-teristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow(Revision of ISO 6358:1989, ISO/DIS 6358-2.2)

ISO/FDIS 6358-2

* Pneumatic fluid power — Deter-mination of flow-rate charac-teristics of components using compressible fluids — Part 2: Alternative test methods

2013-03-18

(Revision of ISO 6358:1989, ISO/DIS 6358-3.2, ISO/DIS 6358-4.2)


ISO/FDIS 11297-1

* Plastics piping systems for reno-vation of underground drainage and sewerage networks under pressure — Part 1: General

2013-03-18

ISO/FDIS 11297-3

* Plastics piping systems for reno-vation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes

2013-03-18

TC 145 Graphical symbols

ISO 7010:2011/FDAmd 115

* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 115: Safety sign E024: Evacuation temporary refuge

2013-03-26

TC 153 Valves

ISO/FDIS 28921-1

* Industrial valves — Isolating valves for low-temperature applications — Part 1: Design, manufacturing and production testing

2013-03-17


ISO/FDIS 9787 * Robots and robotic devices — Coordinate systems and motion nomenclatures

2013-03-24


ISO/FDIS 20140-1

* Automation systems and integration — Evaluating energy efficiency and other factors of manufacturing systems that influence the environment — Part 1: Overview and general principles

2013-03-24

TC 185 Safety devices for protec-tion against excessive pressure

ISO/FDIS 4126-7

* Safety devices for protection against excessive pressure — Part 7: Common data

2013-03-25

(Revision of ISO 4126-7:2004, ISO 4126-7:2004/Cor 1:2006)

TC 198 Sterilization of health care products

ISO/FDIS 11137-2

* Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose

2013-04-25


ISO 13408-1:2008/FDAmd 1

* Aseptic processing of health care products — Part 1: General requirements — Amendment 1

2013-03-18

TC 215 Health informatics

ISO/FDIS 17090-1

* Health informatics — Public key infrastructure — Part 1: Overview of digital certificate services

2013-03-18


ISO/FDIS 21549-1

* Health informatics — Patient healthcard data — Part 1: Gen-eral structure(Revision of ISO 21549-1:2004)

IULTCS International Union of Leather Technologists and Chemists Societies

ISO/FDIS 17130

* Leather - Physical and me-chanical tests - Determination of dimensional change

2013-03-25

ISO/FDIS 17502

* Leather — Determination of surface reflectance 2013-03-25


ISO/IEC FDIS 26550

* Software and Systems Engi-neering - Reference model for product line engineering and management

2013-03-22

ISO/IEC 15444-2:2004/FDAmd 3

* Information technology — JPEG 2000 image coding system: Extensions — Part 2: — Amend-ment 3: Box-based file format for JPEG XR, extended ROI boxes, XML boxing, compressed channel definition boxes, and representation of floating point

2013-03-29

ISO/IEC FDIS 23005-3

* Information technology — Media context and control — Part 3: Sensory information

2013-03-22


Standards published

New International Standards published between 01 January and 31 January 2013


** French version of standard previously published in English only

Price group

TC 2 Fasteners

ISO 898-1:2013

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

U


TC 4 Rolling bearings

ISO 3228:2013 Rolling bearings — Cast and pressed housings for insert bearings — Bound-ary dimensions and tolerances

H


ISO 11093-8:2012/Cor 1:2013

* Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis — Techni-cal Corrigendum 1

free


ISO 16425:2013

* Ships and marine technology — Guidelines for the installation of ship communication networks for shipboard equipment and systems

V

ISO 16145-4:2013

* Ships and marine technology — Pro-tective coatings and inspection method — Part 4: Automated measuring method for the total amount of water-soluble salts

C

TC 17 Steel

ISO 7452:2013 * Hot-rolled steel plates — Tolerances on dimensions and shape G

ISO 13270:2013

* Steel fibres for concrete — Definitions and specifications J

TC 21 Equipment for fire protection and fire fighting

ISO 7240-23:2013

* Fire detection and alarm systems — Part 23: Visual alarm devices S

TC 22 Road vehicles

ISO 14229-3:2012

* Road vehicles — Unified diagnostic services (UDS) — Part 3: Unified diag-nostic services on CAN implementation (UDSonCAN)

H

ISO 17458-1:2013

* Road vehicles — FlexRay commu-nications system — Part 1: General information and use case definition

M

ISO 17458-2:2013

* Road vehicles — FlexRay communica-tions system — Part 2: Data link layer specification

XH

ISO 17458-3:2013

* Road vehicles — FlexRay communica-tions system — Part 3: Data link layer conformance test specification

XP

ISO 17458-4:2013

* Road vehicles — FlexRay communica-tions system — Part 4: Electrical physi-cal layer specification

XD

ISO 17458-5:2013

* Road vehicles — FlexRay commu-nications system — Part 5: Electri-cal physical layer conformance test specification

XQ

ISO/TR 12353-3:2013

* Road vehicles — Traffic accident analysis — Part 3: Guidelines for the interpretation of recorded crash pulse data to determine impact severity

U

ISO/TR 13330:2013

* Road vehicles — Calculation pro-cesses for the neck injury criteria in rear impact

K

ISO 23274-1:2013

* Hybrid-electric road vehicles — Ex-haust emissions and fuel consumption measurements — Part 1: Non-external-ly chargeable vehicles

N

TC 23 Tractors and machinery for agri-culture and forestry

ISO 3776-2:2013

* Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements

D

ISO 13693-1:2013

* Irrigation equipment — Safety devices for chemigation — Part 1: Small plas-tics valves for chemigation

L

TC 29 Small toolsISO 603-18:2013

* Bonded abrasive products — Dimen-sions — Part 18: Grinding wheels for flat glass edge grinding machines

C

ISO 1832:2012 Indexable inserts for cutting tools — Designation M

TC 33 RefractoriesISO 5017:2013 * Dense shaped refractory products —

Determination of bulk density, apparent porosity and true porosity

D

TC 34 Food productsISO 17715:2013

* Flour from wheat (Triticum aestivum L.) — Amperometric method for starch damage measurement

G

ISO/TS 22002-2:2013

Prerequisite programmes on food safety — Part 2: Catering J

TC 35 Paints and varnishesISO 3233-1:2013

Paints and varnishes — Determina-tion of the percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle

F

ISO 4628-8:2012

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appear-ance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect

D

ISO 16482-1:2013

* Binders for paints and varnishes — De-termination of the non-volatile-matter content of aqueous rosin-resin disper-sions — Part 1: Oven method

B

ISO 16482-2:2013

* Binders for paints and varnishes — De-termination of the non-volatile-matter content of aqueous rosin-resin disper-sions — Part 2: Microwave method

B

TC 37 Terminology and other language and content resources

ISO 22274:2013

* Systems to manage terminology, knowledge and content — Concept-related aspects for developing and internationalizing classification systems

U

TC 44 Welding and allied processesISO 16338:2013

* Welding for aerospace applications — Resistance spot and seam welding R

ISO 17636-1:2013

Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film

P

ISO 17636-2:2013

Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors

U

TC 45 Rubber and rubber productsISO 1432:2013 Rubber, vulcanized or thermoplastic

— Determination of low-temperature stiffening (Gehman test)

F

ISO 2285:2013 Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under con-stant tensile load

G


TC 58 Gas cylinders

ISO 19078:2013

* Gas cylinders — Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles

P

ISO 21007-2:2013

Gas cylinders — Identification and marking using radio frequency identi-fication technology — Part 2: Num-bering schemes for radio frequency identification

T

TC 59 Buildings and civil engineering works

ISO 15928-5:2013

* Houses — Description of performance — Part 5: Operating energy F

TC 61 Plastics

ISO 472:2013 * Plastics — VocabularyK

ISO 6427:2013 * Plastics — Determination of matter extractable by organic solvents (con-ventional methods)

H

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO 23936-2:2011

Petroleum, petrochemical and natural gas industries — Non-metallic materi-als in contact with media related to oil and gas production — Part 2: Elastomers

V

ISO 13503-3:2005

Petroleum and natural gas industries — Completion fluids and materials — Part 3: Testing of heavy brines

S

ISO 19901-4:2003

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 4: Geotechnical and foundation design considerations

Q

ISO 19901-5:2003

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight control during engineering and construction

T

TC 87 Cork

ISO 16419:2013

Cork — Visual anomalies of cork stop-pers for still wines C

ISO 16420:2013

Cork — Cork stoppers for still wines — Mechanical and physical specifications E

TC 107 Metallic and other inorganic coatings

ISO 13826:2013

* Metallic and other inorganic coatings — Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method

F

TC 108 Mechanical vibration, shock and condition monitoring

ISO 18436-1:2012

Condition monitoring and diagnos-tics of machines — Requirements for qualification and assessment of personnel — Part 1: Requirements for assessment bodies and the assess-ment process

F

TC 122 Packaging

ISO 17351:2013

* Packaging — Braille on packaging for medicinal products G

ISO 18601:2013

* Packaging and the environment — General requirements for the use of ISO standards in the field of packaging and the environment

E

ISO 18602:2013

* Packaging and the environment — Op-timization of the packaging system N

ISO 18603:2013

* Packaging and the environment — Reuse F

ISO 18604:2013

* Packaging and the environment — Material recycling J

ISO 18605:2013

* Packaging and the environment — Energy recovery H

ISO 18606:2013

* Packaging and the environment — Organic recycling K

TC 126 Tobacco and tobacco products

ISO 13110:2012

Cigarettes — Determination of menthol in smoke condensates — Gas-chroma-tographic method

D

ISO 7210:2013 Routine analytical cigarette-smoking machine — Additional test methods for machine verification

D


ISO 6747:2013 * Earth-moving machinery — Doz-ers — Terminology and commercial specifications

P

TC 150 Implants for surgery

ISO 14708-7:2013

* Implants for surgery — Active im-plantable medical devices — Part 7: Particular requirements for cochlear implant systems

U

TC 154 Processes, data elements and documents in commerce, indus-try and administration

ISO 17369:2013

* Statistical data and metadata ex-change (SDMX) H

TC 163 Thermal performance and en-ergy use in the built environment

ISO 13788:2012

Hygrothermal performance of building components and building elements — Internal surface temperature to avoid critical surface humidity and interstitial condensation — Calculation methods

R

TC 182 Geotechnics

ISO 22476-1:2012/Cor 1:2013

Geotechnical investigation and testing — Field testing — Part 1: Electrical cone and piezocone penetration test — Technical Corrigendum 1

free

TC 188 Small craft

ISO 16147:2002/Amd 1:2013

* Small craft — Inboard diesel engines — Engine-mounted fuel and electrical components — Amendment 1

XZ

TC 195 Building construction machinery and equipment

ISO 15645:2002/Amd 1:2013

* Road construction and maintenance equipment — Road milling machin-ery — Terminology and commercial specifications — Amendment 1

XZ

ISO 16039:2004/Amd 1:2013

* Road construction and maintenance equipment — Slipform pavers — Defi-nitions and commercial specifications — Amendment 1

XZ


ISO 22242:2005/Amd 1:2013

* Road construction and road main-tenance machinery and equipment — Basic types — Identification and description — Amendment 1

XZ

TC 204 Intelligent transport systems

ISO 17262:2012

Intelligent transport systems — Auto-matic vehicle and equipment identifica-tion — Numbering and data structures

U

ISO/TS 18234-3:2013

* Intelligent transport systems — Traf-fic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 3: Service and network information (TPEG1-SNI)

Q

ISO/TS 18234-11:2013

* Intelligent transport systems — Traffic and Travel Information (TTI) via trans-port protocol experts group, generation 1 (TPEG1) binary data format — Part 11: Location Referencing Container (TPEG1-LRC)

T

TC 210 Quality management and cor-responding general aspects for medical devices

ISO/TS 19218-1:2011/Amd 1:2013

* Medical devices — Hierarchical coding structure for adverse events — Part 1: Event-type codes — Amendment 1

XZ

TC 244 Industrial furnaces and associ-ated processing equipment

ISO 13579-1:2013

Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 1: General methodology

V

ISO 13579-2:2013

Industrial furnaces and associated processing equipment — Method of measuring energy balance and calcu-lating efficiency — Part 2: Reheating furnaces for steel

Q

ISO 13579-3:2013

Industrial furnaces and associated processing equipment — Method of measuring energy balance and calcu-lating efficiency — Part 3: Batch-type aluminium melting furnaces

Q

ISO 13579-4:2013

Industrial furnaces and associated processing equipment — Method of measuring energy balance and calcu-lating efficiency — Part 4: Furnaces with protective or reactive atmosphere

S


ISO/IEC 22536:2013

* Information technology — Telecom-munications and information exchange between systems — Near Field Com-munication Interface and Protocol (NFCIP-1) — RF interface test methods

F

ISO/IEC 27005:2011

Information technology — Security techniques — Information security risk management

V

ISO/IEC 23000-10:2012/Cor 1:2013

* Information technology — Multimedia application format (MPEG-A) — Part 10: Surveillance application format — Technical Corrigendum 1

free

ISO/IEC 18000-6:2013

* Information technology — Radio frequency identification for item man-agement — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General

E

ISO/IEC 18000-63:2013

* Information technology — Radio fre-quency identification for item manage-ment — Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C

XC

ISO/IEC 20944-1:2013

* Information technology — Metadata Registries Interoperability and Bind-ings (MDR-IB) — Part 1: Framework, common vocabulary, and common provisions for conformance

X

ISO/IEC 20944-2:2013

* Information technology — Metadata Registries Interoperability and Bindings (MDR-IB) — Part 2: Coding bindings

N

ISO/IEC 20944-3:2013

* Information technology — Metadata Registries Interoperability and Bindings (MDR-IB) — Part 3: API bindings

U

ISO/IEC 20944-4:2013

* Information technology — Metadata Registries Interoperability and Bindings (MDR-IB) — Part 4: Protocol bindings

H

ISO/IEC 20944-5:2013

* Information technology — Metadata Registries Interoperability and Bindings (MDR-IB) — Part 5: Profiles

J

ISO/IEC 15897:2011/Cor 1:2013

* Information technology — User inter-faces — Procedures for the registra-tion of cultural elements — Technical Corrigendum 1

free

ISO/IEC 17963:2013

* Web Services for Management (WS-Management) Specification XD

Standards confirmed

The following International Standards are confimred for a five year period:

TC 5 Ferrous metal pipes and metallic fittings

ISO 5256:1985 (reconfirmed)











ISO 27991:2008

TC 20 Aircraft and space vehicles

ISO 7689:2008


ISO 16031-1:2002 (reconfirmed)

TC 22 Road vehicles




ISO 12917-1:2002

ISO 12917-2:2002


TC 30 Measurement of fluid flow in closed conduits


ISO/TR 9464:2008

ISO/TR 12767:2007

ISO/TR 15377:2007

TC 33 Refractories














TC 34 Food products




































TC 35 Paints and varnishes


TC 38 Textiles






ISO/TR 581:2005




TC 46 Information and documentation



TC 59 Buildings and civil engineering works



TC 61 Plastics

ISO 12086-1:2006

ISO 12086-2:2006

TC 67 Materials, equipment and offshore structures for petroleum, petro-chemical and natural gas industries

ISO 10424-2:2007

TC 70 Internal combustion engines




TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use


TC 83 Sports and recreational equipment



TC 85 Nuclear energy, nuclear technolo-gies, and radiological protection

ISO 12807:1996


TC 92 Fire safety


TC 100 Chains and chain sprockets for power transmission and conveyors


TC 102 Iron ore and direct reduced iron

ISO 15968:2000

TC 104 Freight containers

ISO 6346:1995

TC 106 Dentistry

ISO/TS 22911:2005

TC 110 Industrial trucks

ISO 22881:2004

TC 113 Hydrometry


ISO/TR 11332:1998 (reconfirmed)

ISO/TR 11627:1998 (reconfirmed)



ISO 3471:2008


ISO 8811:2000

TC 131 Fluid power systems




TC 133 Clothing sizing systems - size des-ignation, size measurement meth-ods and digital fittings



ISO/TR 4191:1989

TC 147 Water quality

ISO/TS 11370:2000 (reconfirmed)


ISO/TS 20281:2006 (reconfirmed)

TC 150 Implants for surgery

ISO 5834-5:2005

TC 171 Document management applications



TC 172 Optics and photonics


TC 173 Assistive products for persons with disability


ISO 16840-2:2007

ISO 17191:2004

TC 176 Quality management and quality assurance

ISO/TS 16949:2009







TC 193 Natural gas

ISO 14532:2001

ISO 6974-6:2002


TC 213 Dimensional and geometrical prod-uct specifications and verification




TC 215 Health informatics

ISO/IEEE 11073-10101:2004

ISO/IEEE 11073-10201:2004

ISO/IEEE 11073-20101:2004

ISO/IEEE 11073-30200:2004

ISO/TS 17117:2002

TC 216 Footwear


CASCO Committee on conformity assessment

ISO/IEC 17021:2011


ISO/IEC 24751-1:2008

Standards withdrawn


TC 22 Road vehicles

ISO 23274:2007 (replaced by ISO 23274-2:2012, ISO 23274-1:2013)


ISO 9091-1:1991 (replaced by )

ISO 9091-2:1992 (replaced by )

TC 34 Food products

ISO 7847:1987 (replaced by )

TC 35 Paints and varnishes

ISO 3233:1998 (replaced by ISO 3233-1:2013)


ISO 17636:2003 (replaced by ISO 17636-1:2013)

TC 154 Processes, data elements and docu-ments in commerce, industry and administration

ISO/TS 17369:2005

(replaced by ISO 17369:2013)

Meeting calendar

(update at 01 January 2013)

Meetings called for the month of February are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

February-March 2013

18-22 Busan (Korea, Republic of)

JTC 1/SC 35 Information technol-ogy/User interfaces

March 2013

3-8 Mexico (Mexico) TC 229 Nanotechnologies

4-8 Toulouse (France)

TC 262 Risk management

11-15 Chiba-Ken (Japan)

TC 210 Quality management and corresponding general aspects for medical devices


12-13 Troy (USA) TC 22/SC 11 Road vehicles/Safety glazing materials

12-14 Berlin (Germany) TC 96/SC 10 Cranes/Design princi-ples and requirements

15 Geneva (Switzerland)

CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

15 Tokyo (Japan) TC 79/SC 11 Light metals and their alloys/Titanium

15 Greenville (USA) TC 192 Gas turbines

19-20 Buxton (United Kingdom)

* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines

19-22 Jeju (Korea, Republic of)

TC 107 Metallic and other inorganic coatings

21 Bangkok (Thailand)

TC 238 Solid biofuels

21-22 Miami (USA) TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes

25-29 Paris (France) TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

26 Geneva (Switzerland)

CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

27-28 Geneva (Switzerland)

COUNCIL Council

April 2013

2-5 Vienna (Austria) TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological pro-tection/Radiological protection

4 Rotterdam (Netherlands)

TC 67/SC 8 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Arctic operations

8-10 London (United Kingdom)

TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

8-12 Madrid (Spain) JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)

8-12 Sydney (Australia)

PC 271 Compliance programs

9 Helsinki (Finland) TC 117 Fans

12 Gaithersburg (USA)

TC 84 Devices for adminis-tration of medicinal products and intra-vascular catheters

12 Paris (France) TC 92/SC 1 Fire safety/Fire initia-tion and growth

15 Peterbor-ough (United Kingdom)

TC 23/SC 2 Tractors and machin-ery for agriculture and forestry/Common tests

15-16 Stuttgart (Germany)

TC 39/SC 4 Machine tools/Wood-working machines

15-19 Seattle (USA) * TC 204 Intelligent transport systems

15-20 Moscow (Rus-sian Federation)

* TC 92/SC 3 Fire safety/Fire threat to people and environment

16-17 Peterbor-ough (United Kingdom)

TC 23/SC 14 Tractors and machin-ery for agriculture and forestry/Operator controls, operator symbols and other displays, operator manuals

16-17 Frankfurt (Germany)

TC 48 Laboratory equipment

17-18 St-Denis (France)

TC 17/SC 3 Steel/Steels for struc-tural purposes

17-18 Xian (China) TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

20 Moscow (Rus-sian Federation)

TC 92/SC 4 Fire safety/Fire safety engineering

21-23 Vancouver (Canada)

TC 34/SC 4 Food products/Cere-als and pulses

21-26 Mexico (Mexico) TC 215 Health informatics

22-23 Lünen (Germany) TC 82 Mining

22-26 Winches-ter (United Kingdom)

JTC 1/SC 37 Information technology/Biometrics

22-26 Berlin (Germany) TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems


** TC 193 Natural gas

23-24 Dresden (Germany)

* TC 219 Floor coverings

25-26 New York (USA) ** TC 178 Lifts, escalators and moving walks

26 Pavia (Italy) TC 194 Biological evaluation of medical devices

26-27 Clausthal-Zeller-feld (Germany)

TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

29-30 Sophia Antipolis (France)

* JTC 1/SC 27 Information tech-nology/IT Security techniques

Salzburg (Austria)

** TC 89 Wood-based panels

(South Africa) ** TC 242 Energy Management

April-May 2013


PC 272 Forensic sciences


TC 110/SC 4 Industrial trucks/Rough-terrain trucks

29-3 Calgary (Canada) TC 251 Project committee: Asset management

May 2013

2 Calgary (Canada) TC 23/SC 19 Tractors and machin-ery for agriculture and forestry/Agricultural electronics


13 Berlin (Germany) TC 29/SC 9 Small tools/Tools with cutting edges made of hard cutting materials

13 Guangzhou (China)

TC 68/SC 2 Financial services/Financial Services, security


TC 68/SC 4 Financial services/Securities and related financial instruments

13-14 Berlin (Germany) ** TC 34/SC 15 Food products/Coffee

13-14 Brussels (Belgium)

TC 122/SC 4 Packaging/Packaging and environment

13-17 Tokyo (Japan) ** TC 114 Horology

13-17 Vienna (Austria) TC 171 Document manage-ment applications

14 Berlin (Germany) TC 29/SC 2 Small tools/High speed steel cut-ting tools and their attachments


* TC 68/SC 7 Financial services/Core banking

14 Burr Ridge (USA) TC 195/SC 1 Building construc-tion machinery and equipment/Machinery and equipment for concrete work

14-17 Burr Ridge (USA) TC 195 Building construc-tion machinery and equipment

15 Santa María de Lamas (Portugal)

* TC 87 Cork

15-16 (Japan) ** TC 22/SC 1 Road vehicles/Ignition equipment

16 Hangzhou (China)

TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation

16 Berlin (Germany) TC 29/SC 8 Small tools/Tools for pressing and moulding


TC 68 Financial services

16-17 Frankfurt (Germany)

TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications

17 Hangzhou (China)

TC 10 Technical product documentation

17 Berlin (Germany) TC 29 Small tools

19-24 Shenzen (China) TC 130 Graphic technology

20-23 Durban (South Africa)

TC 249 Traditional chinese medicine

21-24 Berlin (Germany) TC 43/SC 3 Acoustics/Underwa-ter acoustics

22 Vancouver (Canada)

TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe

22 Stockholm (Sweden)

TC 145/SC 1 Graphical symbols/Public information symbols

22-23 La Valetta (Malta) * COPOLCO Committee on con-sumer policy


TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, sym-bols and colours


* TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment


* TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology


TC 145 Graphical symbols

24 Delft (Netherlands)

TC 158 Analysis of gases

25-31 Montreal (Canada)

JTC 1/SC 7 Information technol-ogy/Software and systems engineering

26-31 Porto (Portugal) TC 228 Tourism and related services

27-29 Bilbao (Spain) * TC 147/SC 3 Water qual-ity/Radioactivity measurements


* TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations

27-31 Paris (France) * TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings

28-31 Helsinki (Finland) TC 257 General technical rules for determina-tion of energy savings in renovation projects, industrial enterprises and regions

30-31 Busan (Korea, Republic of)

* TC 211 Geographic in-formation/Geomatics

31 Shanghai (China) TC 4 Rolling bearings

31 Berlin (Germany) ** TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

June 2013

3-4 Berlin (Germany) ** TC 44/SC 3 Welding and allied processes/Welding consumables

3-6 Milan (Italy) * TC 22/SC 13 Road vehicles/Ergo-nomics applicable to road vehicles

3-7 Auburn Hills (USA)

* TC 22/SC 21 Road vehicles/Electri-cally propelled road vehicles

3-7 Washington, D.C (USA)

* TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

3-7 Copenhagen (Denmark)

TC 42 Photography

3-7 Paris (France) * TC 46/SC 11 Information and doc-umentation/Archives/records management

3-7 Milwaukee (USA) ** TC 69 Applications of statis-tical methods

3-7 San Francisco (USA)

* TC 173/SC 1 Assistive products for persons with disability/Wheelchairs


3-8 Warsaw (Poland) TC 96 Cranes

4-5 Amsterdam (Netherlands)

* TC 259 Project committee: Outsourcing

5 Berlin (Germany) ** TC 29/SC 5 Small tools/Grinding wheels and abrasives

5 Prague (Czech Republic)

** TC 115 Pumps

6 Lysaker (Norway) TC 8/SC 2 Ships and marine technology/Ma-rine environment protection

6 Berlin (Germany) * TC 44/SC 7 Welding and allied processes/Represen-tation and terms

6-7 Milan (Italy) * TC 22/SC 17 Road vehicles/Visibility

9-15 Pretoria (South Africa)

* TC 37 Terminology and other language and content resources

10-14 Atlanta (USA) * TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear fuel cycle

10-14 Atlanta (USA) * TC 85/SC 6 Nuclear energy, nuclear technolo-gies, and radiological protection/Reactor technology

10-14 Tel Aviv (Israel) * TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

11 Chantilly (USA) * TC 220 Cryogenic vessels

11-12 (Belgium) ** TC 17/SC 17 Steel/Steel wire rod and wire products

11-13 Gothenburg (Sweden)

* TC 22 Road vehicles

11-13 Berlin (Germany) * TC 156 Corrosion of metals and alloys


* REMCO Committee on refer-ence materials

12 Munich (Germany)

* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air purity specification and compressed air treatment equipment

12-13 Geneva (Switzerland)

* TMB Technical Manage-ment Board

13-14 Barcelona (Spain)

TC 91 Surface active agents

17-21 Seoul (Korea, Republic of)

JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems

17-21 Bellevue (USA) JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

17-21 Shanghai (China) TC 121 Anaesthetic and res-piratory equipment

17-21 Berlin (Germany) ** TC 149 Cycles

18-19 Louvain-la-Neuve (Belgium)

* TC 17/SC 11 Steel/Steel castings

18-19 (Spain) ** TC 137 Footwear sizing des-ignations and marking systems


** TC 22/SC 3 Road vehicles/Elec-trical and electronic equipment

24-26 Berlin (Germany) * TC 34/SC 9 Food products/Microbiology


* TC 35 Paints and varnishes

24-28 Gaborone (Botswana)

TC 207 Environmental management

25-26 Tokyo (Japan) TC 17/SC 9 Steel/Tinplate and blackplate

Geneva (Switzerland)

** CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

Prague (Czech Republic)

** TC 17/SC 12 Steel/Continuous mill flat rolled products

(France) ** TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection

Washington, D.C (USA)

** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements

Paris (France) ** TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps

Porto de Galin-has (Brazil)

** TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing

(Germany) ** TC 180 Solar energy

July 2013

15-19 Paris (France) * JTC 2 Joint Project Commit-tee - Energy efficiency and renewable energy sources - Common terminology

Notting-ham (United Kingdom)

** TC 261 Additive manufacturing

August 2013

21-23 (USA) ** TC 134 Fertilizers and soil conditioners

26-30 (Canada) ** JTC 1/SC 35 Information technol-ogy/User interfaces

September 2013

3-6 Hangzhou (China)

* TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes

8-9 Victoria (Canada) * TC 33 Refractories


* JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training


9 London (United Kingdom)

* TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems

9 Paris (France) ** TC 79/SC 11 Light metals and their alloys/Titanium

9-10 Paris (France) * TC 26 Copper and copper alloys

9-11 Paris (France) * TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

9-11 Gaithersburg (USA)

** TC 172/SC 9 Optics and photon-ics/Electro-optical systems

9-13 Delft (Netherlands)

* JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

9-13 Suzhou (China) * TC 61 Plastics


** TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock

9-14 Stockholm (Sweden)

* TC 163 Thermal performance and energy use in the built environment


* TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder

10-13 Vienna (Austria) ** TC 146/SC 6 Air quality/Indoor air


* TC 21/SC 11 Equipment for fire protection and fire fighting/Smoke and heat control systems and components


* TC 21/SC 2 Equipment for fire protection and fire fighting/Manu-ally transportable fire extinguishers

12 Paris (France) ** TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium


* TC 21 Equipment for fire protection and fire fighting

13 Paris (France) ** TC 79 Light metals and their alloys

15-20 Velsen (Netherlands)

TC 164 Mechanical testing of metals

16-17 St. Peters-burg (Russian Federation)

* DEVCO Committee on developing countries matters


* TMB Technical Manage-ment Board


* TC 150 Implants for surgery

16-20 Fukuoka (Japan) ** TC 190 Soil quality

16-20 Fukuoka (Japan) * TC 190/SC 2 Soil quality/Sampling

17 Paris (France) * TC 254 Safety of amusement rides and amusement devices

17-18 Belo Horizonte (Brazil)

** TC 155 Nickel and nickel alloys

17-19 Tokyo (Japan) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

17-19 Chengdu (China) * TC 256 Pigments, dyestuffs and extenders


* GA General Assembly

21 St. Peters-burg (Russian Federation)

* COUNCIL Council

23-26 (Canada) ** TC 153/SC 1 Valves/Design, manu-facture, marking and testing

23-27 Kobe (Japan) * JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)

25-26 Oslo (Norway) * TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries

25-26 Seogwipo-si (Korea, Repub-lic of)

** TC 159 Ergonomics

26-27 Toulouse (France)

* TC 264 Fireworks

27 Seoul (Korea, Republic of)

** TC 44/SC 12 Welding and allied processes/Soldering materials

27 (Canada) ** TC 153/SC 1 Valves/Design, manu-facture, marking and testing

St. Peters-burg (Russian Federation)

** CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

Paris (France) ** TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete

London (United Kingdom)

** TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water

London (United Kingdom)

** TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas

13 Paris (France) ** TC 79/SC 4 Light metals and their alloys/Unalloyed (refined) aluminium ingots

13 Paris (France) ** TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys

13 Paris (France) ** TC 79/SC 7 Light metals and their alloys/Aluminium and cast aluminium alloys

13 Paris (France) ** TC 79/SC 9 Light metals and their alloys/Symbolization


Stockholm (Sweden)

** TC 119 Powder metallurgy

Atlanta (USA) ** TC 142 Cleaning equipment for air and other gases

Fukuoka (Japan) ** TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification

Fukuoka (Japan) ** TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics

Fukuoka (Japan) ** TC 190/SC 4 Soil quality/Biological methods

Fukuoka (Japan) ** TC 190/SC 7 Soil quality/Soil and site assessment

Tokyo (Japan) ** TC 267 Facilities management

September-October 2013

30-4 (Sweden) ** JTC 1/SC 25 Information technolo-gy/Interconnection of information technol-ogy equipment

October 2013

1 Stuttgart (Germany)

* TC 165 Timber structures

3-4 Chantilly (USA) * TC 58/SC 2 Gas cylinders/Cylin-der fittings

7 Istanbul (Turkey) * TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

7-8 Milan (Italy) ** TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes

7-9 Tokyo (Japan) * TC 70 Internal combustion engines

7-9 Tokyo (Japan) ** TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement

7-9 Istanbul (Turkey) ** TC 126 Tobacco and tobacco products

7-11 Beijing (China) * CASCO Committee on con-formity assessment

7-11 Istanbul (Turkey) * TC 38 Textiles

7-11 Oslo (Norway) * TC 138 Plastics pipes, fittings and valves for the transport of fluids

8 Istanbul (Turkey) * TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests


* TC 8/SC 7 Ships and marine technology/Inland navigation vessels

9 Istanbul (Turkey) * TC 38/SC 23 Textiles/Fibres and yarns

10 Istanbul (Turkey) * TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics

11 Garching (Germany)

** TC 60 Gears


** TC 60/SC 1 Gears/Nomenclature and wormgearing


** TC 60/SC 2 Gears/Gear capacity calculation

14-15 Miami (USA) ** TC 44/SC 3 Welding and allied processes/Welding consumables

14-18 Paris (France) * TC 2 Fasteners

14-18 Seoul (Korea, Republic of)

* TC 108 Mechanical vibration, shock and condition monitoring

16-18 Munich (Germany)

* TC 58/SC 3 Gas cylinders/Cylin-der design

16-18 (Korea, Repub-lic of)

** TC 123 Plain bearings


** TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions


** TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details


** TC 123/SC 5 Plain bearings/Quality analysis and assurance


** TC 123/SC 6 Plain bearings/Terms and common items


** TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings

17-18 (South Africa) ** TC 44 Welding and allied processes

18 Berlin (Germany) * TC 22/SC 7 Road vehicles/Injec-tion equipment and filters for use on road vehicles

21-25 (Europe) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

21-25 Sao Paulo (Brazil)

* TC 181 Safety of toys


* TC 215 Health informatics

21-26 Berlin (Germany) * TC 147 Water quality

22-25 Tokyo (Japan) * TC 146/SC 1 Air quality/Stationary source emissions

23 Tokyo (Japan) ** TC 206 Fine ceramics

24-25 Sarajevo (Bosnia and Herzegovina)

** TC 34/SC 12 Food products/Sen-sory analysis

24-25 Berlin (Germany) TC 173 Assistive products for persons with disability

28-29 Düsseldorf (Germany)

* TC 17/SC 4 Steel/Heat treatable and alloy steels

(South Africa) ** TC 44/SC 9 Welding and allied processes/Health and safety

(France) ** TC 111 Round steel link chains, chain slings, components and accessories

(France) ** TC 111/SC 1 Round steel link chains, chain slings, components and ac-cessories/Chains and chain slings

Berlin (Germany) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

Supplement to ISO Focus+ · Supplement to ISO Focus+ February 2013 People and places ISO Members 2...

Documents

Transcript of Supplement to ISO Focus+ · Supplement to ISO Focus+ February 2013 People and places ISO Members 2...