Clean and quickrenovation of floorcoverings – withoutloss of use!

Ideal for:• Supermarkets• Shops• Offices• Hospitals• Retirement /

Nursing Homes• Hotels• Restaurants• Schools

Switchtec

Hospitals

Nursing / Retirement Homes

Schools

393 South Road, Mile End, South Australia 5031 Phone: (08) 8354 9000 Fax: (08) 8354 9045

Email: 393@spectrumfloors.com.au

quality innovationexperience service

quality innovationexperience service

The unique switchtecdry adhesive technologySwitchtec dry adhesives are pre-dried in thefactory and are self adhesive. The adhesive is pressuresensitive ensuring maximum strength is obtainedduring application.

In flooring technology Switchtec dryadhesives provide an alternative to the use of liquidadhesives and offer substantial additional benefits,such as the saving of time and costs.

After adaption to the different substrates, theadhesives are applied to both sides of a PE film withseveral different special coatings and are wound intorolls.

Switchtec dry adhesives are the result ofmany years of development and cooperation betweenthe SIFLOOR Laboratory, Production and ApplicationTechnology departments.

switchtecdry adhesives pay off• More than 20% of costs saved in comparison with

the tearing out of the existing floor covering

• Minimal loss of use / interruption to operation

• No dust, noise, dirt

• No odours

• Can be used immediately

• Less disposal costs

• No residual or processing toxins, such as solvent,high boiling point elements, formaldehyde,chlorine

• Reduces the impact on tenants

• The laid floor covering can be removed againwithout residue at a later date

ForNew PVC, CV, nora©

coverings, fitted carpetsOn tiled floors, anhydritecomp. floors,chipboard

ForNew PVC, CV, nora©

coverings, fitted carpetsOn existing PVC,CV coverings,linoleum

ForNew fitted carpetsOn Parquet, laminate,artificial stoneForNew PVC, CV, nora©

coveringsOn Artificial stone, terrazzo

removal without residue

Switchtec 1

Switchtec 2

Switchtec 3

Example Renovation 80m2: With Switchtec, you savetime and renovate up to 25% cheaper (not including loss of output costs)

Comparison hours with wet adhesive Switchtec

Tear out and disposal ~ 12h 0h (no need)Sanding away adhesive residue ~ 2h 0h (no need)Priming ~ 1h 0h (no need)Filling ~ 3h 0h (no need)

waiting time no waiting time

Sanding down ~ 1h 0h (no need)Gluing, opening time, laying ~ 7h 8h

waiting time no waiting time

Welding/sealing/joints (elastic floor coverings) ~ 2h ~ 2h

waiting time no waiting timeEarliest date for replacing furniture after 1-2 days directly

TOTAL Outlay in hours ~ 28h 10hJourneys 3-4 1Days down-time 5-6 0