SUPERACCESS PRODUCTS - MOBLE PTY LTD · 2018. 5. 30. · • 75x75x5mm steel angle welded frame •...
Transcript of SUPERACCESS PRODUCTS - MOBLE PTY LTD · 2018. 5. 30. · • 75x75x5mm steel angle welded frame •...
-
BOXESSTAIR BOXES
PANELSFLOORING/ROOFING/BEAMS/COLUMNS
MISCELLANEOUS COMPONENTSBASE COMPONENTSHOP-UP & PLANKS
WALL TIESSTAIRKIT
LIFTING LUGSSUPERBARRIER
23456789101112
SUPERACCESS PRODUCTS
INNOVATIVE | SAFETY | PRODUCTIVITYwww.prestonaustralia.com
-
2 www.prestonaustralia.com
BOXES
1.1m BOX - Half size Box compatible with all other Boxes.
BX11 BX222.2m BOX - Outside face with 50x50x4 wire mesh face with handrail and kickboard welded to Box for added strength and safety.
BX5B11.2m FULLY WELDED BOX with welded lifting lugs. Each box is 24m² and is ideal for scaffolding, screens, protective barrier, etc. Ready to lift and use.
HB5B11.2m FULLY WELDED HALF WIDTH BOX with welded lifting lugs. Each box is 24m² and is ideal for scaffolding, screens, protective barrier, etc. Ready to lift and use.
BXNMNO MESH BOX - Expanded metal looring for grip, drainage and easy maintenance.
FEATURES OF ALL BOXES - [FEATURES VARY BETWEEN MODELS]
• 75x75x5mm steel angle welded frame• 18mm Ø bolt holes at 80mm centers for ixing lexibility• 50 x 50 x 4 mm wire mesh welded to Box• Anti-slip deck (expanded metal)• Hot dip galvanised inish• 4 x welded lifting lugs (with SWL of 1000kg per lug)• Removable handrails and kickboard on all models• All Boxes can be lifted by forklift• All Boxes and components are compatible with each other
HB111.1m HALF WIDTH BOX - Extra landing, extensions, gap illing. Compatible with all SuperAccess boxes and components
HB22 2.2m HALF WIDTH BOX Used for extra landing, extentions and gap illing.
1120
1120
2160
2240
1120
2160
1120
560
2160
2240560
2160
11200
560
2160
Weight: 160 Kg
Weight: 286 Kg
Weight: 1300 Kg
Weight: 815 Kg
Weight: 250 Kg
Weight: 163 Kg
Weight: 104 Kg
2240
1120
2160
11200
1120
2160
-
SMALL STAIR BOX - Stair box used for quick access - level to level. The front deck is a working platform with removable hand rails and kickboard. All Boxes are ready to use.
Weight: 300 Kg
BIG STAIR BOX - Very comfortable 961mm wide stairs. Compatible component for combinations with BX11, BX22 and BXNM boxes to make any coniguration of stairs including but not limited to our SB56 and SB78 stretcher stair boxes.
Weight: 405 Kg
4.4m ZIG ZAG STAIR BOX - With 776mm wide stair treads, wire mesh on 4 faces for added strength and safety. 65x65x5 Angle cross brace at end faces of Box for additional strength.
Weight: 715 Kg
5.6m ZIG ZAG STAIR BOX - With 961 mm wide stair treads and 970 mm wide landing.
Weight: 1196 Kg
FULL STRETCHER STAIR BOX - With 961 mm wide stair treads and 2090 mm wide landing. Used on site as stretcher stair access.
Weight: 1596 Kg
SMALL ZIG ZAG STAIR BOX - Wire mesh welded on 3 faces for added strength and safety. Compatible com-ponent for combinations with HB11, HB22, BX11, BX22 and BXNM boxes and all other SuperAccess compo-nents to assemble any stair access coniguration.Weight: 230 Kg
SBSS
SBBS
SB44
SB56
SB78SBZZ
FEATURES OF ALL STAIR BOXES - [FEATURES VARY BETWEEN MODELS]
• 75x75x5mm steel angle welded frame• 18mm Ø bolt holes at 80mm centers for ixing lexibility• 50 x 50 x 4 mm wire mesh welded to Box• anti-slip deck and stair treads(expanded metal)
• • hot dip galvanised inish• 4 x welded lifting lugs (with SWL of 1000kg per lug)• removable handrails and kickboard on all models• all Boxes can be lifted by forklift• all Boxes and components are compatible with each other
STAIR BOXES
1120
2240
2160
50° 495
1120 3360
37° 961
2160
1120
2240
2160
49550°
4480
2160
75037°
5600
2240
961
970
2160
37°
78402240
2160
2090
961
37°
-
4 www.prestonaustralia.com
PANELS
STRUCTURAL PANEL 75 x 75 x 5 mm Equal Angle welded frame with 65 x 65 x 5 mm Equal Angle cross brace welded for increasing strength and rigidity to any Boxes or SuperAccess structure. Ideal for support towers, stair towers, bridges, trusses, fences, screens or for any structure including but not limited to strengthening any SuperAccess structures.
LIGHT PANEL 50 x 50 x 4mm steel wire mesh welded to 2 mm plate for closing openings not required for access. 18mm diameter bolt holes at 80mm centers for ixing lexibility
PX11Weight: 72 Kg
PN20Weight: 20 Kg
PX22Weight: 100 Kg
PN10Weight: 10 Kg
2240
2160
751120
75
2160
FEATURES - [FEATURES VARY BETWEEN MODELS]
• 75 x 75 x 5 mm steel angle welded frame• 18mm Ø bolt holes at 80mm centers for ixing lexibility• 50 x 50 x 4 mm wire mesh• Hot dip galvanised inish• Compatible with ALL SuperAccess products
1088
2000
10
10 1088
960
PN20
PN10
BX11
SBBS
BX11SBSS
PX11
BX11
PX11
BXNM PX11
PX22
PX22
-
X
75
320
320
150
Various size checker plate surface 3mm, 6mm and 8mm thick welded to 75 x 75 x 5 Equal Angle frame. Used for looring on ramps, bridges and where heavy duty loading is being used including; machinery moving, cars and trucks. Compatible with all SuperAccess components. Can be combined with PX11 and PX22 for side edge protection and added rigidity.
75 x 75 x 5 Equal Angle welded frame and plate 18 mm diameter bolt holes at 80 mm centers for ixing lexibility. Can be used as support beams under looring decks and Boxes for added strength. Extremely versatile with many other applications including long length or double beams can be assembled to suit most structural applications including; propping, bracing and columns. Compatible with all other Beams, Boxes, Stair Boxes and accessories.
SUPERACCESS FLOORING/ROOFING DECKS
SUPERACCESS BEAMS
SINGLE BEAM
Training Tower constructed with SuperAccess beams, decks and boxes.
Loading platform constructed with SuperAccess beams and decks.
Loading platform/bridge/ramp constructed with SuperAccess beams, decks and panels.
DOUBLE BEAM
FLOORING/ROOFING/BEAMS
CODE CP L X H WEIGHT
DK31 3mm 1120 1120 78 56 Kg
DK32 3mm 2240 1120 78 100 Kg
DK65 6mm 1120 560 81 53 Kg
DK61 6mm 1120 1120 81 85 Kg
DK62 6mm 2240 1120 81 159 Kg
DK81 8mm 1120 1120 83 120 Kg
DK82 8mm 2240 1120 83 227 Kg
DK83 8mm 3360 1120 83 347 Kg
L
X
H
CHEQUER PLATE "CP"
CODE X WEIGHT
BM05 560 13 Kg
BM11 1120 21 Kg
BM16 1680 30 Kg
BM22 2240 40 Kg
BM33 3360 56 Kg
320
75
-
6 www.prestonaustralia.com
MISCELLANEOUS COMPONENTS
Used as guard and mid rails for working platform. Compatible with SuperAccess Boxes.
Used as kickboard or toeboard for working platform. Compatible with SuperAccess Boxes.
Used as a spreader bar. Compatible with SuperAccess Beam and Boxes.
EDGE PROTECTION RAILS
KICKBOARDS
SPREADER BARS
75 x 75 x 5 EA 3360 long with 18 mm diameter bolt holes at 80 mm centers for ixing lexibility. Major component of most SuperAccess products and com-patible with all SuperAccess products. Typically used for bracing, joining and adding strength.
150 x 75 x 10 x 7 TEE Section 3360 long with 18 mm diameter bolt holes at 80 mm centers for ixing lexibility. Typically used for support, bracing, joining and adding strength.
75 x 3 PLATE 640 long with 18 mm diameter bolt holes at 80 mm centers for ixing lexibility. Generally used as an inill plate between Boxes or compo-nents to achieve correct spacing.
320 x 320 x 6 TRIANGLE PLATE with 18 mm diameter bolt holes at 80 mm centers for ixing lexibility. Typically used for support, bracing, joining and adding strength.
300 x 300 x 6 PLATE with 18 mm diameter bolt holes at 80 mm centers for ixing lex-ibility. Generally used as an inill plate between Boxes and plate to join SuperAccess components.
480 x 480 x 6 TRIANGLE PLATE with 18 mm diameter bolt holes at 80 mm centers for ixing lexibility. Typically used for support, bracing, joining and adding strength.
AN33 TEE3
INFL
TRI4
PLT4
TRI6
CODE X WEIGHT
HR05 560 2.3 Kg
HR11 1120 3.7 Kg
HR22 2240 7.3 Kg
CODE X WEIGHT
KB05 560 3.5 Kg
KB11 1120 7 Kg
KB22 2240 13.4 Kg
CODE X WEIGHT
SPD5 408 3.8 Kg
SPD1 968 7.3 Kg
SPD2 2088 14 Kg
X
40
60
181
X
60
X
75
155
Weight: 20.5 KgWeight: 55.5 Kg
Weight: 1.2 Kg
Weight: 3 Kg
Weight: 4 Kg
Weight: 7.5 Kg
3360
75
75
75
3360
150
300
300
6 mm
320
320
6 mm
480
480
6 mm
75
75
150
10
7
75
640
3
75
-
BASE COMPONENTS
BASE - For use with 2 x BAJK for level-ling purposes. 8 mm plate with 6 x 18 mm diameter ixing holes at 80 mm centers. welded to 48 mm diameter pipe Compat-ible with all SuperAccess Structures
Levelling Jack - 150 x 150 x 10 mm base-plate welded to threaded bar with wing nut to adjust levels of SuperAccess Structures used in conjunction with BA1J/BA2J/BALN. Weight: 8.7 Kg
Levelling Jack - Swivel 150 x 150 x 10 mm baseplate that incorporates a hinge genrally used on ramps where ground surface is sloping. Combined with BA1J/BA2J/BALN to connect to all SuperAccess forms or structures.
Weight: 8.7 Kg
BASE - For use with BAJK for levelling purposes. 48 diameter pipe welded to 10 mm plate with 18 mm diameter ixing holes at 80 mm center. Compatible with all SuperAccess Structures.
Lock Nut - Used on top of BAJK to lock or stop BAJK from falling out of BA1J or BA2J when lifted by crane.
Weight: 0.38 Kg
BA2J
BAJK
BASJ
BA1J
BALN
Weight: 2.5 Kg
Weight: 10 Kg
BASJ
BALN
BA1J
150
15010
10
BAJK x 2
BALN x 2
BA2J
150
150
10
-
8 www.prestonaustralia.com
HOP -UP BRACKETS & PLANKS
Brackets for use with 1,2 & 3 hop-up planks
CODE LENGTH WIDTH HEIGHT WEIGHT
HUH1 260 75 195 4 Kg
HUH2 490 75 195 6.5 Kg
HUH3 720 75 195 8.2 Kg
Brackets for use with 1,2 & 3 hop-up planks
CODE LENGTH WIDTH HEIGHT WEIGHT
HU1B 260 150 195 5 Kg
HU2B 490 150 195 7.8 Kg
HU3B 720 150 195 10.1 Kg
Hop-up planks. For use with hop-up brackets.
CODE X WEIGHT
PLK1 1100 8.6 Kg
PLK2 2215 16.8 Kg
HALF HOP-UP BRACKETS
HOP-UP BRACKETS
PLANKS
HUH1
HU1B
HUH2
HU2B
HUH3
HU3B
HU3B, PLK2 & HUH3 assembly shown
X230
65
HU1B, PLK2 & HUH1 assembly shown
HU2B, PLK2 & HUH2 assembly shown
-
WALL TIES
Ties generally used to anchor SuperAccess Structures to existing structures.
FEATURES
• 18mm Ø bolt holes at 80mm centers for ixing lexibility• 48.3 DIA x 4 mm pipe• 140 x 140 x 6 mm base plate• Hot dip galvanised inish
TIES
all models shown
CODE LENGTH WEIGHT
TB05 506 3.4 Kg
TB10 1006 6.1 Kg
TB15 1506 8.2 Kg
TB20 2006 10.6 Kg
-
10 www.prestonaustralia.com
STAIR KIT
STAIR TREAD 1110mm long - Expanded metal tread. For use on construction sites
STAIR TREAD 480mm wide - Chequer plate stair tread with front kickboard used in public areas
STAIR TREAD 480mm wide - Chequer plate stair tread with front kickboard used in public areas
MULTI-PURPOSE STAIR BLOCK - Used for joining stair treads, exten-sions and gap illing. Compatible with all SuperAccess components.
ASSEMBLY EXAMPLEStair Kit Assembly can also be used as landing deck, bridges, step over and many other applications and design.
STAIR HAND RAIL
SKEX
SK48
SKCP
BLOK
SKHR
FEATURES - [FEATURES VARY BETWEEN MODELS]
• 18mm Ø bolt holes at 80mm centers for ixing lexibility• anti-slip deck expanded metal/chequer plate• hot dip galvanised inish• compatible with all SuperAccess Boxes/Stair Boxes
MODEL TREAD LENGTH GOING RISER WEIGHT
SKEX 960 1110 240 160 17 Kg
SKCP 960 1110 480 160 34 Kg
SK48 2080 2230 480 160 55 Kg
BLOK NA 75 240 160 3.8 Kg
SKHR NA 240 50 1157 4.6 Kg
EXPANDED METAL
OR
CHEQUER PLATE
STAIR BLOK
LANDING
DECK
HANDRAIL
SKHR
SK48
GOING CAN BE CAN BE FIXED
TO FOLLOWING DIMENSIONS
240/320/400/480mm
STAIR TREAD
SKEX
-
LIFTING LUGS
LIFTING LUG - 3 Tonne Safe Work Load
Weight: 2 Kg
LIFTING LUG - 6 Tonne Safe Work Load
Weight: 7 Kg
LIFTING LUG - 10 Tonne Safe Work Load
Weight: 38 Kg
LG3T
TYPICAL LIFTING LUG ON BOXWELDED LIFTING LUG - 1 Tonne Safe Working Load
LG10
LG6T
8
150
150
12
230160
16
16
1120
75
16
16
12
12
BXNM shown
1 TONNE SWL EACH
EXPANDED METAL DECKING
EIGHT (8) SAFETY
HARNESS AND/OR LANYARD ANCHOR HOLE ON
EACH BOX.
-
12 www.prestonaustralia.com
SUPERBARRIER - EDGE PROTECTION
Description: 800 mm SuperBarrier Panel with 50 x 50 x 4 mm mesh and kickboardSize: 800 mm LONG x 1100 HIGH
NOTE: All SuperBarrier are hot dip galvanised.For more information request SuperBarrier Brochure.
Description: 2100 mm SuperBarrier Panel with 50 x 50 x 4 mm mesh and kickboardSize: 2100 mm LONG x 1100 HIGH
Description: Rubber Metal Base - RMB has 14 positions to insert B08 or B21. All RMB have 8 rubber (foot pads) for better gripWeight: 18 Kg
Description: Bolt Down Base Plate - BBP can be bolted to concrete, timber, ply or any other material using 12 mm anchor boltWeight: 2.3 Kg
SuperBarrier components shown in typical assembly
Selected positions for Barrier B08 or B21 in any one of the 14 positions in RMB.
Description: Clip Bracket with bolt positionWeight: 1.5 Kg
B08 B21
RMB BBP
CLP
BBP
RMB
B08
B21
CLP