Super-Fast Primer UZIN PE 280 · UZIN PE 280 is a film-forming dispersion super-fast primer ... As...

of 2 /2
Dispersion primer with carbon technology for smooth and dense surfaces UZIN PE 280 Description: UZIN PE 280 is a film-forming dispersion super-fast primer for main use on dense substrates. Its special carbon-fibre technology produces a rough and well-keyed surface which is ready for levelling work very fast. For interior use. As a bonding primer: 3 on existing surfaces requiring refurbishment, on well- bonded, waterproof residues of adhesives or levelling compounds (e.g. synthetic resin, neoprene, bitumen or dispersion adhesives) 3 on dense substrates or substrates with low absorbency (e.g. stone floors and ceramics, water-resistant coatings, epoxy coverings) 3 on existing or ungritted mastic asphalt 3 on magnesia- and stonewood screeds 3 on epoxy primers (e. g. UZIN PE 460 /480) or on PUR- primers (e.g. UZIN PE 414 Turbo) 3 prior to levelling work with UZIN cement- and calcium sulphate-levelling compounds 3 on warm water underfloor heating system 3 for exposure to castor wheels in accordance with DIN EN 12 529 3 for heavy wear in domestic, commercial and industrial locations Product Benefits / Properties: UZIN PE 280 impresses by its exceptional speed and ideal adhesion to the substrate. Com position: Modified styrol-acrylate copolymers, wetting- and defoaming-agents, preservatives, carbon fibres, synthetic and mineral aggregates, water. 3 Ready to use 3 Film-forming 3 Ideal bonding agent on dense surfaces 3 Also suitable for wall applications 3 High-speed construction product 3 Solvent-free 3 EMICODE EC 1 PLUS/ Very low emissions Technical Data: Packaging: oblong plastic bucket Packsizes: 5 kg, 12 kg Shelf life: min. 12 months Colour wet / dry: ochre Consumption: 70 – 150 g / m 2 Working temperature: min. 10 °C at floor level Drying time: 45 mins. to 4 hrs.* * At 20 °C/68 °F and 65 % relative humidity. See also “Application Chart”. PRODUCT DATA SHEET Super-Fast Primer UZIN | A brand of Uzin Utz Group DE | Uzin Utz AG | Dieselstraße 3 | 89079 Ulm | Telefon +49 731 4097-0 | Telefax +49 731 4097-110 | E-Mail [email protected] | Internet www.uzin.de GB| Uzin Utz UK Ltd. | Unit 2, Mitchell Court | Central Park, Rugby, Warwickshire | CV23 0UY | Phone +44 1788 530 080 | Fax +44 1788 536 508 E-mail [email protected] | Internet www.uzin.co.uk

Embed Size (px)

Transcript of Super-Fast Primer UZIN PE 280 · UZIN PE 280 is a film-forming dispersion super-fast primer ... As...

  • Dispersion primer with carbon technology for smooth and dense surfaces

    UZIN PE 280

    Description:

    UZIN PE 280 is a film-forming dispersion super-fast primerfor main use on dense substrates. Its special carbon-fibretechnology produces a rough and well-keyed surface whichis ready for levelling work very fast. For interior use.

    As a bonding primer:

    3 on existing surfaces requiring refurbishment, on well-bonded, waterproof residues of adhesives or levellingcompounds (e.g. synthetic resin, neoprene, bitumen ordispersion adhesives)

    3 on dense substrates or substrates with low absorbency(e.g. stone floors and ceramics, water-resistant coatings,epoxy coverings)

    3 on existing or ungritted mastic asphalt3 on magnesia- and stonewood screeds3 on epoxy primers (e.g. UZIN PE 460/480) or on PUR-

    primers (e.g. UZIN PE 414 Turbo)

    3 prior to levelling work with UZIN cement- and calciumsulphate-levelling compounds

    3 on warm water underfloor heating system3 for exposure to castor wheels in accordance with DIN

    EN 12 529

    3 for heavy wear in domestic, commercial and industriallocations

    Product Benefits /Properties:

    UZIN PE 280 impresses by its exceptional speed and idealadhesion to the substrate.

    Composition: Modified styrol-acrylate copolymers, wetting-and defoaming-agents, preservatives, carbon fibres, syntheticand mineral aggregates, water.

    3 Ready to use3 Film-forming3 Ideal bonding agent on dense surfaces3 Also suitable for wall applications3 High-speed construction product3 Solvent-free3 EMICODE EC 1 PLUS/Very low emissions

    Technical Data:Packaging: oblong plastic bucket

    Packsizes: 5 kg, 12 kg

    Shelf life: min. 12 months

    Colour wet /dry: ochre

    Consumption: 70 150 g /m2

    Working temperature: min. 10 C at floor level

    Drying time: 45 mins. to 4 hrs.*

    * At 20 C/68 F and 65 % relative humidity. See also Application Chart.

    PRODUCT DATA SHEET

    Super-Fast Primer

    UZIN | A brand of Uzin Utz Group

    DE | Uzin Utz AG | Dieselstrae 3 | 89079 Ulm | Telefon +49 731 4097-0 | Telefax +49 731 4097-110 | E-Mail [email protected] | Internet www.uzin.deGB| Uzin Utz UK Ltd. | Unit 2, Mitchell Court | Central Park, Rugby, Warwickshire | CV23 0UY | Phone +44 1788 530 080 | Fax +44 1788 536 508

    E-mail [email protected] | Internet www.uzin.co.uk

  • Substrate Preparation:

    The substrate must be sound, load bearing, dry, free fromcracks, clean and free from materials which would impairadhesion (e.g. dirt, oil, grease). The substrate must be testedin accordance with applicable standards and bulletins andany deficiencies must be reported.

    Any weakly bonded or soft surface sections (e.g. separatingagents, loose residues of adhesives, levelling compounds,coverings or paints) have to be removed by brushing,abrading, grinding or shot-blasting. Used, smooth andnon-absorbent substrates must be cleaned intensely withRZ Grundreiniger, after drying they have to be grind matt.Thoroughly vacuum to remove loose material and dust.Always allow the primers to dry completely.

    Refer to the Product Data Sheets for other products used.

    Application:

    1. Before use, allow containers to come to room tempera-ture and stir well.

    2. Apply a full and even coat of primer onto the surfaceusing the UZIN Nylon roller (Art.no.: 9394) or a short-pile lambswool roller. Avoid pooling.

    3. Clean tools with water immediately after use.

    Application Chart:

    Allow to dry to an ochre-coloured film that will acceptfoot traffic.

    *At 20 C/68 F and 65 % relative humidity.

    Substrate Consumption Drying Time

    Well-bonded, waterproofapprox.

    residues of adhesives 100 150 g /m245 min*

    and levelling compounds

    Dense and smoothsubstrates, e.g. ceramicand natural stone tiles,reworked stone, terrazzo, approx.water-resistant coatings, 70 100 g /m2 45 min*epoxy coatings, metalsurfaces, other densesubstrates

    UZIN PE 460 or approx.UZIN PE 414 Turbo

    70 100 g /m245 min*

    Mastic asphalt that is old approx.or un-gritted

    100 120 g /m245 min*

    Magnesia- and approx.stone-wood screeds

    100 120 g /m24 hours*

    Important Notes:

    3 Shelf life minimum 12 months in original packaging whenstored in relatively cool conditions. Carefully and tightlyreseal opened containers and use the contents as quickly aspossible. Allow containers to come to room temperaturebefore use.

    3 Optimum work conditions are 15 25 C, floor temperatureabove 15 C/59 F and relative air humidity below 65%. Lowtemperatures and high air humidity lengthen, whilst hightemperatures and low air humidity shorten the drying time.

    3 When applying levelling compounds in several coats, alloweach to dry completely, prime with UZIN PE 360 PLUS and,after a sufficient drying time, apply the next coat.

    3 If applying a levelling coat of more than 10 mm thickness,epoxy resin primers such as gritted UZIN PE 460 or PE 480have to be used.

    3 Not suitable as a primer under wood flooring adhesive3 Not suitable for use on water-soluble adhesive residues (e.g.

    spent sulphite adhesives) or fixatives. Please look for suitableproducts in the UZIN product overview.

    3 The following standards, regulations and publications areapplicable and especially recommended: DIN 18 365 Working with floor coverings DIN 18 356 Working with wood flooring TKB publication Assessment and preparation of substratesfor floor covering and wood flooring work

    BEB publication Assessment and preparation of subfloors

    Protection of the Workplace and the Environment:Solvent-free. Non-flammable. Requires no special protection or precautions in gen-e ral use. Use of barrier cream and ventilation of the work area are recommended. EMICODE EC 1 PLUS very low emission. Within the scope of current knowledge,gives off no emissions of formaldehyde, hazardous materials or volatile organic com-pounds (VOC). When fully dried, has a neutral odour and presents no physiologicalor ecological risk. Basic prerequisites for best possible indoor air quality followingfloor covering work are conformity to standards of the working conditions, as well asthoroughly dry substrate, primer and smoothing compound.

    Disposal:Where possible, collect product residues and re-use. Do not allow dispersal intodrains, sewers or ground. Empty, scraped and drip-free plastic containers are recycla-ble. Containers with liquid residue, as well as the liquid product, are classed as Spe-cial Waste. Dried product residues are classed as Construction Waste.

    UZIN PE 280

    The above information is based on our experience and careful investigations. The variety of associated materials and different construction and working conditions cannot be indi-vidually checked or influenced by us. The quality of your work depends, therefore, on your own professional judgement and product usage. If in doubt, conduct a small test or obtaintechnical advice. Observe the installation recommendations of the covering manufacturer. The publication of this Product Data Sheet invalidates all previous Product Information.The respective updated version of this datasheet can be found on our Homepage under www.uzin.com. 12.17 | LD