Sunstar Engineering Americas
-
Upload
brian-sapaugh -
Category
Documents
-
view
214 -
download
2
Transcript of Sunstar Engineering Americas
Specializing in the Custom
Design and Manufacturing of
Superior Adhesive, Sealant, & Coating Products
Corporate Overview
Sunstar, Inc. • Founded in 1932
• Locations in Japan, Asia, Americas & Europe
• Primary Industries: Oral Care, Health & Beauty, Construction Products, Automotive Adhesives, Sealants & Coatings, Motorcycle Parts
Sunstar Engineering Americas (SEA) • Founded in 1986
• Wholly Owned Subsidiary of Sunstar, Inc.
• Headquartered in Springboro, Ohio
• Primary Industries: Automotive Adhesives, Sealants & Coatings
Sunstar Engineering
Sunstar Engineering
Americas
Sunstar Engineering
Italy
Sunstar
Engineering
Japan
Sunstar
Engineering
Indonesia
Sunstar
Engineering
Singapore
Sunstar
Engineering
Thailand
Global Customer Base
SEA Product Lines
Press
mold
Weld Shop
Pre
treatment E-coat
Paint Shop
E-coat oven Apply sealant Apply Paint
Paint oven
Shower
Weld Apply adhesives
Assembly Shop
Assembly Apply adhesive
For Weld shop
• Structural adhesive
• Hemming Adhesive (HM)
• Mastic adhesive (MS)
• Spot sealant
• Weld shop sealant
• Pumpable Sheet metal
Stiffener(PSS)
• Pumpable Sound
Deadener(PSD)
• Body seam sealant (BS)
• Under body coating (UC)
• Structural Foam(CF)
• Direct glazing adhesive
(DG)
• Primer
• Door hole sealer (HDS)
For Parts Line
• Interior adhesive
• Formed In-Place Gasket (FIPG)
• E-material (Underfill)
+
- +
+ - +
Assembly Shop Paint Shop Weld Shop
Hem Flange Adhesive
One component modified epoxy base
Excellent anti-corrosion property and
adhesion to oily surface.
Structural Adhesive
One component modified epoxy base
Excellent adhesion to oily surface as
well as anti-fatigue property
Mastic Adhesive &
Weld through Sealant One component PVC-Free, foaming
and non-foaming varieties.
Excellent workability and adhesion
to many substrates.
Page7
Body Sealer One component PVC based and
Thermo plastic resin based.
Applied on the seams of the
interior and exterior of the vehicle
body. Excellent paintability and
crack resistance characteristics.
Under Body Coat One component PVC-Free, and
PVC-based coatings. Low density
and 3-wet versions available.
Applied to the underside and
wheelhouse of the vehicle. UBC
provides sound insulation,
excellent chip resistance and anti-
corrosion properties.
SOLVENT-BASED ADHESIVES Manufacture a variety of products in both one
component and two component formulations. The
solvent-based adhesives meet automotive
specifications for high heat and humidity. Solvent-
Based provide a large workability window, high initial
tack and our adhesives do NOT require a pre-
treatment for PP.
WATER-BASED ADHESIVES Manufacture a one component and two component Water Borne Adhesives
designed to bond most substrate combinations. Water Borne Adhesives eliminate
many of the hazardous chemicals found in Solvent Borne Adhesives, allowing for
more environmentally friendly manufacturing. Water Borne Adhesives are non-
flammable, allow for easy clean up and our adhesives do NOT require a pre-
treatment for PP.
Penguin Foam
A unique wet apply foam in place gasket material.
Penguin Foam is a single-component, fast curing flexible
polyurethane Foam-in-Place Gasket system (FIPG)
designed to increase productivity, reduce takt time and
the labor costs associated with cut gaskets.
With applications ranging from automotive, appliance
and packaging to electronic and industrial components,
Penguin Foam is the fastest and simplest way to seal
your production parts.
Penguin Foam has been successfully used around the world since 1998. As
Sunstar Engineering has production, sales and technical support throughout
Asia, Europe and the Americas, the Penguin Foam is ideal for your global
programs.
Page10
ECU/RelayーBOX
Air filter unit
Cockpit
module
Dashboard
unit
Fuse box
Rear gate
cover
Maintenance lid
cover Door module
Head lamp valve
cover
Outer pillar cover Air duct
Door speaker
Weatherstrip
Door latch
Rear combination lamp
Future Product Lines
Sunstar Engineering Americas is
currently developing several new
technologies to expand our market
share in the automotive industry.
• UV Cure Materials
• Crash Durable Adhesives
• Next Generation Water-Based Adhesives
• E-Materials
Global Contact
Information
NORTH AMERICA
Sunstar Engineering Americas Headquarters and Plant
85 S. Pioneer Blvd.
Springboro, OH 45066
Telephone: 937-746-8575
Sunstar Engineering Americas R&D Center
450 Victory Lane
Springboro, OH 45066
Telephone: 937-746-8575
Sunstar Engineering Americas Plant
700 Watkins Glenn
Franklin, OH 45005
Telephone: 937-743-9069
EUROPE
Sunstar S.p.A. Germany Branch
Ahornweg 6,
D-97990 Weikersheim, Germany
Telephone: +49-7934-993911
ASIA
Maple Marketing (GFTZ) Ltd.
4D, 1 Yanhe Road,
Donghui Square, West Area
Guangzhou Development Zone, 510730
China
Telephone: +86-20-2839-7891
PT. Sunstar Engineering Indonesia
MM-2100, Industrial Town Block I-2/1
Cibitung, Bekasi
West-Java, 17520 Indonesia
Telephone: +62-21-898-0892
Sunstar Engineering Pte. Ltd.
10 Science Park Rd. #04-27/28
The Alpha Singapore Science Park II
117684 Singapore
Telephone: +65-67741551
Sunstar Engineering (Thailand) Co.,
Ltd.
632 Moo 4, Bangpoo Industrial Estate
Soi 6, Sukhumvit Rd.
Samutprakarn 10280 Thailand
Telephone: +66-2-324-0652-4
JAPAN
Sunstar Inc./Sunstar Engineering Inc.
Hamuro R&D Center
5-30-1 Kamihamurp, Takatsuki,
Osaka 569-1044, Japan
Telephone: +81-72-6947771
Sunstar Engineering Inc.
Shiga Plant
1000-16 Aza-Otani Okamoto-cho,
Kusatsu, Shiga 525-0044, Japan
Telephone: +81-77-562-6771
Sunstar Engineering Inc.
Yamanashi Plant
181-1 Miyazawa, Minami-Alps,
Yamanashi 400-0415, Japan
Telephone: +81-552-84-3801
Questions or Comments?