�

Sunnytek Solar Sweden Home water city systems Page � /� 24 Jan 20171 3

Sunnytek clean water systems and designed to make water for a number of homes from a local water supply like a river or a drilled well. We offer 2 versions of the solution. All solutions are solar powered and need no grid.

* Surface water system WP 700Here we have an integrated pump. Max depth is 3 meter.Here pump is include inside cabinet and we have solar panels and electronics + a battery system to get a 24 hour operation. If water is very dirty water we add a special profiler for largest particles.Standard system is operated 5-7 hours per day and then it gives 3-4 M3 / day. This cowers typical 10 families each with 5 personsExtended system includes larger solar panels and larger battery system. Here we can extend to 24 hours operation with full flow. Here we get up to 14 M3 / day. This can then handle about 40 families with 5 persons each.In all cases we recommend to have a tank / tower to get better operation and less stress on users. Tanks of about 200 liters / family is normally OK.

Extended system is normally 1 KW in solar panels and a larger battery unit of 6-10 KWH content by the new Ni-MH battery system.

Sunnytek Sweden Glimmervägen 8 187 34 Täby, Sweden E-Mail sales@sunnytek.seSunnytek Burundi Avenue Ndora 3 No 27 Bujumbura, Burundi E-Mail barnabe@sunnytek.nuWeb sites www.sunnytek.se www.sunnytek.nu All Registered companies

Product specification WP360 School Oct 2015, rev. 2

Technical Specification Water cleaning capacity (at 16 mJ/cm2*) 42 liters per minute, 2,520 liters per hour

Water cleaning capacity (at 30 mJ/cm2*) 23 liters per minute, 1,380 liters per hour

Water cleaning capacity (at 40 mJ/cm2*) 17 liters per minute, 1,020 liters per hour

Operating pressure 0.3-8 Bar

Ambient temperature 0-50 °C

Recommended max. water temperature 40 °C

Connection size 3/4" BNP (male)

Solar power 12 V / 140 W

Battery capacity 12 V / 90 Ah

Max. power consumption 26 W

Security and safety Auto shut-off in case of lamp malfunction

Dimensions: water purification unit solar panel battery

563 x 536 x 130 mm, 9.5 kg 1,480 x 673 x 35 mm, 15 kg 350 x 167 x 183 mm, 27 kg

Filter 1 10" 50 micron washable

Filter 2 10" 5 micron sediment

Filter 3 10" 5 micron carbon taste/odour/rust/chlorine

* Depending on actual operating conditions such as water pressure, flow, temperature, type of filters, etc. Maintenance

UV lamp (S463RL) Replace once a year

Quartz sleeve (QS-463) Clean or replace as needed

Filter 1 (washable) Clean or replace as needed

Filter 2 (AWP110) Replace as needed

Filter 3 (AWP117) Replace as needed

Product specification IHS12-D4 Oct 2015, rev. 4

Technical specification Water cleaning capacity (at 16 mJ/cm2*) 83 liters per minute, 5,000 liters per hour

Water cleaning capacity (at 30 mJ/cm2*) 45 liters per minute, 2,700 liters per hour

Water cleaning capacity (at 40 mJ/cm2*) 34 liters per minute, 2,040 liters per hour

Operating pressure 0.3-8 Bar

Ambient temperature 0-50 °C

Recommended max. water temperature 40 °C

Connection size ¾" FNPT/MNPT

Electrical connections 100-240 V AC / 50-60 Hz

Max. power consumption 50 W

Dimensions 640 x 700 x 300 mm

Filter 1 10" 5 micron sediment/dirt/rust

Filter 2 20" 10 micron carbon taste/odour/chlorine

Shipping weight 15.9 kg

* Actual flow depends on operating conditions e.g. pressure, temperature, type of filters, condition of filters, etc. Maintenance

UV lamp (602805) Replace once a year

Quartz sleeve (602732) Clean or replace as needed

Filter 1 (CMB-510-HF) Replace as needed

Filter 2 (C2-02) Replace as needed

Safe water and pure power – anytime, anywhereSolar powered high-capacity water purification systems basedon UV radiation and reversed osmosis desalination technologies.

Effectively eliminates bacteria, virus, and protozoa inlinewith WHO recommendations.

Significantly reduces sediment, salt, arsenic, flouride, chlorine, nitrates, iron, and heavy metals.

Serving up to 10,000 people.

Rugged and robust design. Developed for field use.

Our solutions are uniquely designed for schools, health clinics, and village water points in remote rural areas.

Jolly Mercy Primary School, Nangabo, Uganda

WP700 solar powered water purification system installed directly to a rain water harvesting tank. Serves 400 students. Project sponsored by Midroc.

Product specification WP700-II Water Purification System Oct 2015, rev. 6

Technical Specification

Solar panel array capacity 500 W

Battery capacity 12 V / 180 Ah (AGM deep cycle)

Electrical output 12 V / 10 A, 5 V / 2 A (USB)

Water cleaning capacity Nominal 600 liters per hour *

Power consumption Nominal 75 W (peak 100 W)

Dimensions: water purification unit solar panel battery

630 x 650 x 180 mm 1,650 x 992 x 40 mm (2 pcs) 350 x 167 x 183 mm (2 pcs)

Weight: water purification unit solar panel battery

26 kg 20 kg (x2) 27 kg (x2)

Max. vertical distance between water surface level and the location of the unit 3 m

Max. inlet water pressure 1 bar

Recommended max. water input temperature 40 °C

Security and safety Auto shut-off in case of malfunction

* Depending on actual operating condition such as type of filters, condition of filters, lift head etc. Maintenance

UV lamp Replace every 9,000 hours or at least once a year

Quartz sleeve Clean with standard household citric acid, bi-annually

Filters Replace or clean as needed

Batteries Maintenance free, replace as needed

Solar Panels Dust as needed

Potable water tanks (optional) Thorough cleaning using Sodium hypochlorite solution, monthly

Safe water – anytime, anywhere

mailto:sales@sunnytek.semailto:barnabe@sunnytek.nuhttp://www.sunnytek.sehttp://www.sunnytek.nu

�

Sunnytek Solar Sweden Home water city systems Page � /� 24 Jan 20172 3

WP1200 system

Surface water WP 1200 system is a large version that. It is about double size in all parameters and gives 1200 liters / hour in clean water.

Standard system is operated 5-7 hours per day and gives about 6- 8 M3 of water. This is typical what 15-20 families need in clean water.

Extended system includes larger solar panels and battery and when operated 24 hours it can give up to 28-30 M3 / dayThis is typical what 70-75 families need per day.

If input water is very dirty we have a special particle filter to add. We also recommend to use a water tower like in all other systems. If volume is high it is preferable to have a multiple installation of WP 1200 systems

Application surface water system.These systems are designed to use surface water only as depth is max 3 meter. On demand we can add booster pumps to get up to 8 meters depth. If over 8 meter we have submersible water pumps operating on solar panels and battery systems.

Sunnytek Sweden Glimmervägen 8 187 34 Täby, Sweden E-Mail sales@sunnytek.seSunnytek Burundi Avenue Ndora 3 No 27 Bujumbura, Burundi E-Mail barnabe@sunnytek.nuWeb sites www.sunnytek.se www.sunnytek.nu All Registered companies

For safe and easy transport, the WP1200M comes with an integrated rugged light-weight aluminum trolley with handle carrying grips and two heavy duty air pumped wheels suitable for rough roads and staircases. The solar panel array is easily dismantled, folded, and placed on the trolley while solar cables and battery DC cables remain connected.

As with all SolarWave solutions, the WP1200M is a reliable, high-quality product specifically designed for use in remote rural areas under tough operating conditions. Its rugged aluminum cabinet and all internal components meet IP class 54 and hence effectively withstands dusty and wet climatic conditions. A tarp is included for additional weather protection in case of extended periods of outdoors storage. Technical Specification

Solar power 200 W Battery capacity 12 V / 90 Ah (AGM Deep Cycle) Battery life charge storage At least 1 year Electrical output 12 V / 10 A, 5 V / 2 A (USB) Water cleaning capacity Nominal 1,200 liters per hour * Type of pump Johnson Aqua Jet WPS 5.2 diaphragm Type of pre-filters 5 um carbon, 5 um cotton, 20 um cotton Power consumption Nominal 75 W (peak 100 W) Dimensions (in transport mode) 1,180 x 680 x 460 mm Weight (including trolley) 85 kg Max. vertical distance between water surface level and the location of the unit 3 m

Max. inlet water pressure 1 bar Water inlet, outlet Standard garden hose connections, ½” Recommended max. inlet water temperature 40 °C Security and safety Auto shut-off in case of lamp malfunction

* Depending on actual operating condition such as type of filters, condition of filters, lift head etc. Maintenance

UV lamp Replace every 9,000 hours or at least once a year

Filters Replace or clean as needed

Battery Replace as needed

For safe and easy transport, the WP1200M comes with an integrated rugged light-weight aluminum trolley with handle carrying grips and two heavy duty air pumped wheels suitable for rough roads and staircases. The solar panel array is easily dismantled, folded, and placed on the trolley while solar cables and battery DC cables remain connected.

As with all SolarWave solutions, the WP1200M is a reliable, high-quality product specifically designed for use in remote rural areas under tough operating conditions. Its rugged aluminum cabinet and all internal components meet IP class 54 and hence effectively withstands dusty and wet climatic conditions. A tarp is included for additional weather protection in case of extended periods of outdoors storage. Technical Specification

Solar power 200 W Battery capacity 12 V / 90 Ah (AGM Deep Cycle) Battery life charge storage At least 1 year Electrical output 12 V / 10 A, 5 V / 2 A (USB) Water cleaning capacity Nominal 1,200 liters per hour * Type of pump Johnson Aqua Jet WPS 5.2 diaphragm Type of pre-filters 5 um carbon, 5 um cotton, 20 um cotton Power consumption Nominal 75 W (peak 100 W) Dimensions (in transport mode) 1,180 x 680 x 460 mm Weight (including trolley) 85 kg Max. vertical distance between water surface level and the location of the unit 3 m

Max. inlet water pressure 1 bar Water inlet, outlet Standard garden hose connections, ½” Recommended max. inlet water temperature 40 °C Security and safety Auto shut-off in case of lamp malfunction

* Depending on actual operating condition such as type of filters, condition of filters, lift head etc. Maintenance

UV lamp Replace every 9,000 hours or at least once a year

Filters Replace or clean as needed

Battery Replace as needed

For safe and easy transport, the WP1200M comes with an integrated rugged light-weight aluminum trolley with handle carrying grips and two heavy duty air pumped wheels suitable for rough roads and staircases. The solar panel array is easily dismantled, folded, and placed on the trolley while solar cables and battery DC cables remain connected.

As with all SolarWave solutions, the WP1200M is a reliable, high-quality product specifically designed for use in remote rural areas under tough operating conditions. Its rugged aluminum cabinet and all internal components meet IP class 54 and hence effectively withstands dusty and wet climatic conditions. A tarp is included for additional weather protection in case of extended periods of outdoors storage. Technical Specification

Solar power 200 W Battery capacity 12 V / 90 Ah (AGM Deep Cycle) Battery life charge storage At least 1 year Electrical output 12 V / 10 A, 5 V / 2 A (USB) Water cleaning capacity Nominal 1,200 liters per hour * Type of pump Johnson Aqua Jet WPS 5.2 diaphragm Type of pre-filters 5 um carbon, 5 um cotton, 20 um cotton Power consumption Nominal 75 W (peak 100 W) Dimensions (in transport mode) 1,180 x 680 x 460 mm Weight (including trolley) 85 kg Max. vertical distance between water surface level and the location of the unit 3 m

Max. inlet water pressure 1 bar Water inlet, outlet Standard garden hose connections, ½” Recommended max. inlet water temperature 40 °C Security and safety Auto shut-off in case of lamp malfunction

* Depending on actual operating condition such as type of filters, condition of filters, lift head etc. Maintenance

UV lamp Replace every 9,000 hours or at least once a year

Filters Replace or clean as needed

Battery Replace as needed

About SolarWave- Swedish company, founded in 2009.

- Subsidiaries in Tanzania and Uganda.

- Resellers in Nigeria, Cameroon, The Gambia, and Namibia.

- Registered supplier to the UN since 2010.

- Approved by the UNFCCC (United Nations Framework Convention on Climate Change).

- Approved by the Tanzania Bureau of Standards

- Approved by the Uganda Appropriate Technology Center.

SolarWave implements Good Water projects in Africa, funded by governmental agencies, NGO's, and corporate clients.

Sustainable community owned solutions – serving up to 10,000 peopleProven, robust and chemical free technologies – 100% solar poweredLow operation and maintenance costs

Each Good Water project includes awareness raising, installation, training, operation and maintenance, as well as follow-up and monitoring.

Typical full project cost, including equipment, installation, training, and operation and maintenance is 4 USD per user per year or 4 USD per 1,000 liters of safe drinking water produced.

The GoodWater concept

mailto:sales@sunnytek.semailto:barnabe@sunnytek.nuhttp://www.sunnytek.sehttp://www.sunnytek.nu

�

Sunnytek Solar Sweden Home water city systems Page � /� 24 Jan 20173 3

Submersible solar pumps for deep wells and high pressure operation in small and large installations.

These pumps can have a integrated solar panel inverter inside pumps and it is just to connect to solar panels. If we have larger back battery up for night operation we have an inverter/controller at surface. Normally these pumps deliver relative clean water so we add a simpler filter at output from storage tank. It is best to have a tank here to save energy costs.

Model Capacity Flow /day Families Diameter housing KWLit/Min 7 hours ( 5 persons) Bore hole larger

SM50/30 50 Lit/min/30M 21 M3 75 138 mm bore hole 0.75 KWSM50/60 50 Lit/min 60M 21 M3 75 138 mm 1,1 KWSM 80/60 80 Lit/min 60 M 33 M3 85 98 mm Body 2 KWSM 120/60 120 Lit/min 60 M 50M3 125 98 mm Body 2.2 KW

Other models available down to 400 meter depth and larger capacity. Practically it is better with several bore holes in parallel as rick for dry holes are reduce and you get less particles.

Solar panel systems and battery storage have as typical output.

0.75KW pumps for 7 hours or more needs 2KW solar panels and 2 KW battery storage1.1 KW pumps for 7 hours or more needs 3KW solar panels and 3 KW battery storage2 KW pumps for 7 hours or more needs 4 KW solar panels and 4 KWH battery2.2 KW pumps for 7 hours or more needs 5 KW solar panels and 5 KWH battery.

If used for more than 7 hours it is just to add proportional in panels. Battery needs 2 X more increase. In rain forest areas extra margins are needed as many days are cloudy.

Battery is Bi-Polar Ni-Mh om larger systems and GEL based long life deep cycle battery on smaller sites. ( 3500 cycles -50%) .The small systems are designed for 7-10 years life cycle and larger 10-20 years life.

Sunnytek Sweden Glimmervägen 8 187 34 Täby, Sweden E-Mail sales@sunnytek.seSunnytek Burundi Avenue Ndora 3 No 27 Bujumbura, Burundi E-Mail barnabe@sunnytek.nuWeb sites www.sunnytek.se www.sunnytek.nu All Registered companies

Tel: 08-630 08 90 Fax: 08-630 02 16 info@robota.se www.robota.se

Max kabellängd i m, vid olika motorstyrkor, mellan pump och strömkälla

Motoreffekt 1,5 mm2 2,5 mm2 4mm2 6mm2

600 W 70 m 120 m 180 m 270 m

900 W 50 m 80 m 125 m 190 m

1500 W 35 m 60 m 90 m 140 m

Typ beteckning

Artikel nummer

Motor Effekt

kW Strömart Elkabel area mm

Antal M elkabel Brunnsdjup

WPS 2- 50/40 216610 0,9 1x230V 3x1,5 40 40

WPS 2- 65/60 216615 0,9 1x230V 3x2,5 60 60

WPS 2- 75/80 216620 1,5 1x230V 3x4 80 80

WPS 2- 90/10 216625 1,5 1x230V 3x6 100 100

PRODUKTBLAD

RENVATTEN PUMPPAKET WPS 3”

231_renvattenpumpar_pumppaket_wps.doc

Pumppaket WPS 3” (72mm) För olika brunnsdjup 20 till 100 m. Pumppaketen innehåller WPS 3” undervattenspump, påskarvad kabel och vattenfast eltejp. Pumpfakta 3” undervattenspumpar för djupborrade dricksvatten- och energibrunnar. Typiska användningsområden är te x dricksvattenförsörjning för enstaka eller flera hushåll samt bevattning. Fördelar är bl a små mått och lätt vikt samt enkel elektrisk anslutning (1-fas) vilket innebär låga installationskostnader. Mjukstartsfunktionen i motorn medför minimalt slitage på de hydrauliska delarna (pumphjul mm) samt minimerar risk för kabelskador eftersom pumpen rör sig minimalt vid start och stopp. Den avancerade motorn reducerar risker för haverier vid torrkörning. ”Högriskbrunnar” bör ha externt torrkörningsskydd. Motorn skyddas även i viss mån mot överspänning och underspänning. Produktbild:

Kapacitetsdiagram:

Pumptyp:

Datum: 2010-11-18

Djupbrunnspumppaket

Data:

Tel: 08-630 08 90 Fax: 08-630 02 16 info@robota.se www.robota.se

Max kabellängd i m, vid olika motorstyrkor, mellan pump och strömkälla

Motoreffekt 1,5 mm2 2,5 mm2 4mm2 6mm2

600 W 70 m 120 m 180 m 270 m

900 W 50 m 80 m 125 m 190 m

1500 W 35 m 60 m 90 m 140 m

Typ beteckning

Artikel nummer

Motor Effekt

kW Strömart Elkabel area mm

Antal M elkabel Brunnsdjup

WPS 2- 50/40 216610 0,9 1x230V 3x1,5 40 40

WPS 2- 65/60 216615 0,9 1x230V 3x2,5 60 60

WPS 2- 75/80 216620 1,5 1x230V 3x4 80 80

WPS 2- 90/10 216625 1,5 1x230V 3x6 100 100

PRODUKTBLAD

RENVATTEN PUMPPAKET WPS 3”

231_renvattenpumpar_pumppaket_wps.doc

Pumppaket WPS 3” (72mm) För olika brunnsdjup 20 till 100 m. Pumppaketen innehåller WPS 3” undervattenspump, påskarvad kabel och vattenfast eltejp. Pumpfakta 3” undervattenspumpar för djupborrade dricksvatten- och energibrunnar. Typiska användningsområden är te x dricksvattenförsörjning för enstaka eller flera hushåll samt bevattning. Fördelar är bl a små mått och lätt vikt samt enkel elektrisk anslutning (1-fas) vilket innebär låga installationskostnader. Mjukstartsfunktionen i motorn medför minimalt slitage på de hydrauliska delarna (pumphjul mm) samt minimerar risk för kabelskador eftersom pumpen rör sig minimalt vid start och stopp. Den avancerade motorn reducerar risker för haverier vid torrkörning. ”Högriskbrunnar” bör ha externt torrkörningsskydd. Motorn skyddas även i viss mån mot överspänning och underspänning. Produktbild:

Kapacitetsdiagram:

Pumptyp:

Datum: 2010-11-18

Djupbrunnspumppaket

Data:

fRAMELESSELEGAncE Its uniform black appearance makes the frameless Solibro module the perfect fit for sophisticated visual applications. The active layer is protected from environmental influences on both sides by stable glass substrates, and the frameless design allows self-cleaning by facilitating optimum drain-off of rainwater, even at small tilt angles.

RELIABILITY“MAdE In GERMAnY” Our SL2 modules are manufactured in a state-of-the-art factory near Leipzig in Germany and tested according to recognised high standards – longer and harder than required by IEC 61646. Furthermore, the quality of every module is ensured by a complete check including a 100% electroluminescence procedure. Solibro modules therefore offer you not just higher yields today, but also a reliable system for the next 25 years.

* Installed systems by 2010; http://dkasolarcentre.com.au/locations/alice-springs

THE NU

MBER 1

AT THE

ALICE SP

RINGS S

OLAR

CENTRE

, AUSTR

ALIA

FOR 5 Y

EARS

mailto:sales@sunnytek.semailto:barnabe@sunnytek.nuhttp://www.sunnytek.sehttp://www.sunnytek.nu