SUMMARY OF BOQ Name of the work: FURNISHING, …
Transcript of SUMMARY OF BOQ Name of the work: FURNISHING, …
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 1 of 21
SUMMARY OF BOQ
Name of the work: FURNISHING, ELECTRICALS etc. AND AIR
CONDITIONING WORKS AT PROPOSED REGIONAL OFFICE, BANK OF
BARODA, SHAHJAHANPUR REGION AT SHAHJAHANPUR (U.P.)
Item rates per unit are inclusive materials, labour, use of equipment,
transportation, curing, finishing, profit, taxes, etc. complete.
Sl.
No.
Particulars Amount in RS
1 FURNISHING WORKS
2 ELECTRIFICATION/COMPUTER WIRING/TELEPHONE
WIRING/DATA CABLING WORKS
3 AIR-CONDITIONING WORKS
4 Total….(Sl No 01 To 03)
5 Discounts If Any On Sl No 04
6 Sub Total….(Sl No 04 - 05)
7 GST On Sub Total….Sl No 06
8 Grand Total…(Sl No 06+ Sl No 07) In Figures
Grand Total in Words:
(Signature) Seal/STAMP
of Company
Name of Authorised signatory
Designation
Name of company
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 2 of 21
BILL OF QUANTITIES
BOQ FOR FURNISHING WORKS AT PROPOSED REGIONAL OFFICE, BANK OF BARODA, SHAHJAHANPUR
REGION AT SHAHJAHANPUR (U.P.)
S.NO. DESCRIPTION OF JOBS QUANTITY UNIT Rates Amount (Rs.)
1 CARPENTRY WORKS
A FULL HT. SOLID PARTITIONS - Providing and fixing in position
full height solid partition in position as indicated in the
drawing excluding the door made out of aluminium hollow
sections of 65mm x 37mm size 1.5mm thick of JINDAL /
INDAL make as internal frame structure placed horizontally
& vertically in 550 mm x 550 mm or 600mm x 600mm
center to center or as directed by the Architect. The
alternate corner vertical members of the partition shall be
taken upto the ceiling level (payment shall be made for the
partition measured upto below the false ceiling level) and
the same shall be anchored to the ceiling securely with the
help of suitable cleats. The framework shall be fixed with 9
mm thick flexible plywood conforming IS 710 of approved
make on both sides finished as per folllowing specifications.
The necessary openings in the partitions shall be provided
for A.C. Grill, Electrical Conduits, Electrical Switches, Light
Fixtures,Painting, A.C. Opening, Running display Speaker,
Fire Detectors, Electric Fixtures, Wall Paintings, Planter
Boxes, Mirror,fixtures etc. complete as per
requirements/instructions of the Architect / EngineerThe
height of the partitions upto soffit of false ceiling / laminate
finish top shall be considered for payment. The alternate,
corner vertical members of the partition shall be fixed with
necessary brackets /supports at RCC levels. The framework
above the false ceiling shall not be considered for payment.
The partition will be measured from the plywood covered
area to the nearest cm. The item does not include the doors.
The Partition shall be finished with 1.0 mm thick laminate of
approved shade and make on both sides with the provision
of groove in the same of size 12mm x 12mmx 18 mm ht. and
as directed by the Architect etc. complete.
PLEASE NOTE: Mica shade to be approved before
execution.
a FULL HT SOLID PARTITIONS 2200 SFt
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 3 of 21
B LOW HEIGHT PARTITIONS: Providing and fixing on site in
required position LOW HEIGHT PARTITIONS with laminate
finish upto the height 3'-6" and glass/ soft board with fabric
as per design/detail above it of height1'-6" cut in shape
made out Hard Wood (Sal) sections of full size 2" X 2"
treated with anti termite treatment space at 24"
horizontally and vertically. C/C with proper half notch joint
between the horizontal and Vertical members and lap joint
between two straight members with proper fixing, to be
covered with 6mm B.W.P. of approved make on either side
so as to make a composite partition thickness of 2.5".
PLEASE NOTE: Mica shade to be approved before
execution.
670 SFt
Partition shall be finished in laminate of Approved shade
make and design fixed with Fevicol and mild steel nails and
supports as required for adequate strength with 8mm thk.
glass panel design and fixed with teak wod beading as
directed on site and shown on drawing. The flab doors will
also be include in the making of the low ht. partition with
the same specifications as of low ht. partions. The item is
inclusive of all hardwarefor fixing the same on to the floor
and wall as required, Complete.
C PANELLING - COLUMN / WALL PANELING -
LAMINATE FINISH WITH GROOVES
(i) Providing and fixing column/wall panelling made out of
aluminum hollow section of 65mm x 37mm size 1.5mm thick
of JINDAL / INDAL / equivalent as internal frame structure
placed horizontally & vertically in 550 mm x 550 mm or
600mm x 600mm center to center or as directed by the
Architect. The framework shall be fixed with 12-18 mm thick
plywood confirming IS 710
4620 SFt
The panelling shall be finished with Laminate , SF laminate ,
Zurich Laminate , 4mm - 6mm thk toughned glass in white
colour of approved shade and colour all complete as per
instructions of Architect. The item also includes scaffolding
for maximum height upto 4.0 m from floor level.
PLEASE NOTE: Mica shade to be approved before
execution.
D STORAGE LOW HEIGHT/ OVER HEAD STORAGES
Providing and fixing storage cabinet 750/1200 mm high
made out of 19mm thick plywood conforming IS 710
plywood of approved make including the fixing of shelves at
400 mm to 450 c/c and the shutters shall be in 19 mm thick
block board and back covered with 8 mm plywood. The top
edge shall be 1.5" to 2" thick and finished with 1.0 mm thk.
laminate dull white laminate of the approved make and
shade with the provision of necessary grooves between the
top edge and shutters below. The shutters shall be fixed
with S type L hinges of approved make so as to get an equal
8 mm groove between all the shutters at the opening and
hinged end
of every shutter as per the detailed drawing.
900 SFt
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 4 of 21
The shutter shall be fixed with SS chain from inside so as to
open the shutter less than 90 degree and to avoid the
breaking of laminate at the hinged end. The shutter shall be
finished externally with approved quality 1.0 mm thk.
laminate of approved shade and make and internally would
be finished with 0.8 mm thk. balancing white or off-white
laminate. The rate shall be inclusive of provision of SS
"D"type handles 4" or 6" as approved, Godrej or Vijayan
locks with 3 keys and all the necessary hardware, fixtures,
fittings etc complete in all respects as directed by the
Architect.
PLEASE NOTE: Mica shade to be
approved before execution.
E TABLES AND COUNTER
Providing and supplying Table and Counter IN PROFILE
MANNER made out of using 19 mm ply with an underside of
50 mm wide plywood conforming IS 710 ply all along the
sides of table top, with computer cpu storage trolley,
telescopic key board drawer, monitor brackets, SS cable
manager, glass top etc., with storage units below with 3
drawers on telescopic channel complete underside storage
with shutter. The bottom of the storage unit to have 75 mm
high skirting in mica having size 450 mm x 600 mm x 730
mm, all visible internal surface of drawers and storage shall
be Laminate or Zurich Laminate d (1.0 mm thick) in
approved shade and brand, complete with necessary
hardwares as per specifications. All edges of the plywood
conforming IS 710 to be fixed with TW beading patti 10 mm
thick with necessary width as required, with external visible
surfaces with approved shade of 6 mm thick acrylic surface
corian on all visible surfaces of the necessary 2 colours as
approved complete with all hardwares as per specifications
and drawings and on top 12mm clear glass cristal edge
finish.
PLEASE NOTE: Mica and corian shade to be approved
before execution.
1 WAITING LOBBY
i RECEPTION TABLE (as per detail & design) (acrylic solid
surface top and front extra as per Sr. No. 3a) 1 nos..
2 MARKETING
i LINEAR WORKSTATION 2'-0" wide as per detail & design.
(acrylic solid surface top and front extra as per Sr. No. 3a) 8 rft
3 AGM CABIN
i OFFICER TABLE (8'-0" x 3'-6")including side table (3'-6" x 1'-
6") (acrylic solid surface top and front extra as per Sr. No.
3a)
1 nos.
4 A.I.+SERVICES+COMPLIENCES
i OFFICER TABLE (5'-0"X2'-0") incl. side table (3'-0"X1'-6")
(acrylic solid surface top and front extra as per Sr. No. 3a) 1 nos..
ii LINEAR WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 8 rft
iii L-shaped WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 1 nos..
5 D.R.M.
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 5 of 21
i OFFICER TABLE (6'-0" x 2'-6")including side table (3'-0" x 1'-
6") (acrylic solid surface top and front extra as per Sr. No.
3a)
1 nos.
6 OFFICE ADMINISTRATION
i OFFICER TABLE (5'-0" x 2'-6")including side table (3'-0" x 1'-
6") (acrylic solid surface top and front extra as per Sr. No.
3a)
1 nos.
ii LINEAR WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 4 rft
7 PRIORITY SECTOR + F.I. + COMPLAINT (acrylic solid surface
top and front extra as per Sr. No. 3a)
i OFFICER TABLE (5'-0" x 2'-6")including side table (3'-0" x 1'-
6") (acrylic solid surface top and front extra as per Sr. No.
3a)
1 nos.
ii LINEAR WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 11 rft
8 PLANNING
i OFFICER TABLE (5'-0" x 2'-6")including side table (3'-0" x 1'-
6") (acrylic solid surface top and front extra as per Sr. No.
3a)
1 nos.
ii LINEAR WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 4 rft
9 LEGAL+SECURITY+I.T.+ECM (acrylic solid surface top and
front extra as per Sr. No. 3a)
i L-shaped WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 4 nos..
10 RAJBHASHA+SPARE
i L-shaped WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 2 nos..
11 H.R. SECTION
i OFFICER TABLE (4'-0" x 2'-0")including side table (3'-0" x 1'-
6") (acrylic solid surface top and front extra as per Sr. No.
3a)
1 nos.
ii LINEAR WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 16 rft
12 CREDIT SECTION
i OFFICER TABLE (5'-0" x 2'-0")including side table (3'-0" x 1'-
6") (acrylic solid surface top and front extra as per Sr. No.
3a)
1 nos.
ii LINEAR WORKSTATION (2'-0" WIDE) 12 rft
13 CRM+RECOVERY SECTION
i OFFICER TABLE (5'-0" x 2'-0")including side table (3'-0" x 1'-
6") (acrylic solid surface top and front extra as per Sr. No.
3a)
1 nos.
ii LINEAR WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 12 rft
14 SME+COLLECTION
i OFFICER TABLE (5'-0" x 2'-0")including side table (3'-0" x 1'-
6") (acrylic solid surface top and front extra as per Sr. No.
3a)
1 nos.
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 6 of 21
ii LINEAR WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 12 rft
15 SPARE
i L-shaped WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 4 nos..
16 TRACTOR SECTION
i OFFICER TABLE (4'-0" x 2'-0")including side table (3'-0" x 1'-
6") (acrylic solid surface top and front extra as per Sr. No.
3a)
1 nos.
ii LINEAR WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 4 rft
17 S.M.S.
i OFFICER TABLE (4'-0" x 2'-0")including side table (3'-0" x 1'-
6") (acrylic solid surface top and front extra as per Sr. No.
3a)
2 nos.
ii LINEAR WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 8 rft
18 ROSARB SECTION
i OFFICER TABLE (5'-0" x 2'-0")including side table (3'-0" x 1'-
6") (acrylic solid surface top and front extra as per Sr. No.
3a)
1 nos.
ii LINEAR WORKSTATION (2'-0" WIDE) (acrylic solid surface
top and front extra as per Sr. No. 3a) 12 rft
19 CONFERENCE HALL
i CONFERENCE TABLE (32'-0"X3'-6") as per drg (acrylic solid
surface top and front extra as per Sr. No. 3a) 32 rft
ii table for master computer 1 nos.
2 TOUGHENED GLASS WORK
a Toughened glass partition: Providing and fixing of
fully glazed frameless glazed partition made out of 12
mm thk. Toughened glass approved make supported
on aluminium frame work of 18 Gauge and Aluminium
powder coated "U" channel, grouted in hard flooring
with SS finish patch fittings of Enox or approved
make.. complete with all respect with all hardware,
fittings, fixtures etc. complete in all respects. The
partition shall include the provision of the necessary
cut-outs if required for communication or as directed
by the Architect or Client and the edges of the same
shall be mirror polished along all edges. the rate is not
inclusive of the glass doors.
The above also includes 3M frosted film (Baroda
Radiance logo) to be installed on glazed partition as
per design approved by Bank.
i main entrance 100.00 sft
ii rear lobby 40.00 sft
iii urinal partition 3.00 nos.
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 7 of 21
b GLAZED DOOR Providing and fixing of fully glazed
frameless door made out of 12 mm thk. Toughened
glass and the door shall be fixed with Enox or
approved make floor springs with SS finish patch
fittings on top, bottom and lock of Enox or approved
make. The door shall have lock in the center of
approved make and 450 mm to 600 mm long SS
handle of 25 mm dia. to be fitted horizontally/
vertically as per instructions of the Architect. The rate
shall be including the making of necessary holes in the
glass for Access control locks, complete with all
respect with all hardware, fittings, fixtures etc.
complete in all respects. The above also includes 3M
frosted film (Baroda Radiance logo) to be installed on
glazed partition as per design approved by Bank.
i main entrance (2'-6"X7'-0") 2 nos.
ii rear lobby (3'-6"X7'-0") 1 nos.
3 ACRYLIC SOLID SURFACE-
a 6mm Thick ACRYLIC SOLID SURFACE- STARON (
SAMSUNG / LOTTE )Providing and fixing 6mm thick
Acrylic Solid Surfaces of Approved colour/make fixed
on plywood OR Partition, Panelling with necessary
adhesive in required shape OR fixed as per
Manufacturer's Specification to required surface
including edge moulding , polishing, buffing, joint's
matching etc. complete as per detail drawing and
instructions of Architect. MAKE : MARINO
,SAMSUNG / LOTTE STARON ,DUPONT , FLEXIBOND
(top and front of cash counters as per drawing)
850 SFt
4 Providing, fixing & fabricating pinup board / notice
board as per design provided with enamel paint over
exposed suracfes and velvet cloth as and where
required, complete in all respect.
30 Sf
t
5 BOMBAY SLIDING WINDOWS
Providing and fixing aluminium windows of 4" X 1
3/4" of 16 gauge Aluminum black powder coated top
and bottom frame, with floor springs, locks, handles,
providing door opening and openable windows with
and all necessary hardware to complete the job (glass
to be of 12 mm thick of approved make)
150 sqft
6 ALUMINIUM GLAZED DOOR AT REAR ENTRANCE
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 8 of 21
i Providing and fixing of a entrance door of 4" X 1 3/4"
of 16 gauge Aluminum black powder coated top and
bottom frame, with floor springs, locks, handles,
providing door opening and openable windows with
and all necessary hardware to complete the job (glass
to be of 12 mm thick of approved make)
40 sqft
7 ALUMINIUM GLAZED WINDOWS
ii Providing and fixing three track sliding upvc windows
incl complete hardware as per drg
120 sqft
8 ROLLING SHUTTER AT REAR ENTRANCE
i Providing and fixing rolling shutter incl. complete
hardware
40 sqft
9 BLINDS
Supplying and fixing of vertical blinds of approved
shade and design complete with supports, cord etc.
260 sqft
10 ANTI TERMITE TREATMENT
antitermite treatment on whole branch incl. furniture
and fixtures with a gurantee bond of 5 years to be
furnished to bank with bill before
payment
6415 sqft
11 FALSE CEILING
a INDIA GYPSUM FALSE CEILING Providing and fixing
suspended false ceiling, which includes providing and fixing
GI perimeter channels of size 0.55mm thick having one
flange of 20mm and another flange of 30mm and a web of
27mm along with perimeter of ceiling, screw fixed to brick
wall/ partition with the help of nylon sleeves and screws at
610mm centers. The suspending GI intermediate channel of
size 45mm, 0.9mm thick with two flanges of 15mm each
from the soffit at 1220mm centers with ceiling angle of
width 25mmx 10mmx 0.55mm thick fixed to soffit with GI
cleat and steel
expansion fastener.
3220 SFt
165 SMT Ceiling section of 0.55mm thickness having knurled
web of 51.5mm and two flanges of 26mm each with lips of
10.5mm are then fixed to the intermediate channel with the
help of connecting clips and in direction perpendicular to
the intermediate channel at 457mm centers. 12.5mm
tapered edge Gypboard (Conforming to IS- 2095-1982) is
then screwed fixed to ceiling section with 25mm dry wall
screw at 230mm centers. Screw fixing is done mechanically.
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 9 of 21
Finally the boards are to be jointed and finished so as to
have a flush look which includes filling as finishing the
tapered and square edge of the boards with joining
compound, paper tape and two coats of primer suitable for
Gypboard (as equivalent) extra frame work for electrical
fittings, A/C diffusers, and/or any other cut-out, trap doors,
wooden shadow battens (hollock wood black enamel
painted-25x40mm) at wall peripheries and ends, 12mm
thick MDF board for pelmet etc. complete including opening
to be made for AC grills, light fittings, trap doors etc. (The
quoted rate shall be inclusive of
suspenders at all heights).
b same as above but for vertical surface 950 rft
c MODULAR CEILING Providing and fixing modular false
ceiling of 600 mm x 600 mm centre to centre and 18
mm thick square mineral fibre board to be fixed on
frame work of Aluminium sections for suspended false
ceiling consisting of Aluminium T 2" X 1 1/2" (50 mm X
40 mm) weighing 0.39 kg/m at 60 cms centre to
centre and fixed with 1/2" x 1/2" (15 x 15 mm) flanges
weighing 0.19 kg/m suspended on 6 mmdia. mild steel
rod weighing 0.22 kg/m, fixed on wall and beams
including rounding of the edges with aluminium T of
2" x 1 1/2" (50 mm x 40 mm) weighing 0.39 kg/m etc.
(All aluminium sections shall be anodized/powder
coated) including all labour, material, lifts etc.
complete. Make - Armstrong make with silhoutte
groove
1720 SFt
12 SATIN PAINT: Erecting scaffolding at all levels, preparing
the surface by rubbing the surface by sand papers of
different grade, removing all dirt, smoke, grease, loose
plaster etc. if any from the existing surface cleaning the
surface thoroughly and removing all the dirt from the
surface. Providing and applying three coats of approved
quality plastic paint over the required number of coats of
approved cement primer in all internal walls all complete
including the carrying out of the necessary lambi work with
Birla white putty (2 COATS) as per manufacturers
specification and finished in plain, clear and smooth or
rough surface as per the site condition etc. standard
specifications and as directed by the Architect with SATIN
PAINT of approved manufacturer of approved shade, colur
and pattern and design.
a gypsum false ceiling 4230 SFt
b brick walls and ceiling 11300 SFt
c exterior walls 6000 SFt
Total
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 10 of 21
BOQ FOR ELECTRIFICATION/COMPUTER WIRING/TELEPHONE WIRING/DATA CABLING WORKS AT
PROPOSED REGIONAL OFFICE, BANK OF BARODA, SHAHJAHANPUR REGION AT SHAHJAHANPUR (U.P.)
QUANTITY & RATE ANALYSIS
S.No. DESCRIPTION UNIT QTY. Rates Amount (Rs)
A GENERAL ELECTRIFICATION
1 Manufacturing, Designing, Supplying,Installation, Testing &
Commissioning Of Wall/Free Standing Floor Mounted Dust And Vermin
Proof Compartmentalized Cubical Pannel Made Of 16 SWG CRCA Sheet
Required Hardware , Duly Painted By Either Two Coats Of Zinc/ Red
Oxide Primer Followed By Two Coats Of Synthetic Enamel Paint Or
Powder Coating In Grey Or Required Shade After Rinsing. The Panel
Having PU/Neoprene Rubber Gasket Of Not Less Than 3mm Thickness ,
Separate Detachable Gland Plate M.S. Base Channel , Hinged Door With
Locking Arrangement For Equipment/ Switchgear. Complete In All
Respect As Per Bank`S Electrical Load. Size:-4’-0” X 3’-0” Electrical Panel
Box 1 Nos. MCCB TPN 100A 1 Nos.MCCB TPN 63A For Light Power
Andups (To Be Fixed In Above Panel) Including Installation Etc.
Complete. 2Nos.MCB`S 32A TPN (For Light &
Power.) 2 Nos.MCB`S 32A DP (For UPS Input & Output Supply) 2
Nos.MCB`S 6-32A SP 20 Nos.Change Over Switch TPN 415v, Rating 63A
Category - II 1 Nos. Dust And Vermin Proof Compartmentalized Cubical
Pannel Made Of 16 SWG CRCA Sheet Required Hardware , Duly Painted
By Either Two Coats Of Zinc/Red Oxide Primer Followed By Two Coats Of
Synthetic Enamel Paint Or Powder Coating In Grey Or Required Shade
After Rinsing. The Panel Having PU/Neoprene Rubber Gasket Of Not
Less Than 3mm Thickness , Separate Detachable Gland Plate
M.S. Base Channel , Hinged Door With Locking Arrangement For
Equipment/Switchgear. Complete In All Respect As Per Bank`S Electrical
Load. Size:-4’-0” X 3’-0” Electrical Panel Box 1 Nos.MCCB TPN 100A 1
Nos. MCCB TPN 63A For Light Power And UPS (To Be Fixed In Above
Panel) Incl. Installation Etc. Complete. 2 Nos. MCB`S 32A TPN (For Light
& Power.) 2Nos.MCB`S 32A DP (For UPS Input & Output Supply) 2 Nos.
MCB`S 6-32A SP 20 Nos. Change Over Switch TPN 415v, Rating
63A Category - II 1 Nos.
Nos. 1
2 Providing and fixing point wiring through PVC conduits 25mm/20mm IS
9537 part-iii with 2 Nos of 1.5 sq.mm and 1 No. of
1.0 sq.mm (for earth) PVC insulated copper conductors with MK make
plat type (modular) switches complete with all accessories as detailed in
specifications. The switch boxes shall be flush mounded with partition
works or directed by the Architect and shall done co- ordination with
interior furniture works etc. including 2.5 sq. mm 3 nos circuit wiring to
each switch board.
a For Primary light points. Nos. 460
b - Do - As above for secondary light points (looping from primary-
without control switches).
Nos. 70
c -Do - As per item No.2 but for Bell point with Ding- Dong bell
(Primary)
Nos. 4
d For independent 6 Amps plug point with 6 Amps 3 pin switch
socket combine
Nos. 24
e For 6 Amps switch socket 3 pin combined on the lighting switch
board (secondary/ half point)
Nos. 30.00
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 11 of 21
g Wiring to Telex, Fax, etc to be drawn directly from Distribution
Board using 2.5 single PVC copper conductor wire 1 x 1.5 sq.mm
PVC insulated running earth wire with approved make control
switches.
Nos. 10
h Wiring for Exhaust Fans - do - as per item No. 5 complete. (Rate
shall include connection with 3 core 0.5sq.mm flexible copper cable
from ceiling rose/walls to the exhaust fan.)
Nos. 8
i Supply & fixing 6/16A power switch socket combine with indicator
complete with G.I. Switch mounding box of MK India
make. complete.
Nos. 20
j S/F of AC point incl. starter & wiring as per item no.2 using 2 x 4
sqmm + 1 x 1.5 sqmm (for earth)
Nos. 25.00
TOTAL
B Computer Wiring (Thru’Stabilizer/UPS)
1 Wiring to Primary plug outlets for computer points in PVC conduit
using 2 x 2.5 s.w.g. pvc Copper conductor wire, 1 x 1.5 sq.mm PVC
insulated running earth wire with approved make Control switches
terminating at Stabilizer/UPS location and including supplying &
fixing 1 No. 15 Amps switch with 3 Nos x 5 Amps plug socket with
plate and box connections etc as required. including cuircuit wiring
.( 1 cuircuit 1 looping)
RM 650.00
2 As Item No.1 but wiring to raw power plug points (5/15A ) ( 1
switch 1 socket set)
RM 350.00
3 - do as above but for printer locations using for 15 Amp plug
point.
RM 150.00
4 As in Item No.3 but wiring to Secondary plug points for printers
(5/15A).
RM 50.00
5 P/Fixing laying 3 Core x 4 sq.mm armored copper cable from UPS
panel board to Computer DB Box.
RM 60.00
6 Providing and fixing 10-ways Computers DB Box with 1 No 40
Amp DPMCB with 8 Nos 10ASPMCB. ( double door)
nos 2.00
6 Providing and fixing UPS point nos 65.00
7 - Do as above 6 sq.mm x 4 core flexible copper conducting wire
for UPS input/output.
RM 210.00
8 Cutting the floor for laying the Data Cables of 14”/16”, 12”/ 14”wide
trenches by carefully removing the floor tiles & bedding material etc
for power, telephone, UPS and computer lines etc; the rate shall
inclusive of filling the trenches with mix of 1:2 PCC after laying of
the race ways/conduits for smooth finish upto original tile level etc;
(the rate shall include the cost of race ways/conduits of 25 mm dia.
(5 Nos of wires of each pipe can be drawn)- complete.
RM 32.00
9 10" x 10” size junction boxes with stainless steel cover. Nos 11.00
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 12 of 21
10 U.P.S. MAINS: Supplying, installing, testing and wiring of UPS panel
boards (M.S. power coated panels board) as follows: 63A DPMCB for
UPS input x 2 Nos 40 A DPMCB for Stabilizer x 1 No.- UPS input 32A
x 2 No., DPMCB for UPS output.
Nos 1.00
11 EARTHING STATIONS. ( G.I.) Supplying, installation, testing and
commissioning 0.1 Ohms earth stations upto 6’-0” below the ground
level, confirming to IS 3043, complete with all required materials 2’-
0”x 2’-0” x 4” G.I. plate with like charcoal, coal salt in alternative
level, G.I. Nut bolt and washers including watering with 19mm dia GI
B-Class pipe and funnel with mesh, cement concrete chambers,
heavy duty cast iron hinged cover plate with
G.I. frame including excavation and as per the instructions
Nos 3.00
12 Providing and laying 10 sq mm green colour earth wire laying earth
pith to 1 no for Main panel board and 1 no for UPS panel
board .
RM 30.00
TOTAL
C FITTINGS AND FIXTURES:
1 Providing and fixing 40w ( 2'.0"X 2'.0'') size square type led fitting
concealed complete as per instruction (COMPACT 40 W LED
MATRIX-POP)/ Bajaj/ Philips
Nos 45.00
2 Providing and fixing LED LIGHT (10W) concealed complete as per
instruction (COMPACT 20 W OMEGA LED COB ROUND /
Bajaj/ Philips)
Nos 140.00
3 Supply & Installation of 22 / 30 W LED Light Batten Patti with all
required accessories. (Crompton / Phillips)
Nos 10.00
4 Supply & Installtion of LED LIGHT STRIP 6W / Mtr for various areas
for Cove Lighting inclusive of one driver for every 3& 5.0
Mtrs or Part there off.
RM 285.00
6 Supply & Installation of 1x18 W FTL lamp surface mounting light
fixtures for mirror
Nos 7.00
7 Supply & Installation of LED brackets holder lights
(Phillips)/Compact Nos. 25
8 Providing and fixing ceiling fan ( Philips/ Usha/ Crompton/ Bajaj)
incl. regulator
Nos 1.00
9 Providing and fixing 9 ” dia exhaust fan. ( Crompton/ Usha/ Bajaj) Nos 8.00
10 Providing and fixing wall mounted Fan 16"dia ( bajaj / crompton)
Nos 50.00
TOTAL
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 13 of 21
D Part IV. Telephone Wiring
1 Supplying, laying and connection of telephone points with 2 pair .51
sq.mm tinned Cu conductor through PVC casing ISI mark from
telephone point to Krone DB complete with RJ 11 telephone socket
modular type in PVC concealed box.
nos. 12.00
2 Do- 10 pair 0.51 sq.mm copper conductor telephone cable in 20
mm dia PVC pipe
RM 200.00
3 Supply, fixing and connection of 10 pair KRONE connector DB
complete with PVC moulded Telephone DB box with locking
system
set 1.00
4 Computer networking points with 4 pair, 24 AWG UTP Cat 6 Cable
as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in
PVC Conduits including making connections to Information outlets
and Patch Panels with ferruling at both ends for identification with
necessary tools for punching, stripping, crimpping and testing
required
nos. 65.00
TOTAL
E PART-V. DATA CABLE WIRING:
1 Supply & laying CAT 6 Data Cable with necessary accessories in laid
ridig conduits / Raceway from the sever room till The various
computer mades (Make - Dlink)
RM 520.00
2 Supply & installing CAT 6 Information outlet surfase box and
plate on individual table / work station (Make - Dlink)
Nos. 65.00
3 Removing and fixing 9U rack switch & modem connection at new
portition
Nos. 1.00
4 Supplying and fixing of 2 mtrs long factory crimped patch cord ( D
LINK make)
Nos. 65.00
5 Supplying and fixing of 1 mtrs long factory crimped patch cord ( D
LINK make)
Nos. 65.00
TOTAL
F SOUND SYSTEM IN CONFERENCE ROOM
Provision for Sound system with Table Top Conference Meeting
Microphone arrangement with USB points etc. complete as/ spec.
to be installed in future
1 Supply & laying CAT 6 Data Cable with necessary accessories in laid
rigid conduits / Raceway from the sever room till The various
computer mades (Make - Dlink)
RM 300.00
2 Supply & installing CAT 6 Information outlet surfase box and
plate on individual table / work station (Make - Dlink)
Nos. 2.00
3 Supply & fixing usb point complete. Nos. 15.00
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 14 of 21
4 Computer networking points with 4 pair, 24 AWG UTP Cat 6 Cable
as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in
PVC Conduits including making connections to Information outlets
and Patch Panels with ferruling at both ends for identification with
necessary tools for punching, stripping, crimpping and testing
required
nos. 15.00
5 Supply & installing speaker wire RM 90.00
6 Wiring to Primary plug outlets for computer points in PVC conduit
using 2 x 2.5 s.w.g. pvc Copper conductor wire, 1 x 1.5 sq.mm PVC
insulated running earth wire with approved make Control switches
terminating at Stabilizer/UPS location and including supplying &
fixing 1 No. 15 Amps switch with 3 Nos x 5 Amps plug socket with
plate and box connections etc as required. including cuircuit wiring
.( 1 cuircuit 1 looping)
RM 200.00
7 As Item No.1 but wiring to raw power plug points (5/15A ) ( 1
switch 1 socket set)
RM 50.00
8 Providing and fixing UPS point nos 5.00
9 - Do as above 6 sq.mm x 4 core flexible copper conducting wire
for UPS input/output.
RM 40.00
10 Supplying, laying and connection of telephone points with 2 pair .51
sq.mm tinned Cu conductor through PVC casing ISI mark from
telephone point to Krone DB complete with RJ 11 telephone socket
modular type in PVC concealed box.
nos. 2.00
11 Do- 10 pair 0.51 sq.mm copper conductor telephone cable in 20
mm dia PVC pipe
RM 40.00
12 Supply & fixing 6/16A power switch socket combine with indicator
complete with G.I. Switch mounding box of MK India
make. complete.
Nos. 2
TOTAL
SUMMARY:
A GENERAL ELECTRIFICATIONS
B COMPUTER WIRING (Thru’Stabilizer/UPS)
C FITTINGS & FIXTURES:
D TELEPHONE WIRING:
E DATA CABLE WIRING:
F SOUND SYSTEM IN CONFERENCE ROOM
GRAND TOTAL FOR ELECTRICAL WORKS
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 15 of 21
BOQ FOR AIR-CONDITIONING WORKS AT PROPOSED REGIONAL OFFICE, BANK OF BARODA,
SHAHJAHANPUR REGION AT SHAHJAHANPUR (U.P.)
QUANTITY & RATE ANALYSIS
S.No. DESCRIPTION UNIT QTY. Rates Amount
(Rs)
A (5 STAR rating /Inverter series) Supplying and installation of
Hiwall Type Split unit/Cassette with reciprocating/rotary
compressor. The units should be complete with evaporating unit,
condensing unit, controls, microprocessor control panel & a
cordless remote control. (DAIKIN/MITSUBISHI)
1 Casette A.C. of 2.0 TR (3HP) Nos. 2
2 1.5 TR Hiwall Split Unit Nos. 22
3 1.0 TR Hiwall Split Unit Nos. 1
TOTAL FOR HIGH SIDE WORKS
B LOW SIDE WORKS
Refrigerant piping, Power & Control Cabling, Drain piping and
MS stand
1 Stabilizers 4 kw make: as approved
(for input 110 volts & output 220 volt) Nos 25.00
2 Drain piping in hard PVC (Prince or Supreme make)with all
fittings, supports ,clamps and insulation with 9mm O class 32mm
Dia (to be measured beyond free piping provided by company)
mt 300.00
3 19 gauge Copper piping of adequate size duly insulated with 13
mm thk. O class Nitrile Rubber Insulation. For Hiwall Units
mt 350.00
4 Providing and fixing 10mm thick square bar M.S. fabricated
CAGE GRILLS / CAT WALK for Air-Conditioning out door with
Godrej lock to each a/c unit shutter as per sizes available
complete .
nos. 25.00
TOTAL FOR LOW SIDE WORKS
SUMMARY:
HIGH SIDE WORKS
LOW SIDE WORKS
GRAND TOTAL FOR AIR-CONDITIONING WORKS
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 16 of 21
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 17 of 21
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 18 of 21
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 19 of 21
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 20 of 21
----------------------------------------------------------------------------------------------------------------------------Tender Cum Prequalification of Contractors for Furnishing, Electrification/Computer Wiring/Telephone
Wiring/Data Cabling & Air-Conditioning Works Of Proposed Premises of Bank of Baroda, Regional Office at Shahjahanpur (U.P.)
Page 21 of 21