Sulfamic Acid 

Cleaner 

1

1. PRODUCT NAME Sulfamic Acid Cleaner 2. MANUFACTURER PROFLEX® Products, Inc. 1603 Grove Ave Haines City, FL 33844 Telephone: 863-937-9623 Toll Free: 877-577-6353 Fax: 863-937-9624 Internet: www.proflex.us 3. PRODUCT DESCRIPTION Sulfamic Acid Cleaner is a fast acting, mild acid cleaner for textured, non-polished, natural and manufactured surfaces. Sulfamic Acid Cleaner removes sanded grout & mortar residue, joint cement, lime & hard water deposits, efflorescence, rust and other heavy dirt and grime. Advantages ● Economical Formulation of Dry Granular Acid Crystals that are diluted with water to Match Cleaning Needs ● Highly effective on inorganic contaminants, especially on hard water deposits ● Very easy to use ● Non-Toxic, Non-Flammable. V.O.C. Compliant. Biodegradable. Usage Tile, Most Stones, Concrete, Masonry and Grout Surfaces. Removes Cement Grout Haze & Residue, Efflorescence, Ground-in Dirt & Soil, Mineral & Hard Water Deposits, Mortar Haze & Residue, Rust Stains, Sealer Residue, Soap Scum, and more. Can also be used to etch concrete. Suitable for both interior and exterior applications.

Packaging 1 lb. (PS59)

Coverage Approximately 350 to 600 sq. ft. per pound (31 to 55 square meters) depending on the type of surface, porosity, texture, temperature, method of application and dilution.

Dilution Ratio Mix 3/4 cup of Sulfamic Acid Cleaner to 1 gallon of water for use as a HEAVY-DUTY contaminants and stain cleaner. Mix 1/2 cup of Sulfamic Acid Cleaner to 1 gallon of water for use as a MEDIUM-DUTY contaminants and stain cleaner. Mix 1/4 cup Sulfamic Acid Cleaner to 1 gallon of water for use as a LIGHT-DUTY contaminants and stain cleaner.

Compliance and Handling

● Complies with all Federal, State and Local V.O.C. regulatory requirements. ● Use and store between 40ºF and 100ºF (4ºC and 38ºC). ● Store in original container only and close after each use. ● Shelf-life expected to be at least 1 year.

Limitations

● May etch, lighten, or alter the color of cement based surfaces, metal, natural stone (such as marble, limestone and other acid sensitive stones) and tile.

● Do not mix with ammoniated cleaners or bleach as harmful fumes may result. ● Prevent product from contacting surrounding surfaces such as carpet, glass, landscaping, metal, paint and wood.

Data Sheets are subject to change without notice. For latest revision, visit www.proflex.us 10252019

Sulfamic Acid 

Cleaner 

2

Warnings CORROSIVE. CAUSES BURNS. MAY BE HARMFUL IF SWALLOWED. MAY IRRITATE EYES AND SKIN. Wear skin and eye protection. If product gets in eyes, flush with water for at least 15 minutes. If product gets on skin, wash with soap and water. If irritation persists, seek medical attention. If swallowed, DO NOT induce vomiting, seek medical attention.

4. TECHNICAL DATA n/a 5. INSTALLATION Application

1. Sweep or vacuum surface to be cleaned to remove any loose contaminants. 2. Dissolve Sulfamic Acid Cleaner in water to match cleaning needs (see dilution ratio above). 3. Apply a liberal amount of water to the surface to be cleaned. Apply Sulfamic Acid Cleaner using a sponge, mop, or brush.

Expert tip: For large projects, divide working area into manageable sections of approximately 25 sq. ft. 4. Allow Sulfamic Acid Cleaner to dwell on surface for 1 to 5 minutes. 5. Agitate with a nylon scrub pad, brush, or other comparable non-marring scrubbing tool until contaminates or stain is

removed from surface. 6. Thoroughly rinse surface with water. A wet/dry vacuum may also be used. 7. Some surfaces may require additional applications. Expert tip: High pressure (1000 - 3000 psi) sprayers are highly

effective at rinsing away contaminants and stains when used in conjunction with Sulfamic Acid Cleaner. 8. Wipe surface completely dry using a clean, dry, white cotton or microfiber towel. 9. If surface is to be sealed, allow surface to dry 24 hours prior to applying a high quality PROFLEX® sealer.

6. AVAILABILITY Proflex Products are available nationwide. To locate Proflex products in your area, please contact: Phone: 877-577-6353 Website: www.proflex.us 7. WARRANTY Disclaimer/Warranties: Neither manufacturer nor seller have any knowledge or control concerning the purchaser’s use of the product. No expressed warranty is made by manufacturer or seller with respect to the results of any use of the product or container that the product comes in. No implied warranties including, but not limited to, an implied warranty of merchantability or an implied warranty of fitness for a particular purpose are made with respect to the product. User shall rely on his or her own information and tests to be determine suitability of the product for the intended use and user assumes all risk and liability resulting from use of the product. Neither manufacturer nor seller assume any liability for personal injury, loss or damage resulting from the use of the product. We do not suggest or guarantee that any hazards listed herein are the only ones which may exist. In event that the product shall prove defective, buyer’s exclusive remedy shall be that the seller or manufacturer shall, upon written request of buyer, replace any quantity of the product which is proven to be defective or shall, at its option, refund the purchase price of the product upon return of the product. Manufacturer shall not be responsible for use of this product in a manner to infringe on any patent held by others. 8. MAINTENANCE None required, but installation performance and durability may depend on properly maintaining products supplied by other manufacturers. 9. TECHNICAL SERVICES Technical assistance Information is available by calling the Technical Support Toll Free: 877-577-6353 Fax: 863-937-9624 Technical and safety literature: To acquire technical and safety literature, please visit our website www.proflex.us 10. FILING SYSTEM Division 9

Data Sheets are subject to change without notice. For latest revision, visit www.proflex.us 10252019