Suction Lift Pumps

Equipment PT18TP Suction Lift Pump

Application The PT18TP is capable of pumping 13,000 gallons per minute at 60 feet of head. Prime to depths of 30 feet and pass four and a half inch compressible solids with a portable Holland Suction Lift Trash Pump featuring technology. The standard 50 cfm water tolerant diaphragm vacuum pump equates to more than three times the compressor pump used by most competitors. Boasting indefinite run-dry capabilities, a Holland Suction Lift Trash Pump is ideal for various applications including sewage bypass and storm water removal. Job DescriptionWorking closely with Bill Blodgett (President of Holland Pump) and Holland Pump engineers, John Blanchette (Tampa Branch Manager) communicated the specifications Amry Tayebi and Bill Rogers at CF Industries required for an 18 inch pump. The men wanted a pump that could pump 10,000 gallons per minute at 100 feet of head. The Hardee Phosphate mine was in need of a large pump to keep up with the daily water level created by the drag lines that could also meet strict EPA requirements. After John delivered the Holland PT18TP, Amry was quoted as saying “Holland Pump not only met our expectations, they exceeded them”.

2610 Sidney Lanier Drive • Brunswick, Georgia 31525

1-800-451-0769 • Telephone (912) 466-0304 • Fax (912) 466-0086

www.hollandpump.com

7312 Westport Place, West Palm Beach, FL 334131-800-451-0769 • Telephone (561) 697-3333 • Fax (561) 683-7247

www.hollandpump.com

Application ReportHardee Phosphate Mine

EquipmentPT18TP Suction Lift Pump

ApplicationThe PT18TP is capable of pumping 13,000 gallons per minute at 60 feet of head. Prime to depths of 30 feet and pass four and a half inch compressible solids with a portable Holland Suction Lift Trash Pump featuring Prime 3 technology. The standard 50 cfm water tolerant diaphragm vacuum pump equates to more than three times the compressor pump used by most competitors. Boasting indefinite run-dry capabilities, a Holland Suction Lift Trash Pump is ideal for various applications including sewage bypass and storm water removal.

Job DescriptionWorking closely with Bill Blodgett (President of Holland Pump) and Holland Pump engineers, John Blanchette (Tampa Branch Manager) communicated the specifications Amry Tayebi and Bill Rogers at CF Industries required for an 18 inch pump. The men wanted a pump that could pump 10,000 gallons per minute at 100 feet of head. The Hardee Phosphate mine was in need of a large pump to keep up with the daily water level created by the drag lines that could also meet strict EPA requirements. After John delivered the Holland PT18TP, Amry was quoted as saying “Holland Pump not only met our expectations, they exceeded them”.

Suction Lift Pumps

Equipment PT18TP Suction Lift Pump

Application The PT18TP is capable of pumping 13,000 gallons per minute at 60 feet of head. Prime to depths of 30 feet and pass four and a half inch compressible solids with a portable Holland Suction Lift Trash Pump featuring technology. The standard 50 cfm water tolerant diaphragm vacuum pump equates to more than three times the compressor pump used by most competitors. Boasting indefinite run-dry capabilities, a Holland Suction Lift Trash Pump is ideal for various applications including sewage bypass and storm water removal. Job DescriptionWorking closely with Bill Blodgett (President of Holland Pump) and Holland Pump engineers, John Blanchette (Tampa Branch Manager) communicated the specifications Amry Tayebi and Bill Rogers at CF Industries required for an 18 inch pump. The men wanted a pump that could pump 10,000 gallons per minute at 100 feet of head. The Hardee Phosphate mine was in need of a large pump to keep up with the daily water level created by the drag lines that could also meet strict EPA requirements. After John delivered the Holland PT18TP, Amry was quoted as saying “Holland Pump not only met our expectations, they exceeded them”.

2610 Sidney Lanier Drive • Brunswick, Georgia 31525

1-800-451-0769 • Telephone (912) 466-0304 • Fax (912) 466-0086

www.hollandpump.com

Suction Lift Pumps

Equipment PT18TP Suction Lift Pump

Application The PT18TP is capable of pumping 13,000 gallons per minute at 60 feet of head. Prime to depths of 30 feet and pass four and a half inch compressible solids with a portable Holland Suction Lift Trash Pump featuring technology. The standard 50 cfm water tolerant diaphragm vacuum pump equates to more than three times the compressor pump used by most competitors. Boasting indefinite run-dry capabilities, a Holland Suction Lift Trash Pump is ideal for various applications including sewage bypass and storm water removal. Job DescriptionWorking closely with Bill Blodgett (President of Holland Pump) and Holland Pump engineers, John Blanchette (Tampa Branch Manager) communicated the specifications Amry Tayebi and Bill Rogers at CF Industries required for an 18 inch pump. The men wanted a pump that could pump 10,000 gallons per minute at 100 feet of head. The Hardee Phosphate mine was in need of a large pump to keep up with the daily water level created by the drag lines that could also meet strict EPA requirements. After John delivered the Holland PT18TP, Amry was quoted as saying “Holland Pump not only met our expectations, they exceeded them”.

2610 Sidney Lanier Drive • Brunswick, Georgia 31525

1-800-451-0769 • Telephone (912) 466-0304 • Fax (912) 466-0086

www.hollandpump.com