Subordinate New Brand Smart LED Control - Futlight
2
Dynamic Mode Saturation Brightness &Speed Adjustable Unadjustable Unadjustable Seven color gradual change White light Gradual change RGB gradual change Seven color jump to change Jump to change randomly Red light gradual change+Flash 3times Green light gradual change+Flash 3times Blue light gradual change+Flash 3times White light gradual change+Flash 3times 1 2 3 4 5 6 7 8 9 Adjustable Adjustable Number Dynamic Mode Sheet Auto-transmitting function One strip controller can transmit the signals from the remote control to another controller within 30m, as long as there is a strip controller within 30m, the remote control distance can be limitless. Controller Controller Controller Controller Controller Controller Controller Different controllers can work synchronously when they are started at different times, controlled by the same remote, under same dynamic mode and with same speed, and within 30m distance. Auto-synchronization function This controller adopt the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting and strong anti-interference, etc. Also with smart phone control and 4G long distance control(2.4GHz gateway is needed). The controller has auto-transmitting and auto-synchronizing function and with RGB,RGBW and RGB+CCT output mode. Widely used on the controlling of hotel lighting and home lighting. Introduction Model No.: FUT043 / FUT044 / FUT045 Smart LED Control Model No.: FUT043 / FUT044 / FUT045 Working Voltage: DC12V~24V Output Max: 6A/Channel Total Output Max: 15A Working Temperature: -20~60°C RF: 2.4GHz Max Controlling Distance: 30m Output Connection: Common anode Size: 37*28*97mm Technical Data 28mm 37mm 97mm Auto-transmitting Auto-transmitting Distance 30m Distance 30m Remote Subordinate New Brand
Transcript of Subordinate New Brand Smart LED Control - Futlight
Dynamic Mode SaturationBrightness&Speed
Adjustable
Unadjustable
Unadjustable
Seven color gradual change
White light Gradual change
RGB gradual change
Seven color jump to change
Jump to change randomly
Red light gradual change+Flash 3times
Green light gradual change+Flash 3times
Blue light gradual change+Flash 3times
White light gradual change+Flash 3times
1
2
3
4
5
6
7
8
9
Adjustable Adjustable
Number
Dynamic Mode Sheet
Auto-transmitting functionOne strip controller can transmit the signals from the remote control to another controller within 30m, as long as there is a strip controller within 30m, the remote control distance can be limitless.
Controller
Controller
Controller
Controller
Controller
Controller Controller
Different controllers can work synchronously when they are started at different times, controlled by the same remote, under same dynamic mode and with same speed, and within 30m distance.
Auto-synchronization function
This controller adopt the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting and strong anti-interference, etc. Also with smart phone control and 4G long distance control(2.4GHz gateway is needed). The controller has auto-transmitting and auto-synchronizing function and with RGB,RGBW and RGB+CCT output mode. Widely used on the controlling of hotel lighting and home lighting.
Introduction
Model No.: FUT043 / FUT044 / FUT045
Smart LED Control
Model No.: FUT043 / FUT044 / FUT045Working Voltage: DC12V~24VOutput Max: 6A/ChannelTotal Output Max: 15AWorking Temperature: -20~60°CRF: 2.4GHzMax Controlling Distance: 30mOutput Connection: Common anodeSize: 37*28*97mm
Technical Data
28mm37mm
97mm
Auto-transmittingAuto-transmitting
Distance 30mDistance 30m
Remote
Subordinate New Brand
Controller connect to RGB LED strip diagram
R G B
V+
INP
UT
V+
RG
B
OU
TPU
TRGB LED Strip ControllerModel No.: FUT043Input voltage: DC12V~24VOutput: 6A/ChannelTotal output Max: 15AWorking temp.: -20~60°C
Subordinate New Brand
RF: 2.4GHzControlling distance: 30mMade in China
Controller connect to RGBW LED strip diagram
R G B W
V+
INP
UT
V+
RG
BW
OU
TPU
TRGBW LED Strip ControllerModel No.: FUT044Input voltage: DC12V~24VOutput: 6A/ChannelTotal output Max: 15AWorking temp.: -20~60°C
Subordinate New Brand
RF: 2.4GHzControlling distance: 30mMade in China
Controller connect to RGB+CCT LED strip diagram
R G B CW WW
V+
INP
UT
V+
RG
BC
W
OU
TPU
TW
W
RGB+CCT LED Strip ControllerModel No.: FUT045Input voltage: DC12V~24VOutput: 6A/ChannelTotal output Max: 15AWorking temp.: -20~60°C
Subordinate New Brand
RF: 2.4GHzControlling distance: 30mMade in China
Attention1. Please check whether the input voltage of the constant voltage power supply is in
accordance with the controller, and please check the connection of both the cathode and anode, otherwise the controller will be broken.
2. Please don’t connect wires with power on. Please turn on again only when it is in right connection and no short circuit.
3. Please do not use the controller in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected .
Controller connect to LED strip diagram
DC12V/24V
AC TO DC
DC12V/24V
AC TO DC
DC12V/24V
AC TO DC
Compatible with these remote controls (Purchased separately)
Link/Unlink
Lighting can be working after linking with remote; for more details, pls read the remote instruction.
FUT089 FUT088 FUT092 B8 B0 B4 / T4
Made in China
