Sub Frame - mbsales.com.au · trim fit final frames and doors. Timber joinery doors and frames have...
1
Sub Frame innovative solution for the perfect door system Clip on ‘brick ties’ supplied with M&B SubFrame Once brick work is dry, timber braces can be removed [sawn] to allow for easy access. M&B SubFrame is an inexpensive solution to a potentially costly problem. Quick & simple to install. M&B SubFrame is “bricked in” to ensure opening is true & square to fit final frames and doors. Provides an accurate straight edge for the plasterer to return render to. MBSFR10713 BAYSWATER 144 Beechboro Rd South 9272 2555 SUBIACO Home Base Expo 55 Salvado Rd 6380 6000 MANDURAH 25 Hampton St 9583 8000 BUSSELTON 9 Trumper Dve 9752 7900 BUNBURY 50 McCombe Rd 9724 8900 ALBANY 18 Merrifield St 9844 5200 GERALDTON 315 Place Rd 9960 5000 www.mbsales.com.au [email protected] Minimise the risk of damage to your timber door frames during construction. An M&B Sub Frame will ensure the frame opening is true and square, designed to trim fit final frames and doors. Timber joinery doors and frames have increased in popularity in Western Australia over the past few years. M&B has recognised this trend and the need for WA builders to protect “High Value” premium doors and frames. The M&B Sub Frame offers a “Hassle Free” solution. By using an M&B SubFrame you will avoid exposing the Door Frame to “on site” damage during the construction process. Plus installation of frames, doors & hardware can now be completed at the same time prior to handover. Installing an M&B SubFrame offers the following benefits: aluminium subframe + temporary pine braces + clip on aluminium brick ties Timber Wind Mould Aluminium SubFrame Timber Door Frame 10mm lip for exterior render (if required) Brick es SubFrames are manufactured to required opening size. Larger sizes are available to suit special size doors, pivots, bi-folds and stacking door systems. M&B can professionally install FRAMES, DOORS & HARDWARE in to your sub-frame opening. M&B SubFrame is bricked in so you are left with a clean, flush opening. Quick & simple to install. Minimises the risk of site damage to door frames during construction. Joinery frames will not be exposed to weathering during construction. Minimise the risk of potential site theft [frames]. Provides an accurate straight edge for the plasterer to return plaster/render to. Allows for quick and timely lock up. Installing a SubFrame will ensure a perfect operational door system. Can be used for all external door systems – bi-fold, stacking, pivot & swing doors. Suitable for render or face brick finish. M&B SubFrame is an inexpensive solution to a potentially costly problem.
Transcript of Sub Frame - mbsales.com.au · trim fit final frames and doors. Timber joinery doors and frames have...
Sub Frameinnovative solution for the perfect door system
Clip on ‘brick ties’ supplied with M&B SubFrame
Once brick work is dry, timber braces can be removed [sawn] to allow for easy access.
M&B SubFrame is an inexpensive solution to a potentially costly problem.
Quick & simple to install. M&B SubFrame is “bricked in” to ensure opening is true & square to fit final frames and doors.
Provides an accurate straight edge for the plasterer to return render to.
MB
SFR
10713
BAYSWATER 144 Beechboro Rd South 9272 2555 SUBIACO Home Base Expo 55 Salvado Rd 6380 6000 MANDURAH 25 Hampton St 9583 8000 BUSSELTON 9 Trumper Dve 9752 7900
BUNBURY 50 McCombe Rd 9724 8900 ALBANY 18 Merrifield St 9844 5200 GERALDTON 315 Place Rd 9960 5000
www.mbsales.com.au [email protected]
Minimise the risk of damage to your timber door frames during construction.An M&B Sub Frame will ensure the frame opening is true and square, designed to trim fit final frames and doors.
Timber joinery doors and frames have increased in popularity in Western Australia over the past few years. M&B has recognised this trend and the need for WA builders to protect “High Value” premium doors and frames. The M&B Sub Frame offers a “Hassle Free” solution.
By using an M&B SubFrame you will avoid exposing the Door Frame to “on site” damage during the construction process. Plus installation of frames, doors & hardware can now be completed at the same time prior to handover.
Installing an M&B SubFrame offers the following benefits:
aluminium subframe + temporary pine braces + clip on aluminium brick ties
Timber Wind Mould
Aluminium SubFrame
Timber Door Frame
10mm lip for exterior render (if required)
Brick ties
SubFrames are manufactured to required opening size. Larger sizes are available to suit special size doors, pivots, bi-folds and stacking door systems.
M&B can professionally install FRAMES, DOORS & HARDWARE in to your sub-frame opening.
M&B SubFrame is bricked in so you are left with a clean, flush opening.
Quick & simple to install.
Minimises the risk of site damage to door frames during construction.
Joinery frames will not be exposed to weathering during construction.
Minimise the risk of potential site theft [frames].
Provides an accurate straight edge for the plasterer to return plaster/render to.
Allows for quick and timely lock up.
Installing a SubFrame will ensure a perfect operational door system.
Can be used for all external door systems – bi-fold, stacking, pivot & swing doors.
Suitable for render or face brick finish.
M&B SubFrame is an inexpensive solution to a potentially costly problem.
