Stylmark, Inc. - Inside Aluminiuminsidealuminium.com/brochures/Hardware.pdf · Stylmark provides a...
Transcript of Stylmark, Inc. - Inside Aluminiuminsidealuminium.com/brochures/Hardware.pdf · Stylmark provides a...
Hardw are and accessories
Part #971650 Rev. A
Stylmark, Inc.6536 Main Street NE, PO Box 32008Minneapolis, MN [email protected]
www.stylmark.com
34678_HardwareBrochure_COVER_CS5.indd 1 2/10/11 7:21 PM
Hardware & Accessories
Curving 2
Angles 3
Bracket Hardware 5
Channels 6
Flat Bars and Inserts 8
Locks/Latches 10
Pulls 11
Rolling Door Components 12
Shelf Standards and Brackets 16
Tees 19
Tubes - Round, Square & Rectangular 19
Miscellaneous 20
Assure that your installations and designs are
completed in professional fashion by utilizing
Stylmark’s Hardware and Accessories. This catalog
represents a collection of these items, which can also be
found throughout the pages of our product catalogs in various
applications. Don’t accept anything less than Stylmark quality
when choosing or replacing these items.
34678_HardwareBrochure_CS5.indd 1 2/8/11 3:45 PM
2 Stylmark Hardware and Accessories
Curving
(IR)
(IR)
(S)
CHORD (C)
(α)
(L)
EXAMPLE
Bring it all together with a few carefully placed curves. Stylmark is able to curve virtually all of our products to meet your radius requirements. Simply provide us with dimensions as indicated below and watch your design come to life!
Required Information: • Radius (IR) •ArcLength(S) •Chord(c)orIncludedAngle(α) •StraightLength(L)
Notes: • Provide AutoCAD® or SolidWorks drawing if available
1/16”
1/16”
1/8”1/16”1/16”1/8”
1/2“
3/4”
1 1/2”1”1”2”
ATHICKNESS
1/2”
1/2”1 1/2”
ALENGTH
3/4“
1/16”
1/16”
1/8”1/16”1/16”
1/8”
110030
110159110150
PART #
110034
110165110167
1”2”
1/16” 7/8”3/8” 1/8”110090
1/8” 1 1/2” 1/8”110168 3/4“
1/16” 5/8” 1/16”110180 7/16”
1/16” 1 1/4” 1/16”110182 3/8”
1/16” 2 1/2” 1/16”110293 1”
1/8” 1 1/2” 1/8”110306 1 1/2”
1/16” 7/8” 1/16”110451 7/8”
1 17/32”110728 9/16”
BLENGTH
BTHICKNESS
120062 17/32” 1/16” 7/8” 1/8”
120059 5/16” 3/64” 5/8” 3/64”
1/16” 1/16”
110737 1/16”1/4” 1”1/16”
34678_HardwareBrochure_CS5.indd 2 2/8/11 3:45 PM
www.insidealuminium.com
Stylmark Hardware and Accessories 3
Flexible•Collaborative•Transformative•Solutions
Angles
√ = finished surfaceDrawings are not actual size
B - LengthB - Thickness
A - Length
A - Thickness
Part # 110030
Part # 110150
Part # 110034 Part # 110090
√
√√
√ √
√
√
√
√
√
Part # 110159 Part # 110165
ATHICKNESS
ALENGTH
110159110150
PART #
110034
BLENGTH
BTHICKNESS
120062
110737
√
34678_HardwareBrochure_CS5.indd 3 2/8/11 3:45 PM
unit: mm
110030 12.712.7 1.61.6
1.6
19.1 19.1 1.6110090 9.5 1.6 22.2 3.2
38.1 3.2 38.1 3.21.6 25.4 1.612.7
1.6 25.4110165 25.4 1.6
3.250.83.2110167 50.8
3.238.13.2110168 19.11.6110180 1.6 15.911.1
1.61.6 31.8110182 9.5
1.6110293 25.4 1.6 63.5
3.238.13.2110306 38.1
110451 1.622.21.622.21.61.6110728 38.914.3
1.625.41.66.4
1.21.2120059 7.9
3.222.21.613.5
1.6
12.7
1.6
12.7
1.6
1.6
1.619.1
19.1
9.5 3.2
22.2
3.2
3.2
1.6
1.6
1.6
1.6
38.1
38.1
12.7
25.4
25.4
25.4
0044 (0) 1903 893992
15.9
4 Stylmark Hardware and Accessories
Angles
√ = finished surfaceDrawings are not to scale
Part # 110167 Part # 110168 Part # 110180
√
√
√
√
√
√Part # 120059
√
√
Part # 110451
√
√
√
√√
√
√
135º
Part # 120062
√
135º√
√√
√
√
√
34678_HardwareBrochure_CS5.indd 4 2/8/11 3:45 PM
3.23.2
3.23.2
50.8
50.8
19.1
38.1
1.6
1.6
11.1
15.9
3.2
3.2
1.6
1.625.4
63.5
38.1
38.1
1.6
1.6
31.8
9.5
1.6
1.6
1.6
22.2
22.238.9
25.4
6.41.6
1.6
1.6
3.213.5
22.2
1.2
1.27.9
15.9
www.insidealuminium.com
14.3
Part # 110182 Part # 110293 Part # 110306
Part # 110728 Part # 110737
Stylmark Hardware and Accessories 5
Flexible•Collaborative•Transformative•Solutions
Bracket Hardware
Steel Miter Bracket for Reflector ShellsPart # 510126
For 90° shellPart # 510127For 135° shell
Part # 510089Steel Mounting Bracket
AssemblyDesigned for mounting #110107 and 110192 to wood end of a showcase or cabinet. Includes
two brackets and screws.
Part # 510238Steel Miter Bracket and ScrewsDesigned to discreetly secure 90˚miteredcornersforextru-
sion #110153. Assembly #510248 works with extrusion #110196.
Part # 510246Steel Wedge Bracket AssemblyUsedtosecure90˚miteredcor-ners for Part #s 110198, 110300, 110403. Includes four brackets,
backplates, and screws.
Part # 520005Bracket Assembly for Mirror Frames
Drawings are not to scale
Part # 570013Pivot Hinge Assembly
Gravity hinge for door panels not exceeding 35 pounds. Brass plated.
Part # 570003 Leveler Assembly
Used to assure easy adjustability.
Part # 570004Angle Bracket
Used to attach panels to posts. Anodized to
match.
34678_HardwareBrochure_CS5.indd 5 2/8/11 3:45 PM
9.5
19.1
12.7
127
127
22.4
38.1
12.7
25.4
25.4
7.1 63.5
63.5
7.17.1
63.5
63.5
0044 (0) 1903 893992
6 Stylmark Hardware and Accessories
Channels
√ = finished surfaceDrawings are not to scale
B
A
Thickness
Part # 110022
√
Part # 110023
√
Part # 110024Edge Molding
√
Part # 110026Edge Molding
√
Part # 110080
√
Part # 110162
-
BAPART #
- -
THICKNESS
√
√
√
34678_HardwareBrochure_CS5.indd 6 2/8/11 3:45 PM
1.6
1.6
1.6
110358
- 3.2
110360
3.2
3.2
1.6
110022
110023
110024110026110080110162110251110315
110359
110413 19.1 -
9.5 -
1.2
14.3 15.915.9
1.620.6
9.5 11.111.114.3
25.419.1
19.11.67.97.9
38.1
3.2 50.8 31.8 50.8
3.2
30.2
25.4 50.8110361 25.4 25.4
101.6 50.8
14.3 1.6
42.9 1.6- 1.6
14.3 Single Channel
14.3
1.6
15.9
20.6 Single Channel
20.6
1.6
15.9
1.6
9.5
14.31.6
25.4
19.119.1
Top U Channel 30.2 Top Channel
30.2
1.2
11.1
11.1
www.insidealuminium.com
25.4170008 31.8
110461 25.4
110577 12.7
110650 12.7
110683 19.1
110691 6.4
Stylmark Hardware and Accessories 7
Flexible•Collaborative•Transformative•Solutions
ChannelsPart # 110315*
for Curving
Part # 110359 Part # 110360
Part # 110461
Part # 110361√
√
√
Part # 110358Anchor Channel
√ √
Part # 110413
√√√
√
√
√
√
√
√
Part # 110577
√
√
PART #110153HEAVY DUTY MOLDING
PART #1106503/8" GLASS CHANNEL
Part # 110650
√
√
Part # 170008Wall Jamb
√
√
Part # 110251
√
Part # 110691 Part # 110683*
√
√
√
•*Part#110315stockisspecialorder.
√ = finished surfaceDrawings are not to scale
34678_HardwareBrochure_CS5.indd 7 2/8/11 3:45 PM
7.9
7.9
1.6
1.6
3.2
3.2
3.2
Shoe Filler 38.1 Front Frame
38.1
6.4
19.1
19.1
19.1
12.7
50.8
31.8
25.4
50.8
25.4
50.8
Top Channel with Legs 50.8 x 25.4 Top Channel 25.4 x25.4 Bottom Channel
3.2
25.4
25.4
19.1 x 101.6 Channel
101.6
25.4 x 50.8 Channel
3.2
25.4
50.8
1.6
12.7
9.5
Showcase Molding 9.5 Glass Channel
1.6
12.7
14.3
19.1 x 38.1 Channel Channel W/Legs
1.63.2
1.6
1.6
19.1
42.9
28.625.4
31.8
Notes: •*Part#110683stocklengthis3048.
0044 (0) 1903 893992
6.4
8 Stylmark Hardware and Accessories
Flat Bars and Inserts
√ = finished surfaceDrawings are not to scale
A
B
Part # 110050 Part # 110051
Part # 110099
√
√
Part # 110166
√
Part # 110171
√
Part # 110194
√
Part # 110229 *Part # 110305 Part # 110391√√√
√
√ √
√
√
√
BA
110166
PART #
110051
110709
110787110788110810110818
34678_HardwareBrochure_CS5.indd 8 2/8/11 3:45 PM
110050
12.725.4 12.750.8
110099 19.1 1.625.4 3.2
110171 31.8 2.4110194 27.0 6.4110229 88.9 3.2110305 177.8 1.8110391
110398
3.2
3.23.2110419
110538 3.2110655 165.1 6.4110665 6.412.7
110693 12.7 4.8
12.7
38.1
79.4 2.43.26.46.4
6.46.4
19.1
34.1
3.2
25.4
12.7 12.7
50.8
1.6 3.2
25.419.1
2.419.1
3.26.4
31.8
27.0
3.2
150012
3.2
88.9 177.8
1.8
11.1
11.1
11.1
www.insidealuminium.com
76.2
42.1
Stylmark Hardware and Accessories 9
Flexible•Collaborative•Transformative•Solutions
Flat Bars and Inserts
√ = finished surfaceDrawings are not to scale
Part # 110398 Part # 110419 Part # 110538
Part # 119006Vinyl track insert
works with #110035
Part # 150012
√√
*Part # 110655
√
Part # 110665 Part # 110693
√
√Part # 110709
√
√√
√
√
√
√
•*Part#110787isspecialorderonly.
√
√
Part # 110787*
√√
√
Part # 110788
√
√
√√
√
Part # 110810
Part # 110818
√
√
√
√√
√
√
34678_HardwareBrochure_CS5.indd 9 2/8/11 3:45 PM
3.2 6.4 6.4
6.419.1
38.1
3.23.2 3.2 6.4
76.242.1 165.1
34.1
6.4
12.7 12.7 12.7
4.8
3.2
6.4
1.3 2.0
7.1
79.4
2.4
Notes: •*Part#110305stocklengthis2438.4. •*Part#110655stocklengthis3048.
0044 (0) 1903 893992
11.1
10 Stylmark Hardware and Accessories
Locks and LatchesStylmark provides a Kenstan K-41 chrome finish lock as a standard component. Stylmark provides fabrication for Best lock 2S & 4S series. Stylmark shoe #110350 (see page 15) is designed to accommodate the Best 4S series lock. Best Locks not supplied by Stylmark.
Part # 510187Chrome T-Bolt Lock
The Kenstan K-45 is typically used with our security by-pass door system.
Part # 510199Chrome Cam Lock
Kenstan K-13 lock can be used with #110153 hinged
door frame extrusion. One key available.
Part # 511040Chrome Plunger Lock
Small profile lock installs in the #110012 and #110067 shoes. Six
key types are available.
Part # 510808Lock
The Kenstan K-41 showcase lock installs in the #110140, 110350, and
110412 shoes. Five key types are available. The key stays in lock in
open position.
Part # 510249Offset Cam Lock
Use with showcase frame #710000 series, top or bottom
hinged door.
Part # 510245Push Latch
This magnetic push latch is an alternate to the
#510349 latch.
Part # 510269‘L’ Cam Lock
For use with showcase frame #710000 series, side-hinged door.
Part # 510349Push Latch
This mechanical push latch is used with hinged door or transparency frames.
34678_HardwareBrochure_CS5.indd 10 2/8/11 3:45 PM
www.insidealuminium.com
Stylmark Hardware and Accessories 11
Flexible•Collaborative•Transformative•Solutions
Pulls
√ = finished surfaceDrawings are not to scale
any length. Many styles are available in pre-cut sizes—edges on these are finished because they’re
Fabricated 4˚SlantTopPullfor
Drawer Pull with Label Holder
Part # 410114:
√
√
√
√ √
√
Pre-Fabricated Edge Pull
accept #119000 series glazing vinyl.
√
√
Pre-Fabricated Edge Pull
#119000 series glazing vinyl.
√
√
√
Part # 510016: Finger pull kit comes with two pulls, one bum-per, and screws. A bumper prevents the pull from striking the opposite door. Available in
satin natural and satin black finishes.
Part # 110531: 12’
√ √
Part # 110069: 12’
√
√
Can be easily and securely installed into a groove on the edge of a
panel.
√
Notes: *Part #110531 is special order.
√
√
√
√
√
√
34678_HardwareBrochure_CS5.indd 11 2/8/11 3:45 PM
includes two counter sunk holes for easy installation.
Part # 410101: 95.3mm Pre-
anodized after fabrication. A cut size of 95.3mm
Part # 410103: 95.3mm Pre-Fabricated
4˚SlantTopPullfor19.1mmDrawer 4˚SlopePullfor19.1mmDrawer20.6mm Drawer
19.1 20.6 19.1
57.2 57.2 57.2
Part # 410123: 95.3mm Pre-Fabricated Part # 410001: 69.9mm Part # 410002: 69.9mm
for use with 6.4mm panels that accept for use with 6.4mm panels that
57.2
18.3
20.6
9.5
31.827.0 14.3
34.9
22.2
11.1 11.1
11.1 11.1
Stylmark’s door and drawer pulls are available in 3.7 meter stock lengths that can be fabricated to
Part # 110104: 3.7m Part # 110105: 3.7m Part # 110108: 3.7m
Part # 110028: 3.7m Part # 110069: 3.7m *Part # 110531: 3.7m
95.3mm Pre-Fabricated
30.2
Part # 110258: 3.7m
0044 (0) 1903 893992
Part # 110111: 3.7m Part # 110027: 3.7m Part # 110029: 3.7m
12 Stylmark Hardware and Accessories
Notes: • *These parts do not include a mechanical finish.
Rolling Door ComponentsBottom Tracks
Part # 110019*Double Track
Part # 110021*Glide Track
Part # 110035Slide Track
Part # 110063Double Channel Track
Part # 110072Slide Track
Part # 110078Channel Track
Part # 110079*Wood Door Track
Part # 110178Security Track
Part # 110009*Drop-In Track
√ √
Part # 110208Security Track
√
= finished surfaceDrawings are not to scale
√
√
√
√
√
34678_HardwareBrochure_CS5.indd 12 2/10/11 4:05 PM
12.7
11.9
30.230.2
30.230.2
30.2 30.2
7.1 7.1
7.16.4
19.1
11.1
11.1
12.712.7
25.4
12.7
57.2
www.insidealuminium.com
Stylmark Hardware and Accessories 13
Flexible•Collaborative•Transformative•Solutions
Notes: •*Part#110343isspecialorderonly.
Rolling Door ComponentsBumpers
Adhesive-Backed Bumpers
Part # 221014 GrayPart # 221015 Clear
Part # 510006: Standard Door Bumper AssemblyNeoprene bumper with screw and nut attaches to rear of front door to prevent extruded pulls from striking door. Can also be used with flush pulls or finger pulls that are ground into glass doors to prevent pinched finger.
Heavy Duty Door Stop Assemblies
Neoprene stops have two screws. They attach to the bottom or top opening channels when installing three or more doors on two tracks.
Part # 110102
Part # 110372 Part # 110523
√
√
√
√
√
Part # 110071
√
√
√
√
Part # 110343*
√ √
Track Headers
Part # 110007 Part # 110008 Part # 110036 Part # 110064
√ = finished surfaceDrawings are not to scale
√
√
34678_HardwareBrochure_CS5.indd 13 2/8/11 3:46 PM
30.230.2 30.2
12.7 Diameter, 4.0 High
510014: 12.7 x 31.8 x 12.7, installs in #110007
14.3 14.3
14.3
14.3
19.1
45.245.2
34.1
34.1
34.9
3 4.9
34.9
31.8
28.6
12.7
0044 (0) 1903 893992
510015: 12.7 x 31.8 x 19.1, installs in #110008
20.6 20.6
14 Stylmark Hardware and Accessories
Rolling Door ComponentsDoor Accessories
Part # 222012 Rivet
a semi-tubular oval head. Use to fasten #419030 guide to
#110024 door top.
Part # 410444 Door Retainer
Stakes into bottom shoe to provide anti-jump operation.
Shipped two per door. Use with #110012 shoe only.
Part # 410454 Retainer
Inserted into wood panel to pro-vide anti-jump. Shipped two per
door. Use with #510041 wheel and #110208 track only.
Part # 410381 Door Retainer
Stakes into bottom shoe to provide anti-jump operation.
Shipped two per door. Use with #110140, 110350, or 110412 shoe.
Part # 419007Top Silencing Guide
Black vinyl guide snaps on top of
Part # 419030Top Guide
Rivets to extrusion #110024 at door top.
Drawings are not to scale
34678_HardwareBrochure_CS5.indd 14 2/8/11 3:46 PM
Rivet is 3.2mm in diameter with
a 4.8 - 6.4 thick door panel.
www.insidealuminium.com
Stylmark Hardware and Accessories 15
Rolling Door ComponentsShoes
Part # 110012 Part # 110014 Part # 110066 Part # 110067
Part # 110076 Part # 110350 Part # 110412
√
√
√
√
√
√
√ √
√
√ √
Endcap Assemblies
Cap Shoe
510241 110140 510331 110350 510371 110412
√
√
Wheels
Part # 510001Standard Wheel Assembly (W1)
Part # 510041Heavy Duty Wheel Assembly (W5)
#110067, 110140, 110350, and 110412 shoes
= finished surfaceDrawings are not to scale
19°
35°
34678_HardwareBrochure_CS5.indd 15 2/8/11 3:46 PM
11.1 11.1
Flexible•Collaborative•Transformative•Solutions
11.1
11.1
Part # 110140
11.1 11.1
25.4 15.1
10.3
10.3
26.2
17.5
20.6
28.6
29.4
7.1
30.2
34.138.1 47.6 58.7
Use with doors to 22.7 kg Press fits in #110012 shoe or 6.4 wide by 15.9 deep groove.
Wheel diameter is 14.3.Wheel housing is 19.1 x 14.3 x 6.4.
Use with doors to 36.3 kg Press fits in
or 6.4 wide by 20.6 deep groove. Wheel diameter is 15.1.
Wheel housing is 22.2 x 19.1 x 6.4.
0044 (0) 1903 893992
16 Stylmark Hardware and Accessories
Shelf Standards and BracketsAluminum Light Duty Standards and BracketsStylmark aluminum light duty standards and brackets are anodized to the same color and finish as other showcase components. They can also be ordered in complementary colors for contrast.
Part # 450010*
Has slotting for conventional brackets. Slots measure
Part # 450022*
This insert for #450010 adds support and gives the standard
Part # 550007
Used to fasten a standard at the top and bottom of the
Part # 450013* Wall Standard
Used for designs requir-ing wall mounted stan-dards. Comes with pre-drilled and countersunk holes every six inches.
Part # 550006: Shelf BracketThis aluminum shelf bracket is typically used with
Part #550006 - with lip
Part #550006 - without lip
Steel Shelf ClipsThese shelf clips are designed with rubber grommets to
cushion the glass resting on our shelf brackets.Available in chrome finish only.
Part #550013: End Clip Part #550014: Center Clip
Notes:or fabricated to length
34678_HardwareBrochure_CS5.indd 16 2/8/11 3:46 PM
14.3 x 2.4, and are 25.4 on center. a finished look. showcase. Gray plastic.
Showcase Standard Showcase Standard Support Foot and Cap Assembly
12.7
15.92.8
6.4 glass shelving. It is available in 152.4, 203.2, 254, 304.8, 355.6, and 406.4 depths, with or without a lip.
12.7
15.9
www.insidealuminium.com
•*Partnumbers#450010,450022and450013canbeorderedas3.7mstocklength
Stylmark Hardware and Accessories 17
Flexible•Collaborative•Transformative•Solutions
Shelf Standards and BracketsAluminum Heavy Duty Standards and BracketsStylmark’s heavy duty aluminum standards with tubular brackets are as durable as steel showcase standards and brackets, but offer the added feature of color and finish options.
Part # 450020* Heavy Duty Standard
This standard is machined at the top and bottom to accept the #550007 foot and cap
Part # 450021*Standard Insert
This insert for #450020 adds support and gives the stan-
Part # 550007Foot and Cap AssemblyUsed to fasten a standard at the top and bottom of
the showcase. Gray plastic.
Part # 550010Heavy Duty Tubular Bracket
Our heavy duty tubular bracket adds a contemporary look with the ability of sup-
Steel Shelf ClipsThese shelf clips are designed with rubber grommets to cushion the glass resting on our tubular brackets.
Available in chrome finish only.Part #550011: End Clip Part #550012: Center Clip
Notes:or fabricated to length
34678_HardwareBrochure_CS5.indd 17 2/8/11 3:46 PM
assembly. Slots measure 14.3 x 2.4, dard a finished look. and are 25.4 on center.
12.7
19.1
porting 9.5 to 12.7 thick glass shelves with
304.8, 355.6, and 406.4 depths.
0044 (0) 1903 893992
ease. It is available in 152.4, 203.2, 254,
•*Partnumbers#450020and450021canbeorderedas3.7mstocklength
18 Stylmark Hardware and Accessories
Shelf Standards and BracketsSteel Standards and BracketsWhen your design requires extra strength, these Knape and Vogt (K.V.) steel standards and brackets provide the support you need. These components have an anachrome finish and are not compatible with aluminum standards or brackets.
Steel Standard
K.V. steel showcase standards have slotting for conventional brackets.
Part # 550009
Attaches standard at top of showcase.
Part # 550008Foot Assembly
Attaches standard at bottom of showcase.
BracketsK.V. steel brackets are available in six sizes:
34678_HardwareBrochure_CS5.indd 18 2/8/11 3:46 PM
Part # 232023: 914.4 Cap AssemblyPart # 232028: 2438.4
10.3
15.9
Part # 232006 152.4Part # 232008 203.2Part # 232010 254Part # 232012 304.8Part # 232014 355.6Part # 232016 406.4
www.insidealuminium.com
Stylmark Hardware and Accessories 19
Flexible•Collaborative•Transformative•Solutions
√ = finished surfaceDrawings are not to scale
Tubes - Round
Tubes - Square & Rectangular
ThicknessDiameter
Part # 110113
√
√
√Part # 110117*
√
√
Part # 110114
√
√
√
Part # 110160
√√
Part # 110573
√
√
TeesPart # 110018 Part # 110065 Part # 110093
Part # 110298 Part # 150014
√
√
Part # 150015
√
√
√ √√
•*Part#110117isspecialorderonly.
√
√
√
THICKNESSDIAMETERPART #
110423SOLID110706
Part # 110731
√
√
√
34678_HardwareBrochure_CS5.indd 19 2/8/11 3:46 PM
26.6
1.6
20.6
20.612.7
1.22.07.9 9.5
3.225.4
38.1 38.1
2.4
2.419.1
92.1
110087
1.212.7
12.7 1.2110263 2.4101.6110348 1.223.0110370 SOLID23.0
28.6
25.4
25.4
6.4
12.7 25.4
25.4
Part # 110705*
6.4
12.7 25.4
25.4
63.5
44.5 14.3
9.5
19.1 19.1
15.9 41.3
Notes: •*Part#110705stocklengthis2.44m.
0044 (0) 1903 893992
20 Stylmark Hardware and Accessories
Miscellaneous
√ = finished surfaceDrawings are not to scale
Part # 110107Front Frame
√Part # 110127
Top Front Frame
√
Part # 110228Front Frame Molding
√
√
Part # 110137Cover Tee with
.25 Return
√
√
Part # 110192Front Frame
with Lip
√
Part # 110106Mullion
√
√
Part # 110220Face Frame Mullion
√
Part # 110061Jamb
√
√
Part # 110216Door Stop Jamb
√
√
34678_HardwareBrochure_CS5.indd 20 2/8/11 3:46 PM
19.1
1 9.1
1 9.1
23.8 22.222.2
22.2
22.2
27.0
9.5
15.1
25.4 25.4
34.1
34.1
12.7
7.9
30.2
www.insidealuminium.com
Stylmark Hardware and Accessories 21
Flexible•Collaborative•Transformative•Solutions
Miscellaneous
√ = finished surfaceDrawings are not to scale
Part # 110197
Panel
Part # 110196 Part # 110198Face Frame
√
√
Part # 110300Extended Face Frame√
Part # 110268
Part # 110403
√
Part # 110674Shelf Sign
√
Part # 110346Frame Clip
√
√
34678_HardwareBrochure_CS5.indd 21 2/8/11 3:46 PM
36.5
14.3
14.3
14.3
15.9
15.9
15.9
15.9
15.9
Transparency Frame Z-Strip for 12.7 of 9.5
17.5
17.5
22.2
22.2
11.1 47.6
Z-Strip for 6.4 Panel
9.5 Face Frame
28.6
9.5
20.6
44.5
0044 (0) 1903 893992
22 Stylmark Hardware and Accessories
Miscellaneous
√ = finished surfaceDrawings are not to scale
Part # 110026Edge Molding
With Holes: Part #419020Without Holes: Part #224007
Unequal Legs Without Holes: Part #310351
With Holes: Part #224008Without Holes: Part #224009
√
Part # 110341Edge Molding
with Leg
√
√
PART #110153HEAVY DUTY MOLDING
PART #1106503/8" GLASS CHANNEL
Part # 110153Heavy Duty Molding
√
Part # 110164Hinge Plate
Part # 110204Heavy Duty Hinge Strip
Part # 110156Hinge Molding
√
√
√ √
√ √
34678_HardwareBrochure_CS5.indd 22 2/8/11 3:46 PM
11.1
11.1
11.1
11.1
14.3 14.3
14.3
38.1
28.6 18.3
1.6
3.2
27.8
25.4 Piano Hinge* 38.1 Piano Hinge* 31.8 Piano Hinge with*
6.4
12.7
6.4
19.1 19.1
Notes: •*Stocklengthforpianohingesis2.44m.
6.4
12.7
www.insidealuminium.com
Stylmark Hardware and Accessories 23
Flexible•Collaborative•Transformative•Solutions
Miscellaneous
Part # 110195Security Top & Side
Glass Support
Part # 110124*Base Channel
110125*Glazing Channel
Part # 110432
√
Part # 110119Security Channel
√
√
√
*Part # 110537
Part # 110122Top and Side Glass
Support
√ √Part # 110394
√
Part # 110395
√
Notes: •*Partnumbers110124and110125uses#119004glazingvinyl. •*Part#110537isspecialorder
√ √
34678_HardwareBrochure_CS5.indd 23 2/8/11 3:46 PM
6.4 Glass Shelf Edging 9.5 Glass Shelf 25.4 Diameter Half Round Edging w/ 9.5 Channel
9.5
9.5
9.5
9.5
9.5
25.4 25.4
12.7
25.4
15.9 Half Round w/Leg
7.9
23.8
1.6 25.4
12.7
15.9
14.3
25.4
12.7
50.8 50.8
6.4
12.7
0044 (0) 1903 893992
24 Stylmark Hardware and Accessories
Miscellaneous
√ = finished surfaceDrawings are not to scale
Part # 119001 Part # 119003-01
Part # 119003-02
Part # 119004
Use with glass from
Three ribs inside bottom of tape.
Two ribs inside bottom of tape.
Use with glass from
No ribs inside bottom of tape.
Part # 110181135˚Molding
Part # 110426Glass End Stock Endcap
√
√√ 135°
DIAMETERPART #FELT TAPE
34678_HardwareBrochure_CS5.indd 24 2/8/11 3:46 PM
4.8 Black Vinyl Glazing Tape 5.6 Black Vinyl Glazing Tape
5.6 Gray Vinyl Glazing Tape
6.4 Black Vinyl Glazing Tape
Use with glass from 4.6 - 5.1 mm thick. 5.9 - 6.4 mm thick.
5.5 - 5.9 mm thick.
226010-01 (gray) 19.1 x 1.6 x 3352.8
226010-03 (beige) 19.1 x 1.6 x 3352.8
226011-01 (gray) 44.5 x 1.6 x 2133.6
226011-03 (beige) 44.5 x 1.6 x 2133.6
226012-01 (gray) 30.2 x 1.6 x 2133.6
226012-03 (beige) 30.2 x 1.6 x 2133.6
226027-01 (gray) 14.3 x 1.6 x 2438.4
19.1 7.9
11.1
3.2
68.3
www.insidealuminium.com
Architectural Trim & Moldings
Backlit Displays & Transparency Frames
Complete Solutions & Specialty Fixtures
Fitting Room Systems & Mirror Kits
Framing & Partition Systems
Hardware & Accessories
Shelving
Showcases
Flexible•Collaborative•Transformative•Solutions
For companies that need more than “just the components”, Stylmark is a versatile manufacturer that creates the
spectrum of essential elements – to create comprehensive and distinctive lifestyle environments.
34678_HardwareBrochure_CS5.indd 25 2/8/11 3:46 PM