Stuttgart_2011_GEV_(3)

7
Industrial Vision Days Forum at VISION Stuttgart 2011 GigE Vision 2.0 Standard Update Eric Carey GigE Vision committee chair R&D Director, Teledyne DALSA

description

Gige vision protocol for basler cameras

Transcript of Stuttgart_2011_GEV_(3)

Page 1: Stuttgart_2011_GEV_(3)

Industrial Vision Days Forum at VISION Stuttgart 2011

GigE Vision 2.0

Standard Update

Eric Carey

GigE Vision committee chair

R&D Director, Teledyne DALSA

Page 2: Stuttgart_2011_GEV_(3)

Industrial Vision Days Forum at VISION Stuttgart 2011

Faster

A faster clock: brute force approach

• 10-fold speed increase with 10GigE!

Combine multiple cables: Link Aggregation

• Speed increase proportional to number of cables

Regulate the flow: PAUSE handshake

• Momentarily stop transmission when destination is

overwhelmed

• Helps reduce occurrence of packet retransmission

Page 3: Stuttgart_2011_GEV_(3)

Industrial Vision Days Forum at VISION Stuttgart 2011

Smaller

Reduce amount of data: Image Compression

• Support for JPEG, JPEG 2000 and H.264

• 10-fold data reduction possible with limited visible distortion

All-in transmission mode: one image in one packet

• Useful with jumbo packets

• Reduces overhead for small images

• Could be used for linescan cameras (one packet per line)

Page 4: Stuttgart_2011_GEV_(3)

Industrial Vision Days Forum at VISION Stuttgart 2011

Synchronization

Multi-camera systems: operate from same time source

IEEE 1588 (Precision Time Protocol)

• Synchronize device internal clock to network master clock

• Precision up to 1 µs possible

• Sources the GigE Vision 64-bit timestamp

Scheduled actions

• Trigger image acquisition on all cameras at a precise time in the

future

• Low jitter, but latency dictated by network delays

Page 5: Stuttgart_2011_GEV_(3)

Industrial Vision Days Forum at VISION Stuttgart 2011

Sensor

Support for Multi-tap source

• No need for raster-scan image reconstruction inside camera

• Divide image in horizontal bands

• Each band is raster-scan

• But bands can be transmitted out of order

Tap 1readout

Tap 2readout

Zone 0

Zone 1

Top-down packet transmission

for zone 0

Top-down packet transmission

for zone 1

Page 6: Stuttgart_2011_GEV_(3)

Industrial Vision Days Forum at VISION Stuttgart 2011

Pixels

Pixel Format Naming Convention 1.0

• Re-usability across Machine Vision camera standards

• Used by GigE Vision and CLHS

• Plan to be used by CoaXPress and USB3 Vision

• Separate document maintained by AIA

GigE Vision 2.0: More pixel formats

• Support for 1-bit, 2-bit and 4-bit monochrome pixel format

• YCbCr pixel format supporting ITU BT.601 and ITU BT.709

Page 7: Stuttgart_2011_GEV_(3)

Industrial Vision Days Forum at VISION Stuttgart 2011

Tools

Validation Framework: Coverage aligned with GigE Vision 1.2

Wireshark Dissector: Decode GigE Vision packets