Structural Steel

Since the expansion of railroads and the creation of the first skyscraper in Chicago of 1885, using steel as a structural framework and foundation solution has continued to reach new heights and amaze builders with its longevity, strength and flexibility. Combined with other modern inventions like Reinforced Concrete and Light Gauge Steel Framing, structural steel pieces are engineered to stand the test of time, and at a fraction of the weight of traditional construction materials. At APAC Buildings, the versatility of structural steel allows us to provide a range of modular, customizable framework and foundation pieces for your housing designs, all within in time-conservative, efficient and cost-reduced terms. Being both easy to raise and fix, as well as manufacture in-house, working with structural steel allows the designer to concentrate on maximizing aesthetics and actualize the client’s dream home.

WHY APAC STRUCTURAL STEEL? -

LONGEVITY & STRENGTH general strength and corrosion resistant with HDG Structural Steel has proven time and time again its ability to withstand extreme weather conditions, ranging from earthquakes and hurricanes to heavy snow and bushfires. By using high grade steel and galvanizing it with zinc, APAC Structural steel become both non-combustible and non-corrosive.

ADAPTABILITY With new technologies like FRAMECAD, APAC Structural Steel is always open to new technologies and party to new inventions or projects. By following the wave of the digital revolution, APAC Structural Steel has greatly benefited from innovations in modular technology and hybridization of materials to improve performance.

EASY INSTALLATION By pre-manufacturing many modular steel pieces, many APAC Structural Steel pieces come pre-shaped, pre-cut and pre-fixed together in order to reduce time spent altering and fastening on-site. Alongside detailed assembly plans, APAC Structural Steel is both time and cost efficient.

FLEXIBILITY & VERSATILITY At APAC Buildings, the multitude of uses for structural steel are realized between designing projects like hangers and warehouses through to housing and school facilities. APAC Structural Steel is incredibly versatile, and easily applicable to a variety of building projects.

SUSTAINABLE & EFFICIENT APAC Structural Steel is both light-weight and recyclable, making it the more sustainable and environmentally-friendly structural alternative. Similarly, its higher tensile strength per square inch means it is particularly space-savvy, creating the same structural element without compromising on available space

OUR PRODUCTS

FLOOR PANELS/BASES* Description: Galvanized Floor Frame Material: Lightweight Gauge Steel, with HDG Finish Contains: Pre-cut Bearers & Joists Accessories: TEK Screws & Brackets Dimensions seen below, with possibility of customization, depending on design needs.

Product Code Floor Panel Bearer Joist Loads

SS-01

Floor panel Type A

350 Mpa Steel, HDG, 600

gsm C156 3.0mm 60mm flange - Open

section 2998mm long

550 Mpa Steel HDG, 600 gsm C150 0.95 lipped section

2996mm long @350mm

MAX Floor Live load : 1.8kPA

Max Floor dead load :

0.5kPA

550 Mpa Steel HDG, 600 gsm C150 0.95 lipped section 2996mm long @400mm

SS-02

Floor panel Type B

350 Mpa Steel, HDG, 600

gsm C182 3.0mm 63mm flange - Open

section 2998mm long

550 Mpa Steel HDG, 600 gsm C150 0.95 lipped section

2996mm long @350mm

MAX Floor Live load : 4.0kPA

Max Floor dead load :

0.5kPA

550 Mpa Steel HDG, 600 gsm

C150 0.95 lipped section 2996mm long @400mm

COLUMNS + PIER HEADS* Description: Steel Pier Head Sleeves, built to fit 75x75 SHS Posts (Columns). Material: Structural Steel, with HDG finish and pre-cut holes for different floor panels or beams. Contains: Pier Head Sleeve. Accessories: Angle Brackets, Columns, 12G 14x45 Hex Head Screws. Columns and Pier Heads sold separately; accessories also not included.

Pier Head Types*

SS-03

Corner pier head PHA Stock# 50107-

PIH-00A

235 Mpa Steel, HDG,

600 gsm 190X190X8mm top plate

125mm long sleeve 5mm Thick

Supports floor panels at corners

SS-04

Central pier head PHB Stock# 50107-

PIH-00B

235 Mpa Steel, HDG,

600 gsm 220X220X8mm top plate

125mm long sleeve 5mm Thick

Supports floor panels at centres

SS-05

Central pier head PHC Stock# 50107-

PIH-00C

235 Mpa Steel, HDG,

600 gsm 270X220X8mm top plate

125mm long sleeve 5mm Thick

Supports floor panels at centres with an

extra beam

SS-06

Side pier head PHD Stock# 50107-

PIH-00D

235 Mpa Steel, HDG,

600 gsm 270X155X8mm top plate

125mm long sleeve 5mm Thick

Supports floor panels at building perimeter

Related Product*

SS-17

SHS Profile Stock# 50107-SHS-001

345 Mpa Steel, HDG, 600 gsm

75X75X4mm SHS

SHS profile suitable for columns

TOP HAT BATTENS* Description: Steel Roof Framing Top Hats Material: Lightweight Gauge Steel, with HDG Finish Contains: Top Hat Bars, used for support in Floor Panels and Roof Trusses. Accessories: Angle Brackets, Columns, 12G 14x45 Hex Head Screws. Columns and Pier Heads sold separately; accessories also not included

SS-07

22mm

Top Hat

0.42 BMT

550 MPa, 125 (g/m2) Zinc

Coating, 0.35 (kg/m) total mass

Ceiling - Wall

SS-08

40mm

Ceiling - Roof

SS-09

Top Hat

0.75 BMT

550 MPa, 125 (g/m2) Zinc

Coating, 0.91 (kg/m) total mass

Ceiling - Roof - Cyclonic

SS-10

61mm Top Hat

Roof - Cyclonic

C-SECTION STEEL *

SS-11

Steel C-Section (C Channel)

125 x 5, 1000mm, Q550, HDG

SS-12 125 x 5, 1350mm Q550, HDG

SS-13 125 x 5, 1800mm Q550, HDG

SS-14 125 x 5, 2000mm Q550, HDG

SS-15 125 x 5, 2400mm Q550, HDG

SS-16 125 x 5, 4200mm Q550 , HDG

BRACKETS & BRACING*

BR-01

Long Angle Bracket

75 x 75 x 3mm, 75mm Length; 235 Mpa Steel, 600gsm, HDG

Veranda Roof Beam Support

BR-02

Pryda Multi Grip

100 x 35 x 35 x 1.0mm; G300-Z275 Galvanised Steel, HDG

Connector for trusses to top plates and fixing joists to the faces of bearers

BR-03

Triple Grip - Left

115 x 40 x 60 x 1.0mm, step height: 73mm; G300-Z275 Galvanised Steel, HDG

Framing anchor for tie-down and right angle joints – carports, decks and pergolas.

BR-04

Triple Grip - Right

115 x 40 x 60 x 1.0mm, step height: 73mm; G300-Z275 Galvanised Steel, HDG

Framing anchor for tie-down and right angle joints – carports, decks and pergolas.

BR-05

M16 Column Bracing Kit

M16 Threaded Rod Z, 3500mm + M16 Turn Buckle + Cross Bracing Gusset Plate (5mm); All-inclusive set

Securing Cross Bracing Foundation Columns

* Custom dimensions and thicknesses are also available, once deemed appropriate to accommodate custom building designs.

* Data & Standards is indicative only and subject to confirmed requirements and/or batch testing.

DISCLAIMER:

This document is current as at January 2020 and supersedes all previous versions.

The material in this document is provided for general information purposes only.

Although all reasonable efforts have been made to ensure that the information is current, relevant and accurate as at the date of issue, the information provided is selective and may not be complete or suitable for your intended

use or jurisdiction.

No information in this document constitutes, or shall be relied upon as constituting, the giving of advice of any nature. Nor is any such information to be used as a substitute for (1) specific advice from appropriate independent

professional advisors in your jurisdiction regarding your particular facts and circumstances or (2) compliance with the requirements of applicable regulatory authorities, standards, regulations, laws, or building codes.

You should not act (or refrain from acting) based upon information provided by APAC® without independently verifying the original source information and, making your own independent assessment, with the assistance of

appropriate independent professional advisors, regarding your particular facts and circumstances.

APAC® makes no representation or warranty, express or implied, as to the accuracy, completeness or suitability for purpose, of any information in this document.

To the extent permitted by law, APAC® accepts no responsibility to the recipient or any other person for any loss, damage, cost or expense (whether direct or indirect and however caused, including by negligence) incurred and

arising out of or in connection with any use or reliance by any of them on the information in this document including, but not limited to, as a result of any error, omission or misrepresentation in any information or statement in

this document. This limitation of liability includes but is not limited to incidental, special or consequential damages, damages for loss of business or other profits. Liability which cannot legally be excluded is limited to the maximum

extent possible.” Any reproduction or dissemination of all or any part of this document is prohibited, except with the prior written consent of APAC® Ltd.

Product Corresponding Standard*

Floor Panels

AS 4100 - 1998 AS 5131 : 2016 AS 4792 : 2006

AS/NZS 1554.1: 2011 AWS D1.1 BS 4515

Pier Heads + Columns

AS 4100 - 1998 AS 5131 : 2016

AS 4792 : 2006 AS/NZS 1554.1: 2011 AWS D1.1 BS 4515

Top Hat Battens AS 1397 - 2011 ASTM A1092 - 15

Steel C-Section (Channel) AS/NZS 3679.1

Brackets & Bracing AS/NZS1170 AS4055-2006

+ 86 514 8633 0953 apacbuildingproducts.com sales@apacbuildingproducts.com