Strip Quality Check (SQC)/media/Wire/Files/Downloads... · The use of the SQC instead of the CPS...
1
THE WAY TO MAKE IT THE WAY TO MAKE IT The saving of values and images ensures traceability. The values can be read-out at a control center via the WPCS interface. The use of the SQC instead of the CPS option („cut pulled strands“) boosts the output by an average of 10 percent. The actual figure depends on conductor length and quality. Function The stripping quality check (SQC) entails visually moni- toring the stripping quality during the swivel movement. It measures the stripping length and checks the wire for projecting or splayed wires. Defective products are automatically removed. Actual and target values can be compared without ad- ditional teaching of article parts thanks to the integration of these functions in the machine software. The SQC is even capable of handling sequence production. Technical data Machine types Alpha 355, 355 S Conductor cross sections 0.13 - 6mm 2 (AWG 26 - AWG 10) Conductor lengths Full range Full or half strip max. 18mm (0.7in.) Resolution 1280×1024 (1.3MB pixels) Inspection window 24×16mm (0.9×0.6in.) Dimensions (W×H×D) 189×225×50mm (7.4×8.9×2.0in.) Requirements K9 computer or higher TopWin 13.2 or higher TopImage 13.4.1 or higher 0341952 – Version 0 Your benefits • Early detection of possible stripping problems • Enhancement of product quality • Traceability thanks to statistics, image saving and WPCS feedback • Easy integration in the production process wit- hout learning • Reduction of operator influence www.komaxwire.com Strip Quality Check (SQC)
Transcript of Strip Quality Check (SQC)/media/Wire/Files/Downloads... · The use of the SQC instead of the CPS...
THE WAY TO MAKE ITTHE WAY TO MAKE IT
The saving of values and images ensures traceability. The values can be read-out at a control center via the WPCS interface.
The use of the SQC instead of the CPS option („cut pulled strands“) boosts the output by an average of 10 percent. The actual figure depends on conductor length and quality.
FunctionThe stripping quality check (SQC) entails visually moni-toring the stripping quality during the swivel movement. It measures the stripping length and checks the wire for projecting or splayed wires. Defective products are automatically removed.
Actual and target values can be compared without ad-ditional teaching of article parts thanks to the integration of these functions in the machine software. The SQC is even capable of handling sequence production.
Technical data
Machine types Alpha 355, 355 S
Conductor cross sections 0.13 - 6mm2 (AWG 26 - AWG 10)
Conductor lengths Full range
Full or half strip max. 18mm (0.7in.)
Resolution 1280×1024 (1.3MB pixels)
Inspection window 24×16mm (0.9×0.6in.)
Dimensions (W×H×D)
189×225×50mm (7.4×8.9×2.0in.)
Requirements K9 computer or higherTopWin 13.2 or higherTopImage 13.4.1 or higher 03
4195
2 –
Vers
ion
0
Your benefits•Early detection of possible stripping problems•Enhancement of product quality• Traceability thanks to statistics, image saving and
WPCS feedback•Easy integration in the production process wit-
hout learning•Reduction of operator influence
www.komaxwire.com
Strip Quality Check (SQC)
