Strip packaging kvg
-
Upload
kaushal-gadariya -
Category
Engineering
-
view
250 -
download
0
Transcript of Strip packaging kvg
![Page 1: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/1.jpg)
WELCOME
![Page 2: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/2.jpg)
STRIP PACKAGING
PRESENTATIONON
KAUSHAL GADARIYA
SUBJECTFOOD PACKAGING TECHNOLOGY
![Page 3: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/3.jpg)
CONTENTS
1. Introduction2. Process of packaging3. Designing of strip4. Inspection of seal5. Material used for strip
packaging
![Page 4: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/4.jpg)
INTRODUCTION
Strip packaging is an alternate form of pack for a unit dosage.
It is a method of enclosing the article concerned between the two web of material so that each is contained between separate compartments.
The two web of material may not be necessary to be identical.
![Page 5: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/5.jpg)
![Page 6: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/6.jpg)
PROCESS OF PACKAGING
Two webs of materials being fed between two heated crimping rollers
On which they are circumferential cavities of a size and depth appropriate to the shape, size, and thickness of the article.
The article is being packed the material.
![Page 7: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/7.jpg)
The material is fed from a hopper through channels to drop between the crimping rollers.
The cavities present in the webs are sealed together by the activation of the thermoplastic coating on their inner surface and pockets.
At the end, pockets are formed around the contents.
![Page 8: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/8.jpg)
DESIGNING OF STRIP
Strip design are very basic, as the emerging units are invariably rectangular or square strip.
The pockets can round, oval or square shape.
The pocket area is depends on diameter, shape and thickness of product.
![Page 9: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/9.jpg)
If the pockets is too ‘tight’, it affect the - perforation of pockets - wrinkling of seal If the seal area likely to be wrinkle or
crease shown, then wider seals may be necessary.
Generally, the width of seal taken as 5mm and above.
![Page 10: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/10.jpg)
INSPECTION OF SEAL
To check the seal of packaging material either periphery of pockets is perforated or not, the heating of seals are very efficient method.
Samples strips are taken at regular interval and exposed them briefly.
After that get packaged material immersed in a water to a vacuum of about 680Mb.
![Page 11: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/11.jpg)
MATERIAL USED FOR STRIP PACKAGING
Material employing foil provides the best, excellent, protection provided and effective seal is achieved.
Two plastic pipes, each with a vacuumised foil, when laminated in direct contact with one another, it gives excellent barrier property.
![Page 12: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/12.jpg)
PET (POLYETHYLENE TEREPHTHALATE) is very resistant to tear, hence it needs a tear feature and also confers child resistance.
The most widely used material for excellent moisture protection are:
- Extrusion coated foil(12gram per sq.meter)
- paper with 40-50 gsm.. - Soft aluminum foil (7 – 9µm).
![Page 13: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/13.jpg)
• Extrusion coating process
![Page 14: Strip packaging kvg](https://reader036.fdocuments.us/reader036/viewer/2022083106/5872e6911a28abfa548b61df/html5/thumbnails/14.jpg)
THANK YOU